Dr. Debora Puglia is a Researcher and Lecturer in the Department of Civil and Environmental Engineering, at the Università degli Studi di Perugia, Italy. Involved in the development and characterization of polymeric, composite and nanocomposite materials, her research interests are related to the study of biodegradable polymers and nanocomposites, thermosetting and thermoplastic matrix composites reinforced with vegetable fibers, nanocomposites reinforced with silica, lignocellulosic and carbon nanostructures. Dr. Puglia has co-edited 1 book, authored 20 book chapters and published more than 150 papers in peer reviewed journals. Dr. Carlo Santulli is Associate Professor of Materials Science and Technology at the Università degli Studi di Camerino, where he lectures on materials science and experimentation to industrial designers. His research interests are in composite materials and nanocomposites, natural fibres and sustainable materials, waste upcycling, bio-inspired design and biomimetics. He has around 30 years experience in this field, having worked at the Università di Roma - La Sapienza, JRC Ispra, University of Liverpool, where he got his PhD, University of Nottingham, University of Reading, and Seconda Università di Napoli. He has also been Invited Researcher and Professor at Katholieke Universiteit Leuven, Ecole des Mines de Saint Etienne, Université de Rouen, Università di Bologna, and Universiti Teknologi Malaysia. Dr. Santulli has over 200 publications to his name, including a book on biomimetics. Fabrizio Sarasini received the Laurea degree (cum laude) in Materials Engineering and the Ph.D. degree in Materials Engineering from Sapienza University of Rome in 2002 and 2007, respectively. Since June 2019 he is Associate Professor of Materials Science and Technology at the Department of Chemical Engineering Materials Environment of Sapienza University of Rome. His research interests include the use of plant fibres in biopolymers for designing biocomposites with reduced environmental impact, fibre/matrix interfacial modification and assessment, the valorization of agro-industrial wastes as fillers in thermoplastic matrices (micro- and nanoscale), 3D printing of polymers and polymer matrix composites, the low and high velocity impact response of composite materials for structural applications. He has directed or co-directed three PhD theses and has been responsible for four collaborative research programs. He has more than 160 international peer-reviewed journal papers.

• Part I - Micro and Nanolignin Extraction and Properties1. Microlignin: where to find and how to recover it2. Colour characteristics of microlignin3. Lignin depolymerization for monomers production by sustainable processes4. Nanolignin: extraction methodologies and their impact assessmentPart II - Applications of Lignin at the Microscale5. Lignin-based composites for packaging application6. Lignin as flame retardant in biopolymers7. Manufacture and application of lignin-based carbon fibers　and lignin-based carbon nanofibers8. The use of lignin as a precursor for carbon fibre-reinforced composites9. Effect of lignin in bio-based/oil-based polymer blendsPart III - Applications of Lignin at the Nanoscale10. Polymeric composites and nanocomposites containing lignin: structure and applications11. Lignin for　metal ion remediation in aqueous systems12. Lignin nanoparticles in coatings for wood preservation13. Chemical Modification and Functionalization of Lignin Nanoparticles14. Biopolymer/nanolignin films with enhanced toughness15. Lignin in Nanocomposite Hydrogels

Dr. Debora Puglia is a Researcher and Lecturer in the Department of Civil and Environmental Engineering, at the Università degli Studi di Perugia, Italy. Involved in the development and characterization of polymeric, composite and nanocomposite materials, her research interests are related to the study of biodegradable polymers and nanocomposites, thermosetting and thermoplastic matrix composites reinforced with vegetable fibers, nanocomposites reinforced with silica, lignocellulosic and carbon nanostructures. Dr. Puglia has co-edited 1 book, authored 20 book chapters and published more than 150 papers in peer reviewed journals. Dr. Carlo Santulli is Associate Professor of Materials Science and Technology at the Università degli Studi di Camerino, where he lectures on materials science and experimentation to industrial designers. His research interests are in composite materials and nanocomposites, natural fibres and sustainable materials, waste upcycling, bio-inspired design and biomimetics. He has around 30 years experience in this field, having worked at the Università di Roma - La Sapienza, JRC Ispra, University of Liverpool, where he got his PhD, University of Nottingham, University of Reading, and Seconda Università di Napoli. He has also been Invited Researcher and Professor at Katholieke Universiteit Leuven, Ecole des Mines de Saint Etienne, Université de Rouen, Università di Bologna, and Universiti Teknologi Malaysia. Dr. Santulli has over 200 publications to his name, including a book on biomimetics. Fabrizio Sarasini received the Laurea degree (cum laude) in Materials Engineering and the Ph.D. degree in Materials Engineering from Sapienza University of Rome in 2002 and 2007, respectively. Since June 2019 he is Associate Professor of Materials Science and Technology at the Department of Chemical Engineering Materials Environment of Sapienza University of Rome. His research interests include the use of plant fibres in biopolymers for designing biocomposites with reduced environmental impact, fibre/matrix interfacial modification and assessment, the valorization of agro-industrial wastes as fillers in thermoplastic matrices (micro- and nanoscale), 3D printing of polymers and polymer matrix composites, the low and high velocity impact response of composite materials for structural applications. He has directed or co-directed three PhD theses and has been responsible for four collaborative research programs. He has more than 160 international peer-reviewed journal papers.

