Grant Martin – författare

Visar alla böcker från författaren Grant Martin. Handla med fri frakt och snabb leverans.

37 produkter

Kategorier

37 produkter

ESL Design and Verification
A Prescription for Electronic System Level Methodology
AvAndrew Piziali,Brian Baileym. fl.
E-bok
PDF, Engelska, 2010
695 kr
Läs direkt efter köp
Visit the authors'' companion site! http://www.electronicsystemlevel.com/ - Includes interactive forum with the authors!Electronic System Level (ESL) design has mainstreamed – it is now an established approach at most of the world''s leading system-on-chip (SoC) design companies and is being used increasingly in system design. From its genesis as an algorithm modeling methodology with ''no links to implementation'', ESL is evolving into a set of complementary methodologies that enable embedded system design, verification and debug through to the hardware and software implementation of custom SoC, system-on-FPGA, system-on-board, and entire multi-board systems. This book arises from experience the authors have gained from years of work as industry practitioners in the Electronic System Level design area; they have seen "SLD" or "ESL" go through many stages and false starts, and have observed that the shift in design methodologies to ESL is finally occurring. This is partly because of ESL technologies themselves are stabilizing on a useful set of languages being standardized (SystemC is the most notable), and use models are being identified that are beginning to get real adoption. ESL DESIGN & VERIFICATION offers a true prescriptive guide to ESL that reviews its past and outlines the best practices of today.Table of ContentsCHAPTER 1: WHAT IS ESL? CHAPTER 2: TAXONOMY AND DEFINITIONS FOR THE ELECTRONIC SYSTEM LEVEL CHAPTER 3: EVOLUTION OF ESL DEVELOPMENT CHAPTER 4: WHAT ARE THE ENABLERS OF ESL? CHAPTER 5: ESL FLOW CHAPTER 6: SPECIFICATIONS AND MODELING CHAPTER 7: PRE-PARTITIONING ANALYSIS CHAPTER 8: PARTITIONING CHAPTER 9: POST-PARTITIONING ANALYSIS AND DEBUG CHAPTER 10: POST-PARTITIONING VERIFICATION CHAPTER 11: HARDWARE IMPLEMENTATION CHAPTER 12: SOFTWARE IMPLEMENTATION CHAPTER 13: USE OF ESL FOR IMPLEMENTATION VERIFICATION CHAPTER 14: RESEARCH, EMERGING AND FUTURE PROSPECTS APPENDIX: LIST OF ACRONYMS* Provides broad, comprehensive coverage not available in any other such book * Massive global appeal with an internationally recognised author team * Crammed full of state of the art content from notable industry experts
Surviving the SOC Revolution
A Guide to Platform-Based Design
AvLee Todd,Andrew McNellym. fl.
E-bok
PDF, Engelska, 2007
1 427 kr
Läs direkt efter köp
The aim of Surviving the SOC Revolution: A Guide to Platform-Based Design is to provide the engineering community with a thorough understanding of the challenges involved when moving to system-on-a-chip and deliver a step-by-step methodology to get them there. Design reuse is most effective in reducing the cost and development time when the components to be shared are close to the final implementation. On the other hand, it is not always possible or desirable to share designs at this level, since minimal variations in specification can result in different, albeit similar, implementations. However, moving higher in abstraction can eliminate the differences among designs, so that the higher level of abstraction can be shared and only a minimal amount of work needs to be carried out to achieve final implementation. The ultimate goal is to create a library of functions and of hardware and software implementations that can be used for all new designs. It is important to have a multilevel library, since it is often the case that the lower levels that are closer to the physical implementation change because of the advances in technology, while the higher levels tend to be stable across product versions. It is most likely that the preferred approaches to the implementation of complex embedded systems will include the following aspects: Design costs and time are likely to dominate the decision-making process for systems designers. Therefore, design reuse in all its shapes and forms will be of paramount importance. Designs have to be captured at the highest level of abstraction to be able to exploit all the degrees of freedom that are available. Next-generation systems will use a few highly complex (Moore''s Law Limited) part-types, but many more energy-power-cost-efficient, medium-complexity (10M-100M) gates in 50nm technology chips, working concurrently to implement solutions to complex sensing, computing, and signaling/actuating problems. Such chips will most likely be developed as an instance of a particular platform. That is, rather than being assembled from a collection of independently developed blocks of silicon functionality, they will be derived from a specific `family'' of rnicro-architectures, possibly oriented toward a particular class of problems, that can be modified (extended or reduced) by the system developer. These platforms will be highly programmable. Both system and software reuse impose a design methodology that has to leverage existing implementations available at all levels of abstraction. £/LIST£ This book deals with the basic principles of a design methodology that addresses the concerns expressed above. The platform concept is carried throughout the book as a unifying theme to reuse. This is the first book that deals with the platform-based approach to the design of embedded systems and is a stepping stone for anyone who is interested in the real issues facing the design of complex systems-on-chip. From the Preface by Alberto Sangiovanni-Vincentelli
System Design with SystemC(TM)
