Dongming Zhu is a senior Materials Research Engineer at Army Research Laboratory, Vehicle Technology Directorate, and Durability and Protective Coatings Branch of Structures and Materials Division, at NASA Glenn Research Center. His expertise covers the areas of thermal conductivity, lattice defects and transport, high temperature oxidation, high-heat-flux testing, and mechanical behavior of ceramic coating systems, with an emphasis on experimental investigation and analytical modeling of processing, thermal fatigue and fracture behavior of advanced protective coatings and composites. His major contributions include the development of low conductivity thermal barrier coatings for turbine airfoil applications, 1650°C thermal/environmental barrier coatings for SiC/SiC ceramic matrix composite turbine vane and combustor liner applications. He has authored more than 100 archival publications and three patents. He is a member of the American Ceramic Society and ASM, International, has been a lead organizer for several International Symposia. He is currently the Chair-elect of the Engineering Ceramic Division of the American Ceramic Society, and an associate editor of the International Journal of Applied Ceramic Technology. He has received several awards from NASA and professional societies. He received his Ph.D. degree in Chemical Engineering and Materials Science from the University of Minnesota in 1996.

"The present volume contains sixteen contributed papers from the symposium, with topics including advanced coating processing, advanced coating for wear, corrosion, and oxidation resistance, and thermal and mechanical properties, highlighting the state-of-the-art ceramic coatings technologies for various critical engineering applications." (Azom, 25 January 2011)

• Preface viiIntroduction ixTHERMAL AND ENVIRONMENTAL BARRIER COATINGSKinetics and Mechanism of Oxidation of the Reinforced Carbon/Carbon on the Space Shuttle Orbiter 3Nathan Jacobson, David Hull, James Cawley, and Donald CurryThermomechanical Fatigue Life of TBCS—Experimental and Modeling Aspects 23Sören Sjöström and Hakan BrodinOxidation-Induced Stresses in Thermal Barrier Coating Systems 41Hugh E EvansStrength Degrading Mechanisms in Plasma Spray Coated Silicon Nitride 57Ramakrishna T. Bhatt Dennis S. Fox, and Abdul-Aziz ANEffect of Microstructure Change of APS-TBCS on the Interfacial Mechanical Property under Shear Loading 67Makoto Hasegawa and Hiroshi FukutomiEffect of Thermal Gradient on the Through-Thickness Thermal Conductivity of Plasma-Sprayed TBCS 75Yang Tan, Jon Longtin, Sanjay Sampath, and Dongming ZhuThermal Property Measurement for Thermal Barrier Coatings by Thermal Imaging Method 87J. G. SunResearch on MoSi2-Based Oxidation Protective Coating for SiC-Coated Carbon/Carbon Composites Prepared by Supersonic Plasma Spraying 95Cao Wei, Li Hejun.Wu Heng, Xue Hui, Fu Qiangang, Ma Chao, Wang Yongjie, and Wei JianfengADVANCED COATINGS FOR WEAR AND CORROSION APPLICATIONS 105LAFAD-Assisted Plasma Surface Engineering Processes for Wear and Corrosion Protection: A Review 105V. GorokhovskyAluminum Oxide and Silicon Nitride Thin Films as Anti-Corrosion Layers 123C. Qu, P. Li, J. Fan, D. Edwards, W. Schulze, G. Wynick, R. E. Miller, L. Lin, Q. Fang, K. Bryson, H. Rubin, and X. W. WangPlasma Nitrided Austenitic Stainless Steel for Biomedical 135Applications 135O. Gokcekaya, S. Yilmaz, C. Ergun, B. Kaya, and O. YücelA Report on the Microstructure of As-Fabricated, Heat Treated and Irradiated ZrC Coated Surrogate TRISO Particles 147Gokul Vasudevamurthy, Yutai Katoh, Jun Aihara, Shohei Ueta, Lance L. Snead, and Kazuhiro SawaADVANCED COATING PROCESSINGIntroduction to High Velocity Suspension Flame Spraying (HVSFS) 161R. Gadow, A. Killinger, J. Rauch, and A. ManzatElectrophoretic Deposition of Oxide Powder by Using Non-Flammable Organic Solvent 177Hideyuki Negishi, Ai Miyamoto, Akira Endo, Keiji Sakaki, Hiroshi Yanagishita, and Kunihiro WatanabeUse of Glass-Ceramic Coatings Containing Water-Reactive Components as a Bonding Layer between Concrete and Metal 187Charles A Weiss, Jr., Sean W. Morefield, Philip G. Malone, Karen S. Henry, Sean P. Harte, and Michael L. KoenigsteinAuthor Index 193

