David E. Laughlin is the ALCOA Professor of Physical Metallurgy Emeritus, in the Department of Materials Science and Engineering atCarnegie Mellon University, Pittsburgh, PA. He obtained his BS in Metallurgical Engineering from Drexel University in 1969 and his PhDin Metallurgy and Materials Science from MIT in 1973. He has taught at CMU since 1974. He was the Principal Editor of Metallurgical andMaterials Transactions and has coedited eight books. His research has centered on the structure of materials as observed by electron microscopy, phase transformations, and magnetic materials. He has publishedmore than 500 peer-reviewed research papers and is a coinventor on 11 US patents. Laughlin is a Fellow of TMS and ASM International. Kazuhiro Hono is President of the National Institute for Materials Science (NIMS) in Tsukuba, Japan. He joined NIMS in 1995 and hasserved as a NIMS Fellow, Director of the Research Center for Magnetic and Spintronic Materials, and Executive Vice President of NIMS. He obtained his BS from Tohoku University in 1982 and his PhD in Materials Science and Engineering from the Pennsylvania State University in 1988. His research has centered on the microstructure-property relationships of metallic materials, particularly magnetic materials. He served as Principal Editor of Scripta Materialia and Acta Materialia from 2000 to 2022. Hono is a Fellow of TMS and of the Magnetics Society of Japan.

"How does one review The Bible? Editors R.W. Cahn and P. Haasen have succeeded in producing the Physical Metallurgy equivalent. This is the third revision of the famous work, and it represents a major extension to the previous edition with at least 50% more material packed into three very substantial volumes...." --Contemporary Physics"Considering the exactness and extent of the contents, this work represents an advanced textbook, and, at the same time, a suitable handbook for University." --Metallic Materials

• Volume I1. Crystal Structures of Metallic Elements and Compounds, by Walter Steurer2. Electron Theory of Complex Metallic Alloys, by U. Mizutani, M. Inukal, H. Sato and E. S. Zijlstra.3. Thermodynamics and Phase Diagrams, by Arthur D. Pelton4. Metallic Glasses, by A. L. Greer5. Diffusion, by Guido Schmitz6. Defects in Metals, by H. Numakura7. Solidification, by William J. Boettinger and Dilip K. Banerjee8. Diffusional Phase Transformations in the Solid State, by William A. Soffa and David E. LaughlinVolume II9. Displacive Phase Transformations, by H. K. D. H. Bhadeshia10. Microstructure of Metals and Alloys, by G. Spanos and W. T. Reynolds, Jr.11. Orientation Mapping, by Anthony D. Rollett and Katayun Barmak12. Transmission Electron Microscopy For Physical Metallurgists, by Hamish L Fraser, David W McComb and Robert E A Williams13. X-ray and Neutron Scattering, by Gernot Kostorz14. Structure, Composition and Energy of Solid-Solid Interfaces, by James M. Howe15. Atom Probe Field Ion Microscopy, by Kazuhiro. Hono and Sudarsanam, Suresh16. Dislocations, by David Rodney and Joël Bonneville17. Plastic Deformation of Metals and Alloys, by Niels Hansen and Claire Barlow18. Fatigue Of Metals, by Pedro Peralta and Campbell Laird19. Magnetic Properties of Metals and Alloys, by Michael E. McHenry and David E. LaughlinVolume III20. Physical Metallurgy Of Light Alloys, by Jian-Feng Nie21. Physical Metallurgy of Steels, by H. K. D. H. Bhadeshia22. Physical Metallurgy Of The Nickel-Based Superalloys, by R.C. Reed and C.M.F. Rae23. Recovery and Recrystallization: Phenomena, Physics, Models, Simulation, by Dierk Raabe24. Porous Metals, by Russell Goodall and Andreas Mortensen25. Hydrogen in Metals, by R. Kirchheim, A. Pundt26. Physical Metallurgy of Nanocrystalline Metals, by Gerhard Wilde27. Computational Metallurgy, Long-Qing Chen and Yijia Gu

