Surface Acoustic Wave Filters gives the fundamental principles and device design techniques for surface acoustic wave filters. It covers the devices in widespread use today: bandpass and pulse compression filters, correlators and non-linear convolvers and resonators. The newest technologies for low bandpass filters are fully covered such as unidirectional transducers, resonators in impedance element filters, resonators in double-mode surface acoustic wave filters and transverse-coupled resonators using waveguides.

The book covers the theory of acoustic wave physics, the piezoelectric effect, electrostatics at a surface, effective permittivity, piezoelectric SAW excitation and reception, and the SAW element factor. These are the main requirements for developing quasi-static theory, which gives a basis for the non-reflective transducers in transversal bandpass filters and interdigital pulse compression filters. It is also needed for the reflective transducers used in the newer devices.

A thorough revision of a classic on surface acoustic wave filters first published in 1985 and still in print Uniquely combines easy-to-understand principles with practical design techniques for all the devices in widespread use today Complete coverage of all the latest devices which are key to mobile phones, TVs and radar systems Includes a new foreword by Sir Eric Albert Ash

Recent years have seen the emergence of a wide variety of electronic devices making use of surface acoustic waves in solids. This book focusses on the devices of greatest current interest and on the principles underlying them. An introductory survey is followed by chapters on acoustic wave fundamentals, electric excitation, transducers, multi-strip couplers and propagation effects. The interdigital transducer is emphasised since it is a key element in most devices. The remaining chapters - about half of the book - describe practical devices including delay lines, bandpass filters, chirp filters for pulse-compression radar (including reflective array compressors), convolvers and oscillators. For the main devices the text includes design principles, second-order effects, practical performance and, where appropriate, the role of the device in system applications. Some of the more mathematical details are relegated to Appendices, which include electrode interactions in transducers, sampling theory, the electrostatic element factor and the required relationships from Fourier analysis. A classified list of over 500 references is provided.The book will be of interest to engineers developing surface-wave devices, and to those using the devices in practical systems. It is also very suited for university courses or research work.

A restricted source of power supply is analysed in this book - namely the switching mode power supplies (SMPS), which utilise the Pulse Width Modulation (PWM) technique to operate. Even though restricted, such a class of power supply is vital to circuits as most of modern electronic equipment is dependant on this form of technology to feed electronic boards. Its main advantages are greater efficiency, and its minimum physical size and weight.

Interdisciplinary knowledge such as circuit theory, semiconductor devices theory and technology, magnetics theory and technology, linear and nonlinear control theory is involved in the design of an SMPS.

This volume provides designers with an in-depth overview on the latest interdisciplinary methods involved in the design of switching mode power supplies, providing the reader with a tool whereby the learning time can be reduced and information about switching mode power supplies design processes can be easily accessed. The book adopts a systemic approach, subdividing the information into functional blocks whose properties and relationships are evaluated and compared with each other. A comprehensive list of references to the literature is given thus enabling the reader to follow up on more detail.

This book introduces the reader in a systematical way to the design philosophy behind vector control systems. The mathematical motor models based on complex-space vector descriptions as well as the control structures for DC motors provide a perfect basis for explaining the principles of AC motor vector control. An in-depth review of electromagnetic transients in induction motors under various methods of frequency control is given. This is explained with the help of appropriate block schemes and new equivalent circuits. Properties of AC motors under non-sinusoidal supply are reviewed. The basic power converter topologies applied in motor control technology as well as symmetry and loss reduction problems are discussed. Some examples of controller design methods are presented step by step. An important feature of the book is that it contains many examples of systems applied in practical engineering as well as simulation and experimental results. The volume will be of interest to all those familiar with the basics of electrical machines and control systems theory. Therefore, it is recommended to students of electrical, electronics and mechanics departments. The book can also be used by those working in industry, who are interested in modern power electronics, drives and motion control, robotics as well as automation of industrial processes.

The electromechanical systems employed in different branches of industry are utilized most often as drives of working machines which must be fed with electric energy in a continuous, periodic or even discrete way. Some of these machines operate at constant speed, others require wide and varying energy control. In many designs the synchronous cooperation of several electric drives is required in addition to the desired dynamic properties. For these reasons the control of the cooperation and dynamics of electromechanical systems requires the use of computers.This book adopts an unusual approach to the subject in that it treats the electric drive system on the one hand as an element of a control system and on the other as an element of a complex automatic system. These two trends in the development of the automatic control of electric drives have resulted in a volume that provides a thorough overview on the variety of different approaches to the design of control systems.

