Dr. Srikari S is a Professor in Automotive and Aeronautical Engineering Department. Specialization in Ceramics and composites, coatings, biomaterials, selection of materials and manufacturing processes for aerospace, automotive applications. Working has Head of Bio-materials Research Center, previously worked has Associated Dean Research and Head of the Department. Had worked as PI and Co-PI for more than 8 sponsored projects from DST, AR&DB, GTRE, ICMR, DBT, BRNS and Faurecia Clean Mobility. Sponsored projects were aimed at development and studies on coatings for various applications like biomaterials, energy and sensors. Have conducted several corporate trainings on Selection of Materials and Manufacturing for Automotive and Aerospace Industries. Have supervised more than 30 PG students on material and manufacturing solutions for automotive and aerospace applications and 2 Ph.D. Scholars.Dr Suresh R is Professor in the Department of Mechanical and Manufacturing Engineering, MS Ramaiah University of Applied Sciences, Bangalore, India. His passion for research runs deep into areas such as the processing of hard and refractory materials, traditional and non-traditional machining, surface Engineering, metal matrix composites, Joining Process, Additive Manufacturing and robotics and automation system. He has organized several national and international conferences and workshops in the field of material science and manufacturing. He has authored more than 150 peer reviewed international journals papers and received research grants from AICTE, DST and KCTU, GoK. He received “Outstanding Scientist Award” from the Centre for advanced Research and Design Chennai in 2015 and ‘’Annual Exemplary Faculty-Research 2020’’ Award from RUAS in 2020. He is an official reviewer of original research articles in the field of materials and manufacturing. He is also a member of MISTE, SAE India and other Professional Societies, and is an active cons

• 1. Development of a Nanocrystalline Cellulose-Based Film to Combat the Staining Potential of Silver Diamine Fluoride 2. Papilla Reconstruction with Titanium-Prepared Platelet-Rich Fibrin: A Case Report and Literature Review 3. Evaluation of Platelet Rich Fibrin with Biodentine in Direct Pulp Therapy of Permanent Teeth — An in Vivo Study Arbiya Anjum, Swaroop Hegde, Rhea S. Mathew, Shruthika Mahajan and Shruthi Nagaraja 4. Formulation and Characterization of a Novel Drug Loaded Nano-Sponge for Vital Pulp Therapy 5. Comparison of the Retentive Properties of a Removable Partial Denture Clasp Fabricated by 3-D Printing and Laser Sintering — An In-Vitro Study 6. Characterization of a Novel Drug Delivery System to Enhance Regeneration in Endodontics 7. Effect of Surface Characteristics on Streptococcus Mutans Adhesion on Nickel Titanium (Niti) and Coaxial Stainless Steel Archwires—A Comparative Prospective Clinical Study 8. Evaluation of Cynodon Dactylon Gel as an Avulsion Medium: An In Vitro Study 9. Evaluation of Antimicrobial Effect of Osteopontin against Caries Causing Bacteria 10. In-Vitro Anti-Bacterial Effect of Lyophilized Umbilical Cord Blood Platelet Rich Plasma against Streptococcus Mutans 11. Modified Endodontic Bioceramic Sealer Comprising Gold Nanoparticles and PNIPAAm for Enhanced Antibacterial Ability against Enterococcus Faecalis 12. Bioactive Botanicals: Evaluating Cynodon dactylon’s Antioxidant Role in Intracanal Treatment 13. Gas Chromatography Analysis of Bioactive Compounds from Sargassum Wightii Extract for Periodontal Therapy 14. Insilico Analysis of Compounds Isolated from Mulberry Plant Source for Anti Cariogenicity 15. Comparative Evaluation of Anti-microbial Efficacy of Ocimum Sanctum (Tulsi) extract, Ocimum Sanctum with Silver Nanoparticles and 0.12% Chlorhexidine: An Invitro Study 16. Demineralized Tooth as Bone Graft Material: A Systematic Review 17. Assessment of Proliferative Effect of Human Adult Peripheral and Umbilical Cord Blood Platelet-Rich Fibrin Enhanced with Gold Nanoparticles on Human