Andreas Öchsner is a Full Professor of Lightweight Design and Structural Simulation at Esslingen University of Applied Sciences, Germany. Having obtained a Dipl.-Ing. degree in Aeronautical Engineering at the University of Stuttgart (1997), Germany, he served as a research and teaching assistant at the University of Erlangen-Nuremberg from 1997 to 2003, while working to complete his Doctor of Engineering Sciences (Dr.-Ing.) degree. From 2003 to 2006, he was an Assistant Professor at the Department of Mechanical Engineering and Head of the Cellular Metals Group affiliated with the University of Aveiro, Portugal. He spent seven years (2007–2013) as a Full Professor at the Department of Applied Mechanics, Technical University of Malaysia, where he was also Head of the Advanced Materials and Structure Lab. From 2014 to 2017, he was a Full Professor at the School of Engineering, Griffith University, Australia, and Leader of the Mechanical Engineering Program (Head of Discipline and Program Director).Dr. Juan Alfonso Beltrán Fernández, is a graduate of the Escuela Superior de Ingeniería Mecánica y Eléctrica, ESIME of the National Polytechnic Institute in 1999 and researcher, who is currently part of the National System of Researchers. He has introduced important achievements in the health sector, with the specialist surgerist of the Hospital ISSSTE, IMSS, Hospital Humberto Díaz Lombardo, the Center for Research and Laboratory of Biomechanics (CILAB), considering areas of the spine, reconstructive or aesthetic maxillofacial surgery and recently in cranioplasties with specific grafts of specific areas with trauma. In particular, it highlights the work of counseling, consulting, traditional manufacturing, computerized and additive (3D), design and adaptation with composite and biocompatible materials in patients with terminal cancer and trauma and consulting work for the private sector. He received in 2010 the award: ENGINEERING AWARD 2010 - ICYTDF in the category of TESIS WORK OR TERMINAL PROJECT WHOSE CONTRIBUTION TO ENGINEERING IS BENEFIT OF THE CITY OR COUNTRY, for its contributions to the development of research and engineering applied for the benefit of society, in particular with relevance in Biomechanics and prosthetics suitable to the Mexican phenotype.

• Biomechanical Evaluation of Sharped Fractures in Human Jaws Using Plates.- Articulated by the Champy Method.- Numerical Simulation of Cranial Distractor Components Using Passive and Generative Design.- Comparative Study of Stress and Strain of Orthopaedic Implants for the Hip with Photoelastic and Image Correlation Techniques.- Design of an Auxiliary Mechanical System for the Diagnosis of Lordosis and Scoliosis.- Comparative Study of Interferometry and Finite Element Analysis in Maxillofacial.- Applications (Hemimandibulectomy Type IVc).- Experimental and Numerical Evaluation of an Orthognathic Implant with Facial.- Asymmetry and Skeletal Class III .- Numerical - Experimental Study for the Determination of the Structural Mechanical.- Behavior of the Wall of the Cranial Vault Using Finite Element Method and Image Correlation.- Tridimnesional Design And Printing Techniques to Obtain Personalized Prosthetic.- Components for Specific Cases Involving Bone Defects.- Numerical-Experimental Study of 3D Printed Ortheses for Rehabilitation of Patients with Musculoskeletal Lesions.

Andreas Öchsner is a Full Professor of Lightweight Design and Structural Simulation at Esslingen University of Applied Sciences, Germany. Having obtained a Dipl.-Ing. degree in Aeronautical Engineering at the University of Stuttgart (1997), Germany, he served as a research and teaching assistant at the University of Erlangen-Nuremberg from 1997 to 2003, while working to complete his Doctor of Engineering Sciences (Dr.-Ing.) degree. From 2003 to 2006, he was an Assistant Professor at the Department of Mechanical Engineering and Head of the Cellular Metals Group affiliated with the University of Aveiro, Portugal. He spent seven years (2007–2013) as a Full Professor at the Department of Applied Mechanics, Technical University of Malaysia, where he was also Head of the Advanced Materials and Structure Lab. From 2014 to 2017, he was a Full Professor at the School of Engineering, Griffith University, Australia, and Leader of the Mechanical Engineering Program (Head of Discipline and Program Director).Dr. Juan Alfonso Beltrán Fernández, is a graduate of the Escuela Superior de Ingeniería Mecánica y Eléctrica, ESIME of the National Polytechnic Institute in 1999 and researcher, who is currently part of the National System of Researchers. He has introduced important achievements in the health sector, with the specialist surgerist of the Hospital ISSSTE, IMSS, Hospital Humberto Díaz Lombardo, the Center for Research and Laboratory of Biomechanics (CILAB), considering areas of the spine, reconstructive or aesthetic maxillofacial surgery and recently in cranioplasties with specific grafts of specific areas with trauma. In particular, it highlights the work of counseling, consulting, traditional manufacturing, computerized and additive (3D), design and adaptation with composite and biocompatible materials in patients with terminal cancer and trauma and consulting work for the private sector. He received in 2010 the award: ENGINEERING AWARD 2010 - ICYTDF in the category of TESIS WORK OR TERMINAL PROJECT WHOSE CONTRIBUTION TO ENGINEERING IS BENEFIT OF THE CITY OR COUNTRY, for its contributions to the development of research and engineering applied for the benefit of society, in particular with relevance in Biomechanics and prosthetics suitable to the Mexican phenotype.

