Qammer H. Abbasi – författare

With the advances in small and low-cost radio transceivers and RF front-ends development, the possibility of applying ubiquitous and non-invasive sensors integrated into user’s daily clothing and living activities seems more feasible. The ability to share data increases the usefulness of personal information devices, providing features not possible with independent isolated devices. Current wireless sensor solutions are limited in that they do not provide the means to overcome obstacles and shadowing of propagating radio waves. Thus for reliable communications an increase in power consumption is required, reducing battery life. This book addresses the limitations outlined above by designing efficient and compact antenna systems. These systems will be cooperative and also aware of the surrounding environment and neighboring units, providing efficient and low power wireless connectivity for personal area network (PAN) and body area network (BAN) applications.

With the advances in small and low-cost radio transceivers and RF front-ends development, the possibility of applying ubiquitous and non-invasive sensors integrated into user''s daily clothing and living activities seems more feasible. The ability to share data increases the usefulness of personal information devices, providing features not possible with independent isolated devices. Current wireless sensor solutions are limited in that they do not provide the means to overcome obstacles and shadowing of propagating radio waves. Thus for reliable communications an increase in power consumption is required, reducing battery life. This book addresses the limitations outlined above by designing efficient and compact antenna systems. These systems will be cooperative and also aware of the surrounding environment and neighboring units, providing efficient and low power wireless connectivity for personal area network (PAN) and body area network (BAN) applications.- Analysis of wearable antenna design and performance- Addresses the Influence of body-worn antennas on radio channels and radio device performance from a power and error rate perspective.- Cooperative networking principles applied to body area networks, showing the pros and cons of such concepts- Real life case scenarios using ECG sample signals for potential application to healthcare monitoring.

Moving Towards Fully Autonomous and Cost-Effective Surgical Robotic Systems with AI offers advanced insights into how AI can be used to optimize the design, manufacturing, and clinical application of these systems. It covers a wide range of topics, including the introduction of surgical robotic systems design and the presentation of a fully autonomous surgical robotic system for minimally invasive surgery. Advanced medical imaging techniques integrated with surgical robots are discussed to enhance surgical precision and safety. The book also highlights the application of machine learning and deep learning models in robotic-assisted surgery, with the development of novel algorithms for autonomous surgical robots. Various AI approaches for optimizing surgical robotic systems and the design considerations for manufacturing and assembly are examined. Additionally, the book includes a thorough analysis of the life cycle and economic aspects of surgical robotic systems, as well as risk assessment and evaluation methods. The final chapters address ethics considerations and explore future enhancements in the realm of fully autonomous surgical robotic systems. Overall, this book aims to contribute to the technical understanding, design aspects, and ethical dimensions of surgical robotics, promoting safer and more efficient surgical procedures.Provides in-depth insights into the intersection of AI, robotics, and healthcareOffers practical knowledge and applications of AI and robotics in the healthcare industry, aiding engineers in designing and implementing innovative medical devicesProvides information and potential use cases for AI-driven technologies in healthcare, fostering research and advancementsHighlights the potential benefits of such technologies in optimizing healthcare systems, improving patient outcomes, and streamlining medical processes to promote sustainability in the healthcare sector

How 5G technology can support the demands of multiple vertical industriesRecent advances in technologyhave created new vertical industries that are highly dependent on the availability and reliability of data between multiple locations. The 5G system, unlike previous generations, will be entirely data driven—addressing latency, resilience, connection density, coverage area, and other vertical industry criteria. Enabling 5G Communication Systems to Support Vertical Industries demonstrates how 5G communication systems can meet the needs unique to vertical industries for efficient, cost-effective delivery of service. Covering both theory and practice, this book explores solutions to problems in specific industrial sectors including smart transportation, smart agriculture, smart grid, environmental monitoring, and disaster management. The 5G communication system will have to provide customized solutions to accommodate each vertical industry’s specific requirements. Whether an industry practitioner designingthe next generation of wireless communications or a researcher needing to identify open issues and classify their research, this timely book: Covers the much-discussed topics of supporting multiple vertical industries and new ICT challengesAddresses emerging issues and real-world problems surrounding 5G technology in wireless communication and networkingExplores a comprehensive array of essential topics such as connected health, smart transport, smart manufacturing, and morePresents important topics in a clear, concise style suitable for new learners and professionals alikeIncludes contributions from experts and industry leaders, system diagrams, charts, tables, and examplesEnabling 5G Communication Systems to Support Vertical Industries is a valuable resource telecom engineers industry professionals, researchers, professors, doctorate, and postgraduate students requiring up-to-date information on supporting vertical industries with 5G technology systems.