• Part I - Micro and Nanolignin Extraction and Properties1. Microlignin: where to find and how to recover it2. Colour characteristics of microlignin3. Lignin depolymerization for monomers production by sustainable processes4. Nanolignin: extraction methodologies and their impact assessmentPart II - Applications of Lignin at the Microscale5. Lignin-based composites for packaging application6. Lignin as flame retardant in biopolymers7. Manufacture and application of lignin-based carbon fibers　and lignin-based carbon nanofibers8. The use of lignin as a precursor for carbon fibre-reinforced composites9. Effect of lignin in bio-based/oil-based polymer blendsPart III - Applications of Lignin at the Nanoscale10. Polymeric composites and nanocomposites containing lignin: structure and applications11. Lignin for　metal ion remediation in aqueous systems12. Lignin nanoparticles in coatings for wood preservation13. Chemical Modification and Functionalization of Lignin Nanoparticles14. Biopolymer/nanolignin films with enhanced toughness15. Lignin in Nanocomposite Hydrogels

Dr. Debora Puglia is a Researcher and Lecturer in the Department of Civil and Environmental Engineering, at the Università degli Studi di Perugia, Italy. Involved in the development and characterization of polymeric, composite and nanocomposite materials, her research interests are related to the study of biodegradable polymers and nanocomposites, thermosetting and thermoplastic matrix composites reinforced with vegetable fibers, nanocomposites reinforced with silica, lignocellulosic and carbon nanostructures. Dr. Puglia has co-edited 1 book, authored 20 book chapters and published more than 150 papers in peer reviewed journals. Dr. Carlo Santulli is Associate Professor of Materials Science and Technology at the Università degli Studi di Camerino, where he lectures on materials science and experimentation to industrial designers. His research interests are in composite materials and nanocomposites, natural fibres and sustainable materials, waste upcycling, bio-inspired design and biomimetics. He has around 30 years experience in this field, having worked at the Università di Roma - La Sapienza, JRC Ispra, University of Liverpool, where he got his PhD, University of Nottingham, University of Reading, and Seconda Università di Napoli. He has also been Invited Researcher and Professor at Katholieke Universiteit Leuven, Ecole des Mines de Saint Etienne, Université de Rouen, Università di Bologna, and Universiti Teknologi Malaysia. Dr. Santulli has over 200 publications to his name, including a book on biomimetics. Fabrizio Sarasini received the Laurea degree (cum laude) in Materials Engineering and the Ph.D. degree in Materials Engineering from Sapienza University of Rome in 2002 and 2007, respectively. Since June 2019 he is Associate Professor of Materials Science and Technology at the Department of Chemical Engineering Materials Environment of Sapienza University of Rome. His research interests include the use of plant fibres in biopolymers for designing biocomposites with reduced environmental impact, fibre/matrix interfacial modification and assessment, the valorization of agro-industrial wastes as fillers in thermoplastic matrices (micro- and nanoscale), 3D printing of polymers and polymer matrix composites, the low and high velocity impact response of composite materials for structural applications. He has directed or co-directed three PhD theses and has been responsible for four collaborative research programs. He has more than 160 international peer-reviewed journal papers.

• Part I - Micro and Nanolignin Extraction and Properties1. Microlignin: where to find and how to recover it2. Colour characteristics of microlignin3. Lignin depolymerization for monomers production by sustainable processes4. Nanolignin: extraction methodologies and their impact assessmentPart II - Applications of Lignin at the Microscale5. Lignin-based composites for packaging application6. Lignin as flame retardant in biopolymers7. Manufacture and application of lignin-based carbon fibers　and lignin-based carbon nanofibers8. The use of lignin as a precursor for carbon fibre-reinforced composites9. Effect of lignin in bio-based/oil-based polymer blendsPart III - Applications of Lignin at the Nanoscale10. Polymeric composites and nanocomposites containing lignin: structure and applications11. Lignin for　metal ion remediation in aqueous systems12. Lignin nanoparticles in coatings for wood preservation13. Chemical Modification and Functionalization of Lignin Nanoparticles14. Biopolymer/nanolignin films with enhanced toughness15. Lignin in Nanocomposite Hydrogels