AvStuart Swan,Grant Martinm. fl.
E-bok
PDF, Engelska, 2007
2 359 kr
Läs direkt efter köp
I am honored and delighted to write the foreword to this very first book about SystemC. It is now an excellent time to summarize what SystemC really is and what it can be used for. The main message in the area of design in the 2001 International Te- nologyRoadmapfor Semiconductors (ITRS) isthat“cost ofdesign is the greatest threat to the continuation ofthe semiconductor roadmap. ” This recent revision of the ITRS describes the major productivity improvements of the last few years as “small block reuse,” “large block reuse ,” and “IC implementation tools. ” In order to continue to reduce design cost, the - quired future solutions will be “intelligent test benches” and “embedded system-level methodology. ” As the new system-level specification and design language, SystemC - rectly contributes to these two solutions. These will have the biggest - pact on future design technology and will reduce system implementation cost. Ittook SystemC less than two years to emerge as the leader among the many new and well-discussed system-level designlanguages. Inmy op- ion, this is due to the fact that SystemC adopted object-oriented syst- level design—the most promising method already applied by the majority of firms during the last couple of years. Even before the introduction of SystemC, many system designers have attempted to develop executable specifications in C++. These executable functional specifications are then refined to the well-known transaction level, to model the communication of system-level processes.
UML for Real
Design of Embedded Real-Time Systems
AvBran V. Selic,Grant Martinm. fl.
E-bok
PDF, Engelska, 2007
2 105 kr
Läs direkt efter köp
The complexity of most real-time and embedded systems often exceeds that of other types of systems since, in addition to the usual spectrum of problems inherent in software, they need to deal with the complexities of the physical world. That world—as the proverbial Mr. Murphy tells us—is an unpredictable and often unfriendly place. Consequently, there is a very strong motivation to investigate and apply advanced design methods and technologies that could simplify and improve the reliability of real-time software design and implementation. As a result, from the first versions of UML issued in the mid 1990’s, designers of embedded and real-time systems have taken to UML with vigour and enthusiasm. However, the dream of a complete, model-driven design flow from specification through automated, optimised code generation, has been difficult to realise without some key improvements in UML semantics and syntax, specifically targeted to the real-time systems problem. With the enhancements in UML that have been proposed and are near standardisation with UML 2. 0, many of these improvements have been made. In the Spring of 2003, adoption of a formalised UML 2. 0 specification by the members of the Object Management Group (OMG) seems very close. It is therefore very appropriate to review the status of UML as a set of notations for embedded real-time systems - both the state of the art and best practices achieved up to this time with UML of previous generations - and where the changes embodied in the 2.
Taxonomies for the Development and Verification of Digital Systems
AvBrian Bailey,Grant Martinm. fl.
Inbunden, Engelska, 2005
1 113 kr
Skickas inom 10-15 vardagar
Communication between engineers, their managers, suppliers and customers relies on the existence of a common understanding for the meaning of terms. While this is not normally a problem, it has proved to be a significant roadblock in the EDA industry where terms are created as required by any number of people, multiple terms are coined for the same thing, or even worse, the same term is used for many different things. This taxonomy identifies all of the significant terms used by an industry and provides a structural framework in which those terms can be defined and their relationship to other terms identified.
Taxonomies for the Development and Verification of Digital Systems
AvThomas Anderson,Grant Martinm. fl.
E-bok
PDF, Engelska, 2005
1 427 kr
Läs direkt efter köp
Communication between engineers, their managers, suppliers and customers relies on the existence of a common understanding for the meaning of terms. While this is not normally a problem, it has proved to be a significant roadblock in the EDA industry where terms are created as required by any number of people, multiple terms are coined for the same thing, or even worse, the same term is used for many different things. This taxonomy identifies all of the significant terms used by an industry and provides a structural framework in which those terms can be defined and their relationship to other terms identified. The origins of this work go back to 1995 with a government-sponsored program called RASSP. At the termination of their work, VSIA picked up their work and developed it further. Three new taxonomies were introduced by VSIA for additional facets of the system design and development process. Since role of VSIA has now changed so that it no longer maintains these taxonomies, the baton is being passed on again through a group of interested people and manifested in this key reference work.
UML for SOC Design
AvGrant Martin,Wolfgang Müller
Inbunden, Engelska, 2005
1 147 kr
Skickas inom 10-15 vardagar
