Fakher Chaari - Böcker
Visar alla böcker från författaren Fakher Chaari. Handla med fri frakt och snabb leverans.
52 produkter
52 produkter
Del 13 - Applied Condition Monitoring
Advances in Acoustics and Vibration II
Proceedings of the Second International Conference on Acoustics and Vibration (ICAV2018), March 19-21, 2018, Hammamet, Tunisia
Häftad, Engelska, 2018
2 118 kr
Skickas inom 10-15 vardagar
The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration.
Del 12 - Applied Condition Monitoring
Rotating Machinery and Signal Processing
Proceedings of the First Workshop on Signal Processing Applied to Rotating Machinery Diagnostics, SIGPROMD’2017, April 09-11, 2017, Setif, Algeria
Häftad, Engelska, 2018
1 590 kr
Skickas inom 10-15 vardagar
This book provides readers with a timely snapshot of the potential offered by and challenges posed by signal processing methods in the field of machine diagnostics and condition monitoring. It gathers contributions to the first Workshop on Signal Processing Applied to Rotating Machinery Diagnostics, held in Setif, Algeria, on April 9-10, 2017, and organized by the Applied Precision Mechanics Laboratory (LMPA) at the Institute of Precision Mechanics, University of Setif, Algeria and the Laboratory of Mechanics, Modeling and Manufacturing (LA2MP) at the National School of Engineers of Sfax. The respective chapters highlight research conducted by the two laboratories on the following main topics: noise and vibration in machines; condition monitoring in non-stationary operations; vibro-acoustic diagnosis of machinery; signal processing and pattern recognition methods; monitoring and diagnostic systems; and dynamic modeling and fault detection.
Del 15 - Applied Condition Monitoring
Advances in Condition Monitoring of Machinery in Non-Stationary Operations
Proceedings of the 6th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO’2018, 20-22 June 2018, Santander, Spain
Inbunden, Engelska, 2019
2 329 kr
Skickas inom 10-15 vardagar
This book is aimed at researchers, industry professionals and students interested in the broad ranges of disciplines related to condition monitoring of machinery working in non-stationary conditions. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO’2018, held on June 20 – 22, 2018, in Santander, Spain. The book describes both theoretical developments and a number of industrial case studies, which cover different topics, such as: noise and vibrations in machinery, conditioning monitoring in non-stationary operations, vibro-acoustic diagnosis of machinery, signal processing, application of pattern recognition and data mining, monitoring and diagnostic systems, faults detection, dynamics of structures and machinery, and mechatronic machinery diagnostics.
Computational Methods and Experimental Testing In Mechanical Engineering
Selected Papers from the 6th Algerian Congress on Mechanics, CAM 2017, November 26-30, 2017, Constantine, Algeria
Häftad, Engelska, 2019
1 590 kr
Skickas inom 10-15 vardagar
This book covers a variety of topics in mechanics, with a special emphasis to fluid mechanics and energy transfer. Further topics include methods for maintenance of mechanical structures, strength, wear, fracture, damage and life of structures, and image processing solutions for the design and 3D manufacturing of mechanical parts.
Del 16 - Applied Condition Monitoring
Cyclostationarity: Theory and Methods – IV
Contributions to the 10th Workshop on Cyclostationary Systems and Their Applications, February 2017, Grodek, Poland
Inbunden, Engelska, 2019
1 590 kr
Skickas inom 10-15 vardagar
This book gathers contributions presented at the 10th Workshop on Cyclostationary Systems and Their Applications, held in Gródek nad Dunajcem, Poland in February 2017.
Del 16 - Applied Condition Monitoring
Cyclostationarity: Theory and Methods – IV
Contributions to the 10th Workshop on Cyclostationary Systems and Their Applications, February 2017, Grodek, Poland
Häftad, Engelska, 2020
1 590 kr
Skickas inom 10-15 vardagar
This book gathers contributions presented at the 10th Workshop on Cyclostationary Systems and Their Applications, held in Gródek nad Dunajcem, Poland in February 2017.
1 590 kr
Skickas inom 10-15 vardagar
This book reports on cutting-edge findings concerning characterization of material behavior, material modeling and simulation, and applications in the field of manufacturing. Based on the second International Conference on Advanced Materials Mechanics & Manufacturing, A3M2018, organized by the Laboratory of Mechanics, Modeling and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia, the book covers a variety of topics, such as experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. It offers a timely snapshot on current research and applications, offering a bridge to facilitate communication and collaboration between academic and industrial researchers.
