Shinichi Fukushige is a professor at the Department of Industrial and Management Systems Engineering, School of Creative Science and Engineering, Waseda University. After obtaining his doctor’s degree in precision machinery engineering from the University of Tokyo in 2006, he began work at Osaka University as an assistant professor. Since 2014, he served as an associate professor at the Department of Mechanical Engineering, Graduate School of Engineering, Osaka University before moving to Waseda University in 2020. His current research interests include product life cycle design and management, simulation of circular economy, environmentally conscious product and service design, and circular business design.Hideki Kobayashi is a professor at the Department of Mechanical Engineering, Graduate School of Engineering, Osaka University. He graduated from Hokkaido University, and earned PhD in Design Engineering from the University of Tokyo. Prior to the current position, he was engaged to Toshiba, as a senior manager of Corporate Research & Development Center in the area of environmental and sustainable technologies. Membership in the Japan Society of Mechanical Engineer (JSME), Japan Society for Precision Engineering (JSPE), etc. Co-director of Italian Design Summer School (IDSS) in Bologna University. His major research interests include sustainable system design and management, sustainable consumption and production (SCP), sustainable manufacturing.Eiji Yamasue is a Professor at the Department of Mechanical Engineering in the College of Science and Engineering, Ritsumeikan University, Japan. He completed his PhD from Tokyo Institute of Technology in 2000. His research interests include industrial ecology, energy and resources, etc. He has authored several books and has published 120 papers with over 1800 citations to his credit.Keishiro Hara is a professor and the co-director of Center for Future Innovation (CFi), Graduate School of Engineering, Osaka University. He is also consulting fellow at Research Institute for Economy, Trade and Industry (RIETI). He is elected the Fellow of The Engineering Academy of Japan. He was appointed as senior officer for technology policy and strategy at Manufacturing Industries Bureau, Ministry of Economy, Trade and Industry (METI), the government of Japan, between October 2016 and March 2018. His primary research interests include Future Design and Sustainability Science. Prof. Hara holds Ph.D. in Environmental Studies and Bachelor of Engineering, both from the University of Tokyo.

• 1.  Modeling local product development through multidisciplinary collaboration: A case study in Nagara, Chiba Prefecture in Japan.- 2.  Developing reusable packaging for FMCG: Consumers’ perceptions of benefits and risks of refillable and returnable packaging systems.- 3.  Design, evaluation, and acceptance of advanced energy efficient houses for Thailand.- 4.  Explore the Framework Construction of Gamification Applied to Basic Design Teaching.- 5.  Future Design Based Policy Making Card Game For High School Education.- 6.  Frugal innovation in BoP communities: co-design of a technical solution to support community agriculture in Mexico.- 7.  Exploring frugal innovation as an eco-design strategy: a case study of a water access solution at the BoP.- 8.  A methodical concept for the development of sustainable products through radical innovations.- 9.  Thinking Model for Japanese Small and Medium-sized Enterprises Innovation Explicated by OntoIS.- 10.  Applying regenerative sustainability principles in manufacturing.- 11.  The Potential for Reverse Innovation in Sustainable Development: A Knowledge-Directed Outlook.- 12.  Finding applications for secondary raw materials.- 13.  Digital product passports in circular economy – case battery passport.- 14.  Data Platforms as tools for circular economy.- 15.  Artificial Intelligence for Process Control In Remanufacturing.- 16.  Machine Recognition of ICs in Recycling Process of Small-sized Electronics.- 17.  Exploring new way media information of the product that promote sustainable consumption and production.- 18.  Towards digital circular design.- 19. Circular furniture design: A case study from Swedish furniture industry.