David E. Laughlin is the ALCOA Professor of Physical Metallurgy Emeritus, in the Department of Materials Science and Engineering atCarnegie Mellon University, Pittsburgh, PA. He obtained his BS in Metallurgical Engineering from Drexel University in 1969 and his PhDin Metallurgy and Materials Science from MIT in 1973. He has taught at CMU since 1974. He was the Principal Editor of Metallurgical andMaterials Transactions and has coedited eight books. His research has centered on the structure of materials as observed by electron microscopy, phase transformations, and magnetic materials. He has publishedmore than 500 peer-reviewed research papers and is a coinventor on 11 US patents. Laughlin is a Fellow of TMS and ASM International. Kazuhiro Hono is President of the National Institute for Materials Science (NIMS) in Tsukuba, Japan. He joined NIMS in 1995 and hasserved as a NIMS Fellow, Director of the Research Center for Magnetic and Spintronic Materials, and Executive Vice President of NIMS. He obtained his BS from Tohoku University in 1982 and his PhD in Materials Science and Engineering from the Pennsylvania State University in 1988. His research has centered on the microstructure-property relationships of metallic materials, particularly magnetic materials. He served as Principal Editor of Scripta Materialia and Acta Materialia from 2000 to 2022. Hono is a Fellow of TMS and of the Magnetics Society of Japan.

"How does one review The Bible? Editors R.W. Cahn and P. Haasen have succeeded in producing the Physical Metallurgy equivalent. This is the third revision of the famous work, and it represents a major extension to the previous edition with at least 50% more material packed into three very substantial volumes...." --Contemporary Physics"Considering the exactness and extent of the contents, this work represents an advanced textbook, and, at the same time, a suitable handbook for University." --Metallic Materials

• Volume I1. Crystal Structures of Metallic Elements and Compounds, by Walter Steurer2. Electron Theory of Complex Metallic Alloys, by U. Mizutani, M. Inukal, H. Sato and E. S. Zijlstra.3. Thermodynamics and Phase Diagrams, by Arthur D. Pelton4. Metallic Glasses, by A. L. Greer5. Diffusion, by Guido Schmitz6. Defects in Metals, by H. Numakura7. Solidification, by William J. Boettinger and Dilip K. Banerjee8. Diffusional Phase Transformations in the Solid State, by William A. Soffa and David E. LaughlinVolume II9. Displacive Phase Transformations, by H. K. D. H. Bhadeshia10. Microstructure of Metals and Alloys, by G. Spanos and W. T. Reynolds, Jr.11. Orientation Mapping, by Anthony D. Rollett and Katayun Barmak12. Transmission Electron Microscopy For Physical Metallurgists, by Hamish L Fraser, David W McComb and Robert E A Williams13. X-ray and Neutron Scattering, by Gernot Kostorz14. Structure, Composition and Energy of Solid-Solid Interfaces, by James M. Howe15. Atom Probe Field Ion Microscopy, by Kazuhiro. Hono and Sudarsanam, Suresh16. Dislocations, by David Rodney and Joël Bonneville17. Plastic Deformation of Metals and Alloys, by Niels Hansen and Claire Barlow18. Fatigue Of Metals, by Pedro Peralta and Campbell Laird19. Magnetic Properties of Metals and Alloys, by Michael E. McHenry and David E. LaughlinVolume III20. Physical Metallurgy Of Light Alloys, by Jian-Feng Nie21. Physical Metallurgy of Steels, by H. K. D. H. Bhadeshia22. Physical Metallurgy Of The Nickel-Based Superalloys, by R.C. Reed and C.M.F. Rae23. Recovery and Recrystallization: Phenomena, Physics, Models, Simulation, by Dierk Raabe24. Porous Metals, by Russell Goodall and Andreas Mortensen25. Hydrogen in Metals, by R. Kirchheim, A. Pundt26. Physical Metallurgy of Nanocrystalline Metals, by Gerhard Wilde27. Computational Metallurgy, Long-Qing Chen and Yijia Gu

