Jonathan Salem is a Materials Research Engineer at NASA Glenn Research Center in Cleveland, OH. He received a PhD in Mechanical engineering from the University of Washington and has authored or co-authored over 60 archival publications, over 70 proceedings publications, and four national and international standards on mechanics of ceramics. He is a fellow of American Society for Testing and Materials and received a NASA Manned Spaced Flight Awareness Award for work on ceramic bearings for the Space Shuttle Main Engine Turbo-pump. In 2004, he received the Richard M. Fulrath Award from the American Ceramic Society for development of technical standards for design of structural ceramics.

• Preface. Introduction.CORROSION.Corrosion Resistance of Ceramics in Vaporous and Boiling Sulfuric Acid (C.A. Lewinsohn, H. Anderson, M. Wilson, T. Lillo, and A. Johnson).Thermocouple Interactions during Testing of Melt Infiltrated Ceramic Matrix Composites (G. Ojard, G. Morscher, Y. Gowayed, U. Santhosh, J. Ahmaad, R. Miller, and R. John).Oxidation Resistance of Pressureless-Sintered Sic-AIN-Re2O3 Composites Obtained without Powder Bed (G. Magnani, F. Antolini, L. Beaulardi, F. Burgio, and C. Mingazzini).Characterization of the Re-oxidation Behavior of Anode-Supported SOFCs (Manuel Ettler, Norbert H. Menzler, Hans Peter Buchkremer, Detlev Stover).Healing Behavior of Machining Cracks in Oxide-Based Composite Containing Sic Particles (Toshio Osada, Wataru Nakao, Koji Takahashi, and Kotoji Ando).Effects of Oxidation on the Mechanical Properties of Pressureless-Sintered SiC-AIN-Y2O3 Composites Obtained without Powder Bed (G. Magnani, L. Beaulardi, E. Trentini).Fiber Push Out Testing Before and After Exposure: Results for an MI SiC/SiC Composite (G. Ojard, L. Riester, R. Trejo, R. Annis, Y. Gowayed, G. Morscher, K. An, R. Miller, and R. John).New Ceramics Surface Reinforcing Treatment using a Combination of Crack-Healing and Electron Beam Irradiation (Wataru Nakao, Youhei Chiba, Kotoji Ando, Keisuke Iwata, and Yoshitake Nishi).Effect of Si3N4 on the instability of Li2O-Containing Celsian in the BAS/Si3N4 Composites (Kuo-Tong Lee).FATIGUE, WEAR, AND CREEP.Rolling Contact Fatigue Properties and Fracture Resistance for Silicon Nitride Ceramics with Various Microstructures (Hiroyuki Miyazaki, Wataru Kanematsu, Hideki Hyuga, Yu-ichi Yoshizawa, Kiyoshi Hirao and Tatsuki Ohji).Fretting Fatigue of Engineering Ceramics (Thomas Schalk, Karl-Heinz Lang, and Detlef Lohe).Investigation into Cyclic Frequency Effects on Fatigue Behavior of an Oxide/Oxide Composite (Shankar Mall and Joon-Mo Ahn).Friction and Wear Behavior of AlBC Composites (Ellen Dubensky, Robert Newman, Aleksander J. Pyzik, and Amy Wetzel).Creep of Silicon Nitride Observed In Situ with Neutron Diffraction (G.A. Swift).Hydrothermal Oxidation of Silicon Carbide and Its Bearing on Wet Wear Mechanisms (K.G. Nickel, V. Presser, 0. Krummhauer, A. Kailer, and R. Wirth)RELIABILITY, NDE, AND FRACTOGRAPHY.Probabilistic Design Optimization and Reliability Assessment of High Temperature Thermoelectric Devices (O.M. Jadaan and A.A. Wereszczak).Development of a New Computational Method for Solving lnhomogeneous and Ultra Large Scale Model (H. Serizawa, A. Kawahara, S. ltoh and H. Murakawa).Optical Methods for Nondestructive Evaluation of Subsurface Flaws in Silicon Nitride Ceramics (J.G. Sun, Z.P. Liu, Z.J. Pei, N.S.L. Phillips, and J.A. Jensen).Fractographic Analysis of Miniature Theta Specimens (George D. Quinn).Author Index.