- 20. Current challenges in the lifetime extension of smartphones.- 21. Dielectric Elastomer Transducer (High Efficiency Actuator and Power Generation System).- 22. Sustainable Services in Convenience Stores: a case study of food loss label.- 23. An Overview of Sustainability Held During 1992 to 2021 in China - An Industrial Design Perspective.- 24. Increased personal protective and Medical Equipment manufacturing to fight COVID-19: an egregious approach for the environment.- 25. Silver Recovery from Spent  Photovoltaic Panel Sheets using Electrical Wire Explosion.- 26.  Procedure Model to support the Recycling-oriented Design of Lithium-Ion Batteries for Electric Vehicles.- 27.  Holistic Eco-design Framework Developed Through a Case Study in the Automotive Industry.- 28. Depth and detail or quick and easy? Benefits and drawbacks of two approaches to define sustainability criteria in product development.- 29. Designing Interventions for Sustainability: A conceptual framework for information scoping in the design research phase.- 30. ASustainable Product Service System (PSS) Design for Retail Food Loss and Waste: Research Through Design.- 31.  Environmental and Economical Design Problem of Upgrading and Remanufacturing Option Selection.- 32.  Renewable Energy System in the Off-grid Communities: The Systems' Characteristics and Storage Technologies.- 33.  Optimal Cooling Strategy for Energy Management using Multi-Temperature Acquisition Points in a Protected Cropping Facility.- 34.  Price – based demand response programs considering fixed and dynamic price elasticity matrix (PEM) of demand in the wholesale market in Japan.- 35.  Wind Turbine Minimum Power Loss Optimization, using Nonlinear Mathematical Programming.

Shinichi Fukushige is a professor at the Department of Industrial and Management Systems Engineering, School of Creative Science and Engineering, Waseda University. After obtaining his doctor’s degree in precision machinery engineering from the University of Tokyo in 2006, he began work at Osaka University as an assistant professor. Since 2014, he served as an associate professor at the Department of Mechanical Engineering, Graduate School of Engineering, Osaka University before moving to Waseda University in 2020. His current research interests include product life cycle design and management, simulation of circular economy, environmentally conscious product and service design, and circular business design.Hideki Kobayashi is a professor at the Department of Mechanical Engineering, Graduate School of Engineering, Osaka University. He graduated from Hokkaido University, and earned PhD in Design Engineering from the University of Tokyo. Prior to the current position, he was engaged to Toshiba, as a senior manager of Corporate Research & Development Center in the area of environmental and sustainable technologies. Membership in the Japan Society of Mechanical Engineer (JSME), Japan Society for Precision Engineering (JSPE), etc. Co-director of Italian Design Summer School (IDSS) in Bologna University. His major research interests include sustainable system design and management, sustainable consumption and production (SCP), sustainable manufacturing.Eiji Yamasue is a Professor at the Department of Mechanical Engineering in the College of Science and Engineering, Ritsumeikan University, Japan. He completed his PhD from Tokyo Institute of Technology in 2000. His research interests include industrial ecology, energy and resources, etc. He has authored several books and has published 120 papers with over 1800 citations to his credit.Keishiro Hara is a professor and the co-director of Center for Future Innovation (CFi), Graduate School of Engineering, Osaka University. He is also consulting fellow at Research Institute for Economy, Trade and Industry (RIETI). He is elected the Fellow of The Engineering Academy of Japan. He was appointed as senior officer for technology policy and strategy at Manufacturing Industries Bureau, Ministry of Economy, Trade and Industry (METI), the government of Japan, between October 2016 and March 2018. His primary research interests include Future Design and Sustainability Science. Prof. Hara holds Ph.D. in Environmental Studies and Bachelor of Engineering, both from the University of Tokyo.

