Mihails Kusnezoff is the editor of Advances in Solid Oxide Fuel Cells and Electronic Ceramics II, Volume 37, Issue 3, published by Wiley.Narottam P. Bansal is the editor of Advances in Solid Oxide Fuel Cells and Electronic Ceramics II, Volume 37, Issue 3, published by Wiley.Kiyoshi Shimamura is the editor of Advances in Solid Oxide Fuel Cells and Electronic Ceramics II, Volume 37, Issue 3, published by Wiley.

• Preface vii Introduction ixSOLID OXIDE FUEL CELLSDevelopment of SOFC Technology at Taiwan Institute of Nuclear Energy Research 3Ruey-Yi Lee, Yung-Neng Cheng, Tai-Nan Lin, Chang-Sing Hwang, Ning-Yih Hsu, Wen-Tang Hong, and Chien-Kuo LiuDevelopment of Plasma Sprayed Protective LSM Coating in INER 19Chun-Liang Chang, Chang-sing Hwang, Chun-Huang Tsai, Sheng-Fu Yang, Wei-Ja Shong, Te-Jung Daron Huang, and Ming-Hsiu WuProduction and Co-Sintering at 950°C of Planar Half Cells with CuO-GDC Cermet Supporting Anode and Li2O-Doped GDC Electrolyte 31V. De Marco, A. Grazioli, and V. M. SglavoSintering Properties of TiC-Ni-Mo Cermet Using Nanosized TiC Powders 39Jia Huey Kong, Zhezhen Fu, and Rasit KocElectrical and Mechanical Properties of Phlogopite Mica/BaO-Al2O3-B2O3-SiO2-Based Glass Sealants for Solid Oxide Fuel Cell 51Chien-Kuo Liu, Wei-Ja Shong, and Ruey-Yi LeeDirect Utilization of Ethanol in Solid Oxide Fuel Cells: Preparation and Characterization of CeO2-Al2O3 Based Anodes 61P. E. V. De Miranda, S. A. Venâncio, B. J. M. Sarruf, G. G. Gomes Jr, and N. MinhCorrosion Study of Ceria Protective Layer Deposited by Spray Pyrolysis on Steel Interconnects 79Dagmara Szymczewska, Sebastian Molin, Ming Chen, Piotr Jasi ski, and Peter Vang HendriksenSynthesis of Sr2MgMoO6 by Atmosphere-Controlled Calcination Method and Characterization for Solid Oxide Fuel Cells 87Masahiro Kinoshita, Kyota Hara, Tomohiro Onozawa, Kiyoto Shin-mura, Yu Otani, Seiya Ogawa, Eiki Niwa, Takuya Hashimoto, and Kazuya SasakiPhase Interaction and Distribution in Mixed Ionic Electronic Conducting Ceria-Spinel Composites 99M. Ramasamy, S. Baumann, A. Opitz, R. Iskandar, J. Mayer, D. Udomsilp, U. Breuer, and M. BramInterface-Matching for Barium Strontium Ferrate-Ceria by Drop-Coating Buffer Layer 113Y. M. Wang, T. C. Chen, and H. Y. ChangStability of Materials for Solid Oxide Fuel Cells with Ammonia Fuel 123H. Iwai, M. Saito, Y. Yamamoto, K. Inaoka, S. Suzuki, and Y. TakahashiInvestigation on the Phase Stability of Perovskite in La-Sr-Cr-Fe-O System 127Hooman Sabarou and Yu ZhongInvestigation on the Performance Testing Reliability by Introducing Current Collection Modification for the Solid Oxide Fuel Cell 137Ming-Wei Liao, Tai-Nan Lin, Jen-Chen Chang, Maw-Chwain Lee, Rung-Je Yang, Yang-Chuang Chang, Wei-Xin Kao, Lin-Song Lee, Ruey-Yi Lee, Hong-Yi Kuo, Chun-Yen Yeh, and Yu-Ming ChenCRYSTALLINE MATERIALS FOR ELECTRICAL, OPTICAL AND MEDICAL APPLICATIONSNaNbO3/PVDF Composite: A Flexible Functional Material 155G. F. Teixeira, R. A. Ciola, M. A. Zaghete, J. A. Varela, and E. LongoAuthor Index 165

Mihails Kusnezoff is the editor of Advances in Solid Oxide Fuel Cells and Electronic Ceramics II, Volume 37, Issue 3, published by Wiley.Narottam P. Bansal is the editor of Advances in Solid Oxide Fuel Cells and Electronic Ceramics II, Volume 37, Issue 3, published by Wiley.Kiyoshi Shimamura is the editor of Advances in Solid Oxide Fuel Cells and Electronic Ceramics II, Volume 37, Issue 3, published by Wiley.