A tutorial approach to using the UML modeling language in system-on-chip design Based on the DAC 2004 tutorial, applicable for students and professionals Contributions by top-level international researchers The best work at the first UML for SoC workshop Unique combination of both UML capabilities and SoC design issues Condenses research and development ideas that are only found in multiple conference proceedings and many other books into one place Will be the seminal reference work for this area for years to come
UML for SOC Design
AvWolfgang Muller,Grant Martin
E-bok
PDF, Engelska, 2006
1 427 kr
Läs direkt efter köp
UML for SOC supplies tutorial approach to using the UML modeling language in system-on-chip design. It assembles the key contributors from DAC 2004 UML and SoC workshop, with some additional contributions to the book addede by other experts who did not present at the workshop. The selected chapters detail the latest approaches to executable UML, UML translations for FPGA synthesis and SystemC simulation, as well as UML-specific SoC methodologies. They give insights into the current state of the art, and the most recent advances in applying UML to SoC design. They also provide a representative overview of current UML activities in SoC design and give an excellent introduction to UML's application in hardware and hardware/software codesign.
Surviving the SOC Revolution
A Guide to Platform-Based Design
AvHenry Chang,L.R. Cookem. fl.
Inbunden, Engelska, 1999
1 113 kr
Skickas inom 10-15 vardagar
The aim of Surviving the SOC Revolution: A Guide to Platform-Based Design is to provide the engineering community with a thorough understanding of the challenges involved when moving to system-on-a-chip and deliver a step-by-step methodology to get them there. Design reuse is most effective in reducing the cost and development time when the components to be shared are close to the final implementation. On the other hand, it is not always possible or desirable to share designs at this level, since minimal variations in specification can result in different, albeit similar, implementations. However, moving higher in abstraction can eliminate the differences among designs, so that the higher level of abstraction can be shared and only a minimal amount of work needs to be carried out to achieve final implementation. The ultimate goal is to create a library of functions and of hardware and software implementations that can be used for all new designs. It is important to have a multilevel library, since it is often the case that the lower levels that are closer to the physical implementation change because of the advances in technology, while the higher levels tend to be stable across product versions. It is most likely that the preferred approaches to the implementation of complex embedded systems will include the following aspects: Design costs and time are likely to dominate the decision-making process for systems designers. Therefore, design reuse in all its shapes and forms will be of paramount importance. Designs have to be captured at the highest level of abstraction to be able to exploit all the degrees of freedom that are available. Next-generation systems will use a few highly complex (Moore's Law Limited) part-types, but many more energy-power-cost-efficient, medium-complexity (10M-100M) gates in 50nm technology chips, working concurrently to implement solutions to complex sensing, computing, and signaling/actuating problems. Such chips will most likely be developed as an instance of a particular platform. That is, rather than being assembled from a collection of independently developed blocks of silicon functionality, they will be derived from a specific `family' of rnicro-architectures, possibly oriented toward a particular class of problems, that can be modified (extended or reduced) by the system developer. These platforms will be highly programmable. Both system and software reuse impose a design methodology that has to leverage existing implementations available at all levels of abstraction. £/LIST£ This book deals with the basic principles of a design methodology that addresses the concerns expressed above. The platform concept is carried throughout the book as a unifying theme to reuse. This is the first book that deals with the platform-based approach to the design of embedded systems and is a stepping stone for anyone who is interested in the real issues facing the design of complex systems-on-chip. From the Preface by Alberto Sangiovanni-Vincentelli
EDA for IC Implementation, Circuit Design, and Process Technology
AvLuciano Lavagno,Louis Schefferm. fl.
Inbunden, Engelska, 2006
2 699 kr
Skickas inom 10-15 vardagar
Presenting a comprehensive overview of the design automation algorithms, tools, and methodologies used to design integrated circuits, the Electronic Design Automation for Integrated Circuits Handbook is available in two volumes. The second volume, EDA for IC Implementation, Circuit Design, and Process Technology, thoroughly examines real-time logic to GDSII (a file format used to transfer data of semiconductor physical layout), analog/mixed signal design, physical verification, and technology CAD (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability at the nanoscale, power supply network design and analysis, design modeling, and much more. Save on the complete set.
Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology
Volume 2
AvLuciano Lavagno,Grant Martinm. fl.
Inbunden, Engelska, 2026
3 731 kr
Skickas inom 10-15 vardagar
Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology, the second of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Third Edition, thoroughly examines real‑time logic (RTL) to GDSII generation, analog/mixed‑signal design, physical verification, and technology computer‑aided design (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability (DFM) at the nanoscale, power supply network design and analysis, design modeling, and much more.New to This Edition:Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non‑recurring engineering (NRE) costsSignificant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithographyNew coverage of cutting‑edge applications and approaches realized in the decade since the publication of the second edition—these are illustrated by updates including the impact of new analog layout methods, chiplet integration, and power‑optimized design, in various chaptersOffering improved depth and modernity, this book provides a valuable, state‑of‑the‑art reference for electronic design automation (EDA) students, researchers, and professionals.
Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology
Volume 2
AvLouis K. Scheffer,Igor L. Markovm. fl.
E-bok
PDF, Engelska, 2026
4 287 kr
Läs direkt efter köp
Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology, the second of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Third Edition, thoroughly examines real time logic (RTL) to GDSII generation, analog/mixed signal design, physical verification, and technology computer aided design (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability (DFM) at the nanoscale, power supply network design and analysis, design modeling, and much more.New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting edge applications and approaches realized in the decade since the publication of the second edition-these are illustrated by updates including the impact of new analog layout methods, chiplet integration, and power optimized design, in various chapters Offering improved depth and modernity, this book provides a valuable, state of the art reference for electronic design automation (EDA) students, researchers, and professionals.
Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology
Volume 2
AvLouis K. Scheffer,Igor L. Markovm. fl.
E-bok
Engelska, 2026
4 275 kr
Läs direkt efter köp
Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology, the second of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Third Edition, thoroughly examines real time logic (RTL) to GDSII generation, analog/mixed signal design, physical verification, and technology computer aided design (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability (DFM) at the nanoscale, power supply network design and analysis, design modeling, and much more.New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting edge applications and approaches realized in the decade since the publication of the second edition-these are illustrated by updates including the impact of new analog layout methods, chiplet integration, and power optimized design, in various chapters Offering improved depth and modernity, this book provides a valuable, state of the art reference for electronic design automation (EDA) students, researchers, and professionals.
Electronic Design Automation for IC System Design, Verification, and Testing
AvLuciano Lavagno,Igor L. Markovm. fl.
Häftad, Engelska, 2018
1 310 kr
Skickas inom 10-15 vardagar
The first of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC System Design, Verification, and Testing thoroughly examines system-level design, microarchitectural design, logic verification, and testing. Chapters contributed by leading experts authoritatively discuss processor modeling and design tools, using performance metrics to select microprocessor cores for integrated circuit (IC) designs, design and verification languages, digital simulation, hardware acceleration and emulation, and much more.New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costsSignificant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithographyNew coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on high-level synthesis, system-on-chip (SoC) block-based design, and back-annotating system-level modelsOffering improved depth and modernity, Electronic Design Automation for IC System Design, Verification, and Testing provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.
Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology
AvLuciano Lavagno,Igor L. Markovm. fl.
Häftad, Engelska, 2018
1 310 kr
Skickas inom 10-15 vardagar
The second of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology thoroughly examines real-time logic (RTL) to GDSII (a file format used to transfer data of semiconductor physical layout) design flow, analog/mixed signal design, physical verification, and technology computer-aided design (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability (DFM) at the nanoscale, power supply network design and analysis, design modeling, and much more.New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costsSignificant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithographyNew coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on 3D circuit integration and clock designOffering improved depth and modernity, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.
Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology
AvLouis K. Scheffer,Igor L. Markovm. fl.
E-bok
Engelska, 2017
1 542 kr
Läs direkt efter köp
The second of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology thoroughly examines real-time logic (RTL) to GDSII (a file format used to transfer data of semiconductor physical layout) design flow, analog/mixed signal design, physical verification, and technology computer-aided design (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability (DFM) at the nanoscale, power supply network design and analysis, design modeling, and much more.
New to This Edition:

Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on 3D circuit integration and clock design
Offering improved depth and modernity, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.
EDA for IC Implementation, Circuit Design, and Process Technology
AvGrant Martin,Louis Schefferm. fl.
E-bok
Engelska, 2018
2 998 kr
Läs direkt efter köp
Presenting a comprehensive overview of the design automation algorithms, tools, and methodologies used to design integrated circuits, the Electronic Design Automation for Integrated Circuits Handbook is available in two volumes. The second volume, EDA for IC Implementation, Circuit Design, and Process Technology, thoroughly examines real-time logic to GDSII (a file format used to transfer data of semiconductor physical layout), analog/mixed signal design, physical verification, and technology CAD (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability at the nanoscale, power supply network design and analysis, design modeling, and much more. Save on the complete set.
EDA for IC System Design, Verification, and Testing
AvGrant Martin,Luciano Lavagnom. fl.
E-bok
Engelska, 2018
2 998 kr
Läs direkt efter köp
Presenting a comprehensive overview of the design automation algorithms, tools, and methodologies used to design integrated circuits, the Electronic Design Automation for Integrated Circuits Handbook is available in two volumes. The first volume, EDA for IC System Design, Verification, and Testing, thoroughly examines system-level design, microarchitectural design, logical verification, and testing. Chapters contributed by leading experts authoritatively discuss processor modeling and design tools, using performance metrics to select microprocessor cores for IC designs, design and verification languages, digital simulation, hardware acceleration and emulation, and much more. Save on the complete set.
System Design with SystemC™
AvThorsten Grötker,Stan Liaom. fl.
Inbunden, Engelska, 2002
1,0 utav 5 stjärnor. Totalt antal röster:(1)
1 944 kr
Skickas inom 10-15 vardagar
I am honored and delighted to write the foreword to this very first book about SystemC. It is now an excellent time to summarize what SystemC really is and what it can be used for. The main message in the area of design in the 2001 International Te- nologyRoadmapfor Semiconductors (ITRS) isthat“cost ofdesign is the greatest threat to the continuation ofthe semiconductor roadmap. ” This recent revision of the ITRS describes the major productivity improvements of the last few years as “small block reuse,” “large block reuse ,” and “IC implementation tools. ” In order to continue to reduce design cost, the - quired future solutions will be “intelligent test benches” and “embedded system-level methodology. ” As the new system-level specification and design language, SystemC - rectly contributes to these two solutions. These will have the biggest - pact on future design technology and will reduce system implementation cost. Ittook SystemC less than two years to emerge as the leader among the many new and well-discussed system-level designlanguages. Inmy op- ion, this is due to the fact that SystemC adopted object-oriented syst- level design—the most promising method already applied by the majority of firms during the last couple of years. Even before the introduction of SystemC, many system designers have attempted to develop executable specifications in C++. These executable functional specifications are then refined to the well-known transaction level, to model the communication of system-level processes.
Winning the SoC Revolution
Experiences in Real Design
AvGrant Martin,Henry Chang
Inbunden, Engelska, 2003
1 667 kr
Skickas inom 10-15 vardagar
In 1998-99, at the dawn of the SoC Revolution, we wrote Surviving the SOC Revolution: A Guide to Platform Based Design. In that book, we focused on presenting guidelines and best practices to aid engineers beginning to design complex System-on-Chip devices (SoCs). Now, in 2003, facing the mid-point of that revolution, we believe that it is time to focus on winning.In this book, Winning the SoC Revolution: Experiences in Real Design, we gather the best practical experiences in how to design SoCs from the most advanced design groups, while setting the issues and techniques in the context of SoC design methodologies. As an edited volume, this book has contributions from the leading design houses who are winning in SoCs - Altera, ARM, IBM, Philips, TI, UC Berkeley, and Xilinx. These chapters present the many facets of SoC design - the platform based approach, how to best utilize IP, Verification, FPGA fabrics as an alternative to ASICs, and next generation process technology issues. We also include observations from Ron Wilson of CMP Media on best practices for SoC design team collaboration. We hope that by utilizing this book, you too, will win the SoC Revolution.
