Ansel C. Ugural, Ph.D., is a visiting professor of mechanical engineering at the New Jersey Institute of Technology, Newark, New Jersey. He was a National Science Foundation fellow and has taught at the University of Wisconsin-Madison, Madison, Wisconsin. Dr. Ugural held positions at Fairleigh Dickinson University, where he served for two decades as a professor and chairman of the mechanical engineering department. He has considerable and diverse industrial experience in both full-time and consulting capacities as a design, development, and research engineer.Dr. Ugural earned his M.S. in mechanical engineering and Ph.D. in engineering mechanics from the University of Wisconsin–Madison. He has been a member of the American Society of Mechanical Engineers and the American Society of Engineering Education. He is also listed in Who’s Who in Engineering.Professor Ugural is the author of several books, including Mechanical Design: An Integrated Approach (McGraw-Hill, 2004); Mechanical Design of Machine Components (CRC Press, 2nd ed., 2015); Stresses in Plates and Shells (McGraw-Hill, 1999); Plates and Shells: Theory and Analysis (CRC Press, 4th ed., 2016); Mechanics of Materials (McGraw-Hill, 1990); and Mechanics of Materials (Wiley, 2008). Some of these books have been translated into Korean, Chinese, and Portuguese. Dr. Ugural is also the coauthor (with S.K. Fenster) of Advanced Mechanics of Materials and Applied Elasticity (Pearson, 6th ed., 2020). In addition, he has published numerous articles in trade and professional journals.

• SECTION 1 Fundamentals. Chapter 1. Introduction. Chapter 2. Materials. Chapter 3. Stress and Strain. Chapter 4. Deflection and Impact. Chapter 5. Energy Methods and Stability. SECTION II Failure Prevention. Chapter 6. Static Failure Criteria and Liability. Chapter 7. Fatigue Failure Criteria. Chapter 8. Surface Failure. SECTION III Machine Component Design. Chapter 9. Shafts and Associated Parts. Chapter 10. Bearings and Lubrication. Chapter 11. Spur Gears. Chapter 12. Helical, Bevel, and Worm Gears. Chapter 13. Belts, Chains, Clutches, and Brakes. Chapter 14. Springs. Chapter 15. Power Screws, Fasteners, and Connections. Chapter 16. Miscellaneous Mechanical Components. Chapter 17. Finite Element Analysis in Design*. Chapter 18. Case Studies in Machine Design. Appendix A: Tables. Appendix B: Material Properties. Appendix C: Stress-Concentration Factors. Appendix D: Solution of the Stress Cubic Equation. Appendix E: Introduction to MATLAB®. Problem answers. References. Index.

Ansel C. Ugural, Ph.D., is a visiting professor of mechanical engineering at the New Jersey Institute of Technology, Newark, New Jersey. He was a National Science Foundation fellow and has taught at the University of Wisconsin-Madison, Madison, Wisconsin. Dr. Ugural held positions at Fairleigh Dickinson University, where he served for two decades as a professor and chairman of the mechanical engineering department. He has considerable and diverse industrial experience in both full-time and consulting capacities as a design, development, and research engineer.Dr. Ugural earned his M.S. in mechanical engineering and Ph.D. in engineering mechanics from the University of Wisconsin–Madison. He has been a member of the American Society of Mechanical Engineers and the American Society of Engineering Education. He is also listed in Who’s Who in Engineering.Professor Ugural is the author of several books, including Mechanical Design: An Integrated Approach (McGraw-Hill, 2004); Mechanical Design of Machine Components (CRC Press, 2nd ed., 2015); Stresses in Plates and Shells (McGraw-Hill, 1999); Plates and Shells: Theory and Analysis (CRC Press, 4th ed., 2016); Mechanics of Materials (McGraw-Hill, 1990); and Mechanics of Materials (Wiley, 2008). Some of these books have been translated into Korean, Chinese, and Portuguese. Dr. Ugural is also the coauthor (with S.K. Fenster) of Advanced Mechanics of Materials and Applied Elasticity (Pearson, 6th ed., 2020). In addition, he has published numerous articles in trade and professional journals.

