The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents.

• Part 1: Pan American Materials Congress: Advanced Biomaterials.- Analysis of Biomimetic Surgical Clip Using Finite Element Modeling for Geometry Improvement and Biomaterials Selection.- Chemical composition effect of sol-gel derived bioactive glass over bioactivity behavior.- Effects of Dialium guineense based zinc nanoparticle material on the inhibition of microbes inducing microbiologically influenced corrosion.- Injectability evaluation of bone-graft substitutes based on carrageenan and hydroxyapatite nanorods.- Synthesis and characterization of Ni0.5Zn0.5Fe2O4@mSiO2 core shell nanocarrier for drug delivery applications.- Part 2: Pan American Materials Congress: Advanced Manufacturing.- Carbon Based Coatings Deposited On Nitrided Stainless Steel: Study Of Thermal Degradation.- Comparative Mechanical Analysis Between Epoxy Composite Reinforced With Random Short Cuarua Fibers And Aligned Long Curaua Fibers.- Effect of Tool Rotation on Tool Wear Phenomenon in Rotary Tool micro-USM.- Numerical Modeling of High-Velocity Impact Welding.- Selective Laser Sintering of Polyamide/Hydroxyapatite Scaffolds.- Part 3: Pan American Materials Congress: Materials for Green Energy.- A comparison between recycled spent zeolite and calcite limestone for manganese removal.- Effect of Mo6+ Substitution on Microstructure and Lithium Ionic Conductivity of Garnet-Type Li7La3Zr2O12 Solid Electrolytes by Field Assisted Sintering Technology.- Electromagnetic Levitation Refining Of Silicon-iron Alloys for Generation of Solar Grade Silicon.- Green Extract of Mate Tea as Corrosion Inhibitor of Copper and Aluminum.- Platinum Salts Synthesis as Precursors to Get Heterogeneous Catalysts for Biofuels Production.- Technical and Environmental Assessment of an Alternative Binder for Low Traffic Roads with LCA Methodology.- Part 4: Pan American Materials Congress: Materials for Infrastructure.- Anticorrosion and Adsorption Mechanism of Rhizophora mangle L Leaf-extract on Steel-reinforcement in 3.5% NaCl-immersed Concrete.- Cassia fistula leaf-extract Effect on Corrosion-inhibition of Stainless-steel in 0.5 M HCl.- Effect of C5H11NO2S on Reinforcing-steel Corrosion in Concrete Immersed in Industrial/Microbial Simulating-environment.- FIBER REINFORCED CONCRETE MANUFACTURED WITH ELECTRIC ARC FURNACE SLAG.- Jigs, hydro-cyclones and sensor-based sorting to value recycled aggregates.- Performance of hydraulic mixes manufactured with electric arc furnace slag aggregates.- POROUS ASPHALT MIXTURES WITH 100% SIDERURGIC AGGREGATES.- Part 5: Pan American Materials Congress: Materials for Oil and Gas Industry.- Blends of PVDF with its processing waste: Study of the mechanical properties of the blends thermally aged.- DYNAMIC TRANSFORMATION AND RETRANSFORMATION DURING THE SIMULATED PLATE ROLLING OF AN X70 PIPELINE STEEL.- Effect of Heat Input on the microstructure and toughness of welded API pipelines.- EVALUATION OF NON-DESTRUCTIVE TECHNIQUES (THERMOGRAPHY, ULTRASOUND AND EDDY CURRENT) FOR DETECTION OF FAILURES IN METALLIC SUBSTRATES WITH COMPOSITE ANTICORROSIVE COATINGS.- Structural Integrity of Pipelines.- Part 6: Pan American Materials Congress: Materials for Transportation and Lightweighting.- ADVANTAGES OF HOT COMPRESSION IN THE MANUFACTURE OF AlB4C COMPOSITES.- An Improved Silicon Carbide Monofilament for the Reinforcement of Metal Matrix Composites.- Analysis of coir fiber porosity.- BALLISTIC PERFORMANCE IN MULTILAYER ARMOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS.- Curaua non-woven fabric composite for ceramic multilayered armors: A lightweight, natural, and low cost alternative for KevlarTM.- Effect of Forging on Microstructure, Texture and Compression Behaviour of Extruded AZ31B.- EFFECTS OF HYPOEUTECTIC Sc ADDITIONS TO Al-4.5 wt% Cu UNDER DIFFERENT COOLING RATES.- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH FIQUE FABRIC.- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH JUTE FABRIC.- Microstructure and Hardness of Subzero Quenched and Heat Treated Ti-6Al-4V Alloy.