Benoit Eynard – författare

Recent rapid globalisation of manufacturing industries leads to a drive and thirst for rapid advancements in technological development and expertise in the fields of advanced design and manufacturing, especially at their interfaces.

Manufacturing industry has been one of the key drivers for recent rapid global economic development. Globalisation of manufacturing industries due to distributed design and labour advantage leads to a drive and thirst for technological advancements and expertise in the fields of advanced design and manufacturing.

Recent rapid globalisation of manufacturing industries leads to a drive and thirst for rapid advancements in technological development and expertise in the fields of advanced design and manufacturing, especially at their interfaces. This development results in many economical benefits to and improvement of quality of life for many people all over the world. Technically speaking, this rapid development also create many opportunities and challenges for both industrialists and academics, as the design requirements and constraints have completely changed in this global design and manufacture environment. Consequently the way to design, manufacture and realise products have changed as well. The days of designing for a local market and using local suppliers in manufacturing have gone, if enterprises aim to maintain their competitiveness and global expansion leading to further success. In this global context and scenario, both industry and the academia have an urgent need to equip themselves with the latest knowledge, technology and methods developed for engineering design and manufacture. To address this shift in engineering design and manufacture, supported by the European Commission under the Asia Link Programme with a project title FASTAHEAD (A Framework Approach to Strengthening Asian Higher Education in Advanced Design and Manufacture), three key project partners, namely the University of Strathclyde of the United Kingdom, Northwestern Polytechncial University of China, and the Troyes University of Technology of France organised a third international conference.

Recent rapid globalisation of manufacturing industries leads to a drive and thirst for rapid advancements in technological development and expertise in the fields of advanced design and manufacturing, especially at their interfaces. This development results in many economical benefits to and improvement of quality of life for many people all over the world. Technically speaking, this rapid development also create many opportunities and challenges for both industrialists and academics, as the design requirements and constraints have completely changed in this global design and manufacture environment. Consequently the way to design, manufacture and realise products have changed as well. The days of designing for a local market and using local suppliers in manufacturing have gone, if enterprises aim to maintain their competitiveness and global expansion leading to further success. In this global context and scenario, both industry and the academia have an urgent need to equip themselves with the latest knowledge, technology and methods developed for engineering design and manufacture. To address this shift in engineering design and manufacture, supported by the European Commission under the Asia Link Programme with a project title FASTAHEAD (A Framework Approach to Strengthening Asian Higher Education in Advanced Design and Manufacture), three key project partners, namely the University of Strathclyde of the United Kingdom, Northwestern Polytechncial University of China, and the Troyes University of Technology of France organised a third international conference.

Manufacturing industry has been one of the key drivers for recent rapid global economic development. Globalisation of manufacturing industries due to distributed design and labour advantage leads to a drive and thirst for technological advancements and expertise in the fields of advanced design and manufacturing. This development results in many economical benefits to and improvement of quality of life for many people all over the world. This rapid development also creates many opportunities and challenges for both industrialists and academics, as the design requirements and constraints have completely changed in this global design and manufacture environment. Consequently the way to design, manufacture and realise products have changed as well. More and more design and manufacture tasks can now be undertaken within computer environment using simulation and virtual reality technologies. These technological advancements hence support more advanced product development and manufacturing operations in such a global design and manufacturing environment. In this global context and scenario, both industry and the academia have an urgent need to equip themselves with the latest knowledge, technology and methods developed for engineering design and manufacture.

Manufacturing industry has been one of the key drivers for recent rapid global economic development. Globalisation of manufacturing industries due to distributed design and labour advantage leads to a drive and thirst for technological advancements and expertise in the fields of advanced design and manufacturing. This development results in many economical benefits to and improvement of quality of life for many people all over the world. This rapid development also creates many opportunities and challenges for both industrialists and academics, as the design requirements and constraints have completely changed in this global design and manufacture environment. Consequently the way to design, manufacture and realise products have changed as well. More and more design and manufacture tasks can now be undertaken within computer environment using simulation and virtual reality technologies. These technological advancements hence support more advanced product development and manufacturing operations in such a global design and manufacturing environment. In this global context and scenario, both industry and the academia have an urgent need to equip themselves with the latest knowledge, technology and methods developed for engineering design and manufacture.

This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 2–4, 2020. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is organized into four main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.

This 2-volume set constitutes the post proceedings of the 22nd IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2025, which took place in Seville, Spain, July 2025.The 79 full papers presented in this volume were carefully reviewed and selected from 143 submissions. The papers are organized in the following topical sections:Part I: Digital Twin and Smart Systems; AI and Data-Driven Innovation; Sustainable and Circular Product Lifecycle.Part II: Model-Based Engineering (MBE) and System Engineering; Organizational Transformation and Strategy; Interoperability and Integration Technologies; Human-Centric and Educational Innovation.

