Gert Heinrich graduated from the University in Jena (Germany) in quantum physics in 1973. At the Technical University (TH) Leuna-Merseburg, he finished his doctorate in 1978 in polymer network physics and his Habilitation in 1986 about theory of polymer networks and topological constraints. In 1990 he received a position at the tire manufacturer Continental in Hanover (Germany) as senior research scientist and head of Materials Research. Heinrich continued his academic activities as lecturer at Universities of Hanover and Halle/Wittenberg. In 2002, he was appointed as full professor for “Polymer Materials and Rubber Technology” at the Technical University Dresden and as director of the Institute of Polymer Materials at the Leibniz Institute of Polymer Research Dresden e. V. (IPF). Since 2017 he is Senior Professor. His work has been recognized by several grants and awards, e.g. the George Stafford Whitby Award for distinguished teaching and research from theRubber Division of the ACS, the Colwyn Medal in UK for outstanding services to the rubber industry; the Carl Dietrich Harries Medal from the German Rubber Society, and the Lifetime Achievement Award from Tire Technology International Magazine. Science ranking (Google Scholar) indicates:  h-Index = 69;  i10-Index = 363 (19-01-2021).Reinhold Kipscholl graduated as Dipl.-Ing. in engineering of data processing and electronics. He is active since more than 20 years in leading industrial positions, especially in the field of testing and characterization of materials with respect of their physical behavior. Since 20 years he is General Manager of Coesfeld GmbH & Co. KG (Dortmund), a German Company developing and producing material testing equipment for plastics and elastomers. Since 2012 R. Kipscholl is founder and General Manager of PRL Polymer Research Lab., a Czech Company researching and developing new testing methods for characterizationof fracture and wear behavior of rubbers. He has been awarded with the 2018 Fernley H. Bunbury Award (Rubber Division, American Chemical Society). Scopus indicates 10 publications.Radek Stoček obtained his diploma degree as an engineer in 2005 from the Czech Technical University in Prague and received his Ph.D. in engineering science in 2012 from the Technical University Chemnitz (Germany), working with M. Gehde and parallel with G. Heinrich at IPF Dresden (G). Then he started an industrial career at Polymer Research Lab (PRL), Zlin, Czech Republic, and parallel an independent academic career at the Tomas Bata University (TBU) in Zlin. He finished his Habilitation in 2019. Currently he is holding the two positions as Head of R&D at PRL and Head of the Rubber Department at TBU. His research and scientific interests are focused on characterization of rubber material properties with respect to fatigue and fracture mechanics and on the development of new and advanced testing methodologies, hardware and equipments. One main goal is to optimize industrial rubber products in terms of performance and durability as well as to fasten development cycles and minimizing extensive real rubber product tests before production. His work has been recognized by awards from The Tire Society (USA). R. Stocek is author of 30 publications (according to Scopus) and holds two Utility Models.

• Some Revisions of Fatigue Crack Growth Characteristics of Rubber.- Determining Parametrical Functions Defining the Deformations of a Plane Strain Tensile Rubber Sample.- The effect of polyglycols on the fatigue crack growth of silica filled natural rubber.- The Fatigue Threshold of Rubber and Its Characterization Using the Cutting Method.- Critical Plane Analysis of Rubber.- Cavitation Micro-mechanisms in Silica-Filled Styrene-Butadiene Rubber Upon Fatigue and Cyclic Tensile Testing.- New Approaches to Modeling Failure and Fracture of Rubberlike Materials.- Influence of Filler Induced Cracks on the Statistical Lifetime of Rubber: A Review.- Fatigue Life Analysis of Solid Elastomer-Like Polyurethane.- Cavitation in Rubber Vulcanizates Subjected to Constrained Tensile Deformation.- Fatigue Crack Growth vs. Chip and Cut Wear of NR and NR/SBR Blend-Based Rubber Compounds.- Review on the Role of Phase Morphology and Energy Dissipation Around the Crack Tip During Fatigue Crack Propagation ofFiller-Reinforced Elastomer Blends.- Methodology Used for Characterizing the Fracture and Fatigue Behavior of Thermoplastic Elastomers.- About the influence of materials parameters on the ultimate and fatigue properties of elastomers.- Influence of Plasticizers Basing on Renewable Sources on the Deformation and Fracture Behaviour of Elastomers.- Fracture and Fatigue Failure Simulation of Polymeric Material at Finite Deformation by the Phase-Field Method and the Material Force Approach.- Viscoelastic Crack Propagation: Review of Theories and Applications.-  Dissipative Heating, Fatigue and Fracture Behaviour of Rubber Under Multiaxial Loading.- Determination of the Loading Mode Dependence of the Proportionality Parameter for the Tearing Energy of Embedded Flaws in Elastomers Under Multiaxial Deformations.- Microfocused Beam SAXS and WAXS Mapping at the Crack Tip and Fatigue Crack Propagation in Natural Rubber.