- Nano-Additive Reinforcement of Thermoplastic Microballoon Epoxy Syntactic Foams.- Nanocomposites Mechanical and Tribological Properties using Graphene Coated Ceramic Nanoparticles for Light Weight Applications.- Synthesis of Energetic Composites in Ti-Al-B-C System by Adiabatic Explosive Compaction.- Tensile and impact properties of two fiber configurations for curaua reinforced composites.- Thermo\\8722;Mechanical behavior of nanostructure polyacrylic polymer based on Al2 O3 and bentonite nanoparticles.- Thermo\\8722;mechanical properties of waterborne acrylate hybrid nanocomposites.- Thermo-mechanical properties of copolymer/clay nanocomposites: A comparative study of production method by in-situ and solution mixture.- Part 7: Pan American Materials Congress: Minerals Extraction and Processing.- Biotechnological recycling of precious metals sourced from post-consumer products.- Biotechnologies for water recycling in the mineral industry.- Dissolution thermodynamics of smithsonite in alkaline iminodiacetate aqueous solution.- Effect of ethylenediamine on smithsonite flotation.- Extraction of Gold from sands and Slimes Tailings Dump from Mazowe Mine, Zimbabwe.- Gold Recovery from Waste Solutions of PCB Gold Plating Process using Hydro Cyclone Reactor for Demonstration Study.- Improving Quality of Coke Made from Chinese Xinjiang Gas Coal with High Strength Modifier.- INVESTIGATING THE DISSOLUTION CHARACTERISTICS OF STRONTIUM SULFIDE.- Kinetic study on the leaching of vanadium-bearing converter slag with dilute sulfuric acid.- Leaching of Spent Ni-Mo Hydrodesulphurization (HDS) Catalyst in Oxalic Acid Solutions.- Novel Adsorbent from Iron Ore Concentration Tailings for Toxic Cationic Dye Removal from Water.- Preliminary analysis of the application of sensor based sorting on a limestone mine in the region Caçapava do Sul, Brazil.- Preparation of high grade Industrial Copper Compound from a Nigerian Malachite mineral by Hydrometallurgical process.- PROCESS OF IMPROVING THE FLOTATION USING ULTRASONIC BOMBARDMENT.- Production of strontianite from celestite ore in carbonate media.- Reduction Kinetics and Characterization Study of Synthetic Magnetite Micro Fines.- Study on Leaching Valuable Elements from Bayan Obo Tailings.- Study on thermal decomposition and oxidation characteristics of iron ores.- The direct leaching of micro-disseminated gold concentrate by bromide process and the characterization of leaching products.- Working Experience with the new WOX Plant to treat zinc waelzoxide at ZGH Boleslaw SA, Poland.- Part 8: Pan American Materials Congress: Nanocrystalline and Ultra-fine Grain Materials and Bulk Metallic Glasses.- Continuous dynamic recovery in pure aluminum deformed to high strain by accumulative press bonding.- Effects of Natural Aging and Post-processed Heat Treatment on the Microstructure and Mechanical Properties of Friction Stir Processed Al-7B04.- Evaluation of the hardening and softening effects in Zn-21Al-2Cu with as cast and homogenized microstructure processed by equal channel angular pressing.- Part 9: Pan American Materials Congress: Steels.- Effect of titanium sulfide precipitates on grain size in low carbon steel.- Evolution of Austenite Dislocation Density during Hot Deformation using a Physical Dynamic Recrystallization Model.- Influence of a Rapid Heating on the Microstructure and Properties of Press-Hardening Steel Sheets.- Jansto:New Generation Niobium Bearing Structural Steels for Future Infrastructure Demands.- Kinetic study of the austenite decomposition during continuous cooling in a welding steel.- Microstructural Evolution in Microalloyed Steels during Thermomechanical Rod Rolling.- MODELING OF METAL-SLAG MASS AND MOMENTUM EXCHANGES IN GAS-STIRRED LADLES.- Study on adjustment and optimization of LF refining slag of spring steel 55SiCrA.- Tempering Response of Bainitic and Martensitic Microstructures.- The research on the relationship between gas movement behaviors and circulating flow of the molten steel in RH.