Dongming Zhu is a senior Materials Research Engineer at Army Research Laboratory, Vehicle Technology Directorate, and Durability and Protective Coatings Branch of Structures and Materials Division, at NASA Glenn Research Center. His expertise covers the areas of thermal conductivity, lattice defects and transport, high temperature oxidation, high-heat-flux testing, and mechanical behavior of ceramic coating systems, with an emphasis on experimental investigation and analytical modeling of processing, thermal fatigue and fracture behavior of advanced protective coatings and composites. His major contributions include the development of low conductivity thermal barrier coatings for turbine airfoil applications, 1650°C thermal/environmental barrier coatings for SiC/SiC ceramic matrix composite turbine vane and combustor liner applications. He has authored more than 100 archival publications and three patents. He is a member of the American Ceramic Society and ASM, International, has been a lead organizer for several International Symposia. He is currently the Chair-elect of the Engineering Ceramic Division of the American Ceramic Society, and an associate editor of the International Journal of Applied Ceramic Technology. He has received several awards from NASA and professional societies. He received his Ph.D. degree in Chemical Engineering and Materials Science from the University of Minnesota in 1996.

"The present volume contains sixteen contributed papers from the symposium, with topics including advanced coating processing, advanced coating for wear, corrosion, and oxidation resistance, and thermal and mechanical properties, highlighting the state-of-the-art ceramic coatings technologies for various critical engineering applications." (Azom, 25 January 2011)

• Preface viiIntroduction ixTHERMAL AND ENVIRONMENTAL BARRIER COATINGSKinetics and Mechanism of Oxidation of the Reinforced Carbon/Carbon on the Space Shuttle Orbiter 3Nathan Jacobson, David Hull, James Cawley, and Donald CurryThermomechanical Fatigue Life of TBCS—Experimental and Modeling Aspects 23Sören Sjöström and Hakan BrodinOxidation-Induced Stresses in Thermal Barrier Coating Systems 41Hugh E EvansStrength Degrading Mechanisms in Plasma Spray Coated Silicon Nitride 57Ramakrishna T. Bhatt Dennis S. Fox, and Abdul-Aziz ANEffect of Microstructure Change of APS-TBCS on the Interfacial Mechanical Property under Shear Loading 67Makoto Hasegawa and Hiroshi FukutomiEffect of Thermal Gradient on the Through-Thickness Thermal Conductivity of Plasma-Sprayed TBCS 75Yang Tan, Jon Longtin, Sanjay Sampath, and Dongming ZhuThermal Property Measurement for Thermal Barrier Coatings by Thermal Imaging Method 87J. G. SunResearch on MoSi2-Based Oxidation Protective Coating for SiC-Coated Carbon/Carbon Composites Prepared by Supersonic Plasma Spraying 95Cao Wei, Li Hejun.Wu Heng, Xue Hui, Fu Qiangang, Ma Chao, Wang Yongjie, and Wei JianfengADVANCED COATINGS FOR WEAR AND CORROSION APPLICATIONS 105LAFAD-Assisted Plasma Surface Engineering Processes for Wear and Corrosion Protection: A Review 105V. GorokhovskyAluminum Oxide and Silicon Nitride Thin Films as Anti-Corrosion Layers 123C. Qu, P. Li, J. Fan, D. Edwards, W. Schulze, G. Wynick, R. E. Miller, L. Lin, Q. Fang, K. Bryson, H. Rubin, and X. W. WangPlasma Nitrided Austenitic Stainless Steel for Biomedical 135Applications 135O. Gokcekaya, S. Yilmaz, C. Ergun, B. Kaya, and O. YücelA Report on the Microstructure of As-Fabricated, Heat Treated and Irradiated ZrC Coated Surrogate TRISO Particles 147Gokul Vasudevamurthy, Yutai Katoh, Jun Aihara, Shohei Ueta, Lance L. Snead, and Kazuhiro SawaADVANCED COATING PROCESSINGIntroduction to High Velocity Suspension Flame Spraying (HVSFS) 161R. Gadow, A. Killinger, J. Rauch, and A. ManzatElectrophoretic Deposition of Oxide Powder by Using Non-Flammable Organic Solvent 177Hideyuki Negishi, Ai Miyamoto, Akira Endo, Keiji Sakaki, Hiroshi Yanagishita, and Kunihiro WatanabeUse of Glass-Ceramic Coatings Containing Water-Reactive Components as a Bonding Layer between Concrete and Metal 187Charles A Weiss, Jr., Sean W. Morefield, Philip G. Malone, Karen S. Henry, Sean P. Harte, and Michael L. KoenigsteinAuthor Index 193

