Ivan Pavlenko – författare
Visar alla böcker från författaren Ivan Pavlenko. Handla med fri frakt och snabb leverans.
27 produkter
27 produkter
Häftad, Engelska, 2019
1 076 kr
Skickas inom 10-15 vardagar
This book covers a variety of topics related to the Industry 4.0 concept, with a special emphasis on the efficiency of production processes and innovative solutions for smart factories.
2 145 kr
Skickas inom 10-15 vardagar
This book reports on topics at the interface between manufacturing, mechanical and chemical engineering. It gives special emphasis to CAD/CAE systems, information management systems, advanced numerical simulation methods and computational modeling techniques, and their use in product design, industrial process optimization and in the study of the properties of solids, structures, and fluids. Control theory, ICT for engineering education as well as ecological design, and food technologies are also among the topics discussed in the book. Based on the 2nd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2019), held on June 11-14, 2019, in Lutsk, Ukraine, the book provides academics and professionals with a timely overview and extensive information on trends and technologies behind current and future developments of Industry 4.0, innovative design and renewable energy generation.
Häftad, Engelska, 2020
1 611 kr
Skickas inom 10-15 vardagar
Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2019), held in Odessa, Ukraine on September 10-13, 2019, this book offers a timely overview and extensive information on trends and technologies in the area of manufacturing, mechanical and materials engineering.
1 611 kr
Skickas inom 10-15 vardagar
and chemical process technologies, including ultrasonic technology, capillary rising process, pneumatic classification, membrane electrolysis and absorption processes, it reports on developments in the field of heat and mass transfer, energy-efficient technologies, and industrial ecology.
1 611 kr
Skickas inom 10-15 vardagar
This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on design and simulation issues.
Häftad, Engelska, 2021
2 145 kr
Skickas inom 10-15 vardagar
This book offers a timely yet comprehensive snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as cutting, grinding, assembly, and coatings, including ultrasonic treatment, molding, radial-isostatic compression, ionic-plasma deposition, volumetric vibration treatment, and wear resistance. It also highlights the advantages of augmented reality, RFID technology, reverse engineering, optimization, heat and mass transfer, energy management, quality inspection, and environmental impact. Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2020), held in Odessa, Ukraine, on September 8–11, 2020, this book offers a timely overview and extensive information on trends and technologies in production planning, design engineering, advanced materials, machining processes, process engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and offer a bridge between academic and industrial researchers.
2 145 kr
Skickas inom 10-15 vardagar
This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on product design and advanced manufacturing processes, intelligent solutions for Industry 4.0, covers topics in ICT for engineering education, describes the numerical simulation and experimental studies of milling, honing, burnishing, grinding, boring, and turning, as well as the development and implementation of advanced materials. Based on the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2021), held on June 8-11, 2021, in Lviv, Ukraine, this first volume of a 2-volume set provides academics and professionals with extensive information on trends, technologies, challenges and practice-oriented experience in the above-mentioned areas.
1 611 kr
Skickas inom 10-15 vardagar
This book reports on topics at the interface between mechanical and chemical engineering, emphasizing design, simulation, and manufacturing. Specifically, it covers recent developments in the mechanics of solids and structures, numerical simulation of coupled problems, including fatigue, fluid behavior, particle movement, pressure distribution. Further, it reports on developments in chemical process technology, heat and mass transfer, energy-efficient technologies, and industrial ecology. Based on the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2021), held on June 8-11, 2021, in Lviv, Ukraine, this second volume of a 2-volume set provides academics and professionals with extensive information on trends, technologies, challenges and practice-oriented experience in the above-mentioned areas.
Inbunden, Engelska, 2021
3 215 kr
Skickas inom 10-15 vardagar
This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as grinding, boring, milling, turning, woodworking, coatings, including additive manufacturing. It focuses on laser, ultrasonic, and combined laser–ultrasonic hardening treatments, and dispersion hardening. It describes tribology and functional analysis of coatings, separation, purification and filtration processes, as well as ecological recirculation and electrohydraulic activation, highlighting the growing role of digital twins, optimization and lifecycle management methods, and quality inspection processes. It also covers cutting-edge heat and mass transfer technologies and energy management methods. Gathering the best papers presented at the 3rd Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2021), held in Odessa, Ukraine, on September 7–10, 2021, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
Häftad, Engelska, 2022
3 215 kr
Skickas inom 10-15 vardagar
This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance.
Häftad, Engelska, 2022
1 611 kr
Skickas inom 10-15 vardagar
This book reports on cutting-edge research and technology aimed at increasing the efficiency of production processes and to foster the implementation of Industry 4.0 solutions in manufacturing.
2 466 kr
Skickas inom 10-15 vardagar
This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on smart and sustainable manufacturing.
