Materials Forming, Machining and Tribology – serie

Visar alla böcker i serien Materials Forming, Machining and Tribology. Handla med fri frakt och snabb leverans.

94 produkter

Kategorier

94 produkter

Innovations in Manufacturing for Sustainability
AvKapil Gupta
Inbunden, Engelska, 2019
1 302 kr
Skickas inom 10-15 vardagar
This book provides details on the innovations made to achieve sustainability in manufacturing. It highlights the trends of current progress in research and development being done to achieve overall sustainability in manufacturing technology. Green-EDM, Hybrid machining, MQL assisted machining, sustainable casting, welding, finishing and casting, energy- and resource-efficient manufacturing are some of the important topics discussed in this book.
Measurement in Machining and Tribology
AvJ. Paulo Davim
Inbunden, Engelska, 2019
1 086 kr
Skickas inom 10-15 vardagar
This book presents the research advances in the science of measurement, giving special focus to the field of machining and tribology. Topics such as dimensional metrology, precision measurements, industrial metrology, accuracy and precision in measurement are covered. Also theoretical aspects such as modelling and simulation are highlighted.
Fractal Approach to Tribology of Elastomers
AvAhad Kh Janahmadov,Maksim Javadov
Häftad, Engelska, 2019
1 734 kr
Skickas inom 10-15 vardagar
This book summarizes the results of years of research on the problem of strength and fracture of polymers and elastomers. It sets out the modern approach to the strength theory from the standpoint of fractals, the kinetic and thermodynamic theories as well as the meso-mechanic destruction. The dimension reduction method is applied to model the friction processes in elastomers subjected to the complex dynamic loading. Finally, it analyses a relation between the fracture mechanism and the relation phenomena, and provides new experimental data on the sealing nodes in accordance with their specific working conditions where the effect of self-sealing is observed.
Machining Difficult-to-Cut Materials
Basic Principles and Challenges
AvHossam A. Kishawy,Ali Hosseini
Häftad, Engelska, 2019
1 734 kr
Skickas inom 10-15 vardagar
This book focus on the challenges faced by cutting materials with superior mechanical and chemical characteristics, such as hardened steels, titanium alloys, super alloys, ceramics and metal matrix composites. Aspects such as costs and appropriate machining strategy are mentioned. The authors present the characteristics of the materials difficult to cut and comment on appropriate cutting tools for their machining. This book also serves as a reference tool for manufacturers working in industry.
Micro and Nano Machining of Engineering Materials
Recent Developments
AvKaushik Kumar,Divya Zindanim. fl.
Häftad, Engelska, 2019
1 086 kr
Skickas inom 10-15 vardagar
This book covers the recent developments in the production of micro and nano size products, which cater to the needs of the industry. The processes to produce the miniature sized products with unique characteristics are addressed. Moreover, their application in areas such as micro-engines, micro-heat exchangers, micro-pumps, micro-channels, printing heads and medical implants are also highlighted. The book presents such microsystem-based products as important contributors to a sustainable economy. The recent research in this book focuses on the development of new micro and nano manufacturing platforms while integrating the different technologies to manufacture the micro and nano components in a high throughput and cost effective manner. The chapters contain original theoretical and applied research in the areas of micro- and nano-manufacturing that are related to process innovation, accuracy, and precision, throughput enhancement, material utilization, compact equipment development, environmental and life-cycle analysis, and predictive modeling of manufacturing processes with feature sizes less than one hundred micrometers.
Introduction to Mechanical Engineering
AvJ. Paulo Davim
Häftad, Engelska, 2019
708 kr
Skickas inom 10-15 vardagar
This textbook fosters information exchange and discussion on all aspects of introductory matters of modern mechanical engineering from a number of perspectives including: mechanical engineering as a profession, materials and manufacturing processes, machining and machine tools, tribology and surface engineering, solid mechanics, applied and computational mechanics, mechanical design, mechatronics and robotics, fluid mechanics and heat transfer, renewable energies, biomechanics, nanoengineering and nanomechanics. At the end of each chapter, a list of 10 questions (and answers) is provided.
Electromagnetic Metal Forming for Advanced Processing Technologies
AvYuriy Batygin,Marina Barbashovam. fl.
Häftad, Engelska, 2019
1 194 kr
Skickas inom 10-15 vardagar
This book focuses on the new direction of magnetic pulsed metal working by attraction of sheet metals. In the first part, the authors focus on the magnetic pulsed pressure for forming of inner angles in the sheet metals. Part 2 of the book presents the magnetic pulsed attraction of thin-walled metals. In the third and last part, the authors present the practical realization of external restoring the dents on the car bodies by electromagnetic metal forming attraction.
Advanced Machining and Manufacturing Processes
AvKaushik Kumar,Divya Zindanim. fl.
Häftad, Engelska, 2018
1 086 kr
Skickas inom 10-15 vardagar