Surface Acoustic Wave Filters gives the fundamental principles and device design techniques for surface acoustic wave filters. It covers the devices in widespread use today: bandpass and pulse compression filters, correlators and non-linear convolvers and resonators. The newest technologies for low bandpass filters are fully covered such as unidirectional transducers, resonators in impedance element filters, resonators in double-mode surface acoustic wave filters and transverse-coupled resonators using waveguides.

The book covers the theory of acoustic wave physics, the piezoelectric effect, electrostatics at a surface, effective permittivity, piezoelectric SAW excitation and reception, and the SAW element factor. These are the main requirements for developing quasi-static theory, which gives a basis for the non-reflective transducers in transversal bandpass filters and interdigital pulse compression filters. It is also needed for the reflective transducers used in the newer devices.

A thorough revision of a classic on surface acoustic wave filters first published in 1985 and still in print Uniquely combines easy-to-understand principles with practical design techniques for all the devices in widespread use today Complete coverage of all the latest devices which are key to mobile phones, TVs and radar systems Includes a new foreword by Sir Eric Albert Ash

Recent years have seen the emergence of a wide variety of electronic devices making use of surface acoustic waves in solids. This book focusses on the devices of greatest current interest and on the principles underlying them. An introductory survey is followed by chapters on acoustic wave fundamentals, electric excitation, transducers, multi-strip couplers and propagation effects. The interdigital transducer is emphasised since it is a key element in most devices. The remaining chapters - about half of the book - describe practical devices including delay lines, bandpass filters, chirp filters for pulse-compression radar (including reflective array compressors), convolvers and oscillators. For the main devices the text includes design principles, second-order effects, practical performance and, where appropriate, the role of the device in system applications. Some of the more mathematical details are relegated to Appendices, which include electrode interactions in transducers, sampling theory, the electrostatic element factor and the required relationships from Fourier analysis. A classified list of over 500 references is provided.The book will be of interest to engineers developing surface-wave devices, and to those using the devices in practical systems. It is also very suited for university courses or research work.

A restricted source of power supply is analysed in this book - namely the switching mode power supplies (SMPS), which utilise the Pulse Width Modulation (PWM) technique to operate. Even though restricted, such a class of power supply is vital to circuits as most of modern electronic equipment is dependant on this form of technology to feed electronic boards. Its main advantages are greater efficiency, and its minimum physical size and weight.

Interdisciplinary knowledge such as circuit theory, semiconductor devices theory and technology, magnetics theory and technology, linear and nonlinear control theory is involved in the design of an SMPS.

This volume provides designers with an in-depth overview on the latest interdisciplinary methods involved in the design of switching mode power supplies, providing the reader with a tool whereby the learning time can be reduced and information about switching mode power supplies design processes can be easily accessed. The book adopts a systemic approach, subdividing the information into functional blocks whose properties and relationships are evaluated and compared with each other. A comprehensive list of references to the literature is given thus enabling the reader to follow up on more detail.

This book introduces the reader in a systematical way to the design philosophy behind vector control systems. The mathematical motor models based on complex-space vector descriptions as well as the control structures for DC motors provide a perfect basis for explaining the principles of AC motor vector control. An in-depth review of electromagnetic transients in induction motors under various methods of frequency control is given. This is explained with the help of appropriate block schemes and new equivalent circuits. Properties of AC motors under non-sinusoidal supply are reviewed. The basic power converter topologies applied in motor control technology as well as symmetry and loss reduction problems are discussed. Some examples of controller design methods are presented step by step. An important feature of the book is that it contains many examples of systems applied in practical engineering as well as simulation and experimental results. The volume will be of interest to all those familiar with the basics of electrical machines and control systems theory. Therefore, it is recommended to students of electrical, electronics and mechanics departments. The book can also be used by those working in industry, who are interested in modern power electronics, drives and motion control, robotics as well as automation of industrial processes.

The electromechanical systems employed in different branches of industry are utilized most often as drives of working machines which must be fed with electric energy in a continuous, periodic or even discrete way. Some of these machines operate at constant speed, others require wide and varying energy control. In many designs the synchronous cooperation of several electric drives is required in addition to the desired dynamic properties. For these reasons the control of the cooperation and dynamics of electromechanical systems requires the use of computers.This book adopts an unusual approach to the subject in that it treats the electric drive system on the one hand as an element of a control system and on the other as an element of a complex automatic system. These two trends in the development of the automatic control of electric drives have resulted in a volume that provides a thorough overview on the variety of different approaches to the design of control systems.