D.F.G. Durão - Böcker

Much has been said and written about the abilities of modern instrumentation to help solve problems of combustion in engines. In the main, however, the design and fabr ication of combustion chambers continues to be based on extrapolation of exper ience gained from use and rig tests, with little input from advanced techniques such as those based on optical diagnotics. At the same time, it has become increasingly difficult to design better combustion chambers without knowledge of the relevant flow processes. Thus, the future must involve improved understanding which, in turn, will require detailed measurements of velocity, temperature and concentration. The need to narrow the gap between current industrial practice and the acquisition and implementation of improved techniques motivated the organization of the Advanced Study Institute upon which this volume is based. This Institute on Instrumentation for Combustion and Flow in Engines was arranged to display the needs of industry and the possibilities made available by modern instrumentation and, at the same time, to make clear the relative advantages of optical and probe techniques. Held at Vimeiro during the period from 13 to 26 September, 1987, the Institute was attended by 120 participants and 16 invited lecturers.

This book consists of papers prepared for and presented at a NATO sponsored Advanced Study Institute which was held in Montechoro, Portugal during the period 16-27 April, 1990. This Institute was attended by approximately ninety delegates from fifteen countries and followed from a related Institute held in Vimeiro, Portugal in 1987 (see the book entitled "Instrumentation for Combustion and Flow in Engines", edited by D. F. G. Dur~o, J. H. Whitelaw and P. O. Witzel. The purposes of the first Institute related closely to instrumentation for use in gas-turbine combustors and the cylinders of internal-combustion engines. These topics were also addressed in the second Institute, though in a manner which was wider ranging and chosen to demonstrate and explain the development and application of measurement methods to combusting flows in general. The papers contained in this boo~ were selected to provide the reader with a comprehensive and up-to-date view of the variety of experimental techniques available to measure in combusting flows. Included are discussions of their range and applicability, potential accuracy and ease of use. Thus, the first paper provides a brief overview and the second an indication of those aspects of combustion which should influence the choice of flow property to be measured and the technique to be used.

This volume includes revised and extended versions of selected papers presented at the Tenth International Symposium on Applications of Laser Techniques to Fluid Mechanics held in Lisbon in July 2000.The papers describe instrumentation developments for velocity, scalar and multiphase flows and results of measurements of turbulent flows, and combustion and engines. Focus is placed on laser-Doppler anemometry, particle sizing and other methods for the measurement of velocity and scalars, such as particle image velocimetry and laser induced fluorescence. The application of laser techniques to scientific and engineering fluid flow research was emphasized, but contributions to the theory and practice of laser were also considered where they facilitate new improved fluid mechanic research.

In the tradition of its predecessors, this volume comprises a selection of the best papers presented at the Ninth International Symposium on Applications of Laser Techniques to Fluid Mechanics, held in Lisbon in July 2000. The papers reflect the state-of-the-art in laser applications of laser techniques in fluid mechanics describing novel ideas for instrumentation, instrumentation developments, results of measurements of wall-bounded flows, free flows and flames and flow and combustion in engines. The papers demonstrate the continuing interest in the development of an understanding of new methodologies and implementation in terms of new instrumentation.

This volume includes revised and extended versions of selected papers presented at the Tenth International Symposium on Applications of Laser Techniques to Fluid Mechanics held in Lisbon in July 2000.The papers describe instrumentation developments for velocity, scalar and multiphase flows and results of measurements of turbulent flows, and combustion and engines. Focus is placed on laser-Doppler anemometry, particle sizing and other methods for the measurement of velocity and scalars, such as particle image velocimetry and laser induced fluorescence. The application of laser techniques to scientific and engineering fluid flow research was emphasized, but contributions to the theory and practice of laser were also considered where they facilitate new improved fluid mechanic research.

In the tradition of its predecessors, this volume comprises a selection of the best papers presented at the Ninth International Symposium on Applications of Laser Techniques to Fluid Mechanics, held in Lisbon in July 2000.The papers reflect the state-of-the-art in laser applications of laser techniques in fluid mechanics describing novel ideas for instrumentation, instrumentation developments, results of measurements of wall-bounded flows, free flows and flames and flow and combustion in engines. The papers demonstrate the continuing interest in the development of an understanding of new methodologies and implementation in terms of new instrumentation.

This volume comprises a selection of the best papers presented at the Eighth International Symposium on Applications of Laser Techniques to Fluid Mechanics, held in Lisbon in July 1996.The papers describe novel ideas for instrumentation, instrumentation developments, results of measurements of wall-bounded flows, free flows and flames and flow and combustion in engines. The papers demonstrate the continuing interest in the development of an understanding of new methodologies and implementation in terms of new instrumentation.