Design and Modeling of Mechanical Systems - IV
Proceedings of the 8th Conference on Design and Modeling of Mechanical Systems, CMSM'2019, March 18–20, Hammamet, Tunisia
Häftad, Engelska, 2020
2 118 kr
Skickas inom 10-15 vardagar
CMSM’2019 was jointly organized by two leading Tunisian research laboratories: the Mechanical Engineering Laboratory of the National Engineering School of Monastir,University of Monastir and the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax, University of Sfax.
Mechatronics 4.0
Proceedings of the First International Workshop on Mechatronics 4.0, June 8–9, 2019, Mahdia, Tunisia
Häftad, Engelska, 2020
1 073 kr
Skickas inom 10-15 vardagar
This book gathers original findings, both theoretical and experimental, related to various cutting-edge topics in the design and modeling of mechatronic systems, including multiphysics problems.
Advances in Integrated Design and Production
Proceedings of the 11th International Conference on Integrated Design and Production, CPI 2019, October 14-16, 2019, Fez, Morocco
Häftad, Engelska, 2020
1 590 kr
Skickas inom 10-15 vardagar
It covers cutting-edge design, modeling and control of dynamic and multiphysics systems, knowledge management systems in industry 4.0, cyber-physical production systems, additive and sustainable manufacturing and many other related topics.
Del 17 - Applied Condition Monitoring
Advances in Acoustics and Vibration III
Proceedings of the Third International Conference on Acoustics and Vibration (ICAV2021), March 15-16, 2021
Inbunden, Engelska, 2021
2 435 kr
Skickas inom 10-15 vardagar
The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration.
Del 19 - Applied Condition Monitoring
Smart Monitoring of Rotating Machinery for Industry 4.0
Inbunden, Engelska, 2021
1 590 kr
Skickas inom 10-15 vardagar
This book offers an overview of current methods for the intelligent monitoring of rotating machines. It describes the foundations of smart monitoring, guiding readers to develop appropriate machine learning and statistical models for answering important challenges, such as the management and analysis of a large volume of data.
Del 19 - Applied Condition Monitoring
Smart Monitoring of Rotating Machinery for Industry 4.0
Häftad, Engelska, 2022
1 590 kr
Skickas inom 10-15 vardagar
This book offers an overview of current methods for the intelligent monitoring of rotating machines. It describes the foundations of smart monitoring, guiding readers to develop appropriate machine learning and statistical models for answering important challenges, such as the management and analysis of a large volume of data.
Del 18 - Applied Condition Monitoring
Nonstationary Systems: Theory and Applications
Contributions to the 13th Workshop on Nonstationary Systems and Their Applications, February 3-5, 2020, Grodek nad Dunajcem, Poland
Häftad, Engelska, 2022
1 590 kr
Skickas inom 10-15 vardagar
This book offers an overview of current and recent methods for the analysis of the nonstationary processes, focusing on cyclostationary systems that are ubiquitous in various application fields.
Del 18 - Applied Condition Monitoring
Nonstationary Systems: Theory and Applications
Contributions to the 13th Workshop on Nonstationary Systems and Their Applications, February 3-5, 2020, Grodek nad Dunajcem, Poland
Inbunden, Engelska, 2021
1 590 kr
Skickas inom 10-15 vardagar
This book offers an overview of current and recent methods for the analysis of the nonstationary processes, focusing on cyclostationary systems that are ubiquitous in various application fields.
Advances in Materials, Mechanics and Manufacturing II
Proceedings of the Third International Conference on Advanced Materials, Mechanics and Manufacturing (A3M’2021), March 25-27, 2021
Häftad, Engelska, 2021
1 802 kr
Skickas inom 10-15 vardagar
This book reports on innovative materials research with a special emphasis on methods, modeling, and simulation tools for analyzing material behavior, emerging materials, and composites, and their applications in the field of manufacturing.
Del 20 - Applied Condition Monitoring
Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency
Contributions to the First International Workshop on Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency, MOSCOSSEE’2021, February 25-26, 2021
Inbunden, Engelska, 2021
1 907 kr
Skickas inom 10-15 vardagar
This book provides readers with an overview of recent theories and methods for studying complex mechanical systems used in energy production, such as wind turbines, but not limited to them. The emphasis is put on strategies for increasing energy efficiency, and on recent industrial applications. Topics cover dynamics and vibration, vibroacoustics, engineering design, modelling and simulation, fault diagnostics, signal processing and prognostics. The book is based on peer-review contributions and invited talks presented at the first International Workshop on MOdelling and Simulation of COmplex Systems for Sustainable Energy Efficiency, MOSCOSSEE 2021, held online on February 25-26, 2021, and organized by the LAboratory of Mechanics, Modelling and Production (LA2MP) from University of Sfax, Tunisia and the Department of Mechanical and Aeronautical engineering, Centre of Asset Integrity Management (C-AIM) from University of Pretoria, South Africa. By offering authoritative information on innovative methods and tools for application in renewable energy production, it provides a valuable resource to both academics and professionals, and a bridge to facilitate communication between the two groups.