UML for Real
Design of Embedded Real-Time Systems
AvLuciano Lavagno,Grant Martinm. fl.
Inbunden, Engelska, 2003
1 716 kr
Skickas inom 10-15 vardagar
The complexity of most real-time and embedded systems often exceeds that of other types of systems since, in addition to the usual spectrum of problems inherent in software, they need to deal with the complexities of the physical world. That world—as the proverbial Mr. Murphy tells us—is an unpredictable and often unfriendly place. Consequently, there is a very strong motivation to investigate and apply advanced design methods and technologies that could simplify and improve the reliability of real-time software design and implementation. As a result, from the first versions of UML issued in the mid 1990’s, designers of embedded and real-time systems have taken to UML with vigour and enthusiasm. However, the dream of a complete, model-driven design flow from specification through automated, optimised code generation, has been difficult to realise without some key improvements in UML semantics and syntax, specifically targeted to the real-time systems problem. With the enhancements in UML that have been proposed and are near standardisation with UML 2. 0, many of these improvements have been made. In the Spring of 2003, adoption of a formalised UML 2. 0 specification by the members of the Object Management Group (OMG) seems very close. It is therefore very appropriate to review the status of UML as a set of notations for embedded real-time systems - both the state of the art and best practices achieved up to this time with UML of previous generations - and where the changes embodied in the 2.
EDA for IC System Design, Verification, and Testing
AvGrant Martin,Luciano Lavagnom. fl.
E-bok
PDF, Engelska, 2018
2 967 kr
Läs direkt efter köp
Presenting a comprehensive overview of the design automation algorithms, tools, and methodologies used to design integrated circuits, the Electronic Design Automation for Integrated Circuits Handbook is available in two volumes. The first volume, EDA for IC System Design, Verification, and Testing, thoroughly examines system-level design, microarchitectural design, logical verification, and testing. Chapters contributed by leading experts authoritatively discuss processor modeling and design tools, using performance metrics to select microprocessor cores for IC designs, design and verification languages, digital simulation, hardware acceleration and emulation, and much more. Save on the complete set.
EDA for IC Implementation, Circuit Design, and Process Technology
AvGrant Martin,Louis Schefferm. fl.
E-bok
PDF, Engelska, 2018
2 998 kr
Läs direkt efter köp
Presenting a comprehensive overview of the design automation algorithms, tools, and methodologies used to design integrated circuits, the Electronic Design Automation for Integrated Circuits Handbook is available in two volumes. The second volume, EDA for IC Implementation, Circuit Design, and Process Technology, thoroughly examines real-time logic to GDSII (a file format used to transfer data of semiconductor physical layout), analog/mixed signal design, physical verification, and technology CAD (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability at the nanoscale, power supply network design and analysis, design modeling, and much more. Save on the complete set.
ESL Models and their Application
Electronic System Level Design and Verification in Practice
AvBrian Bailey,Grant Martin
Inbunden, Engelska, 2009
1 113 kr
Skickas inom 10-15 vardagar
This book arises from experience the authors have gained from years of work as industry practitioners in the field of Electronic System Level design (ESL). At the heart of all things related to Electronic Design Automation (EDA), the core issue is one of models: what are the models used for, what should the models contain, and how should they be written and distributed. Issues such as interoperability and tool transportability become central factors that may decide which ones are successful and those that cannot get sufficient traction in the industry to survive.Through a set of real examples taken from recent industry experience, this book will distill the state of the art in terms of System-Level Design models and provide practical guidance to readers that can be put into use. This book is an invaluable tool that will aid readers in their own designs, reduce risk in development projects, expand the scope of design projects, and improve developmental processes and project planning.
