Biomedicinsk teknik

"VÄRDEFULLA PERSPEKTIV PÅ HÖFTLEDSOPERATIONER" Läkartidningen 2021

Vad innebär en höftprotesoperation, hur kan man förbereda sig på bästa sätt och hur ser rehabiliteringen ut efteråt?

Vi sökte svaret på den frågan för sent, efter att John opererats och drabbats av komplikationer. Att vara välinformerad för att kunna vara delaktig i sin egen vård är viktigt och kunskap ger trygghet. Därav denna bok. Som läsare får du följa John genom hans operation och rehabilitering samtidigt som du får ta del av råd och fakta – före, under och efter en höftledsoperation som görs på grund av artros. Du får även läsa om Anders Jelander som sprungit 75 maraton med sina nya höftleder och om Maria Ahlberg, en alldeles ”vanlig” höftprotespatient.

Din nya höftled vänder sig till dig som lever med artrossmärta och inväntar operation, men också till dig som fått en ny höftprotes och söker mer information. Boken kan med fördel även läsas av anhöriga eller vårdpersonal som vill ha inblick i patientperspektivet. Boken är faktagranskad av Olof Sköldenberg, Professor i Ortopedi.

Sagt om boken: 

"Boken tillför ett värdefullt perspektiv som inte alltid förmedlas via sjukvården och ger läsaren en mer nyanserad bild av vad en höftprotesoperation innebär och medför, både ur positiv och ur negativ synvinkel. Även om texten huvudsakligen handlar om en person är den tillräckligt bred för att de flesta läsare ska kunna känna igen sig. Boken »Din nya höftled« har alla förutsättningar att fylla ett behov av nyanserad och saklig information ur ett patient- och närståendeperspektiv på höftprotesoperation.” Pelle Gustafson, docent och medicinsk redaktör, Läkartidningen 2021

”Detta är den första boken som tar ett samlat grepp om vad höftledsartros är, hur den utvecklas och behandlas, när det är dags för operation och vad efterföljande rehabilitering innebär. Om den här boken hade funnits då jag sköt på operationen på grund av rädsla hade jag blivit modigare och vågat ta steget till höftledsbyte mycket snabbare.” Gunvor Maazon, bibliotekarie och ”dubbelhippie” sedan nov 2019

”Mycket bra och välskriven bok som alla med höftledartros kan ha stor glädje av.” Per Wickman, höftledsopererad och patientföreträdare i NAG (nationell arbetsgrupp) för höftledsartros

”Boken innehåller viktiga fakta och högst läsvärda personliga berättelser, för alla med artros som vill bli opererade eller som har gjort en höftledsoperation.” Lotta Frithiof, journalist och nyopererad höftprotespatient

Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product.

Filled with high-quality photographs and illustrations, including some in color, this definitive guide details the design and manufacturing of artificial tactile systems and their applications in surgical procedures. Artificial Tactile Sensing in Biomedical Engineering explains the fundamentals of the human sense of touch and the latest techniques for artificially replicating it. The book describes the mechanistic principles of static and dynamic tactile sensors and discusses cutting-edge biomedical applications, including minimally invasive surgery, tumor detection, robotic surgery, and surgical simulations.

Artificial Tactile Sensing in Biomedical Engineering covers:

Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product.

Cutting-edge coverage of mechatronics in medical systems

Mechatronics in Medicine: A Biomedical Engineering Approach describes novel solutions for utilizing mechatronics to design innovative, accurate, and intelligent medical devices and optimize conventional medical instruments. After an introduction to mechatronics, the book addresses sensing technologies, actuators and feedback sensors, mechanisms and mechanical devices, and processing and control systems. Artificial intelligence, expert systems, and medical imaging are also covered. This pioneering guide concludes by discussing applications of mechatronics in medicine and biomedical engineering and presenting seven real-world medical case studies.

In-depth details on:

Bioceramics 10 contains the proceedings of the 10th International Symposium on Ceramics in Medicine, held in Paris, France, in October 1997. These annual symposia bring together distinguished researchers in the fields of ceramics and medicine to exchange ideas and to discuss recent research results.

Bioceramics in medicine has become one of the more important fields of biomaterials. The clinical applications of bioceramics are numerous. In particular in areas such as orthopaedic surgery, dentistry and plastic surgery, but also E.N.T., percutaneous devices and embolisation materials. In addition to the many clinical applications, Bioceramics 10 deals with a range of fundamental subjects in depth.

This book will be an essential reference tool for both clinicians, academics and industrial researchers interested in the use of ceramics in medicine. The book will also be of great value to students and lecturers in materials science, biomedical engineering and orthopaedics. This volume contains 140 papers, more than 200 high quality photographs, and both author and keyword indexes.