• Preface vii Introduction ixSOLID OXIDE FUEL CELLSDevelopment of SOFC Technology at Taiwan Institute of Nuclear Energy Research 3Ruey-Yi Lee, Yung-Neng Cheng, Tai-Nan Lin, Chang-Sing Hwang, Ning-Yih Hsu, Wen-Tang Hong, and Chien-Kuo LiuDevelopment of Plasma Sprayed Protective LSM Coating in INER 19Chun-Liang Chang, Chang-sing Hwang, Chun-Huang Tsai, Sheng-Fu Yang, Wei-Ja Shong, Te-Jung Daron Huang, and Ming-Hsiu WuProduction and Co-Sintering at 950°C of Planar Half Cells with CuO-GDC Cermet Supporting Anode and Li2O-Doped GDC Electrolyte 31V. De Marco, A. Grazioli, and V. M. SglavoSintering Properties of TiC-Ni-Mo Cermet Using Nanosized TiC Powders 39Jia Huey Kong, Zhezhen Fu, and Rasit KocElectrical and Mechanical Properties of Phlogopite Mica/BaO-Al2O3-B2O3-SiO2-Based Glass Sealants for Solid Oxide Fuel Cell 51Chien-Kuo Liu, Wei-Ja Shong, and Ruey-Yi LeeDirect Utilization of Ethanol in Solid Oxide Fuel Cells: Preparation and Characterization of CeO2-Al2O3 Based Anodes 61P. E. V. De Miranda, S. A. Venâncio, B. J. M. Sarruf, G. G. Gomes Jr, and N. MinhCorrosion Study of Ceria Protective Layer Deposited by Spray Pyrolysis on Steel Interconnects 79Dagmara Szymczewska, Sebastian Molin, Ming Chen, Piotr Jasi ski, and Peter Vang HendriksenSynthesis of Sr2MgMoO6 by Atmosphere-Controlled Calcination Method and Characterization for Solid Oxide Fuel Cells 87Masahiro Kinoshita, Kyota Hara, Tomohiro Onozawa, Kiyoto Shin-mura, Yu Otani, Seiya Ogawa, Eiki Niwa, Takuya Hashimoto, and Kazuya SasakiPhase Interaction and Distribution in Mixed Ionic Electronic Conducting Ceria-Spinel Composites 99M. Ramasamy, S. Baumann, A. Opitz, R. Iskandar, J. Mayer, D. Udomsilp, U. Breuer, and M. BramInterface-Matching for Barium Strontium Ferrate-Ceria by Drop-Coating Buffer Layer 113Y. M. Wang, T. C. Chen, and H. Y. ChangStability of Materials for Solid Oxide Fuel Cells with Ammonia Fuel 123H. Iwai, M. Saito, Y. Yamamoto, K. Inaoka, S. Suzuki, and Y. TakahashiInvestigation on the Phase Stability of Perovskite in La-Sr-Cr-Fe-O System 127Hooman Sabarou and Yu ZhongInvestigation on the Performance Testing Reliability by Introducing Current Collection Modification for the Solid Oxide Fuel Cell 137Ming-Wei Liao, Tai-Nan Lin, Jen-Chen Chang, Maw-Chwain Lee, Rung-Je Yang, Yang-Chuang Chang, Wei-Xin Kao, Lin-Song Lee, Ruey-Yi Lee, Hong-Yi Kuo, Chun-Yen Yeh, and Yu-Ming ChenCRYSTALLINE MATERIALS FOR ELECTRICAL, OPTICAL AND MEDICAL APPLICATIONSNaNbO3/PVDF Composite: A Flexible Functional Material 155G. F. Teixeira, R. A. Ciola, M. A. Zaghete, J. A. Varela, and E. LongoAuthor Index 165

Mihails Kusnezoff is the editor of Advances in Solid Oxide Fuel Cells and Electronic Ceramics II, Volume 37, Issue 3, published by Wiley.Narottam P. Bansal is the editor of Advances in Solid Oxide Fuel Cells and Electronic Ceramics II, Volume 37, Issue 3, published by Wiley.Kiyoshi Shimamura is the editor of Advances in Solid Oxide Fuel Cells and Electronic Ceramics II, Volume 37, Issue 3, published by Wiley.