Dental Pulp Stem Cells: An In-Vitro Study 18. “Knocking on Nature’s Door”—An in Vitro Validation of the Anti-Inflammatory, Anti-Microbial Efficacy of Convolvulus Pluricaulis 19. Formulation and Assessment of Cytotoxicity of Mg-Cu Alloy in Combination with Xenogenic Bone Graft—An In-Vitro Study 20. A Novel Formulation of Collagen and Albumin-Based Nanoparticles: Optimization of the Methodology and in Vitro Validation 21. Bridging the Gap Between Phytopharmaceuticals and Periodontology: Coleus Amboinicus as a Potential Topical Treatment Modality 22. Lemongrass oil Infused Dental Wafers: A Natural Shield against Oral Pathogens 23. Comparative 3D Finite Element Analysis of Stress Distribution and Displacement Patterns in Craniofacial Structures Using Hyrax and Memorax Maxillary Expansion Appliances 24. SPT based Liquefaction Prediction of Soils Employing AI Techniques 25. Thermal Stability of the Magnetic Tunnel Junction Stack and their Magnetic Properties 26. Comparative Study of Synthesis Methods of All Inorganic Lead-Free Bromide Perovskite 27. Optimization for Soft Magnetic Properties of [NiFe/Ta]n Multilayer for Magnetic Flux Concentrator 28. Finite Element Analysis of CNC Dry Machining for Alloy Workpiece using Ansys Workbench 29. Efficient CO2 Capture: Activated Porous Carbon from D-Glucose with Non Corrosive Activating Agent 30. Urea-Formaldehyde Microcapsules for the Detection of Microcracks in Polymer Composites 31. Development of Linear Bipolar and Non-Hysteretic Spin Valve GMR Sensor 32. Prediction of Equivalent Plastic Strain in Cold Spray Process using Feedforward Artificial Neural Network 33. One-pot Hydrothermal Synthesis of Zinc Gallate Nanoparticles: A Study of the Structural, Optical, Morphological and Electrical Properties 34. Graphene Nanoplatelets Based Material for Energy Storage Applications 35. Biopolymer-Based Plant Extracts Mediated-Silver Nanoparticles as Antibacterial Dressing 36. Simulations of Impacts on AA2219-T87 Plates 37. Evaluation of Antimicrobial Property of Natural C-Dots 38. Release Mechanisms of Montelukast Sodium from Transdermal Films Based on Sodium Alginate and Lignosulphonic Acid 39. Magnetically Targeted Drug Delivery of Levodopa in Parkinson’s Disease using Magnetite Loaded Ligno-Alginate 40. Kraft Lignin-Based Nanocarrier for Improved Sorafenib Release in Hepatocellular Carcinoma Treatment 41. Microwave Absorption Characterization of NCQD-RGO Composites using Rectangular Waveguide for Stealth Applications 42. Enhancing Pest Control Sustainability: Ligno-Alginate Blend for Controlled Pyrethrin Release 43. An Static and Fatigue Study of Glass Fiber Reinforced Polymer using Carbon Nano Tubes

Dr. Srikari S is a Professor in Automotive and Aeronautical Engineering Department. Specialization in Ceramics and composites, coatings, biomaterials, selection of materials and manufacturing processes for aerospace, automotive applications. Working has Head of Bio-materials Research Center, previously worked has Associated Dean Research and Head of the Department. Had worked as PI and Co-PI for more than 8 sponsored projects from DST, AR&DB, GTRE, ICMR, DBT, BRNS and Faurecia Clean Mobility. Sponsored projects were aimed at development and studies on coatings for various applications like biomaterials, energy and sensors. Have conducted several corporate trainings on Selection of Materials and Manufacturing for Automotive and Aerospace Industries. Have supervised more than 30 PG students on material and manufacturing solutions for automotive and aerospace applications and 2 Ph.D. Scholars.Dr Suresh R is Professor in the Department of Mechanical and Manufacturing Engineering, MS Ramaiah University of Applied Sciences, Bangalore, India. His passion for research runs deep into areas such as the processing of hard and refractory materials, traditional and non-traditional machining, surface Engineering, metal matrix composites, Joining Process, Additive Manufacturing and robotics and automation system. He has organized