Materials Processing and Texture

A.D. Rollett obtained an M.A. in Metallurgy and Materials Science from Cambridge University, England in 1977 and a Ph.D. in Materials Engineering from Drexel University in 1987. He worked for the Los Alamos National Laboratory for sixteen years, rising to be the Deputy Director of the Materials Science & Technology Division in 1994. He then moved to Carnegie Mellon University to be the Department Head in Materials Science & Engineering until 2000. He is active in the Materials Research Science & Engineering Center at CMU and is the Focal Area Point of Contact for Computational Chemistry & Materials for the DoD.

• Preface xvAcknowledgments XVIIFriction Stir Welding and ProcessingTexture Evolution during Friction Stir Welding of Stainless Steel 3Jaehyung ChoTexture Development in Aluminum Friction Stir Welds 17Richard W. Fonda, Keith E. Knipling, John F. Bingert, Anthony P. Reynolds, Wei Tang, Kevin J. Colligan, and John A. Wert Microstructural Studies of a Friction-Stir-Welded AA5052 29N. T. Kumbhar, Santosh. K. Sahoo, R. Tewari, G. K. Dey, I. Samajdar, and K. BhanumurthyEffect of Microstructure on Mechanical Properties of Friction-Welded Joints between Aluminum Alloys (6061, 5052) and 304 Stainless Steel 35Í. T. Kumbhar, A. Laik, G. K. Dey, Ê. Bhanumurthy, J. Krishnan, D. J. Derose, R. L. Suthar, S. K. Sahoo, and I. SamajdarEffect of Texture on Fracture Limit Strain in Friction Stir Processed AZ31F3Mg Alloy 43Yutaka S. Sato, Akihiro Sugimoto, Hiroyuki Kokawa, and Chang-Woo LeeMicrostructure and Texture Analysis of Friction Stir Welds of Copper 53T. Saukkonen., K. Savolainen, J. Mononen, and H. HänninenTexture and Anisotropy In SteelsThe Effects of Texture on the Corrosion Resistance of SS304 Stainless Steel 63M. Azzi and J. A. SzpunarMicrostructural Characterization of Dual Phase Steels by Means of Electron Microscopy 71Liesbeth Barbé and Kim VerbekenGrain Size Effect on the Tensile Behavior of a FeMnC TWIP Steel in Relation with the Microstructure and Texture Evolutions 79David Barbier, Nathalie Gey, Alain Sébastien, and Michel HumbertCombination of Two X-Ray Diffraction Settings for Determining the Texture of Small Sheared Samples 87D. Barbier, Â. Bolle, J. J. Fundenberger, C. Laruelle, and A. TiduTexture of Non-Oriented Rolled Steels by X-Ray and Electron Diffraction 95Martin Öernik, Milos Predmersky, Andrej Lesko, and Erik HilinskiEffect of Coating Texture on Powdering Behavior of Industrially Produced Galvannealed Coating on IF, IFHS and HSQ Grade Steels 103A. Chakraborty, R.K. Ray, and D. BhattacharjeeIncluding Elastical Anisotropy Due to Texture in a Finite Element Model for the Prediction of Residual Stresses in Welds 115Koen Decroos, Carsten Ohms, and Yvan HoubaertTexture and Microstructure Evolution in a Fe-Si CGO Sheet during the Processing Route before Secondary Recrystallization 123Francisco Cruz-Gandarilla, Richard Penelle, Thierry Baudin, Hector Mendoza Leon, and J. G. Cabanas-MorenoTEM Study of the Inhibition Layer of Commercial Hot-Dip Galvanized Steels 131Jack Elia, Å. Petit, J -S Lecomte, B. Gay, and V. PitchonMeasurement of the Texture Sharpness in Grain-Oriented Electrical Steels 143M. Frommert, C. Zobrist, D. Raabe, S. Zaefferer, and L. Lahn, Á. BöttcherEffects of Composition and Coiling Temperature on Precipitation and Texture Formation in a Few Interstitial Free High Strength Steels 151Pampa Ghosh and R Ê RayMicrostructure and Texture Development in Warm Rolled High Strength IF Steels Containing Cu, Ñ and  161Arunansu Haldar and Chiradeep GhoshEffect of Tin on the Texture of Nonoriented Electrical Steels 173Chun-Kan Hou, Tong- Han Lee, and Chun-Chih LiaoEffect