The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents.

• Part 1: Pan American Materials Congress: Advanced Biomaterials.- Analysis of Biomimetic Surgical Clip Using Finite Element Modeling for Geometry Improvement and Biomaterials Selection.- Chemical composition effect of sol-gel derived bioactive glass over bioactivity behavior.- Effects of Dialium guineense based zinc nanoparticle material on the inhibition of microbes inducing microbiologically influenced corrosion.- Injectability evaluation of bone-graft substitutes based on carrageenan and hydroxyapatite nanorods.- Synthesis and characterization of Ni0.5Zn0.5Fe2O4@mSiO2 core shell nanocarrier for drug delivery applications.- Part 2: Pan American Materials Congress: Advanced Manufacturing.- Carbon Based Coatings Deposited On Nitrided Stainless Steel: Study Of Thermal Degradation.- Comparative Mechanical Analysis Between Epoxy Composite Reinforced With Random Short Cuarua Fibers And Aligned Long Curaua Fibers.- Effect of Tool Rotation on Tool Wear Phenomenon in Rotary Tool micro-USM.- Numerical Modeling of High-Velocity Impact Welding.- Selective Laser Sintering of Polyamide/Hydroxyapatite Scaffolds.- Part 3: Pan American Materials Congress: Materials for Green Energy.- A comparison between recycled spent zeolite and calcite limestone for manganese removal.- Effect of Mo6+ Substitution on Microstructure and Lithium Ionic Conductivity of Garnet-Type Li7La3Zr2O12 Solid Electrolytes by Field Assisted Sintering Technology.- Electromagnetic Levitation Refining Of Silicon-iron Alloys for Generation of Solar Grade Silicon.- Green Extract of Mate Tea as Corrosion Inhibitor of Copper and Aluminum.- Platinum Salts Synthesis as Precursors to Get Heterogeneous Catalysts for Biofuels Production.- Technical and Environmental Assessment of an Alternative Binder for Low Traffic Roads with LCA Methodology.- Part 4: Pan American Materials Congress: Materials for Infrastructure.- Anticorrosion and Adsorption Mechanism of Rhizophora mangle L Leaf-extract on Steel-reinforcement in 3.5% NaCl-immersed Concrete.- Cassia fistula leaf-extract Effect on Corrosion-inhibition of Stainless-steel in 0.5 M HCl.- Effect of C5H11NO2S on Reinforcing-steel Corrosion in Concrete Immersed in Industrial/Microbial Simulating-environment.- FIBER REINFORCED CONCRETE MANUFACTURED WITH ELECTRIC ARC FURNACE SLAG.- Jigs, hydro-cyclones and sensor-based sorting to value recycled aggregates.- Performance of hydraulic mixes manufactured with electric arc furnace slag aggregates.- POROUS ASPHALT MIXTURES WITH 100% SIDERURGIC AGGREGATES.- Part 5: Pan American Materials Congress: Materials for Oil and Gas Industry.- Blends of PVDF with its processing waste: Study of the mechanical properties of the blends thermally aged.- DYNAMIC TRANSFORMATION AND RETRANSFORMATION DURING THE SIMULATED PLATE ROLLING OF AN X70 PIPELINE STEEL.- Effect of Heat Input on the microstructure and toughness of welded API pipelines.- EVALUATION OF NON-DESTRUCTIVE TECHNIQUES (THERMOGRAPHY, ULTRASOUND AND EDDY CURRENT) FOR DETECTION OF FAILURES IN METALLIC SUBSTRATES WITH COMPOSITE ANTICORROSIVE COATINGS.- Structural Integrity of Pipelines.- Part 6: Pan American Materials Congress: Materials for Transportation and Lightweighting.- ADVANTAGES OF HOT COMPRESSION IN THE MANUFACTURE OF AlB4C COMPOSITES.- An Improved Silicon Carbide Monofilament for the Reinforcement of Metal Matrix Composites.- Analysis of coir fiber porosity.- BALLISTIC PERFORMANCE IN MULTILAYER ARMOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS.- Curaua non-woven fabric composite for ceramic multilayered armors: A lightweight, natural, and low cost alternative for KevlarTM.- Effect of Forging on Microstructure, Texture and Compression Behaviour of Extruded AZ31B.- EFFECTS OF HYPOEUTECTIC Sc ADDITIONS TO Al-4.5 wt% Cu UNDER DIFFERENT COOLING RATES.- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH FIQUE FABRIC.- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH JUTE FABRIC.- Microstructure and Hardness of Subzero Quenched and Heat Treated Ti-6Al-4V Alloy.