Gert Heinrich graduated from the University in Jena (Germany) in quantum physics in 1973. At the Technical University (TH) Leuna-Merseburg, he finished his doctorate in 1978 in polymer network physics and his Habilitation in 1986 about theory of polymer networks and topological constraints. In 1990 he received a position at the tire manufacturer Continental in Hanover (Germany) as senior research scientist and head of Materials Research. Heinrich continued his academic activities as lecturer at Universities of Hanover and Halle/Wittenberg. In 2002, he was appointed as full professor for “Polymer Materials and Rubber Technology” at the Technical University Dresden and as director of the Institute of Polymer Materials at the Leibniz Institute of Polymer Research Dresden e. V. (IPF). Since 2017 he is Senior Professor. His work has been recognized by several grants and awards, e.g. the George Stafford Whitby Award for distinguished teaching and research from theRubber Division of the ACS, the Colwyn Medal in UK for outstanding services to the rubber industry; the Carl Dietrich Harries Medal from the German Rubber Society, and the Lifetime Achievement Award from Tire Technology International Magazine. Science ranking (Google Scholar) indicates:  h-Index = 69;  i10-Index = 363 (19-01-2021).Reinhold Kipscholl graduated as Dipl.-Ing. in engineering of data processing and electronics. He is active since more than 20 years in leading industrial positions, especially in the field of testing and characterization of materials with respect of their physical behavior. Since 20 years he is General Manager of Coesfeld GmbH & Co. KG (Dortmund), a German Company developing and producing material testing equipment for plastics and elastomers. Since 2012 R. Kipscholl is founder and General Manager of PRL Polymer Research Lab., a Czech Company researching and developing new testing methods for characterizationof fracture and wear behavior of rubbers. He has been awarded with the 2018 Fernley H. Bunbury Award (Rubber Division, American Chemical Society). Scopus indicates 10 publications.Radek Stoček obtained his diploma degree as an engineer in 2005 from the Czech Technical University in Prague and received his Ph.D. in engineering science in 2012 from the Technical University Chemnitz (Germany), working with M. Gehde and parallel with G. Heinrich at IPF Dresden (G). Then he started an industrial career at Polymer Research Lab (PRL), Zlin, Czech Republic, and parallel an independent academic career at the Tomas Bata University (TBU) in Zlin. He finished his Habilitation in 2019. Currently he is holding the two positions as Head of R&D at PRL and Head of the Rubber Department at TBU. His research and scientific interests are focused on characterization of rubber material properties with respect to fatigue and fracture mechanics and on the development of new and advanced testing methodologies, hardware and equipments. One main goal is to optimize industrial rubber products in terms of performance and durability as well as to fasten development cycles and minimizing extensive real rubber product tests before production. His work has been recognized by awards from The Tire Society (USA). R. Stocek is author of 30 publications (according to Scopus) and holds two Utility Models.

• Some Revisions of Fatigue Crack Growth Characteristics of Rubber.- Determining Parametrical Functions Defining the Deformations of a Plane Strain Tensile Rubber Sample.- The effect of polyglycols on the fatigue crack growth of silica filled natural rubber.- The Fatigue Threshold of Rubber and Its Characterization Using the Cutting Method.- Critical Plane Analysis of Rubber.- Cavitation Micro-mechanisms in Silica-Filled Styrene-Butadiene Rubber Upon Fatigue and Cyclic Tensile Testing.- New Approaches to Modeling Failure and Fracture of Rubberlike Materials.- Influence of Filler Induced Cracks on the Statistical Lifetime of Rubber: A Review.- Fatigue Life Analysis of Solid Elastomer-Like Polyurethane.- Cavitation in Rubber Vulcanizates Subjected to Constrained Tensile Deformation.- Fatigue Crack Growth vs. Chip and Cut Wear of NR and NR/SBR Blend-Based Rubber Compounds.- Review on the Role of Phase Morphology and Energy Dissipation Around the Crack Tip During Fatigue Crack Propagation ofFiller-Reinforced Elastomer Blends.- Methodology Used for Characterizing the Fracture and Fatigue Behavior of Thermoplastic Elastomers.- About the influence of materials parameters on the ultimate and fatigue properties of elastomers.- Influence of Plasticizers Basing on Renewable Sources on the Deformation and Fracture Behaviour of Elastomers.- Fracture and Fatigue Failure Simulation of Polymeric Material at Finite Deformation by the Phase-Field Method and the Material Force Approach.- Viscoelastic Crack Propagation: Review of Theories and Applications.-  Dissipative Heating, Fatigue and Fracture Behaviour of Rubber Under Multiaxial Loading.- Determination of the Loading Mode Dependence of the Proportionality Parameter for the Tearing Energy of Embedded Flaws in Elastomers Under Multiaxial Deformations.- Microfocused Beam SAXS and WAXS Mapping at the Crack Tip and Fatigue Crack Propagation in Natural Rubber.

