Advanced Ceramic Coatings and Interfaces II, Volume 28, Issue 3

Jonathan Salem is a Materials Research Engineer atNASAGlennResearchCenter inCleveland,OH. He received a BS in Materials Science and Metallurgical Engineering from theUniversity ofCincinnati in 1983 and worked at NASA-Lewis as a Materials Research Engineer for two years performing heat treatment and fracture studies of titanium and steel alloys. In 1987 he received an MS in Materials Science from theUniversity ofWashington,Seattle and served at NASA–Glenn as Project Leader of the Toughened Ceramics Life Prediction Program on development of mechanical testing methods and standards for ceramic materials. In 1999 he received a PhD in Mechanical engineering from theUniversity of Washington. Presently, he is involved with the room and elevated temperature mechanical testing and reliability modeling of ceramic, intermetallic and composite materials for the Life Prediction, where briefly served as a temporary Deputy Branch Chief. Prior to working at NASA, he worked in Quality Assurance at Powell Valve, Cincinnati, OH, and at Forest City Foundries, Cleveland, OH. He authored or co-authored over 60 archival publications, over 70 proceedings publications, and four national and international standards on mechanics of ceramics. He is a fellow of American Society for Testing and Materials and received a NASA Manned Spaced Flight Awareness Award for work on ceramic bearings for the Space Shuttle Main Engine Turbo-pump. In 2004, he received the Richard M. Fulrath Award from the American Ceramic Society for development of technical standards for design of structural ceramics.Dongming Zhu is a senior Materials Research Engineer at Army Research Laboratory, Vehicle Technology Directorate, and Durability and Protective Coatings Branch of Structures and Materials Division, at NASA Glenn Research Center. His expertise covers the areas of thermal conductivity, lattice defects and transport, high temperature oxidation, high-heat-flux testing, and mechanical behavior of ceramic coating systems, with an emphasis on experimental investigation and analytical modeling of processing, thermal fatigue and fracture behavior of advanced protective coatings and composites. His major contributions include the development of low conductivity thermal barrier coatings for turbine airfoil applications, 1650°C thermal/environmental barrier coatings for SiC/SiC ceramic matrix composite (CMC) turbine vane and combustor liner applications. He has authored more than 100 archival publications and three patents. He is a member of the American Ceramic Society and ASM, International, has been a lead organizer for several International Symposia. He is currently the Chair-elect of the Engineering Ceramic Division of the American Ceramic Society, and an associate editor of the International Journal of Applied Ceramic Technology. He has received several awards from NASA and professional societies. He received his Ph.D. degree in Chemical Engineering and Materials Science from the University of Minnesota in 1996.

• Preface ixIntroduction xiTHERMAL AND MECHANICAL PROPERTIES OF THERMAL BARRIER COATINGSThermal and Mechanical Properties of Zirconia Coatings Produced by Electrophoretic Deposition 3Bernd Baufeld, Omer van der Biest, and Hans-Joachim Ratzer-ScheibeElastic and Inelastic Deformation Properties of Free Standing Ceramic EB-PVD Coatings 11Marion Bartsch, Uwe Fuchs, and Jianmin XuThermal and Mechanical Properties of Zirconia/Monazite-Type LaP04 Nanocomposites Fabricated by PECS 19Seung-Ho Kim, Tohru Sekino, Takafumi Kusunose, and Ari T. HirvonenCorrosion Behavior of New Thermal Barrier Coatings 27R. Vassen, D. Sebold, and D. StoverMICROSTRUCTURAL CHARACTERIZATION OF THERMAL BARRIER COATINGSMonitoring the Phase Evolution of Yttria Stabilized Zirconia in Thermal Barrier Coatings Using the Rietveld Method 41G. Witz, V. Shklover, W. Steurer, S. Bachegowda, and H.-P. BossmannThermal Imaging Characterization of Thermal Barrier Coatings 53J.G. SunExamination on Microstructural Change of a Bond Coat in a Thermal Barrier Coating for Temperature Estimation and Aluminum-Content Prediction 61Mitstutoshi Okada, Tohru Hisamatsu, and Takayuki KitamuraQuantative Microstructural Analysis of Thermal Barrier Coatings Produced by Electron Beam Physical Vapor Deposition 71Matthew Kelly, Jogender Singh, Judith Todd, Steven Copley, and Douglas WolfeInvestigation of Damage Prediction of Thermal Barrier Coating 81Y. OhtakeENGINEERING OF THERMAL PROPERTIES OF THERMAL BARRIER COATINGSEffect of an Opaque Reflecting Layer on the Thermal Behavior of a Thermal Barrier Coating 87Charles M. SpucklerOptimizing of the Reflectivity of Air Plasma Sprayed Ceramic Thermal Barrier Coatings 99A. Stuke, R. Carius, J.-L. Marques, G. Mauer, M. Schulte, D. Sebold, R. Vaßen, and D. StoverThermal Conductivity of Nanoporous YSZ Thermal Barrier Coatings Fabricated by EB-PVD 115Byung-Koog Jang and Hideaki MatsubaraCOATINGS TO RESIST WEAR, EROSION, AND TRIBOLOGICAL LOADINGSReduction of Wear by a TiBN Multilayer Coating 127B.-A. Behrens, A. Küper, M. Bistron, Fr.-W. Bach, K. Möhwald, and T.A. DeisserCharacteristics of TiN/CrN Multilayer Coatings with TiCrN and CrTiN Interlayer 135Xingbo Liu, Chengming Li, Jing Xu, Weizhong Tang, and Fanxiu LvDevelopment of a Duplex Coating Procedure (HVOF and PVD) on TI-6AL-4V Substrate for Automotive Applications 145E. Bemporad, M. Sebastiani, F. Carassiti, F. Casadei, and R. ValleNovel Coatings of Cemented Carbides by an Improved HVOF Spraying Process 159Makoto Watanabe, Pornthep Chivavibul, Jin Kawakita, and Seiji KurodaFracture Mechanics Analysis of Coatings Under Contact Load 167Yumei Bao, Guozhong Chai, and Weina HaoCOATINGS FOR SPACE APPLICATIONSHeat Treatment of Plasma-Sprayed Alumina: Evolution of Microstructure and Optical Properties 177Keith S. Caruso, David G. Drewry, Don E. King, and Justin S. JonesPorous Ceramic Foam Catalysts for N20-Based Satellite Microthrusters 193F. Ahmed, L. Courtney, J.R. Wallbank, and P.A. SermonMULTIFUNCTIONAL COATINGS, NANOSTRUCTURED COATINGS, AND INTERFACES PHENOMENADevelopment of Multi-Layered EBC for Silicon Nitride Ceramics 205Shunkichi Ueno, Tatsuki Ohji, and Hua -Tay LinReactive Bonding of Sapphire Single Crystal to Tungsten-Copper Metal Composite Using Directed Vapor Deposition Process 209Y. T. Peng, D. D. Hass, and Y.V. MurtyProtective Coating on Metals Using Chromium-Free Organic-Inorganic Silica Hybrid Aqueous Solution 219Satomi Ono and Hiroyasu TsugeAn Energy Model of Segmentation Cracking of SiOx Thin Film on a Polymer Substrate 231Marcin Bialas and Zenon MrozEffect of Withdrawal Speed on Thickness and Microstructure of 8MOL%Yttria Stabilized Zirconia Coatings on Inorganic Substrates 243Srinivasa Rao Boddapati and Rajendra K. BordiaAuthor Index 253