Mohamed Haddar – författare
Visar alla böcker från författaren Mohamed Haddar. Handla med fri frakt och snabb leverans.
45 produkter
45 produkter
Del 13 - Applied Condition Monitoring
Advances in Acoustics and Vibration II
Proceedings of the Second International Conference on Acoustics and Vibration (ICAV2018), March 19-21, 2018, Hammamet, Tunisia
Häftad, Engelska, 2018
2 156 kr
Skickas inom 10-15 vardagar
The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration.
Del 12 - Applied Condition Monitoring
Rotating Machinery and Signal Processing
Proceedings of the First Workshop on Signal Processing Applied to Rotating Machinery Diagnostics, SIGPROMD’2017, April 09-11, 2017, Setif, Algeria
Häftad, Engelska, 2018
1 619 kr
Skickas inom 10-15 vardagar
This book provides readers with a timely snapshot of the potential offered by and challenges posed by signal processing methods in the field of machine diagnostics and condition monitoring. It gathers contributions to the first Workshop on Signal Processing Applied to Rotating Machinery Diagnostics, held in Setif, Algeria, on April 9-10, 2017, and organized by the Applied Precision Mechanics Laboratory (LMPA) at the Institute of Precision Mechanics, University of Setif, Algeria and the Laboratory of Mechanics, Modeling and Manufacturing (LA2MP) at the National School of Engineers of Sfax. The respective chapters highlight research conducted by the two laboratories on the following main topics: noise and vibration in machines; condition monitoring in non-stationary operations; vibro-acoustic diagnosis of machinery; signal processing and pattern recognition methods; monitoring and diagnostic systems; and dynamic modeling and fault detection.
Del 15 - Applied Condition Monitoring
Advances in Condition Monitoring of Machinery in Non-Stationary Operations
Proceedings of the 6th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO’2018, 20-22 June 2018, Santander, Spain
Inbunden, Engelska, 2019
2 371 kr
Skickas inom 10-15 vardagar
This book is aimed at researchers, industry professionals and students interested in the broad ranges of disciplines related to condition monitoring of machinery working in non-stationary conditions. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO’2018, held on June 20 – 22, 2018, in Santander, Spain. The book describes both theoretical developments and a number of industrial case studies, which cover different topics, such as: noise and vibrations in machinery, conditioning monitoring in non-stationary operations, vibro-acoustic diagnosis of machinery, signal processing, application of pattern recognition and data mining, monitoring and diagnostic systems, faults detection, dynamics of structures and machinery, and mechatronic machinery diagnostics.
Häftad, Engelska, 2019
1 619 kr
Skickas inom 10-15 vardagar
This book covers a variety of topics in mechanics, with a special emphasis to fluid mechanics and energy transfer. Further topics include methods for maintenance of mechanical structures, strength, wear, fracture, damage and life of structures, and image processing solutions for the design and 3D manufacturing of mechanical parts.
Häftad, Engelska, 2019
1 082 kr
Skickas inom 10-15 vardagar
This book reports on original theoretical and experimental findings related to a number of cutting-edge topics in mechanics and mechanical engineering, such as structure modelling and computation;
1 619 kr
Skickas inom 10-15 vardagar
This book reports on cutting-edge findings concerning characterization of material behavior, material modeling and simulation, and applications in the field of manufacturing. Based on the second International Conference on Advanced Materials Mechanics & Manufacturing, A3M2018, organized by the Laboratory of Mechanics, Modeling and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia, the book covers a variety of topics, such as experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. It offers a timely snapshot on current research and applications, offering a bridge to facilitate communication and collaboration between academic and industrial researchers.
Häftad, Engelska, 2020
2 156 kr
Skickas inom 10-15 vardagar
CMSM’2019 was jointly organized by two leading Tunisian research laboratories: the Mechanical Engineering Laboratory of the National Engineering School of Monastir,University of Monastir and the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax, University of Sfax.
Häftad, Engelska, 2020
1 082 kr
Skickas inom 10-15 vardagar
This book gathers original findings, both theoretical and experimental, related to various cutting-edge topics in the design and modeling of mechatronic systems, including multiphysics problems.