of Cold Rolled Reduction on the Texture and Plastic Strain Ratio of 2205 Duplex Stainless Steel 183Chun-Kan Hou and Chang-Chia LiuImportance of Dislocation Substructures in Texture Control of Low Carbon Steel 193Hirosuke InagakiTexture Control in Manufacturing Current and Future Grades of Low-Carbon Steel Sheet 207Leo A.I. Kestens and Roumen PetrovRelative Preference for Strain Localizations in Ultra Low Carbon Steel 217R. Khatirkar, L.A.I. Kestens, R. Petrov, and I. SamajdarInfluence of Texture on Surface-Roughening during Press Forming in Ti Added High Purity Ferritic Stainless Steel Sheets 223Ken Kimura, Masaharu Hatano, and Akihiko TakahashiEffect of Tin on the Recrystallization Behavior and Texture of Grain Oriented Electrical Steels 231Chun-Chih Liao, Chun-Kan HouEBSD Investigation of Phase Transformation in Low Carbon Steels 243Sophie Lubin, Anne-Françoise Gourgues-Lorenzon, Hélène Regle, Frank Montheillet, and Brigitte BacroixA Monte-Carlo Algorithm for the Zener Drag Effect in the Fe-3%Si Magnetic Alloys 251N. Maazi, R. Penelle, A. L. Etter, and T. BaudinEffect of Strain and Strain Path on Deformation Twinning and Strain Induced Martensite in AISI 316L and 304L Austenitic Stainless Steel 257S. K. Mishra, P. Pant, K. Narasimhan and I. SamajdarAnalysis of the Formation and Growth of Recrystallizing Grains in IF Steels by In-Situ EBSP 265H. Nakamichi and F. J. HumphreysStability of Secondary Recrystallization in Grain-Oriented Silicon Steel 275Eiichi Namba, Satoshi Arai, Hotaka Homma, and Yoshiyuki UshigamiA Practical Investigation into Identifying and Differentiating Phases in Steel using Electron Backscatter Diffraction 285Matthew M. Nowell, Stuart I. Wright, and John O. CarpenterInfluence of Precipitate Distribution on Normal Grain Growth Simulation at the Beginning of the Secondary Recrystallization Annealing in a Fe-3%Si Electrical Steel HiB - Role of the MnS and AIN Precipitates 293C. Sekkak, N. Rouag, and R. PenelleMicrostructure and Texture Development during Cold Ring Rolling of 100Cr6 301K. Ryttberg, M. Knutson Wedel, L. Nyborg, and P. DahlmanDevelopment of Texture, Microstructure and Grain Boundary Character Distribution after Heavy Cold Rolling and Annealing in a Boron Added Interstitial Free (IF) Steel 311Rajib Sana and R. K. RayTexture of Nb-Containing Ferritic Stainless Steel after Secondary Recrystallization 317Rodrigo P. Siqueira, Hugo R. Z. Sandim, and Tarcisio R. OliveiraQuantitative Prediction of Transformation Texture in Hot-Rolled Steel Sheets by Multiple KS Relation 325Toshiro Tomida, Masayuki Wakita, Mitsuru Yoshida, and Norio ImaiCrystallographic Characterization of a Phosphorus Added TRIP Steel 333Kim Verbeken, Liesbeth Barbé, and Dierk RaabeMicrostructural and Textural Evolutions in a Cold Rolled High Mn TWIP Steel 341Kim Verbeken, Lieven Bracke, Leo Kestens, and Jan PenningStored Energy Evolution in a Cold-Rolled IF Steel 349A. Wauthier, B. Bacroix, T. Chauveau, O. Castelnau, and H. RégléA Comparison of Texture Measurements Via EBSD and X-RAY 357Stuart I. Wright and Matthew M. NowellThe Measurement Approach of X-Ray Residual Stress in Fe-Ni Alloy with Different Textures 365Qiulin Wu, Xiaojun Hu, Zuming Fu, Haiyan Zhao, Bing Zhang, Yong Wang, Wei Fang, and Limin LiInfluence of Grain Orientation on Magnetic Aging Behavior of a Non-Oriented Silicon Steel Sheet 371L. Xu, W. Mao, P. Yang, and H. FengEffects of Magnetic FieldsEutectoid Point Shift and Orientation Relationships between Ferrite and Cementite in Pearlite in a High Magnetic Field 381Y. D. Zhang, C. Esling, H. Klein, X. Zhao, and L. ZuoCharacteristics of Recrystallization Texture of Cold-Rolled IF Steel Sheet Annealed with a Magnetic