several national and international conferences and workshops in the field of material science and manufacturing. He has authored more than 150 peer reviewed international journals papers and received research grants from AICTE, DST and KCTU, GoK. He received “Outstanding Scientist Award” from the Centre for advanced Research and Design Chennai in 2015 and ‘’Annual Exemplary Faculty-Research 2020’’ Award from RUAS in 2020. He is an official reviewer of original research articles in the field of materials and manufacturing. He is also a member of MISTE, SAE India and other Professional Societies, and is an active cons

• 1. Development of a Nanocrystalline Cellulose-Based Film to Combat the Staining Potential of Silver Diamine Fluoride 2. Papilla Reconstruction with Titanium-Prepared Platelet-Rich Fibrin: A Case Report and Literature Review 3. Evaluation of Platelet Rich Fibrin with Biodentine in Direct Pulp Therapy of Permanent Teeth — An in Vivo Study Arbiya Anjum, Swaroop Hegde, Rhea S. Mathew, Shruthika Mahajan and Shruthi Nagaraja 4. Formulation and Characterization of a Novel Drug Loaded Nano-Sponge for Vital Pulp Therapy 5. Comparison of the Retentive Properties of a Removable Partial Denture Clasp Fabricated by 3-D Printing and Laser Sintering — An In-Vitro Study 6. Characterization of a Novel Drug Delivery System to Enhance Regeneration in Endodontics 7. Effect of Surface Characteristics on Streptococcus Mutans Adhesion on Nickel Titanium (Niti) and Coaxial Stainless Steel Archwires—A Comparative Prospective Clinical Study 8. Evaluation of Cynodon Dactylon Gel as an Avulsion Medium: An In Vitro Study 9. Evaluation of Antimicrobial Effect of Osteopontin against Caries Causing Bacteria 10. In-Vitro Anti-Bacterial Effect of Lyophilized Umbilical Cord Blood Platelet Rich Plasma against Streptococcus Mutans 11. Modified Endodontic Bioceramic Sealer Comprising Gold Nanoparticles and PNIPAAm for Enhanced Antibacterial Ability against Enterococcus Faecalis 12. Bioactive Botanicals: Evaluating Cynodon dactylon’s Antioxidant Role in Intracanal Treatment 13. Gas Chromatography Analysis of Bioactive Compounds from Sargassum Wightii Extract for Periodontal Therapy 14. Insilico Analysis of Compounds Isolated from Mulberry Plant Source for Anti Cariogenicity 15. Comparative Evaluation of Anti-microbial Efficacy of Ocimum Sanctum (Tulsi) extract, Ocimum Sanctum with Silver Nanoparticles and 0.12% Chlorhexidine: An Invitro Study 16. Demineralized Tooth as Bone Graft Material: A Systematic Review 17. Assessment of Proliferative Effect of Human Adult Peripheral and Umbilical Cord Blood Platelet-Rich Fibrin Enhanced with Gold Nanoparticles on Human Dental Pulp Stem Cells: An In-Vitro Study 18. “Knocking on Nature’s Door”—An in Vitro Validation of the Anti-Inflammatory, Anti-Microbial Efficacy of Convolvulus Pluricaulis 19. Formulation and Assessment of Cytotoxicity of Mg-Cu Alloy in Combination with Xenogenic Bone Graft—An In-Vitro Study 20. A Novel Formulation of Collagen and Albumin-Based Nanoparticles: Optimization of the Methodology and in Vitro Validation 21. Bridging the Gap Between Phytopharmaceuticals and Periodontology: Coleus Amboinicus as a Potential Topical Treatment Modality 22. Lemongrass oil Infused Dental Wafers: A Natural Shield against Oral Pathogens 23. Comparative 3D Finite Element Analysis of Stress Distribution and Displacement Patterns in Craniofacial Structures Using Hyrax and Memorax Maxillary Expansion Appliances 24. SPT based Liquefaction Prediction of Soils Employing AI Techniques 25. Thermal Stability of the Magnetic Tunnel Junction Stack and their Magnetic Properties 26. Comparative Study of Synthesis Methods of All Inorganic Lead-Free Bromide Perovskite 27. Optimization for Soft Magnetic Properties of [NiFe/Ta]n Multilayer for Magnetic Flux Concentrator 28. Finite Element Analysis of CNC Dry Machining for Alloy Workpiece using Ansys Workbench 29. Efficient CO2 Capture: Activated Porous Carbon from D-Glucose with Non Corrosive Activating