The materials industry has sought to observe and appreciate the relationship between structure, properties and function of these biological materials. A multidisciplinary approach, building on recent advances at the forefront of physics, chemistry and molecular biology, has been successful in producing many synthetic structures with interesting and useful properties.

Structural Biological Materials: Design and Structure-Property Relationships represents an invaluable reference in the field of biological materials science and provides an incisive view into this rapidly developing and increasingly important topic within materials science.

This book focuses on the study of three sub-groups of structural biological materials:

. Hard tissue engineering, focussing on cortical bone. Soft tissue engineering. Fibrous materials, particularly engineering with silk fibers.

The fundamental relationship between structure and properties, and certain aspects of design and engineering, are explored in each of the sub-groups. The importance of these materials, both in their intrinsic properties and specific functions, are illustrated with relevant examples. These depict the successful integration of material properties, architecture and shape, providing a wide range of optimised designs, tailored to specific functions.

Edited by Manuel Elices of the Universidad Politécnica de Madrid, Spain, this book is Volume 4 in the Pergamon Material Series.

Modelling and Control in Biomedical Systems (including Biological Systems) was held in Reims, France, 20-22 August 2006. This Symposium was organised by the University of Reims Champagne Ardenne and the Soci�t� de l'Electricit�, de l'Electronique et des TIC (SEE).

The Symposium attracted practitioners in engineering, information technology, mathematics, medicine and biology, and other related disciplines, with authors from 24 countries. Besides the abstracts of the four plenary lectures, this volume contains the 92 papers that were presented by their authors at the Symposium.

The papers included two invited keynote presentations given by internationally prominent and well-recognised research leaders: Claudio Cobelli, whose talk is titled "Dynamic modelling in diabetes: from whole body to genes"; and Irving J. Bigio, whose talk is titled "Elastic scattering spectroscopy for non-invasive detection of cancer". Two prestigious industrial speakers were also invited to give keynote presentations: Terry O'Brien from LIDCO, whose talk is titled "LIDCO: From the laboratory to protocolized goal directed therapy"; and Lorenzo Quinzio of Philips, whose talk is titled "Clinical decision support in monitoring and information systems".

Most books discuss general and broad topics regarding molecular imagings. However, Ultrasmall Lanthanide Oxide Nanoparticles for Biomedical Imaging and Therapy, will mainly focus on lanthanide oxide nanoparticles for molecular imaging and therapeutics. Multi-modal imaging capabilities will discussed, along with up-converting FI by using lanthanide oxide nanoparticles. The synthesis will cover polyol synthesis of lanthanide oxide nanoparticles, Surface coatings with biocompatible and hydrophilic ligands will be discussed and TEM images and dynamic light scattering (DLS) patterns will be provided. Various techniques which are generally used in analyzing the synthesized surface coated nanoparticles will be explored and this section will also cover FT­, IR analysis, XRD analysis, SQUID analysis, cytotoxicity measurements and proton relaxivity measurements. In vivo MR images, CT images, fluorescence images will be provided and Therapeutic application of gadolinium oxide nanoparticles will be discussed. Finally, future perpectives will be discussed. That is, present status and future works needed for clinical applications of lanthanide oxide nanoparticles to molecular imagings will be discussed.

Medical Biosensors for Point of Care (POC) Applications discusses advances in this important and emerging field which has the potential to transform patient diagnosis and care. Part 1 covers the fundamentals of medical biosensors for point-of-care applications. Chapters in part 2 go on to look at materials and fabrication of medical biosensors while the next part looks at different technologies and operational techniques. The final set of chapters provide an overview of the current applications of this technology.

Traditionally medical diagnostics have been dependent on sophisticated technologies which only trained professionals were able to operate. Recent research has focused on creating point-of-care diagnostic tools. These biosensors are miniaturised, portable, and are designed to be used at the point-of-care by untrained individuals, providing real-time and remote health monitoring.

Bioengineering is the application of engineering principles to address challenges in the fields of biology and medicine encompassing the principles of engineering design to the full spectrum of living systems. In surgery, recent advances in minimal invasive surgery and robotics are the culmination of the work that both engineers and surgeons have achieved in the medical field through an exciting and challenging interface. This interface rests on the medical curiosity and engineering solutions that lead eventually to collaboration and development of new ideas and technologies. Most recently, innovation by surgeons has become a fundamental contribution to medical research in the surgical field, and it is through effective communication between surgeons and biomedical engineers and promoting collaborative initiatives that translational research is possible. Bioengineering for Surgery explores this interface between surgeons and engineers and how it leads to innovation processes, providing clinical results, fundraising and prestige for the academic institution. This book is designed to teach students how engineers can fit in with their intended environment and what type of materials and design considerations must be taken into account in regards to medical ideas.