Häftad, Engelska, 2020
1 619 kr
Skickas inom 10-15 vardagar
It covers cutting-edge design, modeling and control of dynamic and multiphysics systems, knowledge management systems in industry 4.0, cyber-physical production systems, additive and sustainable manufacturing and many other related topics.
Del 17 - Applied Condition Monitoring
Advances in Acoustics and Vibration III
Proceedings of the Third International Conference on Acoustics and Vibration (ICAV2021), March 15-16, 2021
Inbunden, Engelska, 2021
2 479 kr
Skickas inom 10-15 vardagar
The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration.
Del 19 - Applied Condition Monitoring
Smart Monitoring of Rotating Machinery for Industry 4.0
Inbunden, Engelska, 2021
1 619 kr
Skickas inom 10-15 vardagar
This book offers an overview of current methods for the intelligent monitoring of rotating machines. It describes the foundations of smart monitoring, guiding readers to develop appropriate machine learning and statistical models for answering important challenges, such as the management and analysis of a large volume of data.
Del 19 - Applied Condition Monitoring
Smart Monitoring of Rotating Machinery for Industry 4.0
Häftad, Engelska, 2022
1 619 kr
Skickas inom 10-15 vardagar
This book offers an overview of current methods for the intelligent monitoring of rotating machines. It describes the foundations of smart monitoring, guiding readers to develop appropriate machine learning and statistical models for answering important challenges, such as the management and analysis of a large volume of data.
Häftad, Engelska, 2021
1 834 kr
Skickas inom 10-15 vardagar
This book reports on innovative materials research with a special emphasis on methods, modeling, and simulation tools for analyzing material behavior, emerging materials, and composites, and their applications in the field of manufacturing.
Del 20 - Applied Condition Monitoring
Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency
Contributions to the First International Workshop on Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency, MOSCOSSEE’2021, February 25-26, 2021
Inbunden, Engelska, 2021
1 941 kr
Skickas inom 10-15 vardagar
This book provides readers with an overview of recent theories and methods for studying complex mechanical systems used in energy production, such as wind turbines, but not limited to them. The emphasis is put on strategies for increasing energy efficiency, and on recent industrial applications. Topics cover dynamics and vibration, vibroacoustics, engineering design, modelling and simulation, fault diagnostics, signal processing and prognostics. The book is based on peer-review contributions and invited talks presented at the first International Workshop on MOdelling and Simulation of COmplex Systems for Sustainable Energy Efficiency, MOSCOSSEE 2021, held online on February 25-26, 2021, and organized by the LAboratory of Mechanics, Modelling and Production (LA2MP) from University of Sfax, Tunisia and the Department of Mechanical and Aeronautical engineering, Centre of Asset Integrity Management (C-AIM) from University of Pretoria, South Africa. By offering authoritative information on innovative methods and tools for application in renewable energy production, it provides a valuable resource to both academics and professionals, and a bridge to facilitate communication between the two groups.
Del 20 - Applied Condition Monitoring
Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency
Contributions to the First International Workshop on Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency, MOSCOSSEE’2021, February 25-26, 2021
Häftad, Engelska, 2022
1 941 kr
Skickas inom 10-15 vardagar
This book provides readers with an overview of recent theories and methods for studying complex mechanical systems used in energy production, such as wind turbines, but not limited to them. The emphasis is put on strategies for increasing energy efficiency, and on recent industrial applications. Topics cover dynamics and vibration, vibroacoustics, engineering design, modelling and simulation, fault diagnostics, signal processing and prognostics. The book is based on peer-review contributions and invited talks presented at the first International Workshop on MOdelling and Simulation of COmplex Systems for Sustainable Energy Efficiency, MOSCOSSEE 2021, held online on February 25-26, 2021, and organized by the LAboratory of Mechanics, Modelling and Production (LA2MP) from University of Sfax, Tunisia and the Department of Mechanical and Aeronautical engineering, Centre of Asset Integrity Management (C-AIM) from University of Pretoria, South Africa. By offering authoritative information on innovative methods and tools for application in renewable energy production, it provides a valuable resource to both academics and professionals, and a bridge to facilitate communication between the two groups.