• 1.  Modeling local product development through multidisciplinary collaboration: A case study in Nagara, Chiba Prefecture in Japan.- 2.  Developing reusable packaging for FMCG: Consumers’ perceptions of benefits and risks of refillable and returnable packaging systems.- 3.  Design, evaluation, and acceptance of advanced energy efficient houses for Thailand.- 4.  Explore the Framework Construction of Gamification Applied to Basic Design Teaching.- 5.  Future Design Based Policy Making Card Game For High School Education.- 6.  Frugal innovation in BoP communities: co-design of a technical solution to support community agriculture in Mexico.- 7.  Exploring frugal innovation as an eco-design strategy: a case study of a water access solution at the BoP.- 8.  A methodical concept for the development of sustainable products through radical innovations.- 9.  Thinking Model for Japanese Small and Medium-sized Enterprises Innovation Explicated by OntoIS.- 10.  Applying regenerative sustainability principles in manufacturing.- 11.  The Potential for Reverse Innovation in Sustainable Development: A Knowledge-Directed Outlook.- 12.  Finding applications for secondary raw materials.- 13.  Digital product passports in circular economy – case battery passport.- 14.  Data Platforms as tools for circular economy.- 15.  Artificial Intelligence for Process Control In Remanufacturing.- 16.  Machine Recognition of ICs in Recycling Process of Small-sized Electronics.- 17.  Exploring new way media information of the product that promote sustainable consumption and production.- 18.  Towards digital circular design.- 19. Circular furniture design: A case study from Swedish furniture industry.- 20. Current challenges in the lifetime extension of smartphones.- 21. Dielectric Elastomer Transducer (High Efficiency Actuator and Power Generation System).- 22. Sustainable Services in Convenience Stores: a case study of food loss label.- 23. An Overview of Sustainability Held During 1992 to 2021 in China - An Industrial Design Perspective.- 24. Increased personal protective and Medical Equipment manufacturing to fight COVID-19: an egregious approach for the environment.- 25. Silver Recovery from Spent  Photovoltaic Panel Sheets using Electrical Wire Explosion.- 26.  Procedure Model to support the Recycling-oriented Design of Lithium-Ion Batteries for Electric Vehicles.- 27.  Holistic Eco-design Framework Developed Through a Case Study in the Automotive Industry.- 28. Depth and detail or quick and easy? Benefits and drawbacks of two approaches to define sustainability criteria in product development.- 29. Designing Interventions for Sustainability: A conceptual framework for information scoping in the design research phase.- 30. ASustainable Product Service System (PSS) Design for Retail Food Loss and Waste: Research Through Design.- 31.  Environmental and Economical Design Problem of Upgrading and Remanufacturing Option Selection.- 32.  Renewable Energy System in the Off-grid Communities: The Systems' Characteristics and Storage Technologies.- 33.  Optimal Cooling Strategy for Energy Management using Multi-Temperature Acquisition Points in a Protected Cropping Facility.- 34.  Price – based demand response programs considering fixed and dynamic price elasticity matrix (PEM) of demand in the wholesale market in Japan.- 35.  Wind Turbine Minimum Power Loss Optimization, using Nonlinear Mathematical Programming.

Shinichi Fukushige is a professor at the Department of Industrial and Management Systems Engineering, School of Creative Science and Engineering, Waseda University. After obtaining his doctor’s degree in precision machinery engineering from the University of Tokyo in 2006, he began work at Osaka University as an assistant professor. Since 2014, he served as an associate professor at the Department of Mechanical Engineering, Graduate School of Engineering, Osaka University before moving to Waseda University in 2020. His current research interests include product life cycle design and management, simulation of circular economy, environmentally conscious product and service design, and circular business design.Hideki Kobayashi is a professor at the Department of Mechanical Engineering, Graduate School of Engineering, Osaka University. He graduated from Hokkaido University, and earned PhD in Design Engineering from the University of Tokyo. Prior to the current position, he was engaged to Toshiba, as a senior manager of Corporate Research & Development Center in the area of environmental and sustainable technologies. Membership in the Japan Society of Mechanical Engineer (JSME), Japan Society for Precision Engineering (JSPE), etc. Co-director of Italian Design Summer School (IDSS) in Bologna University. His major research interests include sustainable system design and management, sustainable consumption and production (SCP), sustainable manufacturing.Eiji Yamasue is a Professor at the Department of Mechanical Engineering in the College of Science and Engineering, Ritsumeikan University, Japan. He completed his PhD from Tokyo Institute of Technology in 2000. His research interests include industrial ecology, energy and resources, etc. He has authored several books and has published 120 papers with over 1800 citations to his credit.Keishiro Hara is a professor and the co-director of Center for Future Innovation (CFi), Graduate School of Engineering, Osaka University. He is also consulting fellow at Research Institute for Economy, Trade and Industry (RIETI). He is elected the Fellow of The Engineering Academy of Japan. He was appointed as senior officer for technology policy and strategy at Manufacturing Industries Bureau, Ministry of Economy, Trade and Industry (METI), the government of Japan, between October 2016 and March 2018. His primary research interests include Future Design and Sustainability Science. Prof. Hara holds Ph.D. in Environmental Studies and Bachelor of Engineering, both from the University of Tokyo.