• SECTION 1 Fundamentals. Chapter 1. Introduction. Chapter 2. Materials. Chapter 3. Stress and Strain. Chapter 4. Deflection and Impact. Chapter 5. Energy Methods and Stability. SECTION II Failure Prevention. Chapter 6. Static Failure Criteria and Liability. Chapter 7. Fatigue Failure Criteria. Chapter 8. Surface Failure. SECTION III Machine Component Design. Chapter 9. Shafts and Associated Parts. Chapter 10. Bearings and Lubrication. Chapter 11. Spur Gears. Chapter 12. Helical, Bevel, and Worm Gears. Chapter 13. Belts, Chains, Clutches, and Brakes. Chapter 14. Springs. Chapter 15. Power Screws, Fasteners, and Connections. Chapter 16. Miscellaneous Mechanical Components. Chapter 17. Finite Element Analysis in Design*. Chapter 18. Case Studies in Machine Design. Appendix A: Tables. Appendix B: Material Properties. Appendix C: Stress-Concentration Factors. Appendix D: Solution of the Stress Cubic Equation. Appendix E: Introduction to MATLAB®. Problem answers. References. Index.

Ansel C. Ugural, Ph.D., is a visiting professor of mechanical engineering at the New Jersey Institute of Technology, Newark, New Jersey. He was a National Science Foundation fellow and has taught at the University of Wisconsin-Madison, Madison, Wisconsin. Dr. Ugural held positions at Fairleigh Dickinson University, where he served for two decades as a professor and chairman of the mechanical engineering department. He has considerable and diverse industrial experience in both full-time and consulting capacities as a design, development, and research engineer.Dr. Ugural earned his M.S. in mechanical engineering and Ph.D. in engineering mechanics from the University of Wisconsin–Madison. He has been a member of the American Society of Mechanical Engineers and the American Society of Engineering Education. He is also listed in Who’s Who in Engineering.Professor Ugural is the author of several books, including Mechanical Design: An Integrated Approach (McGraw-Hill, 2004); Mechanical Design of Machine Components (CRC Press, 2nd ed., 2015); Stresses in Plates and Shells (McGraw-Hill, 1999); Plates and Shells: Theory and Analysis (CRC Press, 4th ed., 2016); Mechanics of Materials (McGraw-Hill, 1990); and Mechanics of Materials (Wiley, 2008). Some of these books have been translated into Korean, Chinese, and Portuguese. Dr. Ugural is also the coauthor (with S.K. Fenster) of Advanced Mechanics of Materials and Applied Elasticity (Pearson, 6th ed., 2020). In addition, he has published numerous articles in trade and professional journals.

• SECTION 1 Fundamentals. Chapter 1. Introduction. Chapter 2. Materials. Chapter 3. Stress and Strain. Chapter 4. Deflection and Impact. Chapter 5. Energy Methods and Stability. SECTION II Failure Prevention. Chapter 6. Static Failure Criteria and Liability. Chapter 7. Fatigue Failure Criteria. Chapter 8. Surface Failure. SECTION III Machine Component Design. Chapter 9. Shafts and Associated Parts. Chapter 10. Bearings and Lubrication. Chapter 11. Spur Gears. Chapter 12. Helical, Bevel, and Worm Gears. Chapter 13. Belts, Chains, Clutches, and Brakes. Chapter 14. Springs. Chapter 15. Power Screws, Fasteners, and Connections. Chapter 16. Miscellaneous Mechanical Components. Chapter 17. Finite Element Analysis in Design*. Chapter 18. Case Studies in Machine Design. Appendix A: Tables. Appendix B: Material Properties. Appendix C: Stress-Concentration Factors. Appendix D: Solution of the Stress Cubic Equation. Appendix E: Introduction to MATLAB®. Problem answers. References. Index.