Häftad, Engelska, 2022
2 479 kr
Skickas inom 10-15 vardagar
This book offers a collection of original peer-reviewed contributions presented at the 9th International Congress on Design and Modeling of Mechanical Systems (CMSM’2021), held on December 20-22, 2021, in Hammamet, Tunisia.
Häftad, Engelska, 2023
2 371 kr
Skickas inom 10-15 vardagar
This book reports on innovative concepts and practical solutions at the intersection between engineering design, production and industrial management. It covers cutting-edge design, modeling and control of dynamic and multiphysics systems, knowledge management systems in industry 4.0, cyber-physical production systems, additive and sustainable manufacturing and many other related topics. It also highlights important collaborative works between different countries and between industry and universities. Gathering the proceedings of the 12th International Conference on Integrated Design and Production, CPI 2022, held on May 10-12, 2022, at École Nationale Supérieure d'Arts et Métiers (ENSAM), in Rabat, Morocco, this book gathers carefully peer-reviewed chapters, with extensive information for researchers and professionals in the broad area of engineering design, production and management.
Del 22 - Applied Condition Monitoring
Advances in Acoustics and Vibration IV
Proceedings of the Fourth International Conference on Acoustics and Vibration (ICAV2022), December 19-21, 2022, Sousse, Tunisia
Inbunden, Engelska, 2023
2 371 kr
Skickas inom 10-15 vardagar
The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the Fourth International Conference on Acoustics and Vibration (ICAV2022), which was organized by the Tunisian Association of Industrial Acoustics and Vibration (ATAVI) and held in hybrid format on December 19–21, 2022, in and from Sousse, Tunisia. The contributions cover advances in both theory and practice in a variety of subfields, such as structural and machine dynamics and vibrations, fault diagnosis and prognosis, nonlinear dynamics, and vibration control of mechatronic systems. Further topics include fluid–structure interaction, computational vibro-acoustics, vibration field measurements, and dynamic behavior of materials. This book provides a valuable resource for both academics and professionals dealing with diverse issues in applied mechanics. By combining advanced theories with industrial issues, it is expected to facilitate communication and collaboration between different groups of researchers and technology users.
Del 22 - Applied Condition Monitoring
Advances in Acoustics and Vibration IV
Proceedings of the Fourth International Conference on Acoustics and Vibration (ICAV2022), December 19-21, 2022, Sousse, Tunisia
Häftad, Engelska, 2024
2 371 kr
Skickas inom 10-15 vardagar
The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration.
Häftad, Engelska, 2023
1 834 kr
Skickas inom 10-15 vardagar
It gathers the best papers presented at 15th International Moroccan Congress of Mechanics "Congrès de Mécanique", CMM 2022, held on May 24-27, 2022, in Casablanca, Morocco, and organized by the Moroccan Society of Mechanics (SMSM) and the Faculty of Science Ain Chock of the University of Hassan II, Casablanca, Morocco.
Häftad, Engelska, 2023
2 156 kr
Skickas inom 10-15 vardagar
This book reports on advances in applied mechanics research and applications. The congress was organized by the Franco-Maghreb Association of Mechanics and Materials (AF3M) with the close collaboration of the Moroccan Society of Mechanical Sciences (SMSM).
2 156 kr
Skickas inom 10-15 vardagar
This book reports on innovative materials research with a special emphasis on methods, modeling, and simulation tools for analyzing material behavior, emerging materials, and composites, and their applications in manufacturing and automotive, among others. It gathers the proceedings of the fourth International Conference on Advanced Materials Mechanics and Manufacturing, A3M2023, held on March 20-21, 2023, in Sousse, Tunisia, and organized by the Laboratory of Mechanics, Modeling, and Manufacturing (LA2MP) of the National School of Engineers of Sfax. The book covers findings from experimental analyses and numerical simulations of material behavior, characterization of new materials, structures and composites, optimization methods and Artifical Intelligence applications. Offering a good balance of fundamental research and practice-oriented findings, it provides researchers and professionals with a timely snapshot of engineering methods in mechanics, materials and manufacturing.
2 156 kr
Skickas inom 10-15 vardagar
This book offers a collection of original peer-reviewed contributions presented at the 10th International Congress on Design and Modeling of Mechanical Systems (CMSM’2023), held on December 18-20, 2023, in Hammamet, Tunisia.