• Biomechanical Evaluation of Sharped Fractures in Human Jaws Using Plates.- Articulated by the Champy Method.- Numerical Simulation of Cranial Distractor Components Using Passive and Generative Design.- Comparative Study of Stress and Strain of Orthopaedic Implants for the Hip with Photoelastic and Image Correlation Techniques.- Design of an Auxiliary Mechanical System for the Diagnosis of Lordosis and Scoliosis.- Comparative Study of Interferometry and Finite Element Analysis in Maxillofacial.- Applications (Hemimandibulectomy Type IVc).- Experimental and Numerical Evaluation of an Orthognathic Implant with Facial.- Asymmetry and Skeletal Class III .- Numerical - Experimental Study for the Determination of the Structural Mechanical.- Behavior of the Wall of the Cranial Vault Using Finite Element Method and Image Correlation.- Tridimnesional Design And Printing Techniques to Obtain Personalized Prosthetic.- Components for Specific Cases Involving Bone Defects.- Numerical-Experimental Study of 3D Printed Ortheses for Rehabilitation of Patients with Musculoskeletal Lesions.

Andreas Öchsner is a Full Professor of Lightweight Design and Structural Simulation at Esslingen University of Applied Sciences, Germany. Having obtained a Dipl.-Ing. degree in Aeronautical Engineering at the University of Stuttgart (1997), Germany, he served as a research and teaching assistant at the University of Erlangen-Nuremberg from 1997 to 2003, while working to complete his Doctor of Engineering Sciences (Dr.-Ing.) degree. From 2003 to 2006, he was an Assistant Professor at the Department of Mechanical Engineering and Head of the Cellular Metals Group affiliated with the University of Aveiro, Portugal. He spent seven years (2007–2013) as a Full Professor at the Department of Applied Mechanics, Technical University of Malaysia, where he was also Head of the Advanced Materials and Structure Lab. From 2014 to 2017, he was a Full Professor at the School of Engineering, Griffith University, Australia, and Leader of the Mechanical Engineering Program (Head of Discipline and Program Director).Dr. Juan Alfonso Beltrán Fernández, is a graduate of the Escuela Superior de Ingeniería Mecánica y Eléctrica, ESIME of the National Polytechnic Institute in 1999 and researcher, who is currently part of the National System of Researchers. He has introduced important achievements in the health sector, with the specialist surgerist of the Hospital ISSSTE, IMSS, Hospital Humberto Díaz Lombardo, the Center for Research and Laboratory of Biomechanics (CILAB), considering areas of the spine, reconstructive or aesthetic maxillofacial surgery and recently in cranioplasties with specific grafts of specific areas with trauma. In particular, it highlights the work of counseling, consulting, traditional manufacturing, computerized and additive (3D), design and adaptation with composite and biocompatible materials in patients with terminal cancer and trauma and consulting work for the private sector. He received in 2010 the award: ENGINEERING AWARD 2010 - ICYTDF in the category of TESIS WORK OR TERMINAL PROJECT WHOSE CONTRIBUTION TO ENGINEERING IS BENEFIT OF THE CITY OR COUNTRY, for its contributions to the development of research and engineering applied for the benefit of society, in particular with relevance in Biomechanics and prosthetics suitable to the Mexican phenotype.

• Biomechanical Evaluation of Sharped Fractures in Human Jaws Using Plates.- Articulated by the Champy Method.- Numerical Simulation of Cranial Distractor Components Using Passive and Generative Design.- Comparative Study of Stress and Strain of Orthopaedic Implants for the Hip with Photoelastic and Image Correlation Techniques.- Design of an Auxiliary Mechanical System for the Diagnosis of Lordosis and Scoliosis.- Comparative Study of Interferometry and Finite Element Analysis in Maxillofacial.- Applications (Hemimandibulectomy Type IVc).- Experimental and Numerical Evaluation of an Orthognathic Implant with Facial.- Asymmetry and Skeletal Class III .- Numerical - Experimental Study for the Determination of the Structural Mechanical.- Behavior of the Wall of the Cranial Vault Using Finite Element Method and Image Correlation.- Tridimnesional Design And Printing Techniques to Obtain Personalized Prosthetic.- Components for Specific Cases Involving Bone Defects.- Numerical-Experimental Study of 3D Printed Ortheses for Rehabilitation of Patients with Musculoskeletal Lesions.