Prof. Mohammad Reza Rahimpour is a professor in Chemical Engineering at Shiraz University, Iran. He received his Ph.D. in Chemical Engineering from Shiraz University joint with University of Sydney, Australia 1988. He started his independent career as Assistant Professor in September 1998 at Shiraz University. Prof. M.R. Rahimpour, was a Research Associate at University of California, Davis from 2012 till 2017. During his stay in University of California, he developed different reaction networks and catalytic processes such as thermal and plasma reactors for upgrading of lignin bio-oil to biofuel with collaboration of UCDAVIS. He has been a Chair of Department of Chemical Engineering at Shiraz University from 2005 till 2009 and from 2015 till 2020. Prof. M.R. Rahimpour leads a research group in fuel processing technology focused on the catalytic conversion of fossil fuels such as natural gas, and renewable fuels such as bio-oils derived from lignin to valuable energy sources. He provides young distinguished scholars with perfect educational opportunities in both experimental methods and theoretical tools in developing countries to investigate in-depth research in the various field of chemical engineering including carbon capture, chemical looping, membrane separation, storage and utilization technologies, novel technologies for natural gas conversion and improving the energy efficiency in the production and use of natural gas industries.Dr Babak Omidvar is an associate professor at the University of Tehran. He received his Ph.D. in Civil Engineering from the Faculty of Engineering, University of Tehran in 2001. He started his work as Assistant Professor in September 2002 at the graduate Faculty of Environment, University of Tehran. His research interests are resilience, risk and reliability analysis in various fields of urban areas and infrastructures. The courses he teaches at the University of Tehran include “Disaster resistant structures”, “Loss estimation studies”, “Infrastructure protection against natural disasters”, “Vulnerability assessment”, “Risk analysis and management”, “Resilience engineering”, “Environmental statistics”, “Environmental economics”, “Reliability in water resource management” and “Engineering Mathematics”. His recent research focus is on robust optimization, deep uncertainty, decision making under uncertainty, infrastructure performance assessment considering inter- and intra- dependencies, catastrophe theory, complex systems, network analysis and Multi-hazards analysis which all of them are used in natural disaster engineering and management category. In this regard, he has conducted many research studies and supervised more than 180 national and international graduate students in performing their Ph.D. and MSc theses.Nazanin Abrishami Shirazi is a PhD Candidates at University of Tehran. Her focus is on vulnerability assessment in various fields including engineering apparatus and materials, and finding proper solutions for crisis prevention and environmental side effects management. Recently he has collaborated in writing and editing various scientific works including book chapters with prestigious publishers such Elsevier and Springer.Dr. Mohammad Amin Makarem is an Adjunct Lecturer at the School of Engineering, Taylor’s University, Malaysia. He holds a PhD in Chemical Engineering from Shiraz University, Iran. His research covers gas separation and purification, green energy, nanofluids, microfluidics, and catalyst synthesis. Beyond research, he has extensive experience as an editor and contributor to academic publishing, serving as Editor or Co-editor for many books, book series, and major reference works from leading academic publishers. His editorial work spans topics such as carbon capture and storage, bioenergy, greenhouse gases, hydrotreating, oily wastewater, chemical industry crises, hydrogen and methanol energy production, homogeneous catalysis, synthesis gas, natural gas, and renewable energy systems. He recently served as series editor for Advances in Biotechnology: Methods, Applications, and Case Studies and has reviewed manuscripts for prominent international journals, helping guide researchers and industry through high-impact resources.

Select Guide Rating

• SECTION I Crisis management in oil, gas and petrochemical industries1. Introduction to decision making and disaster management systems2. Introduction to oil, gas and petrochemical industries: importance to the current world3. Application of disaster engineering in oil, gas and petrochemical industries4. Hazards in oil, gas and petrochemical industriesSECTION II Natural disasters in oil, gas and petrochemical industries5. Effect of flood on oil, gas and petrochemical industries6. Effect of hurricane and storm on oil, gas and petrochemical industriesSECTION III Manmade disasters in oil, gas and petrochemical industries7. Fire event in oil, gas and petrochemical industries8. Explosion in oil, gas and petrochemical industries9. Release of toxic substances in disasters of oil, gas and petrochemical units10. Hazardous Materials and Dust Release in Disaster of Oil, Gas, and Petrochemical Units11. Short-term and Long-term Health Problems in Exposure to ChemicalsSECTION IV Environmental issues regarded oil, gas and petrochemical industries12. Global warming and greenhouse effect resulted from oil, gas and petrochemical units13. Environmental concerns of wastes release from oil, gas and petrochemical units14. Environmental challenges of gases vent from flares and chimneys15. Environmental effects of dust release from oil, gas and petrochemical units16. Environmental challenges of extracting unconventional petroleum reserves17. Natural resources overusing in oil, gas and petrochemical industries and challenges18. Noise pollution from oil, gas and petrochemical industries19. Environmental benefits and challenges of fossil fuels replacement with clean energy

