The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents.

• Part 1: High Temperature Applications I.- Effect of Thermal Aging on the Corrosion and Mechanical Properties of Friction Stir Welded 250 Grade Maraging Steel.- Friction Stir Processing of 304L Stainless Steel for Crack Repair.- Influence of underwater operation on friction stir welding of medium carbon steel.- Feasibility of iridium containing nickel base superalloy tool to friction stir Spot welding of High Strength Steel.- Part 2: High Temperature Applications II.- Development of Friction Stir Processing for Repair of Nuclear Dry Cask Storage System Canisters.- Performance of tungsten-based alloy tool developed for friction stir welding of austenitic stainless steel.- Investigation of Process Parameters for Friction Stir Processing (FSP) of Ti-6Al-4V Alloy.- Part 3: Derivative Technologies.- Solid-State Joining of Thick-Section Dissimilar Materials using a New Friction Stir Dovetailing (FSD) Process.- Joining aerospace aluminum 2024-T4 to titanium by Friction Stir Extrusion.- Dissimilar Metal T-Joint Formed by Friction Stir Extrusion.- Part 4: Lightweight Applications.- Friction Stir Welding of Thick Section Aluminium Alloys - New Techniques.- Friction Stir Weld lap joint properties in aeronautic aluminum alloys.- Friction stir welding of thick aluminium welds – challenges and perspectives.- High-speed FSW aluminum alloy 7075 microstructure and corrosion properties.- Flow Features in Shoulder Zone during Scroll Tool Friction Stir Welding Thick 6061 Aluminum Plates.- Part 5: Dissimilar Applications.- Joining dissimilar material using Friction Stir scribe technique.- Influence of stir flow on joint quality during friction stir lap Al-to-Cu welding.- A Numerical Simulation for Dissimilar Aluminum Alloys Joined by Friction Stir Welding.- Realization of Ultrasound Enhanced Friction Stir Welded (USE-FSW) Al/Mg- and Al/Steel-Joints: Process and Robustness, Mechanical and Corrosive Properties.- Part 6: Industrial Applications.- Friction Stir Welding Parameter Developmentof AA7075 for Hot Stamping Applications.- A novel approach for joining EN AW 1050 stranded wire and EN CW 004A contact elements by Friction Stir Spot Bonding.- Joining Al 6061 to ZE41A Mg Alloy by Friction Stir Welding Using a Cold Spray Transition Joint.- Refill Friction Stir Spot Welding Aerospace Aluminum Alloys.- Part 7: Control and Simulation.- Depth and temperature control during friction stir welding of 5 cm thick copper canisters.- Predicting Lap Shear Strength for Friction Stir Scribe Joining of Dissimilar Materials.- Simultaneous Independent Control of Tool Axial Force and Temperature in Friction Stir Processing.- Process force reduction during robotic Friction Stir Welding of aluminium alloys with reduced tool aspect ratios.- Part 8: Poster Session.- Friction stir processing of 2507 super duplex stainless steel: microstructure and corrosion behavior.- Effect of Heat Treatment on Friction-stir-processed Nanodispersed AA7075 and 2024 Al Alloys.- Numerical Analysis of FSW Employing Discrete Element Method.

The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents.