Agent 30. Urea-Formaldehyde Microcapsules for the Detection of Microcracks in Polymer Composites 31. Development of Linear Bipolar and Non-Hysteretic Spin Valve GMR Sensor 32. Prediction of Equivalent Plastic Strain in Cold Spray Process using Feedforward Artificial Neural Network 33. One-pot Hydrothermal Synthesis of Zinc Gallate Nanoparticles: A Study of the Structural, Optical, Morphological and Electrical Properties 34. Graphene Nanoplatelets Based Material for Energy Storage Applications 35. Biopolymer-Based Plant Extracts Mediated-Silver Nanoparticles as Antibacterial Dressing 36. Simulations of Impacts on AA2219-T87 Plates 37. Evaluation of Antimicrobial Property of Natural C-Dots 38. Release Mechanisms of Montelukast Sodium from Transdermal Films Based on Sodium Alginate and Lignosulphonic Acid 39. Magnetically Targeted Drug Delivery of Levodopa in Parkinson’s Disease using Magnetite Loaded Ligno-Alginate 40. Kraft Lignin-Based Nanocarrier for Improved Sorafenib Release in Hepatocellular Carcinoma Treatment 41. Microwave Absorption Characterization of NCQD-RGO Composites using Rectangular Waveguide for Stealth Applications 42. Enhancing Pest Control Sustainability: Ligno-Alginate Blend for Controlled Pyrethrin Release 43. An Static and Fatigue Study of Glass Fiber Reinforced Polymer using Carbon Nano Tubes

Dr. Srikari S is a Professor in Automotive and Aeronautical Engineering Department. Specialization in Ceramics and composites, coatings, biomaterials, selection of materials and manufacturing processes for aerospace, automotive applications. Working has Head of Bio-materials Research Center, previously worked has Associated Dean Research and Head of the Department. Had worked as PI and Co-PI for more than 8 sponsored projects from DST, AR&DB, GTRE, ICMR, DBT, BRNS and Faurecia Clean Mobility. Sponsored projects were aimed at development and studies on coatings for various applications like biomaterials, energy and sensors. Have conducted several corporate trainings on Selection of Materials and Manufacturing for Automotive and Aerospace Industries. Have supervised more than 30 PG students on material and manufacturing solutions for automotive and aerospace applications and 2 Ph.D. Scholars.Dr Suresh R is Professor in the Department of Mechanical and Manufacturing Engineering, MS Ramaiah University of Applied Sciences, Bangalore, India. His passion for research runs deep into areas such as the processing of hard and refractory materials, traditional and non-traditional machining, surface Engineering, metal matrix composites, Joining Process, Additive Manufacturing and robotics and automation system. He has organized several national and international conferences and workshops in the field of material science and manufacturing. He has authored more than 150 peer reviewed international journals papers and received research grants from AICTE, DST and KCTU, GoK. He received “Outstanding Scientist Award” from the Centre for advanced Research and Design Chennai in 2015 and ‘’Annual Exemplary Faculty-Research 2020’’ Award from RUAS in 2020. He is an official reviewer of original research articles in the field of materials and manufacturing. He is also a member of MISTE, SAE India and other Professional Societies, and is an active cons

• 1. Development of a Nanocrystalline Cellulose-Based Film to Combat the Staining Potential of Silver Diamine Fluoride 2. Papilla Reconstruction with Titanium-Prepared Platelet-Rich Fibrin: A Case Report and Literature Review 3. Evaluation of Platelet Rich Fibrin with Biodentine in Direct Pulp Therapy of Permanent Teeth — An in Vivo Study Arbiya Anjum, Swaroop Hegde, Rhea S. Mathew, Shruthika Mahajan and Shruthi Nagaraja 4. Formulation and Characterization of a Novel Drug Loaded Nano-Sponge for Vital Pulp Therapy 5. Comparison of the Retentive Properties of a Removable Partial Denture Clasp Fabricated by 3-D Printing and Laser Sintering — An In-Vitro Study 6. Characterization of a Novel Drug Delivery System