Dongming Zhu is a senior Materials Research Engineer at Army Research Laboratory, Vehicle Technology Directorate, and Durability and Protective Coatings Branch of Structures and Materials Division, at NASA Glenn Research Center. His expertise covers the areas of thermal conductivity, lattice defects and transport, high temperature oxidation, high-heat-flux testing, and mechanical behavior of ceramic coating systems, with an emphasis on experimental investigation and analytical modeling of processing, thermal fatigue and fracture behavior of advanced protective coatings and composites. His major contributions include the development of low conductivity thermal barrier coatings for turbine airfoil applications, 1650°C thermal/environmental barrier coatings for SiC/SiC ceramic matrix composite turbine vane and combustor liner applications. He has authored more than 100 archival publications and three patents. He is a member of the American Ceramic Society and ASM, International, has been a lead organizer for several International Symposia. He is currently the Chair-elect of the Engineering Ceramic Division of the American Ceramic Society, and an associate editor of the International Journal of Applied Ceramic Technology. He has received several awards from NASA and professional societies. He received his Ph.D. degree in Chemical Engineering and Materials Science from the University of Minnesota in 1996.

"The present volume contains sixteen contributed papers from the symposium, with topics including advanced coating processing, advanced coating for wear, corrosion, and oxidation resistance, and thermal and mechanical properties, highlighting the state-of-the-art ceramic coatings technologies for various critical engineering applications." (Azom, 25 January 2011)

• Preface viiIntroduction ixTHERMAL AND ENVIRONMENTAL BARRIER COATINGSKinetics and Mechanism of Oxidation of the Reinforced Carbon/Carbon on the Space Shuttle Orbiter 3Nathan Jacobson, David Hull, James Cawley, and Donald CurryThermomechanical Fatigue Life of TBCS—Experimental and Modeling Aspects 23Sören Sjöström and Hakan BrodinOxidation-Induced Stresses in Thermal Barrier Coating Systems 41Hugh E EvansStrength Degrading Mechanisms in Plasma Spray Coated Silicon Nitride 57Ramakrishna T. Bhatt Dennis S. Fox, and Abdul-Aziz ANEffect of Microstructure Change of APS-TBCS on the Interfacial Mechanical Property under Shear Loading 67Makoto Hasegawa and Hiroshi FukutomiEffect of Thermal Gradient on the Through-Thickness Thermal Conductivity of Plasma-Sprayed TBCS 75Yang Tan, Jon Longtin, Sanjay Sampath, and Dongming ZhuThermal Property Measurement for Thermal Barrier Coatings by Thermal Imaging Method 87J. G. SunResearch on MoSi2-Based Oxidation Protective Coating for SiC-Coated Carbon/Carbon Composites Prepared by Supersonic Plasma Spraying 95Cao Wei, Li Hejun.Wu Heng, Xue Hui, Fu Qiangang, Ma Chao, Wang Yongjie, and Wei JianfengADVANCED COATINGS FOR WEAR AND CORROSION APPLICATIONS 105LAFAD-Assisted Plasma Surface Engineering Processes for Wear and Corrosion Protection: A Review 105V. GorokhovskyAluminum Oxide and Silicon Nitride Thin Films as Anti-Corrosion Layers 123C. Qu, P. Li, J. Fan, D. Edwards, W. Schulze, G. Wynick, R. E. Miller, L. Lin, Q. Fang, K. Bryson, H. Rubin, and X. W. WangPlasma Nitrided Austenitic Stainless Steel for Biomedical 135Applications 135O. Gokcekaya, S. Yilmaz, C. Ergun, B. Kaya, and O. YücelA Report on the Microstructure of As-Fabricated, Heat Treated and Irradiated ZrC Coated Surrogate TRISO Particles 147Gokul Vasudevamurthy, Yutai Katoh, Jun Aihara, Shohei Ueta, Lance L. Snead, and Kazuhiro SawaADVANCED COATING PROCESSINGIntroduction to High Velocity Suspension Flame Spraying (HVSFS) 161R. Gadow, A. Killinger, J. Rauch, and A. ManzatElectrophoretic Deposition of Oxide Powder by Using Non-Flammable Organic Solvent 177Hideyuki Negishi, Ai Miyamoto, Akira Endo, Keiji Sakaki, Hiroshi Yanagishita, and Kunihiro WatanabeUse of Glass-Ceramic Coatings Containing Water-Reactive Components as a Bonding Layer between Concrete and Metal 187Charles A Weiss, Jr., Sean W. Morefield, Philip G. Malone, Karen S. Henry, Sean P. Harte, and Michael L. KoenigsteinAuthor Index 193