Del 20 - Applied Condition Monitoring
Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency
Contributions to the First International Workshop on Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency, MOSCOSSEE’2021, February 25-26, 2021
Häftad, Engelska, 2022
1 907 kr
Skickas inom 10-15 vardagar
This book provides readers with an overview of recent theories and methods for studying complex mechanical systems used in energy production, such as wind turbines, but not limited to them. The emphasis is put on strategies for increasing energy efficiency, and on recent industrial applications. Topics cover dynamics and vibration, vibroacoustics, engineering design, modelling and simulation, fault diagnostics, signal processing and prognostics. The book is based on peer-review contributions and invited talks presented at the first International Workshop on MOdelling and Simulation of COmplex Systems for Sustainable Energy Efficiency, MOSCOSSEE 2021, held online on February 25-26, 2021, and organized by the LAboratory of Mechanics, Modelling and Production (LA2MP) from University of Sfax, Tunisia and the Department of Mechanical and Aeronautical engineering, Centre of Asset Integrity Management (C-AIM) from University of Pretoria, South Africa. By offering authoritative information on innovative methods and tools for application in renewable energy production, it provides a valuable resource to both academics and professionals, and a bridge to facilitate communication between the two groups.
Design and Modeling of Mechanical Systems - V
Proceedings of the 9th Conference on Design and Modeling of Mechanical Systems, CMSM'2021, December 20-22, 2021, Hammamet, Tunisia
Häftad, Engelska, 2022
2 435 kr
Skickas inom 10-15 vardagar
This book offers a collection of original peer-reviewed contributions presented at the 9th International Congress on Design and Modeling of Mechanical Systems (CMSM’2021), held on December 20-22, 2021, in Hammamet, Tunisia.
Advances in Integrated Design and Production II
Proceedings of the 12th International Conference on Integrated Design and Production, CPI 2022, May 10–12, 2022, ENSAM, Rabat, Morocco
Häftad, Engelska, 2023
2 329 kr
Skickas inom 10-15 vardagar
This book reports on innovative concepts and practical solutions at the intersection between engineering design, production and industrial management. It covers cutting-edge design, modeling and control of dynamic and multiphysics systems, knowledge management systems in industry 4.0, cyber-physical production systems, additive and sustainable manufacturing and many other related topics. It also highlights important collaborative works between different countries and between industry and universities. Gathering the proceedings of the 12th International Conference on Integrated Design and Production, CPI 2022, held on May 10-12, 2022, at École Nationale Supérieure d'Arts et Métiers (ENSAM), in Rabat, Morocco, this book gathers carefully peer-reviewed chapters, with extensive information for researchers and professionals in the broad area of engineering design, production and management.
Del 21 - Applied Condition Monitoring
Advances in Technical Diagnostics II
Proceedings of the 7th International Congress on Technical Diagnostics, ICTD 2022, 14–16 September 2022, Radom, Poland
Inbunden, Engelska, 2023
2 329 kr
Skickas inom 10-15 vardagar
This book reports on recent theories and methods for diagnostics and condition monitoring of machines, materials and industrial processes, with a special emphasis on the application of artificial intelligence and intelligent control systems. Gathering original contributions to the 7th International Congress on Technical Diagnostics, ICTD2022, held on September 14–16, 2022, in Radom, Poland, this book offers extensive information on the latest trends in machine diagnostics and on IoT, smart sensors and machine learning technology in advanced condition monitoring. It addresses both scientists and professionals and is intended to foster communication and collaborations between the two groups.
Del 21 - Applied Condition Monitoring
Advances in Technical Diagnostics II
Proceedings of the 7th International Congress on Technical Diagnostics, ICTD 2022, 14–16 September 2022, Radom, Poland
Häftad, Engelska, 2024
2 329 kr
Skickas inom 10-15 vardagar
This book reports on recent theories and methods for diagnostics and condition monitoring of machines, materials and industrial processes, with a special emphasis on the application of artificial intelligence and intelligent control systems.