Field in the Transverse Direction 389Yan Wu , Changshu He, Yudong Zhang, Xiang Zhao, Liang Zuo, and Claude EslingCrystallographic Features during Martensitic Transformation in Ni-Mn-Ga Ferromagnetic Shape Memory Alloys 397D. Y. Cong, Y. D. Zhang, C. Esling, Y. D. Wang, X. Zhao, and L. ZuoGrain Boundary Misorientation and CSL in Magnetically Annealed Fe-0.75%Si 405C.M.B. Bacaltchuk, G.A. Castello-Branco, and H. GarmestaniThe Effect of Ultra-High Magnetic Fields on Grain Growth and Recrystallization in Metals 413A.D. Sheikh-Ali and H. GarmestaniNew Approach to Texturing and Grain Boundary Engineering by Magnetic Field Application 421Tadao Watanabe, Sadahiro Tsurekawa, Yudong Zhang, Xiang Zhao, Liang Zuo, and Claude EslingEffects of Magnetic Field Direction on Texture Evolution in a Cold-Rolled IF Steel Sheet during High Magnetic Field Annealing 435Yan Wu, Changshu He, Xiang Zhao, and Liang ZuoHexagonal MetalsElectrochemical Behavior of (001), (100) and (110) Ti Single Crystals under Simulated Body Fluid Condition 443M. Azzi, S. Faghihi, M. Tabrizian, and J. A. SzpunarIdentification and Rationalization of Secondary Twin Variants in a Magnesium Alloy 451M. R. Barnett and P. CizekTextures in HCP Titanium and Zirconium: Influence of Twinning 461Nathalie Bozzolo and Francis WagnerTexture and Microstructure Evolution during Asymmetric Rolling of Mg Alloys 473Jaehyung Cho, Hyung-Wuk Kim, and Suk-Bong KangPrediction of Anisotropic Properties in Mg Alloy Sheets Using the Crystal Plasticity Finite Element Method 483S.-H. Choi, J.K. Choi, H.W. Lee, and D.H. KimStrain Hardening Behaviour of an Initially Textured TI6AL4V Titanium Alloy as a Function of Strain Rate and Compression Direction 491Frederik Coghe, Luc Rabet, and Paul Van HoutteTexture Evolution during the Static Recrystallization of Three Binary Mg-Y Alloys 501R. Cottam, J. Robson, G. Lorimer, and B. DavisGrain Size and Orientation Distribution Function of High Purity á-Titanium 509Bradley S. Fromm, Brent L. Adams, Sadegh Ahmadi, and Marko KnezevicTextures in Titanium Alloys - An Industrial Perspective on Deformation, Transformation and Properties 521David Rugg, David Furrer, and Nigel BrewittAnnealing Related Microstructural Developments in a Two-Phase ZR-2.5 Nb Alloy 533V.D. Hiwarkar, S.K. Sahoo, I. Samajdar, K. Narasimhan, Ê. V. Mani krishna, G.K. Dey, D. Srivastav, R. Tiwari, and S. BanarjeeTexture Aspects of Delayed Hydride Cracking in Products from Zr-Based Alloys 539Margarita Isaenkova and Yuriy PerlovichEffect of Twinning on the Strain Hardening Behaviors of Two Mg Alloys Deformed Along Four Different Strain Paths 547L. Jiang and J.J. JonasEBSD Study of Annealing Rolled Zirconium 555L. Jiang, M.T. Pérez-Prad, O.A. Ruan, and M.E. KassnerTexture Evolution during Multi-Pass Equal Channel Angular Extrusion of Beryllium 563Saiyi Li, David J. Alexander, Irene J. Beyerlein, and Donald W. BrownA Mechanism of Determining the Formability of AZ31 near Room Temperature 571Hualong Li, Emilie Hsu, and Jerzy SzpunarAn EBSD Study of the Misorientations Related to Dynamic Recrystallization in Mg AM30 Deformed At High Temperatures 577Etienne Martin, Stéphane Godet, Lan Jiang, Abdelbaset Elwazri, Pascal J. Jacques, and John J. JonasTexture Evolution in Boron Modified Ti-6AI-4V Alloy 585Shibayan Roy, Nilesh Gurao, Satyam Suwas, S. Tamirisakandala, R. Srinivasan, and D.B. MiracleHeterogeneous Deformation in Single-Phase Zircaloy 2 593S. Ê. Sahoo, V. D. Hiwarkar, I. Samajdar, P. Pant, D. Srivastav, R. Tewari, G. K. Dey and S. BanerjeeTexture of Magnesium Alloy Sheets Heavily Rolled by High Speed Warm Rolling 601Tetsuo Sakai, Satoshi Minamiguchi, Hiroaki Koh, and Hiroshi UtsunomiyaMicrostructure