- Nano-Additive Reinforcement of Thermoplastic Microballoon Epoxy Syntactic Foams.- Nanocomposites Mechanical and Tribological Properties using Graphene Coated Ceramic Nanoparticles for Light Weight Applications.- Synthesis of Energetic Composites in Ti-Al-B-C System by Adiabatic Explosive Compaction.- Tensile and impact properties of two fiber configurations for curaua reinforced composites.- Thermo\\8722;Mechanical behavior of nanostructure polyacrylic polymer based on Al2 O3 and bentonite nanoparticles.- Thermo\\8722;mechanical properties of waterborne acrylate hybrid nanocomposites.- Thermo-mechanical properties of copolymer/clay nanocomposites: A comparative study of production method by in-situ and solution mixture.- Part 7: Pan American Materials Congress: Minerals Extraction and Processing.- Biotechnological recycling of precious metals sourced from post-consumer products.- Biotechnologies for water recycling in the mineral industry.- Dissolution thermodynamics of smithsonite in alkaline iminodiacetate aqueous solution.- Effect of ethylenediamine on smithsonite flotation.- Extraction of Gold from sands and Slimes Tailings Dump from Mazowe Mine, Zimbabwe.- Gold Recovery from Waste Solutions of PCB Gold Plating Process using Hydro Cyclone Reactor for Demonstration Study.- Improving Quality of Coke Made from Chinese Xinjiang Gas Coal with High Strength Modifier.- INVESTIGATING THE DISSOLUTION CHARACTERISTICS OF STRONTIUM SULFIDE.- Kinetic study on the leaching of vanadium-bearing converter slag with dilute sulfuric acid.- Leaching of Spent Ni-Mo Hydrodesulphurization (HDS) Catalyst in Oxalic Acid Solutions.- Novel Adsorbent from Iron Ore Concentration Tailings for Toxic Cationic Dye Removal from Water.- Preliminary analysis of the application of sensor based sorting on a limestone mine in the region Caçapava do Sul, Brazil.- Preparation of high grade Industrial Copper Compound from a Nigerian Malachite mineral by Hydrometallurgical process.- PROCESS OF IMPROVING THE FLOTATION USING ULTRASONIC BOMBARDMENT.- Production of strontianite from celestite ore in carbonate media.- Reduction Kinetics and Characterization Study of Synthetic Magnetite Micro Fines.- Study on Leaching Valuable Elements from Bayan Obo Tailings.- Study on thermal decomposition and oxidation characteristics of iron ores.- The direct leaching of micro-disseminated gold concentrate by bromide process and the characterization of leaching products.- Working Experience with the new WOX Plant to treat zinc waelzoxide at ZGH Boleslaw SA, Poland.- Part 8: Pan American Materials Congress: Nanocrystalline and Ultra-fine Grain Materials and Bulk Metallic Glasses.- Continuous dynamic recovery in pure aluminum deformed to high strain by accumulative press bonding.- Effects of Natural Aging and Post-processed Heat Treatment on the Microstructure and Mechanical Properties of Friction Stir Processed Al-7B04.- Evaluation of the hardening and softening effects in Zn-21Al-2Cu with as cast and homogenized microstructure processed by equal channel angular pressing.- Part 9: Pan American Materials Congress: Steels.- Effect of titanium sulfide precipitates on grain size in low carbon steel.- Evolution of Austenite Dislocation Density during Hot Deformation using a Physical Dynamic Recrystallization Model.- Influence of a Rapid Heating on the Microstructure and Properties of Press-Hardening Steel Sheets.- Jansto:New Generation Niobium Bearing Structural Steels for Future Infrastructure Demands.- Kinetic study of the austenite decomposition during continuous cooling in a welding steel.- Microstructural Evolution in Microalloyed Steels during Thermomechanical Rod Rolling.- MODELING OF METAL-SLAG MASS AND MOMENTUM EXCHANGES IN GAS-STIRRED LADLES.- Study on adjustment and optimization of LF refining slag of spring steel 55SiCrA.- Tempering Response of Bainitic and Martensitic Microstructures.- The research on the relationship between gas movement behaviors and circulating flow of the molten steel in RH.