Prof. Mohammad Reza Rahimpour is a professor in Chemical Engineering at Shiraz University, Iran. He received his Ph.D. in Chemical Engineering from Shiraz University joint with University of Sydney, Australia 1988. He started his independent career as Assistant Professor in September 1998 at Shiraz University. Prof. M.R. Rahimpour, was a Research Associate at University of California, Davis from 2012 till 2017. During his stay in University of California, he developed different reaction networks and catalytic processes such as thermal and plasma reactors for upgrading of lignin bio-oil to biofuel with collaboration of UCDAVIS. He has been a Chair of Department of Chemical Engineering at Shiraz University from 2005 till 2009 and from 2015 till 2020. Prof. M.R. Rahimpour leads a research group in fuel processing technology focused on the catalytic conversion of fossil fuels such as natural gas, and renewable fuels such as bio-oils derived from lignin to valuable energy sources. He provides young distinguished scholars with perfect educational opportunities in both experimental methods and theoretical tools in developing countries to investigate in-depth research in the various field of chemical engineering including carbon capture, chemical looping, membrane separation, storage and utilization technologies, novel technologies for natural gas conversion and improving the energy efficiency in the production and use of natural gas industries.Dr Babak Omidvar is an associate professor at the University of Tehran. He received his Ph.D. in Civil Engineering from the Faculty of Engineering, University of Tehran in 2001. He started his work as Assistant Professor in September 2002 at the graduate Faculty of Environment, University of Tehran. His research interests are resilience, risk and reliability analysis in various fields of urban areas and infrastructures. The courses he teaches at the University of Tehran include “Disaster resistant structures”, “Loss estimation studies”, “Infrastructure protection against natural disasters”, “Vulnerability assessment”, “Risk analysis and management”, “Resilience engineering”, “Environmental statistics”, “Environmental economics”, “Reliability in water resource management” and “Engineering Mathematics”. His recent research focus is on robust optimization, deep uncertainty, decision making under uncertainty, infrastructure performance assessment considering inter- and intra- dependencies, catastrophe theory, complex systems, network analysis and Multi-hazards analysis which all of them are used in natural disaster engineering and management category. In this regard, he has conducted many research studies and supervised more than 180 national and international graduate students in performing their Ph.D. and MSc theses.Nazanin Abrishami Shirazi is a PhD Candidates at University of Tehran. Her focus is on vulnerability assessment in various fields including engineering apparatus and materials, and finding proper solutions for crisis prevention and environmental side effects management. Recently he has collaborated in writing and editing various scientific works including book chapters with prestigious publishers such Elsevier and Springer.Dr. Mohammad Amin Makarem is an Adjunct Lecturer at the School of Engineering, Taylor’s University, Malaysia. He holds a PhD in Chemical Engineering from Shiraz University, Iran. His research covers gas separation and purification, green energy, nanofluids, microfluidics, and catalyst synthesis. Beyond research, he has extensive experience as an editor and contributor to academic publishing, serving as Editor or Co-editor for many books, book series, and major reference works from leading academic publishers. His editorial work spans topics such as carbon capture and storage, bioenergy, greenhouse gases, hydrotreating, oily wastewater, chemical industry crises, hydrogen and methanol energy production, homogeneous catalysis, synthesis gas, natural gas, and renewable energy systems. He recently served as series editor for Advances in Biotechnology: Methods, Applications, and Case Studies and has reviewed manuscripts for prominent international journals, helping guide researchers and industry through high-impact resources.

Select Guide Rating

• SECTION I Crisis management in oil, gas and petrochemical industries1. Introduction to decision making and disaster management systems2. Introduction to oil, gas and petrochemical industries: importance to the current world3. Application of disaster engineering in oil, gas and petrochemical industries4. Hazards in oil, gas and petrochemical industriesSECTION II Natural disasters in oil, gas and petrochemical industries5. Effect of flood on oil, gas and petrochemical industries6. Effect of hurricane and storm on oil, gas and petrochemical industriesSECTION III Manmade disasters in oil, gas and petrochemical industries7. Fire event in oil, gas and petrochemical industries8. Explosion in oil, gas and petrochemical industries9. Release of toxic substances in disasters of oil, gas and petrochemical units10. Hazardous Materials and Dust Release in Disaster of Oil, Gas, and Petrochemical Units11. Short-term and Long-term Health Problems in Exposure to ChemicalsSECTION IV Environmental issues regarded oil, gas and petrochemical industries12. Global warming and greenhouse effect resulted from oil, gas and petrochemical units13. Environmental concerns of wastes release from oil, gas and petrochemical units14. Environmental challenges of gases vent from flares and chimneys15. Environmental effects of dust release from oil, gas and petrochemical units16. Environmental challenges of extracting unconventional petroleum reserves17. Natural resources overusing in oil, gas and petrochemical industries and challenges18. Noise pollution from oil, gas and petrochemical industries19. Environmental benefits and challenges of fossil fuels replacement with clean energy