This book covers the various advanced manufacturing processes employed by manufacturing industries to improve their productivity in terms of socio-economic development.The authors present automated conventional and non-conventional machining techniques as well as virtual machining principles and techniques. Material removal by mechanical, chemical, thermal and electrochemical processes are described in detail. A glossary of key concepts is attached at end of the book.
Near Net Shape Manufacturing Processes
AvKapil Gupta
Inbunden, Engelska, 2019
1 086 kr
Skickas inom 10-15 vardagar
This book covers the mechanism, salient features, and important aspects of various subtractive, additive, forming and hybrid techniques to manufacture near net-shaped products. The latest research in this area as well as possible future research are also highlighted.
Materials Forming, Machining and Post Processing
AvKapil Gupta
Inbunden, Engelska, 2019
1 086 kr
Skickas inom 10-15 vardagar
This book provides a detailed understanding of various forming, machining, and post processing techniques. Working principle, process mechanism, salient features and latest developments are primarily focused. It presents some basic and specialized processes to produce quality engineered parts. This book also incorporates some investigations on modelling, simulation and optimization of the aforementioned processes to improve quality and performance, productivity, and sustainability.
Materials Forming, Machining and Post Processing
AvKapil Gupta
Häftad, Engelska, 2020
1 086 kr
Skickas inom 10-15 vardagar
This book provides a detailed understanding of various forming, machining, and post processing techniques. Working principle, process mechanism, salient features and latest developments are primarily focused. It presents some basic and specialized processes to produce quality engineered parts. This book also incorporates some investigations on modelling, simulation and optimization of the aforementioned processes to improve quality and performance, productivity, and sustainability.
Materials and Manufacturing Processes
AvKaushik Kumar,Hridayjit Kalitam. fl.
Inbunden, Engelska, 2019
1 086 kr
Skickas inom 10-15 vardagar
This book introduces the materials and traditional processes involved in the manufacturing industry. It discusses the properties and application of different engineering materials as well as the performance of failure tests. The book lists both destructible and non-destructible processes in detail. The design associated with each manufacturing processes, such Casting, Forming, Welding and Machining, are also covered.
Materials and Manufacturing Processes
AvKaushik Kumar,Hridayjit Kalitam. fl.
Häftad, Engelska, 2020
1 086 kr
Skickas inom 10-15 vardagar
This book introduces the materials and traditional processes involved in the manufacturing industry. It discusses the properties and application of different engineering materials as well as the performance of failure tests. The book lists both destructible and non-destructible processes in detail. The design associated with each manufacturing processes, such Casting, Forming, Welding and Machining, are also covered.
CNC Programming for Machining
AvKaushik Kumar,Chikesh Ranjanm. fl.
Inbunden, Engelska, 2020
1 949 kr
Skickas inom 10-15 vardagar
The book is basically written with a view to project Computer Numerical Control Programming (CNC) Programming for machines. This book shows how to write, read and understand such programs for modernizating manufacturing machines. It includes topics such as different programming codes as well as different CNC machines such as drilling and milling.
CNC Programming for Machining
AvKaushik Kumar,Chikesh Ranjanm. fl.
Häftad, Engelska, 2021
1 949 kr
Skickas inom 10-15 vardagar
The book is basically written with a view to project Computer Numerical Control Programming (CNC) Programming for machines. This book shows how to write, read and understand such programs for modernizating manufacturing machines. It includes topics such as different programming codes as well as different CNC machines such as drilling and milling.
Cold Spray in the Realm of Additive Manufacturing
AvSunil Pathak,Gobinda C. Saha
Inbunden, Engelska, 2020
1 842 kr
Skickas inom 10-15 vardagar
This book sheds light on the development of the cold spray process in applications of additive manufacturing (AM) and repair/remanufacturing engineering. It covers the process fundamentals of different cold spray techniques, namely low pressure cold spray and high pressure cold spray process. Bonding mechanism and powder substrate interface are an important part of the book. The chapters present the recent developments in materials used in cold spraying for AM and various coating applications. The latest research in this area as well as possible avenues of future research are also highlighted as a way to encourage the researchers.
Cold Spray in the Realm of Additive Manufacturing
AvSunil Pathak,Gobinda C. Saha
Häftad, Engelska, 2021
1 842 kr
Skickas inom 10-15 vardagar
This book sheds light on the development of the cold spray process in applications of additive manufacturing (AM) and repair/remanufacturing engineering. It covers the process fundamentals of different cold spray techniques, namely low pressure cold spray and high pressure cold spray process. Bonding mechanism and powder substrate interface are an important part of the book. The chapters present the recent developments in materials used in cold spraying for AM and various coating applications. The latest research in this area as well as possible avenues of future research are also highlighted as a way to encourage the researchers.
Advances in Abrasive Based Machining and Finishing Processes
AvS. Das,G. Kibriam. fl.
Inbunden, Engelska, 2020
1 626 kr