The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents.

• Part 1: Pan American Materials Congress: Advanced Biomaterials.- Analysis of Biomimetic Surgical Clip Using Finite Element Modeling for Geometry Improvement and Biomaterials Selection.- Chemical composition effect of sol-gel derived bioactive glass over bioactivity behavior.- Effects of Dialium guineense based zinc nanoparticle material on the inhibition of microbes inducing microbiologically influenced corrosion.- Injectability evaluation of bone-graft substitutes based on carrageenan and hydroxyapatite nanorods.- Synthesis and characterization of Ni0.5Zn0.5Fe2O4@mSiO2 core shell nanocarrier for drug delivery applications.- Part 2: Pan American Materials Congress: Advanced Manufacturing.- Carbon Based Coatings Deposited On Nitrided Stainless Steel: Study Of Thermal Degradation.- Comparative Mechanical Analysis Between Epoxy Composite Reinforced With Random Short Cuarua Fibers And Aligned Long Curaua Fibers.- Effect of Tool Rotation on Tool Wear Phenomenon in Rotary Tool micro-USM.- Numerical Modeling of High-Velocity Impact Welding.- Selective Laser Sintering of Polyamide/Hydroxyapatite Scaffolds.- Part 3: Pan American Materials Congress: Materials for Green Energy.- A comparison between recycled spent zeolite and calcite limestone for manganese removal.- Effect of Mo6+ Substitution on Microstructure and Lithium Ionic Conductivity of Garnet-Type Li7La3Zr2O12 Solid Electrolytes by Field Assisted Sintering Technology.- Electromagnetic Levitation Refining Of Silicon-iron Alloys for Generation of Solar Grade Silicon.- Green Extract of Mate Tea as Corrosion Inhibitor of Copper and Aluminum.- Platinum Salts Synthesis as Precursors to Get Heterogeneous Catalysts for Biofuels Production.- Technical and Environmental Assessment of an Alternative Binder for Low Traffic Roads with LCA Methodology.- Part 4: Pan American Materials Congress: Materials for Infrastructure.- Anticorrosion and Adsorption Mechanism of Rhizophora mangle L Leaf-extract on Steel-reinforcement in 3.5% NaCl-immersed Concrete.- Cassia fistula leaf-extract Effect on Corrosion-inhibition of Stainless-steel in 0.5 M HCl.- Effect of C5H11NO2S on Reinforcing-steel Corrosion in Concrete Immersed in Industrial/Microbial Simulating-environment.- FIBER REINFORCED CONCRETE MANUFACTURED WITH ELECTRIC ARC FURNACE SLAG.- Jigs, hydro-cyclones and sensor-based sorting to value recycled aggregates.- Performance of hydraulic mixes manufactured with electric arc furnace slag aggregates.- POROUS ASPHALT MIXTURES WITH 100% SIDERURGIC AGGREGATES.- Part 5: Pan American Materials Congress: Materials for Oil and Gas Industry.- Blends of PVDF with its processing waste: Study of the mechanical properties of the blends thermally aged.- DYNAMIC TRANSFORMATION AND RETRANSFORMATION DURING THE SIMULATED PLATE ROLLING OF AN X70 PIPELINE STEEL.- Effect of Heat Input on the microstructure and toughness of welded API pipelines.- EVALUATION OF NON-DESTRUCTIVE TECHNIQUES (THERMOGRAPHY, ULTRASOUND AND EDDY CURRENT) FOR DETECTION OF FAILURES IN METALLIC SUBSTRATES WITH COMPOSITE ANTICORROSIVE COATINGS.- Structural Integrity of Pipelines.- Part 6: Pan American Materials Congress: Materials for Transportation and Lightweighting.- ADVANTAGES OF HOT COMPRESSION IN THE MANUFACTURE OF AlB4C COMPOSITES.- An Improved Silicon Carbide Monofilament for the Reinforcement of Metal Matrix Composites.- Analysis of coir fiber porosity.- BALLISTIC PERFORMANCE IN MULTILAYER ARMOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS.- Curaua non-woven fabric composite for ceramic multilayered armors: A lightweight, natural, and low cost alternative for KevlarTM.- Effect of Forging on Microstructure, Texture and Compression Behaviour of Extruded AZ31B.- EFFECTS OF HYPOEUTECTIC Sc ADDITIONS TO Al-4.5 wt% Cu UNDER DIFFERENT COOLING RATES.- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH FIQUE FABRIC.- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH JUTE FABRIC.- Microstructure and Hardness of Subzero Quenched and Heat Treated Ti-6Al-4V Alloy.