• Preface vii Introduction ixSOLID OXIDE FUEL CELLSDevelopment of SOFC Technology at Taiwan Institute of Nuclear Energy Research 3Ruey-Yi Lee, Yung-Neng Cheng, Tai-Nan Lin, Chang-Sing Hwang, Ning-Yih Hsu, Wen-Tang Hong, and Chien-Kuo LiuDevelopment of Plasma Sprayed Protective LSM Coating in INER 19Chun-Liang Chang, Chang-sing Hwang, Chun-Huang Tsai, Sheng-Fu Yang, Wei-Ja Shong, Te-Jung Daron Huang, and Ming-Hsiu WuProduction and Co-Sintering at 950°C of Planar Half Cells with CuO-GDC Cermet Supporting Anode and Li2O-Doped GDC Electrolyte 31V. De Marco, A. Grazioli, and V. M. SglavoSintering Properties of TiC-Ni-Mo Cermet Using Nanosized TiC Powders 39Jia Huey Kong, Zhezhen Fu, and Rasit KocElectrical and Mechanical Properties of Phlogopite Mica/BaO-Al2O3-B2O3-SiO2-Based Glass Sealants for Solid Oxide Fuel Cell 51Chien-Kuo Liu, Wei-Ja Shong, and Ruey-Yi LeeDirect Utilization of Ethanol in Solid Oxide Fuel Cells: Preparation and Characterization of CeO2-Al2O3 Based Anodes 61P. E. V. De Miranda, S. A. Venâncio, B. J. M. Sarruf, G. G. Gomes Jr, and N. MinhCorrosion Study of Ceria Protective Layer Deposited by Spray Pyrolysis on Steel Interconnects 79Dagmara Szymczewska, Sebastian Molin, Ming Chen, Piotr Jasi ski, and Peter Vang HendriksenSynthesis of Sr2MgMoO6 by Atmosphere-Controlled Calcination Method and Characterization for Solid Oxide Fuel Cells 87Masahiro Kinoshita, Kyota Hara, Tomohiro Onozawa, Kiyoto Shin-mura, Yu Otani, Seiya Ogawa, Eiki Niwa, Takuya Hashimoto, and Kazuya SasakiPhase Interaction and Distribution in Mixed Ionic Electronic Conducting Ceria-Spinel Composites 99M. Ramasamy, S. Baumann, A. Opitz, R. Iskandar, J. Mayer, D. Udomsilp, U. Breuer, and M. BramInterface-Matching for Barium Strontium Ferrate-Ceria by Drop-Coating Buffer Layer 113Y. M. Wang, T. C. Chen, and H. Y. ChangStability of Materials for Solid Oxide Fuel Cells with Ammonia Fuel 123H. Iwai, M. Saito, Y. Yamamoto, K. Inaoka, S. Suzuki, and Y. TakahashiInvestigation on the Phase Stability of Perovskite in La-Sr-Cr-Fe-O System 127Hooman Sabarou and Yu ZhongInvestigation on the Performance Testing Reliability by Introducing Current Collection Modification for the Solid Oxide Fuel Cell 137Ming-Wei Liao, Tai-Nan Lin, Jen-Chen Chang, Maw-Chwain Lee, Rung-Je Yang, Yang-Chuang Chang, Wei-Xin Kao, Lin-Song Lee, Ruey-Yi Lee, Hong-Yi Kuo, Chun-Yen Yeh, and Yu-Ming ChenCRYSTALLINE MATERIALS FOR ELECTRICAL, OPTICAL AND MEDICAL APPLICATIONSNaNbO3/PVDF Composite: A Flexible Functional Material 155G. F. Teixeira, R. A. Ciola, M. A. Zaghete, J. A. Varela, and E. LongoAuthor Index 165