Jonathan Salem is a Materials Research Engineer at NASA Glenn Research Center in Cleveland, OH. He received a PhD in Mechanical engineering from the University of Washington and has authored or co-authored over 60 archival publications, over 70 proceedings publications, and four national and international standards on mechanics of ceramics. He is a fellow of American Society for Testing and Materials and received a NASA Manned Spaced Flight Awareness Award for work on ceramic bearings for the Space Shuttle Main Engine Turbo-pump. In 2004, he received the Richard M. Fulrath Award from the American Ceramic Society for development of technical standards for design of structural ceramics.

• Preface. Introduction.CORROSION.Corrosion Resistance of Ceramics in Vaporous and Boiling Sulfuric Acid (C.A. Lewinsohn, H. Anderson, M. Wilson, T. Lillo, and A. Johnson).Thermocouple Interactions during Testing of Melt Infiltrated Ceramic Matrix Composites (G. Ojard, G. Morscher, Y. Gowayed, U. Santhosh, J. Ahmaad, R. Miller, and R. John).Oxidation Resistance of Pressureless-Sintered Sic-AIN-Re2O3 Composites Obtained without Powder Bed (G. Magnani, F. Antolini, L. Beaulardi, F. Burgio, and C. Mingazzini).Characterization of the Re-oxidation Behavior of Anode-Supported SOFCs (Manuel Ettler, Norbert H. Menzler, Hans Peter Buchkremer, Detlev Stover).Healing Behavior of Machining Cracks in Oxide-Based Composite Containing Sic Particles (Toshio Osada, Wataru Nakao, Koji Takahashi, and Kotoji Ando).Effects of Oxidation on the Mechanical Properties of Pressureless-Sintered SiC-AIN-Y2O3 Composites Obtained without Powder Bed (G. Magnani, L. Beaulardi, E. Trentini).Fiber Push Out Testing Before and After Exposure: Results for an MI SiC/SiC Composite (G. Ojard, L. Riester, R. Trejo, R. Annis, Y. Gowayed, G. Morscher, K. An, R. Miller, and R. John).New Ceramics Surface Reinforcing Treatment using a Combination of Crack-Healing and Electron Beam Irradiation (Wataru Nakao, Youhei Chiba, Kotoji Ando, Keisuke Iwata, and Yoshitake Nishi).Effect of Si3N4 on the instability of Li2O-Containing Celsian in the BAS/Si3N4 Composites (Kuo-Tong Lee).FATIGUE, WEAR, AND CREEP.Rolling Contact Fatigue Properties and Fracture Resistance for Silicon Nitride Ceramics with Various Microstructures (Hiroyuki Miyazaki, Wataru Kanematsu, Hideki Hyuga, Yu-ichi Yoshizawa, Kiyoshi Hirao and Tatsuki Ohji).Fretting Fatigue of Engineering Ceramics (Thomas Schalk, Karl-Heinz Lang, and Detlef Lohe).Investigation into Cyclic Frequency Effects on Fatigue Behavior of an Oxide/Oxide Composite (Shankar Mall and Joon-Mo Ahn).Friction and Wear Behavior of AlBC Composites (Ellen Dubensky, Robert Newman, Aleksander J. Pyzik, and Amy Wetzel).Creep of Silicon Nitride Observed In Situ with Neutron Diffraction (G.A. Swift).Hydrothermal Oxidation of Silicon Carbide and Its Bearing on Wet Wear Mechanisms (K.G. Nickel, V. Presser, 0. Krummhauer, A. Kailer, and R. Wirth)RELIABILITY, NDE, AND FRACTOGRAPHY.Probabilistic Design Optimization and Reliability Assessment of High Temperature Thermoelectric Devices (O.M. Jadaan and A.A. Wereszczak).Development of a New Computational Method for Solving lnhomogeneous and Ultra Large Scale Model (H. Serizawa, A. Kawahara, S. ltoh and H. Murakawa).Optical Methods for Nondestructive Evaluation of Subsurface Flaws in Silicon Nitride Ceramics (J.G. Sun, Z.P. Liu, Z.J. Pei, N.S.L. Phillips, and J.A. Jensen).Fractographic Analysis of Miniature Theta Specimens (George D. Quinn).Author Index.