This 2-volume set constitutes the post proceedings of the 22nd IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2025, which took place in Seville, Spain, July 2025.The 79 full papers presented in this volume were carefully reviewed and selected from 143 submissions. The papers are organized in the following topical sections:Part I: Digital Twin and Smart Systems; AI and Data-Driven Innovation; Sustainable and Circular Product Lifecycle.Part II: Model-Based Engineering (MBE) and System Engineering; Organizational Transformation and Strategy; Interoperability and Integration Technologies; Human-Centric and Educational Innovation.

This 2-volume set constitutes the post proceedings of the 22nd IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2025, which took place in Seville, Spain, July 2025.The 79 full papers presented in this volume were carefully reviewed and selected from 143 submissions. The papers are organized in the following topical sections:Part I: Digital Twin and Smart Systems; AI and Data-Driven Innovation; Sustainable and Circular Product Lifecycle.Part II: Model-Based Engineering (MBE) and System Engineering; Organizational Transformation and Strategy; Interoperability and Integration Technologies; Human-Centric and Educational Innovation.

This 2-volume set constitutes the post proceedings of the 22nd IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2025, which took place in Seville, Spain, July 2025.The 79 full papers presented in this volume were carefully reviewed and selected from 143 submissions. The papers are organized in the following topical sections:Part I: Digital Twin and Smart Systems; AI and Data-Driven Innovation; Sustainable and Circular Product Lifecycle.Part II: Model-Based Engineering (MBE) and System Engineering; Organizational Transformation and Strategy; Interoperability and Integration Technologies; Human-Centric and Educational Innovation.

Covering key topics in the fieldsuch as technological innovation, human-centered sustainable engineering andmanufacturing, and manufacture at a global scale in a virtual world, this bookaddresses both advanced techniques and industrial applications of key researchin interactive design and manufacturing. Featuring the full papers presented atthe 2014 Joint Conference on Mechanical Design Engineering and AdvancedManufacturing, which took place in June 2014 in Toulouse, France, it presentsrecent research and industrial success stories related to implementinginteractive design and manufacturing solutions.

This book constitutes the refereed proceedings of the 12th IFIP WG 5.1 International Conference on  Product Lifecycle Management, PLM 2015, held in Doha, Qatar, in October 2015. The 79 revised full papers were carefully reviewed and selected from 130 submissions. The papers are organized in the following topical sections: smart products, assessment approaches, PLM maturity, building information modeling (BIM), languages and ontologies, product service systems, future factory, knowledge creation and management, simulation and virtual environments, sustainability and systems improvement, configuration and engineering change, education studies, cyber-physical and smart systems, design and integration issues, and PLM processes and applications.

This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

This book constitutes the refereed proceedings of the 13th IFIP WG 5.1 International Conference on  Product Lifecycle Management, PLM 2016, held in Columbia, SC, USA, in July 2016. The 57 revised full papers presented were carefully reviewed and selected from 77 submissions. The papers are organized in the following topical sections: knowledge sharing, re-use and preservation; collaborative development architectures; interoperability and systems integration; lean product development and the role of PLM; PLM and innovation; PLM tools; cloud computing and PLM tools; traceability and performance; building information modeling; big data analytics and business intelligence; information lifecycle management; industry 4.0; metrics, standards and regulation; and product, service and systems.

This book constitutes the refereed proceedings of the 13th IFIP WG 5.1 International Conference on  Product Lifecycle Management, PLM 2016, held in Columbia, SC, USA, in July 2016. The 57 revised full papers presented were carefully reviewed and selected from 77 submissions. The papers are organized in the following topical sections: knowledge sharing, re-use and preservation; collaborative development architectures; interoperability and systems integration; lean product development and the role of PLM; PLM and innovation; PLM tools; cloud computing and PLM tools; traceability and performance; building information modeling; big data analytics and business intelligence; information lifecycle management; industry 4.0; metrics, standards and regulation; and product, service and systems.

Covering key topics in the fieldsuch as technological innovation, human-centered sustainable engineering andmanufacturing, and manufacture at a global scale in a virtual world, this bookaddresses both advanced techniques and industrial applications of key researchin interactive design and manufacturing. Featuring the full papers presented atthe 2014 Joint Conference on Mechanical Design Engineering and AdvancedManufacturing, which took place in June 2014 in Toulouse, France, it presentsrecent research and industrial success stories related to implementinginteractive design and manufacturing solutions.