Prof. Mohammad Reza Rahimpour is a professor in Chemical Engineering at Shiraz University, Iran. He received his Ph.D. in Chemical Engineering from Shiraz University joint with University of Sydney, Australia 1988. He started his independent career as Assistant Professor in September 1998 at Shiraz University. Prof. M.R. Rahimpour, was a Research Associate at University of California, Davis from 2012 till 2017. During his stay in University of California, he developed different reaction networks and catalytic processes such as thermal and plasma reactors for upgrading of lignin bio-oil to biofuel with collaboration of UCDAVIS. He has been a Chair of Department of Chemical Engineering at Shiraz University from 2005 till 2009 and from 2015 till 2020. Prof. M.R. Rahimpour leads a research group in fuel processing technology focused on the catalytic conversion of fossil fuels such as natural gas, and renewable fuels such as bio-oils derived from lignin to valuable energy sources. He provides young distinguished scholars with perfect educational opportunities in both experimental methods and theoretical tools in developing countries to investigate in-depth research in the various field of chemical engineering including carbon capture, chemical looping, membrane separation, storage and utilization technologies, novel technologies for natural gas conversion and improving the energy efficiency in the production and use of natural gas industries.Dr Babak Omidvar is an associate professor at the University of Tehran. He received his Ph.D. in Civil Engineering from the Faculty of Engineering, University of Tehran in 2001. He started his work as Assistant Professor in September 2002 at the graduate Faculty of Environment, University of Tehran. His research interests are resilience, risk and reliability analysis in various fields of urban areas and infrastructures. The courses he teaches at the University of Tehran include “Disaster resistant structures”, “Loss estimation studies”, “Infrastructure protection against natural disasters”, “Vulnerability assessment”, “Risk analysis and management”, “Resilience engineering”, “Environmental statistics”, “Environmental economics”, “Reliability in water resource management” and “Engineering Mathematics”. His recent research focus is on robust optimization, deep uncertainty, decision making under uncertainty, infrastructure performance assessment considering inter- and intra- dependencies, catastrophe theory, complex systems, network analysis and Multi-hazards analysis which all of them are used in natural disaster engineering and management category. In this regard, he has conducted many research studies and supervised more than 180 national and international graduate students in performing their Ph.D. and MSc theses.Nazanin Abrishami Shirazi is a PhD Candidates at University of Tehran. Her focus is on vulnerability assessment in various fields including engineering apparatus and materials, and finding proper solutions for crisis prevention and environmental side effects management. Recently he has collaborated in writing and editing various scientific works including book chapters with prestigious publishers such Elsevier and Springer.Dr. Mohammad Amin Makarem is an Adjunct Lecturer at the School of Engineering, Taylor’s University, Malaysia. He holds a PhD in Chemical Engineering from Shiraz University, Iran. His research covers gas separation and purification, green energy, nanofluids, microfluidics, and catalyst synthesis. Beyond research, he has extensive experience as an editor and contributor to academic publishing, serving as Editor or Co-editor for many books, book series, and major reference works from leading academic publishers. His editorial work spans topics such as carbon capture and storage, bioenergy, greenhouse gases, hydrotreating, oily wastewater, chemical industry crises, hydrogen and methanol energy production, homogeneous catalysis, synthesis gas, natural gas, and renewable energy systems. He recently served as series editor for Advances in Biotechnology: Methods, Applications, and Case Studies and has reviewed manuscripts for prominent international journals, helping guide researchers and industry through high-impact resources.

Select Guide Rating

• SECTION I Crisis management in oil, gas and petrochemical industries1. Introduction to decision making and disaster management systems2. Introduction to oil, gas and petrochemical industries: importance to the current world3. Application of disaster engineering in oil, gas and petrochemical industries4. Hazards in oil, gas and petrochemical industriesSECTION II Natural disasters in oil, gas and petrochemical industries5. Effect of flood on oil, gas and petrochemical industries6. Effect of hurricane and storm on oil, gas and petrochemical industriesSECTION III Manmade disasters in oil, gas and petrochemical industries7. Fire event in oil, gas and petrochemical industries8. Explosion in oil, gas and petrochemical industries9. Release of toxic substances in disasters of oil, gas and petrochemical units10. Hazardous Materials and Dust Release in Disaster of Oil, Gas, and Petrochemical Units11. Short-term and Long-term Health Problems in Exposure to ChemicalsSECTION IV Environmental issues regarded oil, gas and petrochemical industries12. Global warming and greenhouse effect resulted from oil, gas and petrochemical units13. Environmental concerns of wastes release from oil, gas and petrochemical units14. Environmental challenges of gases vent from flares and chimneys15. Environmental effects of dust release from oil, gas and petrochemical units16. Environmental challenges of extracting unconventional petroleum reserves17. Natural resources overusing in oil, gas and petrochemical industries and challenges18. Noise pollution from oil, gas and petrochemical industries19. Environmental benefits and challenges of fossil fuels replacement with clean energy