2 371 kr
Skickas inom 10-15 vardagar
This book offers a collection of original peer-reviewed contributions presented at the 10th International Congress on Design and Modeling of Mechanical Systems (CMSM’2023), held on December 18-20, 2023, in Hammamet, Tunisia.
Häftad, Engelska, 2025
2 156 kr
Skickas inom 10-15 vardagar
This book reports on advances in applied mechanics research and applications. It covers methods, modeling, and simulation tools for products design, material behavior analysis, and for optimizing production processes. It also reports on cutting-edge techniques to increase performance of mechanical systems and foster energy transition. The book gathers selected contributions to the 12th International Congress for Applied Mechanics (JET’2024), held on November 13–15, 2024, in Marrakech, Morocco. The congress was organized by the Franco-Maghreb Association of Mechanics and Materials (AF3M) with the close collaboration of the Moroccan Society of Mechanical Sciences (SMSM). Overall, this book gives a special emphasis to theoretical and practical advances in mechanics, supporting sustainable and environmentally friendly development.
Del 23 - Applied Condition Monitoring
Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency II
Selected Contributions to the 2nd International Workshop on Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency, MOSCOSSEE’2024, November 2–3, 2024, Matmata, Gabes, Tunisia
Inbunden, Engelska, 2025
1 834 kr
Skickas inom 10-15 vardagar
Inbunden, Engelska, 2025
3 554 kr
Skickas inom 10-15 vardagar
This book reports on innovative concepts and practical solutions at the intersection between engineering design, applied mechanics, and production engineering. It covers cutting-edge design, modeling, and control of dynamic and multiphysics systems, advances in material engineering, and the assessment of additive manufacturing processes and products. It highlights topics relating to energy efficiency and sustainable development, and reports on applications of artificial intelligence in manufacturing. Gathering the proceedings of the 13th International Conference on Integrated Design and Production (CPI 2024), held on December 14-16, 2024, in Monastir, Tunisia, this book continues the tradition of the previous editions, providing a valuable resource for both academics and professionals dealing with diverse issues in applied mechanics. By combining advanced theories with industrial issues, it is also expected to facilitate communication and collaboration between different groups of researchers and technology users.
2 564 kr
Kommande
This book reports on research concerning methods, modeling, and simulation tools for material science and manufacturing. It covers emerging materials and composites, advanced machining, and applications in automotive and energy. It also highlights the use of machine learning for analyzing and optimizing the manufacturing process. Gathering the proceedings of the fifth International Conference on Advanced Materials Mechanics and Manufacturing, A3M2025, held on June 13-15, 2025, in Hammamet, Tunisia, and organized by the Laboratory of Mechanics, Modeling, and Manufacturing (LA2MP) of the National School of Engineers of Sfax, this book provides researchers and professionals with a timely snapshot of engineering methods in mechanics, materials and manufacturing. It also highlights important collaborative work between different countries and between industry and universities.
Häftad, Engelska, 2014
1 082 kr
Skickas inom 10-15 vardagar
The book offers a snapshot of the state-of-art in the field of model-based mechatronic system design. It covers topics including machine design and optimization, predictive systems in manufacturing networks, and the development of software for modeling and simulation of processes, which are supplemented by practical case studies. The book is a collection of fifteen selected contributions presented during the Workshop on Mechatronic Systems, held on March 17-19, 2014, in Mahdia, Tunisia. The workshop was jointly organized by the Laboratory of Mechanics Modeling and Production (LA2MP) of the National School of Engineers Sfax, Tunisia, and the Laboratory for Mechanical Systems and Materials Engineering (LISMMA) of Higher Institute of Mechanics (SUPMECA), Paris, France.
Del 2 - Applied Condition Monitoring
Multiphysics Modelling and Simulation for Systems Design and Monitoring
Proceedings of the Multiphysics Modelling and Simulation for Systems Design Conference, MMSSD 2014, 17-19 December, Sousse, Tunisia
Inbunden, Engelska, 2015
2 156 kr
Skickas inom 10-15 vardagar
In addition to providing a detailed description of the methods and their applications, the book also identifies new research issues, challenges and opportunities, thus providing researchers and practitioners with both technical information to support their daily work and a new source of inspiration for their future research.