This volume consists of papers selected from the proceedings of the Fifth International Symposium on Applications of Laser Techniques to Fluid Mechanics, held at the Calouste Gulbenkian Foundation in Lisbon from 9 to 12 July, 1990. Relative to previous meetings in the Lisbon series the scope of this symposium was broadened by expanding the topical coverage to include all laser techniques used in fluid mechanics. This change recognized the trend amongst experimental fluid dynamicists to employ laser techniques for the mea­ surement of many different quantities, including concentration, temperature, particle size, and velocity, and the need for researchers to have a forum in which to communicate their work and share their common interests. The Fifth Symposium contained twenty-three sessions of formal presentations and a lively Open Forum ses­ sion. In addition, Dr. H. J. Pfeiffer organized a special Workshop on the Use of Computers in Flow Mea­ surements which contained five sessions on frequency domain processors, correIa tors, special detectors, and biasing.

This volume comprises a selection of the best papers presented at the Seventh Interna­ tional Symposium on Applications of Laser Techniques to Fluid Mechanics held at The Calouste Gulbenkian Foundation in Lisbon, during the period of July 11 to 14,1994. The papers describe Applications to Fluid Mechanics, Applications to Combustion, Instrumentation for Velocity and Size Measurements and Instrumentation for Whole­ Field Velocity and demonstrate the continuing and healthy interest in the development of understanding of the methodology and implementation in terms of new instru­ mentation. The prime objective of this Seventh Symposium was to provide a forum for the presen­ tation of the most advanced research on laser techniques for flow measurements, and communicate significant results to fluid mechanics. The applications oflaser techniques to scientific and engineering fluid flow research was emphasized, but contributions to the theory and practice of laser methods were also considered where they facilitate new improved fluid mechanic research. Attention was placed on laser-Doppler anemometry, particle sizing and other methods for the measurement of velocity and scalar, such as particle image velocimetry and laser induced fluorescence. We would like to take this opportunity to thank those who participated. The assistance provided by the Advisory Committee, by assessing abstracts was highly appreciated.

This volume contains papers selected from contributions made to the Fourth Symposium on "Applications of Laser Anemometry". It is divided into three chapters concerned respectively with single-phase flows, two-phase flows and instrumentation. In the first chapter, the papers are concerned with fundamental investigations of shear flows as well as important applications including the Earth's boundary layer and internal combustion engines. The two-phase flows include applications of amplitude- and phase-based techniques to the sprays of Diesel and gas-turbine engines and to a fluidised bed and slurry flows. The new instrumentation includes miniature and multipoint LDV arrangements, PIDV and photochromic visualisation as well as improved explanations of laser-based systems.

For this sixth volume 01 proceedings stemming lrom a Symposium on the Applications 01 Laser Techniques to Fluid Techniques, we have selected thirty one papers which are presented in live chapters. They represent some 01 the best papers presented at the Sixth Symposium which was again held at the Calouste Gulbenkian Foundation in Lisbon, this time lrom 20 to 23 July 1992. The total number of papers at the Symposium was slightly larger than in 1990 and was selected from a much increased number of abstracts, with a considerably smaller of accepted manuscripts. Thus, this volume represents some 01 the best 01 the best. The topics we have chosen to include are Laser Anemometer Optics and Processing, Two-Phase Flow Instrumentation, Whole-Field Velocimetry, Complex Flow Applications and Engine and Combusting Flows, and they show that there continues to be a healthy interest in the development 01 understanding of the methodology and its implementation in terms 01 new instrumentation, and this is emphasised by the increasing number 01 companies which have attended the Symposium in recent years in order to demonstrate their range 01 products. At the same time, it is clear that there is an increasing range of applications 01 the corresponding laser techniques and this is represented, in part, by the chapters concerned with Complex and Engine and Combusting Flows. In general, we are very pleased with the way the application 01 laser techniques has grown and hope that this se ries 01 Symposia has played its part.

This book consists of papers prepared for and presented at a NATO sponsored Advanced Study Institute which was held in Montechoro, Portugal during the period 16-27 April, 1990. This Institute was attended by approximately ninety delegates from fifteen countries and followed from a related Institute held in Vimeiro, Portugal in 1987 (see the book entitled "Instrumentation for Combustion and Flow in Engines", edited by D. F. G. Dur~o, J. H. Whitelaw and P. O. Witzel. The purposes of the first Institute related closely to instrumentation for use in gas-turbine combustors and the cylinders of internal-combustion engines. These topics were also addressed in the second Institute, though in a manner which was wider ranging and chosen to demonstrate and explain the development and application of measurement methods to combusting flows in general. The papers contained in this boo~ were selected to provide the reader with a comprehensive and up-to-date view of the variety of experimental techniques available to measure in combusting flows. Included are discussions of their range and applicability, potential accuracy and ease of use. Thus, the first paper provides a brief overview and the second an indication of those aspects of combustion which should influence the choice of flow property to be measured and the technique to be used.