David E. Laughlin is the ALCOA Professor of Physical Metallurgy Emeritus, in the Department of Materials Science and Engineering atCarnegie Mellon University, Pittsburgh, PA. He obtained his BS in Metallurgical Engineering from Drexel University in 1969 and his PhDin Metallurgy and Materials Science from MIT in 1973. He has taught at CMU since 1974. He was the Principal Editor of Metallurgical andMaterials Transactions and has coedited eight books. His research has centered on the structure of materials as observed by electron microscopy, phase transformations, and magnetic materials. He has publishedmore than 500 peer-reviewed research papers and is a coinventor on 11 US patents. Laughlin is a Fellow of TMS and ASM International. Kazuhiro Hono is President of the National Institute for Materials Science (NIMS) in Tsukuba, Japan. He joined NIMS in 1995 and hasserved as a NIMS Fellow, Director of the Research Center for Magnetic and Spintronic Materials, and Executive Vice President of NIMS. He obtained his BS from Tohoku University in 1982 and his PhD in Materials Science and Engineering from the Pennsylvania State University in 1988. His research has centered on the microstructure-property relationships of metallic materials, particularly magnetic materials. He served as Principal Editor of Scripta Materialia and Acta Materialia from 2000 to 2022. Hono is a Fellow of TMS and of the Magnetics Society of Japan.

"How does one review The Bible? Editors R.W. Cahn and P. Haasen have succeeded in producing the Physical Metallurgy equivalent. This is the third revision of the famous work, and it represents a major extension to the previous edition with at least 50% more material packed into three very substantial volumes...." --Contemporary Physics"Considering the exactness and extent of the contents, this work represents an advanced textbook, and, at the same time, a suitable handbook for University." --Metallic Materials

• Volume I1. Crystal Structures of Metallic Elements and Compounds, by Walter Steurer2. Electron Theory of Complex Metallic Alloys, by U. Mizutani, M. Inukal, H. Sato and E. S. Zijlstra.3. Thermodynamics and Phase Diagrams, by Arthur D. Pelton4. Metallic Glasses, by A. L. Greer5. Diffusion, by Guido Schmitz6. Defects in Metals, by H. Numakura7. Solidification, by William J. Boettinger and Dilip K. Banerjee8. Diffusional Phase Transformations in the Solid State, by William A. Soffa and David E. LaughlinVolume II9. Displacive Phase Transformations, by H. K. D. H. Bhadeshia10. Microstructure of Metals and Alloys, by G. Spanos and W. T. Reynolds, Jr.11. Orientation Mapping, by Anthony D. Rollett and Katayun Barmak12. Transmission Electron Microscopy For Physical Metallurgists, by Hamish L Fraser, David W McComb and Robert E A Williams13. X-ray and Neutron Scattering, by Gernot Kostorz14. Structure, Composition and Energy of Solid-Solid Interfaces, by James M. Howe15. Atom Probe Field Ion Microscopy, by Kazuhiro. Hono and Sudarsanam, Suresh16. Dislocations, by David Rodney and Joël Bonneville17. Plastic Deformation of Metals and Alloys, by Niels Hansen and Claire Barlow18. Fatigue Of Metals, by Pedro Peralta and Campbell Laird19. Magnetic Properties of Metals and Alloys, by Michael E. McHenry and David E. LaughlinVolume III20. Physical Metallurgy Of Light Alloys, by Jian-Feng Nie21. Physical Metallurgy of Steels, by H. K. D. H. Bhadeshia22. Physical Metallurgy Of The Nickel-Based Superalloys, by R.C. Reed and C.M.F. Rae23. Recovery and Recrystallization: Phenomena, Physics, Models, Simulation, by Dierk Raabe24. Porous Metals, by Russell Goodall and Andreas Mortensen25. Hydrogen in Metals, by R. Kirchheim, A. Pundt26. Physical Metallurgy of Nanocrystalline Metals, by Gerhard Wilde27. Computational Metallurgy, Long-Qing Chen and Yijia Gu