Advances in Solid Oxide Fuel Cells II, Volume 27, Issue 4

Häftad, Engelska, 2006

Del 40 i serien Ceramic Engineering and Science Proceedings

1 497 kr

Beställningsvara. Skickas inom 5-8 vardagar. Fri frakt över 249 kr.

Beskrivning

Due to its many potential benefits, including high electrical efficiency and low environmental emissions, solid oxide fuel cell (SOFC) technology is the subject of extensive research and development efforts by national laboratories, universities, and private industries. In these proceedings, international scientists and engineers present recent technical progress on materials-related aspects of fuel cells including SOFC component materials, materials processing, and cell/stack design, performance, and stability. Emerging trends in electrochemical materials, electrodics, interface engineering, long-term chemical interactions, and more are included. This book is compiled of papers presented at the Proceedings of the 30th International Conference on Advanced Ceramics and Composites, January 22-27, 2006, Cocoa Beach, Florida. Organized and sponsored by The American Ceramic Society and The American Ceramic Society's Engineering Ceramics Division in conjunction with the Nuclear and Environmental Technology Division.

Produktinformation

Utgivningsdatum:2006-12-15
Mått:158 x 235 x 21 mm
Vikt:611 g
Format:Häftad
Språk:Engelska
Serie:Ceramic Engineering and Science Proceedings
Antal sidor:452
Förlag:John Wiley & Sons Inc
ISBN:9780470080542

Utforska kategorier

Mer om författaren

Andrew A. Wereszczak received his Ph.D. in Materials Science & Engineering from the University of Delaware in 1992, and while his research is varied, the study and interpretation of the relationship between mechanical properties and microstructure (of monolithic ceramics, structural materials, and electronic materials) are common denominators. Micromechanical characterization of structural and armor ceramics using instrumented static and dynamic indentation (e.g., Hertzian) with acoustic emission analysis, and adapting those measured performances and damage mechanism analyses to strength, rolling contact fatigue, wear, machining, and ballistic performances is a primary objective. Additionally, ceramic strength and fatigue testing, ceramic fractographical and flaw population analyses, Weibull analysis strength-size-scaling, and probabilistic life prediction and design of structural ceramic components constitutive another primary research objective. In support of all these efforts, both conventional and microstructural-level finite element stress analyses and microstructure characterization are performed. He is the author or co-author of over 100 technical publications and has given over 80 presentations, and is the co-developer of µ-FEA software.