Biomaterials and Regenerative Medicine in Ophthalmology, Second Edition, focuses on an aging population and the increasing instances of eye diseases. Biomaterials continue to be used for numerous medical devices for the restoration of eyesight, improving many patients' quality of life. Consequently, biomaterials and regenerative medicine are becoming increasingly important to the advances of ophthalmology and optometry. This book provides readers with an updated and expanded look at the present status and future direction of biomaterials and regenerative medicine in this important field.

Extracellular Matrix-Derived Implants in Clinical Medicine comprehensively covers the emergence of tissue engineering and regenerative medicine over the past few decades, along with discussions of continuous funding and research.

The book provides a state-of-the-art review of this increasingly important technology and how it is translating from bench to bedside. Part One of the book looks at the historical use of human and animal tissues, focusing on the main application areas, including cardiovascular, hard and soft tissue engineering, and neurological, while Part Two examines the challenges in harvesting, processing, and manufacturing of extracellular matrices, with a final section reviewing the international regulatory environment and economics of tissue-based products.

Nanofiber Composite Materials for Biomedical Applications presents new developments and recent advances in nanofiber-reinforced composite materials and their use in biomedical applications, including biomaterial developments, drug delivery, tissue engineering, and regenerative medicine.

Unlike more conventional titles on composite materials, this book covers the most innovative new developments in nanofiber-based composites, including polymers, ceramics, and metals, with particular emphasis on their preparation and characterization methodology.

Selected case studies illustrate new developments in clinical and preclinical use, making the information critical for the development of new medical materials and systems for use in human health care, and for the exploration of new design spaces based on these nanofibers. This book is essential reading for those working in biomedical science and engineering, materials science, nanoscience, biomedical nanotechnology, and biotechnology.

Chitosan Based Biomaterials: Tissue Engineering and Therapeutics, Volume 2, provides the latest information on chitosan, a natural polymer derived from the marine material chitin. Chitosan displays unique properties, most notably biocompatibility and biodegradability. It can also be easily tuned to modify its structure or properties, making chitosan an excellent candidate as a biomaterial. Consequently, chitosan is being developed for many biomedical functions, ranging from tissue engineering and implant coatings to drug and gene delivery. This book provides readers with a full coverage of the applications of chitosan-based biomaterials.

Chitosan Based Biomaterials: Fundamentals, Volume 1, provides the latest information on chitosan, a natural polymer derived from the marine material chitin. Chitosan displays unique properties, most notably biocompatibility and biodegradability. It can also be easily tuned to modify its structure or properties, making chitosan an excellent candidate as a biomaterial. Consequently, chitosan is being developed for many biomedical functions, ranging from tissue engineering and implant coatings to drug and gene delivery. This book looks at the fundamentals of chitosan-based biomaterials.

Bioresorbable Polymers for Biomedical Applications: From Fundamentals to Translational Medicine provides readers with an overview of bioresorbable polymeric materials in the biomedical field. A useful resource for materials scientists in industry and academia, offering information on the fundamentals and considerations, synthesis and processing, and the clinical and R and D applications of bioresorbable polymers for biomedical applications.

Mechanical Testing of Orthopaedic Implants provides readers with a thorough overview of the fundamentals of orthopedic implants and various methods of mechanical testing. Historical aspects are presented, along with case studies that are particularly useful for readers.

Bone Response to Dental Implant Materials examines the oral environment and the challenges associated with dental biomaterials. Understanding different in vivo and in vitro responses is essential for engineers to successfully design and tailor implant materials which will withstand the different challenges of this unique environment. This comprehensive book reviews the fundamentals of bone responses in a variety of implant materials and presents strategies to tailor and control them.

Medical Devices and Regulations: Standards and Practices will shed light on the importance of regulations and standards among all stakeholders, bioengineering designers, biomaterial scientists and researchers to enable development of future medical devices.

Based on the authors' practical experience, this book provides a concise, practical guide on key issues and processes in developing new medical devices to meet international regulatory requirements and standards.

Science and Principles of Biodegradable and Bioresorbable Medical Polymers: Materials and Properties provides a practical guide to the use of biodegradable and bioresorbable polymers for study, research, and applications within medicine. Fundamentals of the basic principles and science behind the use of biodegradable polymers in advanced research and in medical and pharmaceutical applications are presented, as are important new concepts and principles covering materials, properties, and computer modeling, providing the reader with useful tools that will aid their own research, product design, and development.

Supported by practical application examples, the scope and contents of the book provide researchers with an important reference and knowledge-based educational and training aid on the basics and fundamentals of these important medical polymers.

Biofilms and Implantable Medical Devices: Infection and Control explores the increasing use of permanent and semi-permanent implants and indwelling medical devices. As an understanding of the growth and impact of biofilm formation on these medical devices and biomaterials is vital for protecting the health of the human host, this book provides readers with a comprehensive treatise on biofilms and their relationship with medical devices, also reporting on infections and associated strategies for prevention.