ESL Models and their Application
Electronic System Level Design and Verification in Practice
AvGrant Martin,Brian Bailey
E-bok
PDF, Engelska, 2009
1 413 kr
Läs direkt efter köp
This book arises from experience the authors have gained from years of work as industry practitioners in the field of Electronic System Level design (ESL). At the heart of all things related to Electronic Design Automation (EDA), the core issue is one of models: what are the models used for, what should the models contain, and how should they be written and distributed. Issues such as interoperability and tool transportability become central factors that may decide which ones are successful and those that cannot get sufficient traction in the industry to survive.
Through a set of real examples taken from recent industry experience, this book will distill the state of the art in terms of System-Level Design models and provide practical guidance to readers that can be put into use. This book is an invaluable tool that will aid readers in their own designs, reduce risk in development projects, expand the scope of design projects, and improve developmental processes and project planning.
Taxonomies for the Development and Verification of Digital Systems
AvBrian Bailey,Grant Martinm. fl.
Häftad, Engelska, 2010
1 113 kr
Skickas inom 10-15 vardagar
Communication between engineers, their managers, suppliers and customers relies on the existence of a common understanding for the meaning of terms. While this is not normally a problem, it has proved to be a significant roadblock in the EDA industry where terms are created as required by any number of people, multiple terms are coined for the same thing, or even worse, the same term is used for many different things. This taxonomy identifies all of the significant terms used by an industry and provides a structural framework in which those terms can be defined and their relationship to other terms identified. The origins of this work go back to 1995 with a government-sponsored program called RASSP. At the termination of their work, VSIA picked up their work and developed it further. Three new taxonomies were introduced by VSIA for additional facets of the system design and development process. Since role of VSIA has now changed so that it no longer maintains these taxonomies, the baton is being passed on again through a group of interested people and manifested in this key reference work.
UML for SOC Design
AvGrant Martin,Wolfgang Müller
Häftad, Engelska, 2010
1 113 kr
Skickas inom 10-15 vardagar
UML for SOC supplies tutorial approach to using the UML modeling language in system-on-chip design. It assembles the key contributors from DAC 2004 UML and SoC workshop, with some additional contributions to the book addede by other experts who did not present at the workshop. The selected chapters detail the latest approaches to executable UML, UML translations for FPGA synthesis and SystemC simulation, as well as UML-specific SoC methodologies. They give insights into the current state of the art, and the most recent advances in applying UML to SoC design. They also provide a representative overview of current UML activities in SoC design and give an excellent introduction to UML’s application in hardware and hardware/software codesign.
System Design with SystemC™
AvThorsten Grötker,Stan Liaom. fl.
Häftad, Engelska, 2010
1 888 kr
Skickas inom 10-15 vardagar
I am honored and delighted to write the foreword to this very first book about SystemC. It is now an excellent time to summarize what SystemC really is and what it can be used for. The main message in the area of design in the 2001 International Te- nologyRoadmapfor Semiconductors (ITRS) isthat“cost ofdesign is the greatest threat to the continuation ofthe semiconductor roadmap. ” This recent revision of the ITRS describes the major productivity improvements of the last few years as “small block reuse,” “large block reuse ,” and “IC implementation tools. ” In order to continue to reduce design cost, the - quired future solutions will be “intelligent test benches” and “embedded system-level methodology. ” As the new system-level specification and design language, SystemC - rectly contributes to these two solutions. These will have the biggest - pact on future design technology and will reduce system implementation cost. Ittook SystemC less than two years to emerge as the leader among the many new and well-discussed system-level designlanguages. Inmy op- ion, this is due to the fact that SystemC adopted object-oriented syst- level design—the most promising method already applied by the majority of firms during the last couple of years. Even before the introduction of SystemC, many system designers have attempted to develop executable specifications in C++. These executable functional specifications are then refined to the well-known transaction level, to model the communication of system-level processes.