Del 22 - Applied Condition Monitoring
Advances in Acoustics and Vibration IV
Proceedings of the Fourth International Conference on Acoustics and Vibration (ICAV2022), December 19-21, 2022, Sousse, Tunisia
Inbunden, Engelska, 2023
2 329 kr
Skickas inom 10-15 vardagar
The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the Fourth International Conference on Acoustics and Vibration (ICAV2022), which was organized by the Tunisian Association of Industrial Acoustics and Vibration (ATAVI) and held in hybrid format on December 19–21, 2022, in and from Sousse, Tunisia. The contributions cover advances in both theory and practice in a variety of subfields, such as structural and machine dynamics and vibrations, fault diagnosis and prognosis, nonlinear dynamics, and vibration control of mechatronic systems. Further topics include fluid–structure interaction, computational vibro-acoustics, vibration field measurements, and dynamic behavior of materials. This book provides a valuable resource for both academics and professionals dealing with diverse issues in applied mechanics. By combining advanced theories with industrial issues, it is expected to facilitate communication and collaboration between different groups of researchers and technology users.
Del 22 - Applied Condition Monitoring
Advances in Acoustics and Vibration IV
Proceedings of the Fourth International Conference on Acoustics and Vibration (ICAV2022), December 19-21, 2022, Sousse, Tunisia
Häftad, Engelska, 2024
2 329 kr
Skickas inom 10-15 vardagar
The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration.
Advances in Mechanics
Selected Contributions to the 15th International Moroccan Congress of Mechanics, May 24-27, 2022, CMM 2022, Casablanca, Morocco
Häftad, Engelska, 2023
1 802 kr
Skickas inom 7-10 vardagar
It gathers the best papers presented at 15th International Moroccan Congress of Mechanics "Congrès de Mécanique", CMM 2022, held on May 24-27, 2022, in Casablanca, Morocco, and organized by the Moroccan Society of Mechanics (SMSM) and the Faculty of Science Ain Chock of the University of Hassan II, Casablanca, Morocco.
Advances in Applied Mechanics
Proceedings of The Eleventh International Congress for Applied Mechanics (JET’2022), November 16-18, 2022, Marrakech, Morocco
Häftad, Engelska, 2023
2 118 kr
Skickas inom 10-15 vardagar
This book reports on advances in applied mechanics research and applications. The congress was organized by the Franco-Maghreb Association of Mechanics and Materials (AF3M) with the close collaboration of the Moroccan Society of Mechanical Sciences (SMSM).
2 118 kr
Skickas inom 10-15 vardagar
This book reports on innovative materials research with a special emphasis on methods, modeling, and simulation tools for analyzing material behavior, emerging materials, and composites, and their applications in manufacturing and automotive, among others. It gathers the proceedings of the fourth International Conference on Advanced Materials Mechanics and Manufacturing, A3M2023, held on March 20-21, 2023, in Sousse, Tunisia, and organized by the Laboratory of Mechanics, Modeling, and Manufacturing (LA2MP) of the National School of Engineers of Sfax. The book covers findings from experimental analyses and numerical simulations of material behavior, characterization of new materials, structures and composites, optimization methods and Artifical Intelligence applications. Offering a good balance of fundamental research and practice-oriented findings, it provides researchers and professionals with a timely snapshot of engineering methods in mechanics, materials and manufacturing.
2 118 kr
Skickas inom 10-15 vardagar
This book offers a collection of original peer-reviewed contributions presented at the 10th International Congress on Design and Modeling of Mechanical Systems (CMSM’2023), held on December 18-20, 2023, in Hammamet, Tunisia.
2 329 kr
Skickas inom 10-15 vardagar
This book offers a collection of original peer-reviewed contributions presented at the 10th International Congress on Design and Modeling of Mechanical Systems (CMSM’2023), held on December 18-20, 2023, in Hammamet, Tunisia.
540 kr
Skickas inom 10-15 vardagar
In the last decade the research in signal analysis was dominated by models that encompass nonstationarity as an important feature. This book presents the results of a workshop held in Grodek—Poland in February 2013 which was dedicated to the investigation of cyclostationary signals. Its main objective is to highlight the strong interactions between theory and applications of cyclostationary signals with the use of modern statistical tools.An important application of cyclostationary signals is the analysis of mechanical signals generated by a vibrating mechanism. Cyclostationary models are very important to perform basic operations on signals in both time and frequency domains. One of the fundamental problems in diagnosis of rotating machine is the identification of significant modulating frequencies that contribute to the cyclostationary nature of the signals. The book shows that there are modern tools available for analyzing cyclostationary signals without the assumption of gaussianity. Those methods are based on the ideas of bootstrap, subsampling and Fraction-of-time (FOT) models. The book is organised in two parts. The first part will be dedicated to pure theory on cyclostationarity. Applications are presented in the second part including several mechanical systems such as bearings, gears, with or without damages.