to Enhance Regeneration in Endodontics 7. Effect of Surface Characteristics on Streptococcus Mutans Adhesion on Nickel Titanium (Niti) and Coaxial Stainless Steel Archwires—A Comparative Prospective Clinical Study 8. Evaluation of Cynodon Dactylon Gel as an Avulsion Medium: An In Vitro Study 9. Evaluation of Antimicrobial Effect of Osteopontin against Caries Causing Bacteria 10. In-Vitro Anti-Bacterial Effect of Lyophilized Umbilical Cord Blood Platelet Rich Plasma against Streptococcus Mutans 11. Modified Endodontic Bioceramic Sealer Comprising Gold Nanoparticles and PNIPAAm for Enhanced Antibacterial Ability against Enterococcus Faecalis 12. Bioactive Botanicals: Evaluating Cynodon dactylon’s Antioxidant Role in Intracanal Treatment 13. Gas Chromatography Analysis of Bioactive Compounds from Sargassum Wightii Extract for Periodontal Therapy 14. Insilico Analysis of Compounds Isolated from Mulberry Plant Source for Anti Cariogenicity 15. Comparative Evaluation of Anti-microbial Efficacy of Ocimum Sanctum (Tulsi) extract, Ocimum Sanctum with Silver Nanoparticles and 0.12% Chlorhexidine: An Invitro Study 16. Demineralized Tooth as Bone Graft Material: A Systematic Review 17. Assessment of Proliferative Effect of Human Adult Peripheral and Umbilical Cord Blood Platelet-Rich Fibrin Enhanced with Gold Nanoparticles on Human Dental Pulp Stem Cells: An In-Vitro Study 18. “Knocking on Nature’s Door”—An in Vitro Validation of the Anti-Inflammatory, Anti-Microbial Efficacy of Convolvulus Pluricaulis 19. Formulation and Assessment of Cytotoxicity of Mg-Cu Alloy in Combination with Xenogenic Bone Graft—An In-Vitro Study 20. A Novel Formulation of Collagen and Albumin-Based Nanoparticles: Optimization of the Methodology and in Vitro Validation 21. Bridging the Gap Between Phytopharmaceuticals and Periodontology: Coleus Amboinicus as a Potential Topical Treatment Modality 22. Lemongrass oil Infused Dental Wafers: A Natural Shield against Oral Pathogens 23. Comparative 3D Finite Element Analysis of Stress Distribution and Displacement Patterns in Craniofacial Structures Using Hyrax and Memorax Maxillary Expansion Appliances 24. SPT based Liquefaction Prediction of Soils Employing AI Techniques 25. Thermal Stability of the Magnetic Tunnel Junction Stack and their Magnetic Properties 26. Comparative Study of Synthesis Methods of All Inorganic Lead-Free Bromide Perovskite 27. Optimization for Soft Magnetic Properties of [NiFe/Ta]n Multilayer for Magnetic Flux Concentrator 28. Finite Element Analysis of CNC Dry Machining for Alloy Workpiece using Ansys Workbench 29. Efficient CO2 Capture: Activated Porous Carbon from D-Glucose with Non Corrosive Activating Agent 30. Urea-Formaldehyde Microcapsules for the Detection of Microcracks in Polymer Composites 31. Development of Linear Bipolar and Non-Hysteretic Spin Valve GMR Sensor 32. Prediction of Equivalent Plastic Strain in Cold Spray Process using Feedforward Artificial Neural Network 33. One-pot Hydrothermal Synthesis of Zinc Gallate Nanoparticles: A Study of the Structural, Optical, Morphological and Electrical Properties 34. Graphene Nanoplatelets Based Material for Energy Storage Applications 35. Biopolymer-Based Plant Extracts Mediated-Silver Nanoparticles as Antibacterial Dressing 36. Simulations of Impacts on AA2219-T87 Plates 37. Evaluation of Antimicrobial Property of Natural C-Dots 38. Release Mechanisms of Montelukast Sodium from Transdermal Films Based on Sodium Alginate and Lignosulphonic Acid 39. Magnetically Targeted Drug Delivery of Levodopa in Parkinson’s Disease using Magnetite Loaded Ligno-Alginate 40. Kraft Lignin-Based Nanocarrier for Improved Sorafenib Release in Hepatocellular Carcinoma Treatment 41. Microwave Absorption Characterization of NCQD-RGO Composites using Rectangular Waveguide for Stealth Applications 42. Enhancing Pest Control Sustainability: Ligno-Alginate Blend for Controlled Pyrethrin Release 43. An Static and Fatigue Study of Glass Fiber Reinforced Polymer using Carbon Nano Tubes