• Part 1: High Temperature Applications I.- Effect of Thermal Aging on the Corrosion and Mechanical Properties of Friction Stir Welded 250 Grade Maraging Steel.- Friction Stir Processing of 304L Stainless Steel for Crack Repair.- Influence of underwater operation on friction stir welding of medium carbon steel.- Feasibility of iridium containing nickel base superalloy tool to friction stir Spot welding of High Strength Steel.- Part 2: High Temperature Applications II.- Development of Friction Stir Processing for Repair of Nuclear Dry Cask Storage System Canisters.- Performance of tungsten-based alloy tool developed for friction stir welding of austenitic stainless steel.- Investigation of Process Parameters for Friction Stir Processing (FSP) of Ti-6Al-4V Alloy.- Part 3: Derivative Technologies.- Solid-State Joining of Thick-Section Dissimilar Materials using a New Friction Stir Dovetailing (FSD) Process.- Joining aerospace aluminum 2024-T4 to titanium by Friction Stir Extrusion.- Dissimilar Metal T-Joint Formed by Friction Stir Extrusion.- Part 4: Lightweight Applications.- Friction Stir Welding of Thick Section Aluminium Alloys - New Techniques.- Friction Stir Weld lap joint properties in aeronautic aluminum alloys.- Friction stir welding of thick aluminium welds – challenges and perspectives.- High-speed FSW aluminum alloy 7075 microstructure and corrosion properties.- Flow Features in Shoulder Zone during Scroll Tool Friction Stir Welding Thick 6061 Aluminum Plates.- Part 5: Dissimilar Applications.- Joining dissimilar material using Friction Stir scribe technique.- Influence of stir flow on joint quality during friction stir lap Al-to-Cu welding.- A Numerical Simulation for Dissimilar Aluminum Alloys Joined by Friction Stir Welding.- Realization of Ultrasound Enhanced Friction Stir Welded (USE-FSW) Al/Mg- and Al/Steel-Joints: Process and Robustness, Mechanical and Corrosive Properties.- Part 6: Industrial Applications.- Friction Stir Welding Parameter Developmentof AA7075 for Hot Stamping Applications.- A novel approach for joining EN AW 1050 stranded wire and EN CW 004A contact elements by Friction Stir Spot Bonding.- Joining Al 6061 to ZE41A Mg Alloy by Friction Stir Welding Using a Cold Spray Transition Joint.- Refill Friction Stir Spot Welding Aerospace Aluminum Alloys.- Part 7: Control and Simulation.- Depth and temperature control during friction stir welding of 5 cm thick copper canisters.- Predicting Lap Shear Strength for Friction Stir Scribe Joining of Dissimilar Materials.- Simultaneous Independent Control of Tool Axial Force and Temperature in Friction Stir Processing.- Process force reduction during robotic Friction Stir Welding of aluminium alloys with reduced tool aspect ratios.- Part 8: Poster Session.- Friction stir processing of 2507 super duplex stainless steel: microstructure and corrosion behavior.- Effect of Heat Treatment on Friction-stir-processed Nanodispersed AA7075 and 2024 Al Alloys.- Numerical Analysis of FSW Employing Discrete Element Method.

The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents.

• Part 1: High Temperature Applications I.- Effect of Thermal Aging on the Corrosion and Mechanical Properties of Friction Stir Welded 250 Grade Maraging Steel.- Friction Stir Processing of 304L Stainless Steel for Crack Repair.- Influence of underwater operation on friction stir welding of medium carbon steel.- Feasibility of iridium containing nickel base superalloy tool to friction stir Spot welding of High Strength Steel.- Part 2: High Temperature Applications II.- Development of Friction Stir Processing for Repair of Nuclear Dry Cask Storage System Canisters.- Performance of tungsten-based alloy tool developed for friction stir welding of austenitic stainless steel.- Investigation of Process Parameters for Friction Stir Processing (FSP) of Ti-6Al-4V Alloy.- Part 3: Derivative Technologies.- Solid-State Joining of Thick-Section Dissimilar Materials using a New Friction Stir Dovetailing (FSD) Process.- Joining aerospace aluminum 2024-T4 to titanium by Friction Stir Extrusion.- Dissimilar Metal T-Joint Formed by Friction Stir Extrusion.- Part 4: Lightweight Applications.- Friction Stir Welding of Thick Section Aluminium Alloys - New Techniques.- Friction Stir Weld lap joint properties in aeronautic aluminum alloys.- Friction stir welding of thick aluminium welds – challenges and perspectives.- High-speed FSW aluminum alloy 7075 microstructure and corrosion properties.- Flow Features in Shoulder Zone during Scroll Tool Friction Stir Welding Thick 6061 Aluminum Plates.- Part 5: Dissimilar Applications.- Joining dissimilar material using Friction Stir scribe technique.- Influence of stir flow on joint quality during friction stir lap Al-to-Cu welding.- A Numerical Simulation for Dissimilar Aluminum Alloys Joined by Friction Stir Welding.- Realization of Ultrasound Enhanced Friction Stir Welded (USE-FSW) Al/Mg- and Al/Steel-Joints: Process and Robustness, Mechanical and Corrosive Properties.- Part 6: Industrial Applications.- Friction Stir Welding Parameter Developmentof AA7075 for Hot Stamping Applications.- A novel approach for joining EN AW 1050 stranded wire and EN CW 004A contact elements by Friction Stir Spot Bonding.- Joining Al 6061 to ZE41A Mg Alloy by Friction Stir Welding Using a Cold Spray Transition Joint.- Refill Friction Stir Spot Welding Aerospace Aluminum Alloys.- Part 7: Control and Simulation.- Depth and temperature control during friction stir welding of 5 cm thick copper canisters.- Predicting Lap Shear Strength for Friction Stir Scribe Joining of Dissimilar Materials.- Simultaneous Independent Control of Tool Axial Force and Temperature in Friction Stir Processing.- Process force reduction during robotic Friction Stir Welding of aluminium alloys with reduced tool aspect ratios.- Part 8: Poster Session.- Friction stir processing of 2507 super duplex stainless steel: microstructure and corrosion behavior.- Effect of Heat Treatment on Friction-stir-processed Nanodispersed AA7075 and 2024 Al Alloys.- Numerical Analysis of FSW Employing Discrete Element Method.