Skickas inom 10-15 vardagar
This book presents the advances in abrasive based machining and finishing in broad sense. Specifically, the book covers the novel machining and finishing strategies implemented in various advanced machining processes for improving machining accuracy and overall quality of the product. This book presents the capability of advanced machining processes using abrasive grain. It also covers ways for enhancing the production rate as well as quality. It fulfills the gap between the production of any complicated components and successful machining with abrasive particles.
Advances in Abrasive Based Machining and Finishing Processes
AvS. Das,G. Kibriam. fl.
Häftad, Engelska, 2021
1 626 kr
Skickas inom 10-15 vardagar
This book presents the advances in abrasive based machining and finishing in broad sense. Specifically, the book covers the novel machining and finishing strategies implemented in various advanced machining processes for improving machining accuracy and overall quality of the product. This book presents the capability of advanced machining processes using abrasive grain. It also covers ways for enhancing the production rate as well as quality. It fulfills the gap between the production of any complicated components and successful machining with abrasive particles.
Tribology in Materials and Applications
AvJitendra Kumar Katiyar,P. Ramkumarm. fl.
Inbunden, Engelska, 2020
1 626 kr
Skickas inom 10-15 vardagar
This book broadens the knowledge of tribology. This book is evolved out of current research trends on tribological performance of systems related to nano tribology, rheology, engines, polymer brushes, composite materials, erosive wear and lubrication. The book deals with enhancing the ideas on tribological properties, the different types of wear phenomenon and lubrication enhancement. Further, the tribological performance of systems, whether nano, micro or macro-scale, depends upon a large number of external parameters and important among them are temperature, contact pressure and relative speed. Thus, the book focus on the theoretical aspects to industrial applications of tribology.
Tribology in Materials and Applications
AvJitendra Kumar Katiyar,P. Ramkumarm. fl.
Häftad, Engelska, 2021
1 626 kr
Skickas inom 10-15 vardagar
This book broadens the knowledge of tribology. This book is evolved out of current research trends on tribological performance of systems related to nano tribology, rheology, engines, polymer brushes, composite materials, erosive wear and lubrication. The book deals with enhancing the ideas on tribological properties, the different types of wear phenomenon and lubrication enhancement. Further, the tribological performance of systems, whether nano, micro or macro-scale, depends upon a large number of external parameters and important among them are temperature, contact pressure and relative speed. Thus, the book focus on the theoretical aspects to industrial applications of tribology.
Intelligent Manufacturing
AvSunil Pathak
Inbunden, Engelska, 2020
1 086 kr
Skickas inom 10-15 vardagar
This book sheds light on the development of traditional and advanced optimization methods. Their use in various tradition and non-tradition manufacturing and machining processes for an improved manufacturability is reported. This includes key elements of implementing conventional statistical methods, multi-objective and multi-criteria decision-making methods and evolution of single and multi-target optimization techniques using soft computing to enhance production performance, efficiency and sustainability in manufacturing. The latest research in this area as well as possible avenues of future research are also highlighted.
Intelligent Manufacturing
AvSunil Pathak
Häftad, Engelska, 2021
1 086 kr
Skickas inom 10-15 vardagar
This book sheds light on the development of traditional and advanced optimization methods. Their use in various tradition and non-tradition manufacturing and machining processes for an improved manufacturability is reported. This includes key elements of implementing conventional statistical methods, multi-objective and multi-criteria decision-making methods and evolution of single and multi-target optimization techniques using soft computing to enhance production performance, efficiency and sustainability in manufacturing. The latest research in this area as well as possible avenues of future research are also highlighted.
Coatings
Materials, Processes, Characterization and Optimization
AvKaushik Kumar,B. Sridhar Babum. fl.
Inbunden, Engelska, 2021
1 842 kr
Skickas inom 10-15 vardagar
This book presents recent developments in the coating processes, sub processes and emphasizes on processes with the potential to improve performance quality and reproducibility. The book demonstrates how application methods, environmental factors, and chemical interactions affect each surface coating's performance. In addition, it provides analysis of latest polymers, carbon resins, high-temperature materials used for coatings and describes the development, chemical and physical properties, synthesis, polymerization, commercial uses and characteristics for each raw material and coating. Characterization techniques to solve the coating problems are also presented, as well as optimization studies to identify the critical coating parameters to ensure a robust process.
Coatings
Materials, Processes, Characterization and Optimization
AvKaushik Kumar,B. Sridhar Babum. fl.
Häftad, Engelska, 2022
1 842 kr
Skickas inom 10-15 vardagar