UML for Real
Design of Embedded Real-Time Systems
AvLuciano Lavagno,Grant Martinm. fl.
Häftad, Engelska, 2010
1 716 kr
Skickas inom 10-15 vardagar
The complexity of most real-time and embedded systems often exceeds that of other types of systems since, in addition to the usual spectrum of problems inherent in software, they need to deal with the complexities of the physical world. That world—as the proverbial Mr. Murphy tells us—is an unpredictable and often unfriendly place. Consequently, there is a very strong motivation to investigate and apply advanced design methods and technologies that could simplify and improve the reliability of real-time software design and implementation. As a result, from the first versions of UML issued in the mid 1990’s, designers of embedded and real-time systems have taken to UML with vigour and enthusiasm. However, the dream of a complete, model-driven design flow from specification through automated, optimised code generation, has been difficult to realise without some key improvements in UML semantics and syntax, specifically targeted to the real-time systems problem. With the enhancements in UML that have been proposed and are near standardisation with UML 2. 0, many of these improvements have been made. In the Spring of 2003, adoption of a formalised UML 2. 0 specification by the members of the Object Management Group (OMG) seems very close. It is therefore very appropriate to review the status of UML as a set of notations for embedded real-time systems - both the state of the art and best practices achieved up to this time with UML of previous generations - and where the changes embodied in the 2.
Winning the SoC Revolution
Experiences in Real Design
AvGrant Martin,Henry Chang
Häftad, Engelska, 2012
1 667 kr
Skickas inom 10-15 vardagar
In 1998-99, at the dawn of the SoC Revolution, we wrote Surviving the SOC Revolution: A Guide to Platform Based Design. In that book, we focused on presenting guidelines and best practices to aid engineers beginning to design complex System-on-Chip devices (SoCs). Now, in 2003, facing the mid-point of that revolution, we believe that it is time to focus on winning.In this book, Winning the SoC Revolution: Experiences in Real Design, we gather the best practical experiences in how to design SoCs from the most advanced design groups, while setting the issues and techniques in the context of SoC design methodologies. As an edited volume, this book has contributions from the leading design houses who are winning in SoCs - Altera, ARM, IBM, Philips, TI, UC Berkeley, and Xilinx. These chapters present the many facets of SoC design - the platform based approach, how to best utilize IP, Verification, FPGA fabrics as an alternative to ASICs, and next generation process technology issues. We also include observations from Ron Wilson of CMP Media on best practices for SoC design team collaboration. We hope that by utilizing this book, you too, will win the SoC Revolution.

Grant Martin – författare

ESL Design and Verification

Surviving the SOC Revolution

System Design with SystemC(TM)

UML for Real

Taxonomies for the Development and Verification of Digital Systems

Taxonomies for the Development and Verification of Digital Systems

UML for SOC Design

UML for SOC Design

Surviving the SOC Revolution

EDA for IC Implementation, Circuit Design, and Process Technology

Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology

Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology

Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology

Electronic Design Automation for IC System Design, Verification, and Testing

Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology

Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology

EDA for IC Implementation, Circuit Design, and Process Technology

EDA for IC System Design, Verification, and Testing

System Design with SystemC™

Winning the SoC Revolution

UML for Real

EDA for IC System Design, Verification, and Testing

EDA for IC Implementation, Circuit Design, and Process Technology

ESL Models and their Application

ESL Models and their Application

Taxonomies for the Development and Verification of Digital Systems

UML for SOC Design

System Design with SystemC™

UML for Real

Winning the SoC Revolution