Springer Tracts in Additive Manufacturing – serie
Visar alla böcker i serien Springer Tracts in Additive Manufacturing. Handla med fri frakt och snabb leverans.
25 produkter
25 produkter
1 924 kr
Skickas inom 10-15 vardagar
This book systematically describes the status quo and future development of cold spray additive manufacturing technology.
1 924 kr
Skickas inom 10-15 vardagar
This book systematically describes the status quo and future development of cold spray additive manufacturing technology.
2 137 kr
Skickas inom 10-15 vardagar
Furthermore, producing the feedstock using waste materials will help to reduce the cost of the processing material, productivity and eco-friendliness of this manufacturing technology.
2 137 kr
Skickas inom 10-15 vardagar
Furthermore, producing the feedstock using waste materials will help to reduce the cost of the processing material, productivity and eco-friendliness of this manufacturing technology.
1 924 kr
Skickas inom 10-15 vardagar
This book presents the history, fundamentals, process development, applications, post-processing, and experimental results from additive manufacturing. This book also presents content on simulation, modeling, and optimization of materials processing and surface engineering techniques.
1 924 kr
Skickas inom 10-15 vardagar
This book presents the history, fundamentals, process development, applications, post-processing, and experimental results from additive manufacturing. This book also presents content on simulation, modeling, and optimization of materials processing and surface engineering techniques.
539 kr
Skickas inom 10-15 vardagar
This open access book gives both a theoretical and practical overview of several important aspects of additive manufacturing (AM). This is followed by a chapter with practical insights into how AM materials and processing parameters are developed for both material extrusion and powder bed fusion.
433 kr
Skickas inom 10-15 vardagar
This open access book gives both a theoretical and practical overview of several important aspects of additive manufacturing (AM). This is followed by a chapter with practical insights into how AM materials and processing parameters are developed for both material extrusion and powder bed fusion.
2 350 kr
Skickas inom 10-15 vardagar
This book contains selected papers from the conference CASICAM'22, presenting the latest advancements and discoveries in Additive Manufacturing (AM) technology. The chapters cover a wide range of topics related to AM, including design for additive manufacturing, functionally graded additive manufacturing (FGAM), new and innovative materials for AM, AM parts/processes modeling and simulation, AM process optimization, monitoring, and qualification, 4D printing, AM post-processing operations, AM product metrology and quality control, AM standards and certification, health, safety, and environment challenges, education, training, and research strategy, and AM applications and challenges.
2 350 kr
Skickas inom 10-15 vardagar
This book contains selected papers from the conference CASICAM'22, presenting the latest advancements and discoveries in Additive Manufacturing (AM) technology. The chapters cover a wide range of topics related to AM, including design for additive manufacturing, functionally graded additive manufacturing (FGAM), new and innovative materials for AM, AM parts/processes modeling and simulation, AM process optimization, monitoring, and qualification, 4D printing, AM post-processing operations, AM product metrology and quality control, AM standards and certification, health, safety, and environment challenges, education, training, and research strategy, and AM applications and challenges.
2 989 kr
Skickas inom 10-15 vardagar
This book contains selected papers presented at the second international Conference on Progress in Digital and Physical Manufacturing (ProDPM'21), organized by the School of Technology and Management (ESTG) of the Polytechnic Institute of Leiria (IPL), from the 27th to 29th of October 2021. It represents a significant contribution to the current advances in digital and physical manufacturing issues as it contains topical research in this field.The book is an essential reading for all of those working on digital and physical manufacturing, promoting better links between the academia and the industry. The conference papers cover a wide range of important topics like biomanufacturing, advanced rapid prototyping technologies, rapid tooling and manufacturing, micro-fabrication, 3D CAD and data acquisition, and collaborative design.
2 989 kr
Skickas inom 10-15 vardagar
This book contains selected papers presented at the second international Conference on Progress in Digital and Physical Manufacturing (ProDPM'21), organized by the School of Technology and Management (ESTG) of the Polytechnic Institute of Leiria (IPL), from the 27th to 29th of October 2021.
1 981 kr
Skickas inom 10-15 vardagar
The fourth part of the book is dedicated to the medical applications of additive manufacturing, covering areas ranging from orthopaedic surgeries to materials used in medical AM.Overall, the book provides insight into the current state of the science and applications of additive manufacturing.
1 981 kr
Skickas inom 10-15 vardagar
The fourth part of the book is dedicated to the medical applications of additive manufacturing, covering areas ranging from orthopaedic surgeries to materials used in medical AM.Overall, the book provides insight into the current state of the science and applications of additive manufacturing.
2 989 kr
Skickas inom 10-15 vardagar
This book presents the Proceedings of the 3rd conference on Additive Manufacturing in Products and Applications AMPA2023, a conference that brought together engineers, designers, and managers to exchange ideas and knowledge on how to support real-world value chains by developing additive manufactured serial products.