and Texture Gradient in Titanium Severely Strained by Friction Roll Processing and Subsequent Annealing 609Meiqin Shi, Tomohiro Umetsu, Yoshimasa Takayama, Hajime Kato, and Hideo WatanabeEvolution of Transformation Texture in a Metastable ß-Titanium Alloy 617Satyam Suwas, Nilesh P. Gurao, Ashkar AliDislocations in Textured Mg-4.5%AI-1 %Zn Alloy: TEM and Statistical Studies 629V.N. Timofeev, V.N. Serebryany, and Yu A. ZaliznyakMicrostructure and Micro-Texture Evolution of Compression Twins in Magnesium 637P. Yang, L. Meng, ×. Li, W. Mao, and L. ChenTexture In Materials DesignAccessing the Texture Hull and Properties Closure by Rotation and Lamination: Results in the Primitive Basis of Dilation Functions 647Brent L. Adams and David T. FullwoodCorrelation Relationship between Yield Strength and the Elastic Compliance for the Polycrystalline Nickel 201 657Sadegh Ahmadi, Brent L. Adams, David T. Fullwood, and Bradley S. FrommModeling Rolling Texture of Twinned Cu Single Crystals 665Khaled Al-Fadhalah, Armand Beaudoin, and Marek NiewczasMultiscale Modeling of Equal Channel Angular Extruded Aluminum with Strain Gradient Crystal Plasticity and Phenomenological Models 671L. Duchêne, M.G.D. Geers, W.A.M. Brekelmans, E. Chen, B. Verlinden, and A.M. HabrakenEffect of Deformation Constraints on the Texture Formation in Al-5mass%Mg Solid Solution at High Temperatures 679Kazuto Okayasu, Masayuki Sakakibara, and Hiroshi FukutomiSpectral Methods in the Statistical Description and Design of Microstructure 687D.T. Fullwood, B.L. Adams, K.A. Stevens, S.R. Niezgoda, and S.R. KalidindiA Comparison of Deformation Textures and Mechanical Properties Predicted by Different Crystal Plasticity Codes 701Craig S. Hartley, Paul R. Dawson, Donald E. Boyce, Surya R. Kalidindi, Marko Knezevic, Carlos Tomé, Ricardo Lebensohn, S. Lee Semiatin, Todd J. Turner, and Ayman A. SalemSimulation of Texture Development in Pure Aluminum Deformed by Equal Channel Angular Pressing 713Majid Hoseini, Mahmood Meratian, Hualong Li, and Jerzy SzpunarPlastic Heterogeneity Due to Grain Boundaries and Its Influence on Global Deformation Textures 721Anand Ê Kanjarla, Paul Van Houtte, and Laurent DelannayOn the Correlation of Surface Texture and Strain Induced Surface Roughness in AA6XXX Aluminum Sheet 731S. Küsters, M. Seefeldt, and P. Van HoutteThe Variation Range for the Results of FCC Texture Simulations Based on {111 }<110> Slip 743Torben LettersDevelopment of Low Magnetism and Strongly Cube-Textured Composite Ni-7%W/Ni-10%W Substrate for Coated Superconductor 751Dan-min Liu, Fei Hao, Jiu-xing Zhang, Yan-cao Hu, Mei-ling Zhou, and Wei-peng LiuTwo-Point Orientation Coherence Functions: An Orthonormal Series Solution 759Peter R. MorrisThe Influence of Shear Bands on Microtexture Evolution in Polycrystalline Copper 765H. Paul and J.H. DriverInfluence of Dislocation Stress on the Corrosion Behavior of (111) and (123) Surface Plane of Aluminum Single Crystal 775Dashi Pei, Weimin Mao, and Huiping FengTexture Randomization by Intense Shearing in Layered AI and AI (0.3%Sc) ARB-Processed Sheet 783M.Z. Quadir, O. Al-Buhamad, L. Bassman, and M. FerryTexture Development of Molybdenum Sheets during Last Step of Heat Treatment 791C.-G. Oerrel, I. Hünsche, W. Skrotzki, A. Lorich, and W. KnablSolute, Superplasticity and Texture Change in Aluminium Alloys 801K. Sotoudeh, P.S. Bate, and F.J. HumphreysTexture-Based Plastic Potentials in Stress Space 809Albert Van Bael, Sampath K. Yerra, Paul Van Houtte, and Albert Van BaelHierarchical Multi-Level Modelling of Plastic Anisotropy using Convex Plastic Potentials 817Paul Van Houtte, Sampath K. Yerra, and Albert Van BaelAuthor Index 827