- Nano-Additive Reinforcement of Thermoplastic Microballoon Epoxy Syntactic Foams.- Nanocomposites Mechanical and Tribological Properties using Graphene Coated Ceramic Nanoparticles for Light Weight Applications.- Synthesis of Energetic Composites in Ti-Al-B-C System by Adiabatic Explosive Compaction.- Tensile and impact properties of two fiber configurations for curaua reinforced composites.- Thermo\\8722;Mechanical behavior of nanostructure polyacrylic polymer based on Al2 O3 and bentonite nanoparticles.- Thermo\\8722;mechanical properties of waterborne acrylate hybrid nanocomposites.- Thermo-mechanical properties of copolymer/clay nanocomposites: A comparative study of production method by in-situ and solution mixture.- Part 7: Pan American Materials Congress: Minerals Extraction and Processing.- Biotechnological recycling of precious metals sourced from post-consumer products.- Biotechnologies for water recycling in the mineral industry.- Dissolution thermodynamics of smithsonite in alkaline iminodiacetate aqueous solution.- Effect of ethylenediamine on smithsonite flotation.- Extraction of Gold from sands and Slimes Tailings Dump from Mazowe Mine, Zimbabwe.- Gold Recovery from Waste Solutions of PCB Gold Plating Process using Hydro Cyclone Reactor for Demonstration Study.- Improving Quality of Coke Made from Chinese Xinjiang Gas Coal with High Strength Modifier.- INVESTIGATING THE DISSOLUTION CHARACTERISTICS OF STRONTIUM SULFIDE.- Kinetic study on the leaching of vanadium-bearing converter slag with dilute sulfuric acid.- Leaching of Spent Ni-Mo Hydrodesulphurization (HDS) Catalyst in Oxalic Acid Solutions.- Novel Adsorbent from Iron Ore Concentration Tailings for Toxic Cationic Dye Removal from Water.- Preliminary analysis of the application of sensor based sorting on a limestone mine in the region Caçapava do Sul, Brazil.- Preparation of high grade Industrial Copper Compound from a Nigerian Malachite mineral by Hydrometallurgical process.- PROCESS OF IMPROVING THE FLOTATION USING ULTRASONIC BOMBARDMENT.- Production of strontianite from celestite ore in carbonate media.- Reduction Kinetics and Characterization Study of Synthetic Magnetite Micro Fines.- Study on Leaching Valuable Elements from Bayan Obo Tailings.- Study on thermal decomposition and oxidation characteristics of iron ores.- The direct leaching of micro-disseminated gold concentrate by bromide process and the characterization of leaching products.- Working Experience with the new WOX Plant to treat zinc waelzoxide at ZGH Boleslaw SA, Poland.- Part 8: Pan American Materials Congress: Nanocrystalline and Ultra-fine Grain Materials and Bulk Metallic Glasses.- Continuous dynamic recovery in pure aluminum deformed to high strain by accumulative press bonding.- Effects of Natural Aging and Post-processed Heat Treatment on the Microstructure and Mechanical Properties of Friction Stir Processed Al-7B04.- Evaluation of the hardening and softening effects in Zn-21Al-2Cu with as cast and homogenized microstructure processed by equal channel angular pressing.- Part 9: Pan American Materials Congress: Steels.- Effect of titanium sulfide precipitates on grain size in low carbon steel.- Evolution of Austenite Dislocation Density during Hot Deformation using a Physical Dynamic Recrystallization Model.- Influence of a Rapid Heating on the Microstructure and Properties of Press-Hardening Steel Sheets.- Jansto:New Generation Niobium Bearing Structural Steels for Future Infrastructure Demands.- Kinetic study of the austenite decomposition during continuous cooling in a welding steel.- Microstructural Evolution in Microalloyed Steels during Thermomechanical Rod Rolling.- MODELING OF METAL-SLAG MASS AND MOMENTUM EXCHANGES IN GAS-STIRRED LADLES.- Study on adjustment and optimization of LF refining slag of spring steel 55SiCrA.- Tempering Response of Bainitic and Martensitic Microstructures.- The research on the relationship between gas movement behaviors and circulating flow of the molten steel in RH.