How 5G technology can support the demands of multiple vertical industries

Recent advances in technologyhave created new vertical industries that are highly dependent on the availability and reliability of data between multiple locations. The 5G system, unlike previous generations, will be entirely data driven—addressing latency, resilience, connection density, coverage area, and other vertical industry criteria. Enabling 5G Communication Systems to Support Vertical Industries demonstrates how 5G communication systems can meet the needs unique to vertical industries for efficient, cost-effective delivery of service. Covering both theory and practice, this book explores solutions to problems in specific industrial sectors including smart transportation, smart agriculture, smart grid, environmental monitoring, and disaster management. 

The 5G communication system will have to provide customized solutions to accommodate each vertical industry’s specific requirements. Whether an industry practitioner designingthe next generation of wireless communications or a researcher needing to identify open issues and classify their research, this timely book:

Covers the much-discussed topics of supporting multiple vertical industries and new ICT challenges Addresses emerging issues and real-world problems surrounding 5G technology in wireless communication and networking Explores a comprehensive array of essential topics such as connected health, smart transport, smart manufacturing, and more Presents important topics in a clear, concise style suitable for new learners and professionals alike Includes contributions from experts and industry leaders, system diagrams, charts, tables, and examples

Enabling 5G Communication Systems to Support Vertical Industries is a valuable resource telecom engineers industry professionals, researchers, professors, doctorate, and postgraduate students requiring up-to-date information on supporting vertical industries with 5G technology systems.

How 5G technology can support the demands of multiple vertical industries

Recent advances in technologyhave created new vertical industries that are highly dependent on the availability and reliability of data between multiple locations. The 5G system, unlike previous generations, will be entirely data driven—addressing latency, resilience, connection density, coverage area, and other vertical industry criteria. Enabling 5G Communication Systems to Support Vertical Industries demonstrates how 5G communication systems can meet the needs unique to vertical industries for efficient, cost-effective delivery of service. Covering both theory and practice, this book explores solutions to problems in specific industrial sectors including smart transportation, smart agriculture, smart grid, environmental monitoring, and disaster management. 

The 5G communication system will have to provide customized solutions to accommodate each vertical industry’s specific requirements. Whether an industry practitioner designingthe next generation of wireless communications or a researcher needing to identify open issues and classify their research, this timely book:

Covers the much-discussed topics of supporting multiple vertical industries and new ICT challenges Addresses emerging issues and real-world problems surrounding 5G technology in wireless communication and networking Explores a comprehensive array of essential topics such as connected health, smart transport, smart manufacturing, and more Presents important topics in a clear, concise style suitable for new learners and professionals alike Includes contributions from experts and industry leaders, system diagrams, charts, tables, and examples

Enabling 5G Communication Systems to Support Vertical Industries is a valuable resource telecom engineers industry professionals, researchers, professors, doctorate, and postgraduate students requiring up-to-date information on supporting vertical industries with 5G technology systems.

Presents the components, challenges, and solutions of wireless automation as enablers for industry 4.0

This timely book introduces the state of the art in industrial automation techniques, concentrating on wireless methods for a variety of applications, ranging from simple smart homes to heavy-duty complex industrial setting with robotics accessibility. It covers a wide range of topics including the industrial revolution enablers, applications, challenges, their possible solutions, and future directions.

Wireless Automation as an Enabler for the Next Industrial Revolution opens with an introduction to wireless sensor networks and their applications in various domains, emphasizing industrial wireless networks and their future uses. It then takes a look at life-span extension for sensor networks in the industry, followed by a chapter on multiple access and resource sharing for low latency critical industrial networks. Industrial automation is covered next, as is the subject of ultra reliable low latency communications. Other topics include: self healing in wireless networks; cost efficiency optimization for industrial automation; a non event-based approach for non-intrusive load monitoring; wireless networked control; and caching at the edge in low latency wireless networks. The book finishes with a chapter on the application of terahertz sensing at nano-scale for precision agriculture.

Introduces the future evolving dimension in industrial automation and discusses the enablers of the industrial revolution Places particular emphasis on wireless communication techniques which make industrial automation reliable, efficient, and cost-effective Covers many of the associated topics and concepts like robotics, AI, internet-of-things, telesurgery, and remote manufacturing Of great interest to researchers from academia and industry who are looking at the industrial development from various perspectives

Wireless Automation as an Enabler for the Next Industrial Revolution is an excellent book for telecom engineers, IoT experts, and industry professionals. It would also greatly benefit researchers, professors, and doctorate and postgraduate students involved in automation and industry 4.0.