1 825 kr
Skickas inom 10-15 vardagar
This book reports on topics at the interface between mechanical and chemical engineering, emphasizing aspects related to design, simulation, and manufacturing. It covers recent findings concerning the mechanics of fluids, solids, and structures, and numerical and computational methods for solving coupled problems in manufacturing. Further, it reports on recent developments in chemical process technology, heat and mass transfer research, and energy-efficient technologies, describing applications in the food and energy production sector. Based on the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2022), held on June 7-10, 2022, in Poznan, Poland, this second volume of a 2-volume set provides academics and professionals with extensive information on trends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.
Inbunden, Engelska, 2022
2 145 kr
Skickas inom 10-15 vardagar
This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as grinding, boring, milling, broaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6–9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
Häftad, Engelska, 2023
2 145 kr
Skickas inom 10-15 vardagar
This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as grinding, boring, milling, broaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6–9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
2 457 kr
Skickas inom 5-8 vardagar
This book reports on advances in manufacturing, with a special emphasis on smart manufacturing and information management systems. It covers sensors, machine vision systems, collaborative technologies, industrial robotics, digital twins, and virtual and mixed reality. Further topics include quality management, supply chain, agile manufacturing, lean management, and sustainable transportation. Chapters report on theoretical research and experimental studies concerning engineering design, simulation, and various machining processes for classical and additive manufacturing. They also discusses key aspects related to engineering education and competence management in the industry 4.0 era. Based on the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2022), held on June 6-9, 2023, in High Tatras, Slovak Republic, this first volume of a 2-volume set provides academics and professionals with extensive information ontrends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.
2 145 kr
Skickas inom 10-15 vardagar
This book reports on topics at the interface between mechanical and materials engineering, emphasizing aspects related to design, simulation, and manufacturing. It covers advanced methods in design engineering, applied to mechatronic systems, industrial equipment, turbines and drives. It reports on methods for improving the separation and prilling processes. It covers cutting-edge theoretical and experimental findings relating to material behavior, and materials, composites and coatings design. Further, it reports on advanced material treatments such as chemical-thermocycling, plasma deposition, and mechanical strengthening processes, among others. Based on the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2023), held on June 6–9, 2023, in High Tatras, Slovak Republic, this second volume of a 2-volume set provides academics and professionals with extensive information on trends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.
650 kr
Skickas inom 5-8 vardagar
Inbunden, Engelska, 2023
3 536 kr
Skickas inom 10-15 vardagar
This book offers a timely snapshot of innovative research and developments at the interface between design, manufacturing, materials, mechanical and process engineering, and quality assurance.
Häftad, Engelska, 2024
3 536 kr
Skickas inom 10-15 vardagar
This book offers a timely snapshot of innovative research and developments at the interface between design, manufacturing, materials, mechanical and process engineering, and quality assurance.
Inbunden, Engelska, 2023
542 kr
Skickas inom 10-15 vardagar
This open access book offers a timely snapshot of Augmented Reality (AR) technology, with an emphasis on its application within the mechanical and manufacturing engineering domains, for both educational and industrial purposes.
Häftad, Engelska, 2023
435 kr
Skickas inom 10-15 vardagar
This open access book offers a timely snapshot of Augmented Reality (AR) technology, with an emphasis on its application within the mechanical and manufacturing engineering domains, for both educational and industrial purposes.
Häftad, Engelska, 2024
2 145 kr
Skickas inom 10-15 vardagar
2 359 kr
Skickas inom 10-15 vardagar
This book reports on advances in manufacturing, with a special emphasis on smart manufacturing and information management systems.
2 359 kr
Skickas inom 10-15 vardagar
This book reports on topics at the interface between mechanical and materials engineering, emphasizing aspects related to design, simulation, and manufacturing.
- Nyhet
Häftad, Engelska, 2026
1 932 kr
Skickas inom 10-15 vardagar
This book reports on research findings and technologies supporting the paradigm shift toward the Factory of the Future. Gathering peer-review contributions to the 9th International Scientific-Technical Conference MANUFACTURING 2026, held on May 19-21, 2026, in Poznan, Poland, it covers topics relating to quality management in the context of Industry 4.0/5.0 and sustainable development. They report on advanced methods for intelligent monitoring, big data analytics, energy efficiency and new strategies for safety and ergonomics in organization. All in all, this book provides researchers, engineers, production managers, and educators with extensive information for advancing quality engineering in the next generation of manufacturing systems.
Häftad, Engelska, 2018
2 145 kr
Skickas inom 10-15 vardagar
This book reports on topics at the interface between manufacturing, mechanical and chemical engineering. It gives a special emphasis to CAD/CAE systems, information management systems, advanced numerical simulation methods and computational modeling techniques, and their use in product design, industrial process optimization and in the study of the properties of solids, structures and fluids. Control theory, ICT for engineering education as well as ecological design and food technologies are also among the topics discussed in the book. Based on the International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2018), held on June 12-15, 2018, in Sumy, Ukraine, the book provides academics and professionals with a timely overview and extensive information on trends and technologies behind current and future developments of Industry 4.0, innovative design and renewable energy generation.