This book presents recent developments in the coating processes, sub processes and emphasizes on processes with the potential to improve performance quality and reproducibility. The book demonstrates how application methods, environmental factors, and chemical interactions affect each surface coating's performance. In addition, it provides analysis of latest polymers, carbon resins, high-temperature materials used for coatings and describes the development, chemical and physical properties, synthesis, polymerization, commercial uses and characteristics for each raw material and coating. Characterization techniques to solve the coating problems are also presented, as well as optimization studies to identify the critical coating parameters to ensure a robust process.
Welding Technology
AvJ. Paulo Davim
Inbunden, Engelska, 2021
1 842 kr
Skickas inom 10-15 vardagar
This book presents some developments in the field of welding technology. It starts with classical welding concepts, covering then new approaches. Topics such as ultrasonic welding, robots welding, welding defects and welding quality control are presented in a clear, didactic way. Lower temperature metal-joining techniques such as brazing and soldering are highlighted as well.
Welding Technology
AvJ. Paulo Davim
Häftad, Engelska, 2022
1 842 kr
Skickas inom 10-15 vardagar
This book presents some developments in the field of welding technology. It starts with classical welding concepts, covering then new approaches. Topics such as ultrasonic welding, robots welding, welding defects and welding quality control are presented in a clear, didactic way. Lower temperature metal-joining techniques such as brazing and soldering are highlighted as well.
Fused Deposition Modeling Based 3D Printing
AvHarshit K. Dave,J. Paulo Davim
Inbunden, Engelska, 2021
2 165 kr
Skickas inom 10-15 vardagar
This book covers 3D printing activities by fused deposition modeling process. The two introductory chapters discuss the principle, types of machines and raw materials, process parameters, defects, design variations and simulation methods. Six chapters are devoted to experimental work related to process improvement, mechanical testing and characterization of the process, followed by three chapters on post-processing of 3D printed components and two chapters addressing sustainability concerns. Seven chapters discuss various applications including composites, external medical devices, drug delivery system, orthotic inserts, watertight components and 4D printing using FDM process. Finally, six chapters are dedicated to the study on modeling and optimization of FDM process using computational models, evolutionary algorithms, machine learning, metaheuristic approaches and optimization of layout and tool path.
Fused Deposition Modeling Based 3D Printing
AvHarshit K. Dave,J. Paulo Davim
Häftad, Engelska, 2022
2 165 kr
Skickas inom 10-15 vardagar
This book covers 3D printing activities by fused deposition modeling process. The two introductory chapters discuss the principle, types of machines and raw materials, process parameters, defects, design variations and simulation methods. Six chapters are devoted to experimental work related to process improvement, mechanical testing and characterization of the process, followed by three chapters on post-processing of 3D printed components and two chapters addressing sustainability concerns. Seven chapters discuss various applications including composites, external medical devices, drug delivery system, orthotic inserts, watertight components and 4D printing using FDM process. Finally, six chapters are dedicated to the study on modeling and optimization of FDM process using computational models, evolutionary algorithms, machine learning, metaheuristic approaches and optimization of layout and tool path.
Experiments and Simulations in Advanced Manufacturing
AvPanagiotis Kyratsis,J. Paulo Davim
Inbunden, Engelska, 2021
1 734 kr
Skickas inom 10-15 vardagar
This book presents the latest advances in manufacturing from both the experimental and simulation point of view. It covers most aspects of manufacturing engineering, i.e. theoretical, analytical, computational and experimental studies. Experimental studies on manufacturing processes require funds, time and expensive facilities, while numerical simulations and mathematical models can improve the efficiency of using the research results. It also provides high level of prediction accuracy and the basis for novel research directions.

Materials Forming, Machining and Tribology – serie

Innovations in Manufacturing for Sustainability

Measurement in Machining and Tribology

Fractal Approach to Tribology of Elastomers

Machining Difficult-to-Cut Materials

Micro and Nano Machining of Engineering Materials

Introduction to Mechanical Engineering

Electromagnetic Metal Forming for Advanced Processing Technologies

Advanced Machining and Manufacturing Processes

Near Net Shape Manufacturing Processes

Materials Forming, Machining and Post Processing

Materials Forming, Machining and Post Processing

Materials and Manufacturing Processes

Materials and Manufacturing Processes

CNC Programming for Machining

CNC Programming for Machining

Cold Spray in the Realm of Additive Manufacturing

Cold Spray in the Realm of Additive Manufacturing

Advances in Abrasive Based Machining and Finishing Processes

Advances in Abrasive Based Machining and Finishing Processes

Tribology in Materials and Applications

Tribology in Materials and Applications

Intelligent Manufacturing

Intelligent Manufacturing

Coatings

Coatings

Welding Technology

Welding Technology

Fused Deposition Modeling Based 3D Printing

Fused Deposition Modeling Based 3D Printing

Experiments and Simulations in Advanced Manufacturing