Gert Heinrich graduated from the University in Jena (Germany) in quantum physics in 1973. At the Technical University (TH) Leuna-Merseburg, he finished his doctorate in 1978 in polymer network physics and his Habilitation in 1986 about theory of polymer networks and topological constraints. In 1990 he received a position at the tire manufacturer Continental in Hanover (Germany) as senior research scientist and head of Materials Research. Heinrich continued his academic activities as lecturer at Universities of Hanover and Halle/Wittenberg. In 2002, he was appointed as full professor for “Polymer Materials and Rubber Technology” at the Technical University Dresden and as director of the Institute of Polymer Materials at the Leibniz Institute of Polymer Research Dresden e. V. (IPF). Since 2017 he is Senior Professor. His work has been recognized by several grants and awards, e.g. the George Stafford Whitby Award for distinguished teaching and research from theRubber Division of the ACS, the Colwyn Medal in UK for outstanding services to the rubber industry; the Carl Dietrich Harries Medal from the German Rubber Society, and the Lifetime Achievement Award from Tire Technology International Magazine. Science ranking (Google Scholar) indicates:  h-Index = 69;  i10-Index = 363 (19-01-2021).Reinhold Kipscholl graduated as Dipl.-Ing. in engineering of data processing and electronics. He is active since more than 20 years in leading industrial positions, especially in the field of testing and characterization of materials with respect of their physical behavior. Since 20 years he is General Manager of Coesfeld GmbH & Co. KG (Dortmund), a German Company developing and producing material testing equipment for plastics and elastomers. Since 2012 R. Kipscholl is founder and General Manager of PRL Polymer Research Lab., a Czech Company researching and developing new testing methods for characterizationof fracture and wear behavior of rubbers. He has been awarded with the 2018 Fernley H. Bunbury Award (Rubber Division, American Chemical Society). Scopus indicates 10 publications.Radek Stoček obtained his diploma degree as an engineer in 2005 from the Czech Technical University in Prague and received his Ph.D. in engineering science in 2012 from the Technical University Chemnitz (Germany), working with M. Gehde and parallel with G. Heinrich at IPF Dresden (G). Then he started an industrial career at Polymer Research Lab (PRL), Zlin, Czech Republic, and parallel an independent academic career at the Tomas Bata University (TBU) in Zlin. He finished his Habilitation in 2019. Currently he is holding the two positions as Head of R&D at PRL and Head of the Rubber Department at TBU. His research and scientific interests are focused on characterization of rubber material properties with respect to fatigue and fracture mechanics and on the development of new and advanced testing methodologies, hardware and equipments. One main goal is to optimize industrial rubber products in terms of performance and durability as well as to fasten development cycles and minimizing extensive real rubber product tests before production. His work has been recognized by awards from The Tire Society (USA). R. Stocek is author of 30 publications (according to Scopus) and holds two Utility Models.

• Some Revisions of Fatigue Crack Growth Characteristics of Rubber.- Determining Parametrical Functions Defining the Deformations of a Plane Strain Tensile Rubber Sample.- The effect of polyglycols on the fatigue crack growth of silica filled natural rubber.- The Fatigue Threshold of Rubber and Its Characterization Using the Cutting Method.- Critical Plane Analysis of Rubber.- Cavitation Micro-mechanisms in Silica-Filled Styrene-Butadiene Rubber Upon Fatigue and Cyclic Tensile Testing.- New Approaches to Modeling Failure and Fracture of Rubberlike Materials.- Influence of Filler Induced Cracks on the Statistical Lifetime of Rubber: A Review.- Fatigue Life Analysis of Solid Elastomer-Like Polyurethane.- Cavitation in Rubber Vulcanizates Subjected to Constrained Tensile Deformation.- Fatigue Crack Growth vs. Chip and Cut Wear of NR and NR/SBR Blend-Based Rubber Compounds.- Review on the Role of Phase Morphology and Energy Dissipation Around the Crack Tip During Fatigue Crack Propagation ofFiller-Reinforced Elastomer Blends.- Methodology Used for Characterizing the Fracture and Fatigue Behavior of Thermoplastic Elastomers.- About the influence of materials parameters on the ultimate and fatigue properties of elastomers.- Influence of Plasticizers Basing on Renewable Sources on the Deformation and Fracture Behaviour of Elastomers.- Fracture and Fatigue Failure Simulation of Polymeric Material at Finite Deformation by the Phase-Field Method and the Material Force Approach.- Viscoelastic Crack Propagation: Review of Theories and Applications.-  Dissipative Heating, Fatigue and Fracture Behaviour of Rubber Under Multiaxial Loading.- Determination of the Loading Mode Dependence of the Proportionality Parameter for the Tearing Energy of Embedded Flaws in Elastomers Under Multiaxial Deformations.- Microfocused Beam SAXS and WAXS Mapping at the Crack Tip and Fatigue Crack Propagation in Natural Rubber.