• 1.  Modeling local product development through multidisciplinary collaboration: A case study in Nagara, Chiba Prefecture in Japan.- 2.  Developing reusable packaging for FMCG: Consumers’ perceptions of benefits and risks of refillable and returnable packaging systems.- 3.  Design, evaluation, and acceptance of advanced energy efficient houses for Thailand.- 4.  Explore the Framework Construction of Gamification Applied to Basic Design Teaching.- 5.  Future Design Based Policy Making Card Game For High School Education.- 6.  Frugal innovation in BoP communities: co-design of a technical solution to support community agriculture in Mexico.- 7.  Exploring frugal innovation as an eco-design strategy: a case study of a water access solution at the BoP.- 8.  A methodical concept for the development of sustainable products through radical innovations.- 9.  Thinking Model for Japanese Small and Medium-sized Enterprises Innovation Explicated by OntoIS.- 10.  Applying regenerative sustainability principles in manufacturing.- 11.  The Potential for Reverse Innovation in Sustainable Development: A Knowledge-Directed Outlook.- 12.  Finding applications for secondary raw materials.- 13.  Digital product passports in circular economy – case battery passport.- 14.  Data Platforms as tools for circular economy.- 15.  Artificial Intelligence for Process Control In Remanufacturing.- 16.  Machine Recognition of ICs in Recycling Process of Small-sized Electronics.- 17.  Exploring new way media information of the product that promote sustainable consumption and production.- 18.  Towards digital circular design.- 19. Circular furniture design: A case study from Swedish furniture industry.- 20. Current challenges in the lifetime extension of smartphones.- 21. Dielectric Elastomer Transducer (High Efficiency Actuator and Power Generation System).- 22. Sustainable Services in Convenience Stores: a case study of food loss label.- 23. An Overview of Sustainability Held During 1992 to 2021 in China - An Industrial Design Perspective.- 24. Increased personal protective and Medical Equipment manufacturing to fight COVID-19: an egregious approach for the environment.- 25. Silver Recovery from Spent  Photovoltaic Panel Sheets using Electrical Wire Explosion.- 26.  Procedure Model to support the Recycling-oriented Design of Lithium-Ion Batteries for Electric Vehicles.- 27.  Holistic Eco-design Framework Developed Through a Case Study in the Automotive Industry.- 28. Depth and detail or quick and easy? Benefits and drawbacks of two approaches to define sustainability criteria in product development.- 29. Designing Interventions for Sustainability: A conceptual framework for information scoping in the design research phase.- 30. ASustainable Product Service System (PSS) Design for Retail Food Loss and Waste: Research Through Design.- 31.  Environmental and Economical Design Problem of Upgrading and Remanufacturing Option Selection.- 32.  Renewable Energy System in the Off-grid Communities: The Systems' Characteristics and Storage Technologies.- 33.  Optimal Cooling Strategy for Energy Management using Multi-Temperature Acquisition Points in a Protected Cropping Facility.- 34.  Price – based demand response programs considering fixed and dynamic price elasticity matrix (PEM) of demand in the wholesale market in Japan.- 35.  Wind Turbine Minimum Power Loss Optimization, using Nonlinear Mathematical Programming.