Innehållsförteckning

Preface xiIntroduction xiiiOverview and Current StatusDevelopment of Two Types of Tubular SOFCs at TOT0 3Akira Kawakami, Satoshi Matsuoka, Naoki Watanabe, Takeshi Saito, Akira Ueno, Tatsumi Ishihara, Natsuko Sakai, and Harumi YokokawaCell and Stack DevelopmentDevelopment of Solid Oxide Fuel Cell Stack Using Lanthanum Gallate-Based Oxide as an Electrolyte 17T. Yamada, N. Chitose, H. Etou, M. Yamada, K. Hosoi, N. Komada, T. Inagaki, F. Nishiwaki, K. Hashino, H. Yoshida, M. Kawano, S. Yamasaki, and T. lshiharaAnode Supported LSCM-LSGM-LSM Solid Oxide Fuel Cell 27Alidad Mohammadi, Nigel M. Sammes, Jakub Pusz, and Alevtina L. SmirnovaCharacterization/TestingInfluence of Anode Thickness on the Electrochemical Performance of Single Chamber Solid Oxide Fuel Cells 37B. E. Buergler, Y. Santschi, M. Felberbaum, and L. J. GaucklerInvestigation of Performance Degradation of SOFC Using Chromium-Containing Alloy Interconnects 47D. R. Beeaff, A. Dinesen, and P. V. HendriksenDegradation Mechanism of Metal Supported Atmospheric Plasma Sprayed Solid Oxide Fuel Cells 55D. Hathiramani, R. VaOen, J. Mertens, D. Sebold, V. A. C. Haanappel, and D. StoverEffect of Transition Metal Ions on the Conductivity and Stability of Stabilized Zirconia 67D. Lybye and M. MogensenThermophysical Properties of YSZ and Ni-YSZ as a Function of Temperature and Porosity 79M. Radovic, E. Lara-Curzio, R. M. Trejo, H. Wang, and W. D. PorterPhysical Properties in the Bi2O3-Fe2O3S ystem Containing Y2O3 and CaO Dopants 87Hsin-Chai Huang, Yu-Chen Chang, and Tzer-Shin SheuElectrical Properties of Ce0.8Gd0.2O1.9 Ceramics Prepared by an Aqueous Process 95Toshiaki Yamaguchi, Yasufumi Suzuki, Wataru Sakamoto, and Shin-ichi HiranoStructural Study and Conductivity of BaZr0.90Ga0.10O2.95 105lstaq Ahmed, Elisabet Ahlberg, Sten Eriksson, Christoper Knee, Maths Karlsson, Aleksandar Matic, and Lars BorjessonHydrogen Flux in Terbium Doped Strontium Cerate Membrane 119Mohamed M. Elbaccouch and Ali T-RaissiA Mechanical-Electrochemical Theory of Defects in Ionic Solids 125Narasimhan Swaminathan and Jianmin QuElectrodesNanostructured Ceramic Suspensions for Electrodes and the Brazilian SOFC Network "Rede PaCOS" 139R. C. Cordeiro, G. S. Trindade, R. N. S. H. MagalhSies, G. C. Silva, P. R. Villalobos, M. C. R. S. Varela, and P. E. V. de MirandaModeling of MlEC Cathodes: The Effect of Sheet Resistance 153David S. Mebane, Erik Koep, and Meilin LiuCathode Thermal Delamination Study for a Planar Solid Oxide Fuel Cell with Functional Graded Properties: Experimental Investigation and Numerical Results 161Gang Ju, Kenneth Reifsnider, and Jeong-Ho KimElectrochemical Characteristics of Ni/Gd-Doped Ceria and Ni/Sm-Doped Ceria Anodes for SOFC Using Dry Methane Fuel 175Caroline Levy, Shinichi Hasegawa, Shiko Nakamura, Manabu Ihara, and Keiji YamaharaControl of Microstructure of NiO-SDC Composite Particles for Development of High Performance SOFC Anodes 183Koichi Kawahara, Seiichi Suda, Seiji Takahashi, Mitsunobu Kawano, Hiroyuki Yoshida, and Toru lnagakiElectrochemical Characterization and Identification of Reaction Sites in Oxide Anodes 193T. Nakamura, K. Yashiro, A. Kairnai, T. Otake, K. Sato, G.J . Park, T. Kawada, and J. MizusakiInterconnects and Protective CoatingsCorrosion Performance of Ferritic Steel for SOFC Interconnect Applications 201M. Ziomek-Moroz, G. R. Holcomb, B. S. Covino, Jr., S. J. Bullard, P. D. Jablonski, and D. E. AlrnanHigh Temperature Corrosion Behavior of Oxidation Resistant Alloys Under SOFC Interconnect Dual Exposures 211Zhenguo Yang, Greg W. Coffey, Joseph P. Rice, Prabhakar Singh, Jeffry W. Stevenson, and Guan-Guang XiaElectro-Deposited Protective Coatings for Planar Solid Oxide Fuel Cell Interconnects 223Christopher Johnson, Chad Schaeffer, Heidi Barron, and Randall GemmenProperties of (Mn,Co)3O4 Spinel Protection Layers for SOFC Interconnects 231Zhenguo Yang, Xiao-Hong Li, Gary D. Maupin, Prabhakar Singh, Steve P. Sirnner, Jeffry W. Stevenson, Guan-Guang Xia, and Xiaodong ZhouFuel Cell Interconnecting Coatings Produced by Different Thermal Spray Techniques 241E. Garcia and T. W. CoyleSurface Modification of Alloys for Improved Oxidation Resistance in SOFC Applications 253David E. Alman, Paul D. Jablonski, and Steven C. KungSealsComposite Seal Development and Evaluation 265Matthew M. Seabaugh, Kathy Sabolsky, Gene B. Arkenberg, and Jerry L. JayjohnInvestigation of SOFC-Gaskets Containing Compressive Mica Layers Under Dual Atmosphere Conditions 273F. Wiener, M. Brarn, H.-P. Buchkrerner, and D. SeboldPerformance of Self-Healing Seals for Solid Oxide Fuel Cells (SOFC) 287Raj N. Singh and Shailendra S. PariharProperties of Glass-Ceramic for Solid Oxide Fuel Cells 297S. T. Reis, R. K. Brow, T. Zhang, and P. JasinskiMechanical Behavior of Solid Oxide Fuel Cell (SOFC) Seal Glass-Boron Nitride Nanotubes Composite 305Sung R. Choi, Narottam P. Bansal, Janet B. Hurst, and Anita GargMechanical Behaviour of Glassy Composite Seals for IT-SOFC Application 315K. A. Nielsen, M. Solvang, S. B. L. Nielsen, and D. BeeaffMechanical Property Characterizations and Performance Modeling of SOFC Seals 325Brian J. Koeppel, John S. Vetrano, Ba Nghiep Nguyen, Xin Sun, and Moe A. KhaleelMechanical PropertiesFracture Test of Thin Sheet Electrolytes 339Jurgen Malzbender, Rolf W. Steinbrech, and Lorenz SingheiserFailure Modes of Thin Supported Membranes 347P. V. Hendriksen, J. R. Hprgsberg, A. M. Kjeldsen, B. F. Sorensena, and H. G. PedersenComparison of Mechanical Properties of NiO/YSZ by Different Methods 361Dustin R. Beeaff, S. Ramousse, and Peter V. HendriksenFracture Toughness and Slow Crack Growth Behavior of Ni-YSZ and YSZ as a Function of Porosity and Temperature 373M. Radovic, E. Lara-Curzio, and G. NelsonEffect of Thermal Cycling and Thermal Aging on the Mechanical Properties of, and Residual Stresses in, Ni-YSZ/YSZ Bi-Layers 383E. Lara-Curzio, M. Radovic, R. M. Trejo, C. Cofer, T. R. Watkins, and K. L. MoreThree-Dimensional Numerical Simulation Tools for Fracture Analysis in Planar Solid Oxide Fuel Cells (SOFCs) 393Janine Johnson and Jianmin QuModelingElectrochemistry and On-Cell Reformation Modeling for Solid Oxide Fuel Cell Stacks 409K. P. Recknagle, D. T. Jarboe, K. I. Johnson, V. Korolev, M. A. Khaleel, and P. SinghModeling of HeaVMass Transport and Electrochemistry of a Solid Oxide Fuel Cell 419Yan Ji, J. N. Chung, and Kun YuanAuthor Index 435