2 989 kr
Skickas inom 10-15 vardagar
This book presents the Proceedings of the 3rd conference on Additive Manufacturing in Products and Applications AMPA2023, a conference that brought together engineers, designers, and managers to exchange ideas and knowledge on how to support real-world value chains by developing additive manufactured serial products.
1 924 kr
Skickas inom 10-15 vardagar
This book elucidates the fundamental thermomechanical behaviour inherent in the 3D printing process within a laser-based powder bed fusion (L-PBF) system. The authors leverage the theory of axially moving materials, a framework previously employed in the analysis of production processes within the process industry.
1 924 kr
Skickas inom 10-15 vardagar
This book elucidates the fundamental thermomechanical behaviour inherent in the 3D printing process within a laser-based powder bed fusion (L-PBF) system. The authors leverage the theory of axially moving materials, a framework previously employed in the analysis of production processes within the process industry.
2 350 kr
Skickas inom 10-15 vardagar
This book presents the dynamic advancements achieved in Construction 3D Printing, showcasing a wealth of insights from the conference held from 19-21 July 2023 at Nanyang Technological University (NTU), Singapore.
2 350 kr
Skickas inom 10-15 vardagar
This book presents the dynamic advancements achieved in Construction 3D Printing, showcasing a wealth of insights from the conference held from 19-21 July 2023 at Nanyang Technological University (NTU), Singapore. Covering a broad spectrum of topics, this volume presents research on established technologies, modeling, simulation, diverse materials (including recycled and geopolymer materials), fiber reinforcement, and composite materials, as well as testing protocols and standards. It also delves into applications, Building Information Modeling (BIM), design methodologies, optimization strategies, structural considerations, intelligent monitoring, and the role of robotics and automation. Serving as a timely and invaluable resource, this book offers both scholars and professionals in the expansive field of Construction 3D Printing profound insights into its decade-long progress and its preparedness for wider adoption.
539 kr
Skickas inom 10-15 vardagar
This open access book presents 12 years of cutting-edge research on additive manufacturing (AM), with a focus on innovative powder- and beam-based techniques. Developed through the Collaborative Research Center 814 at Friedrich-Alexander-Universität Erlangen-Nürnberg, it explores the use of laser and electron beams in transforming metal and polymer materials.From advanced strategies for selective laser melting to mesoscopic simulations of beam melting processes, this book offers a deep dive into the science behind AM. Key topics include the development of lightweight composite materials, efficient multi-material manufacturing, and optimal design of multifunctional hybrid components.Readers will also discover pioneering approaches to selective electron beam melting, reactive liquid systems for plastics, and tailored material characterization techniques. In addition, the book explores macroscopic modeling and geometric testing methods, offering new insights into the future of AM technologies.By combining theoretical advancements with practical applications, this volume serves as an essential resource for researchers and professionals in the field of additive manufacturing.
3 521 kr
Skickas inom 10-15 vardagar
This book features a selection of papers presented at the 8th International Congress on 3D Printing Technologies and Digital Industry 2024 (3D-PTC2024), held from September 6–8, 2024, in Antalya, Türkiye, in a hybrid format.
2 190 kr
Skickas inom 5-8 vardagar
This book provides an in-depth analysis of current advancements in bio-additive manufacturing. The book covers a wide range of topics, including biomaterials, smart manufacturing of implants, medical interventions, post-processing techniques, and bio-printing of tissues and organs.
- Nyhet
Additive Manufacturing Technologies
Selected Papers from 3DPTC2025 - Volume 1
Inbunden, Engelska, 2026
2 456 kr
Skickas inom 10-15 vardagar
This book presents a diverse collection of research contributions from the 9th International Congress on 3D Printing Technologies and Digital Industry 2025 (3DPTC2025), showcasing the rapidly evolving landscape of additive manufacturing, digital design, and smart production. Covering innovations ranging from advanced materials—such as nanoparticle‑reinforced composites, recycled polymers, PEEK, and metal powders—to AI‑driven process optimization and real‑time defect detection, the chapters highlight progress in mechanical engineering, sustainable manufacturing, biomedical applications, and industrial integration. The book features studies on renewable‑energy‑powered systems, improved thermal and structural performance, immersive VR-based educational tools, and design strategies for next‑generation 3D printing. With additional insights into environmental reuse, cultural heritage preservation, and emerging manufacturing tolerances and standards, this collection offers a comprehensive view of the scientific, technical, and societal dimensions shaping the future of additive manufacturing.
3 287 kr
Kommande
This volume brings together a wide-ranging selection of papers from the 9th International Congress on 3D Printing Technologies and Digital Industry 2025 (3DPTC2025), highlighting the expanding intersections between digital transformation, intelligent systems, and sustainable industrial practices. Covering advances in VR-enabled education, teleoperated robotics, cybersecurity, blockchain-integrated manufacturing, and AI-driven analytics, the chapters present innovative methods for optimization, monitoring, simulation, and automation across industrial, biomedical, transportation, and governance domains.