Presents the components, challenges, and solutions of wireless automation as enablers for industry 4.0This timely book introduces the state of the art in industrial automation techniques, concentrating on wireless methods for a variety of applications, ranging from simple smart homes to heavy-duty complex industrial setting with robotics accessibility. It covers a wide range of topics including the industrial revolution enablers, applications, challenges, their possible solutions, and future directions.Wireless Automation as an Enabler for the Next Industrial Revolution opens with an introduction to wireless sensor networks and their applications in various domains, emphasizing industrial wireless networks and their future uses. It then takes a look at life-span extension for sensor networks in the industry, followed by a chapter on multiple access and resource sharing for low latency critical industrial networks. Industrial automation is covered next, as is the subject of ultra reliable low latency communications. Other topics include: self healing in wireless networks; cost efficiency optimization for industrial automation; a non event-based approach for non-intrusive load monitoring; wireless networked control; and caching at the edge in low latency wireless networks. The book finishes with a chapter on the application of terahertz sensing at nano-scale for precision agriculture. Introduces the future evolving dimension in industrial automation and discusses the enablers of the industrial revolutionPlaces particular emphasis on wireless communication techniques which make industrial automation reliable, efficient, and cost-effectiveCovers many of the associated topics and concepts like robotics, AI, internet-of-things, telesurgery, and remote manufacturingOf great interest to researchers from academia and industry who are looking at the industrial development from various perspectivesWireless Automation as an Enabler for the Next Industrial Revolution is an excellent book for telecom engineers, IoT experts, and industry professionals. It would also greatly benefit researchers, professors, and doctorate and postgraduate students involved in automation and industry 4.0.

Presents the components, challenges, and solutions of wireless automation as enablers for industry 4.0

This timely book introduces the state of the art in industrial automation techniques, concentrating on wireless methods for a variety of applications, ranging from simple smart homes to heavy-duty complex industrial setting with robotics accessibility. It covers a wide range of topics including the industrial revolution enablers, applications, challenges, their possible solutions, and future directions.

Wireless Automation as an Enabler for the Next Industrial Revolution opens with an introduction to wireless sensor networks and their applications in various domains, emphasizing industrial wireless networks and their future uses. It then takes a look at life-span extension for sensor networks in the industry, followed by a chapter on multiple access and resource sharing for low latency critical industrial networks. Industrial automation is covered next, as is the subject of ultra reliable low latency communications. Other topics include: self healing in wireless networks; cost efficiency optimization for industrial automation; a non event-based approach for non-intrusive load monitoring; wireless networked control; and caching at the edge in low latency wireless networks. The book finishes with a chapter on the application of terahertz sensing at nano-scale for precision agriculture.

Introduces the future evolving dimension in industrial automation and discusses the enablers of the industrial revolution Places particular emphasis on wireless communication techniques which make industrial automation reliable, efficient, and cost-effective Covers many of the associated topics and concepts like robotics, AI, internet-of-things, telesurgery, and remote manufacturing Of great interest to researchers from academia and industry who are looking at the industrial development from various perspectives

Wireless Automation as an Enabler for the Next Industrial Revolution is an excellent book for telecom engineers, IoT experts, and industry professionals. It would also greatly benefit researchers, professors, and doctorate and postgraduate students involved in automation and industry 4.0.

Innovation in healthcare is currently a “hot” topic. Innovation allows us to think differently, to take risks and to develop ideas that are far better than existing solutions. Currently, there is no single book that covers all topics related to microelectronics, sensors, data, system integration and healthcare technology assessment in one reference. This book aims to critically evaluate current state-of-the-art technologies and provide readers with insights into developing new solutions. With contributions from a fully international team of experts across electrical engineering and biomedical fields, the book discusses how advances in sensing technology, computer science, communications systems and proteomics/genomics are influencing healthcare technology today.

Innovation in healthcare is currently a “hot” topic. Innovation allows us to think differently, to take risks and to develop ideas that are far better than existing solutions. Currently, there is no single book that covers all topics related to microelectronics, sensors, data, system integration and healthcare technology assessment in one reference. This book aims to critically evaluate current state-of-the-art technologies and provide readers with insights into developing new solutions. With contributions from a fully international team of experts across electrical engineering and biomedical fields, the book discusses how advances in sensing technology, computer science, communications systems and proteomics/genomics are influencing healthcare technology today.

Innovation in healthcare is currently a “hot” topic. Innovation allows us to think differently, to take risks and to develop ideas that are far better than existing solutions. Currently, there is no single book that covers all topics related to microelectronics, sensors, data, system integration and healthcare technology assessment in one reference. This book aims to critically evaluate current state-of-the-art technologies and provide readers with insights into developing new solutions. With contributions from a fully international team of experts across electrical engineering and biomedical fields, the book discusses how advances in sensing technology, computer science, communications systems and proteomics/genomics are influencing healthcare technology today.

Backscattering and RF Sensing for Future Wireless Communication Discover what lies ahead in wireless communication networks with this insightful and forward-thinking book written by experts in the fieldBackscattering and RF Sensing for Future Wireless Communication delivers a concise and insightful picture of emerging and future trends in increasing the efficiency and performance of wireless communication networks. The book shows how the immense challenge of frequency saturation could be met via the deployment of intelligent planar electromagnetic structures. It provides an in-depth coverage of the fundamental physics behind these structures and assesses the enhancement of the performance of a communication network in challenging environments, like densely populated urban centers.The distinguished editors have included resources from a variety of leading voices in the field who discuss topics such as the engineering of metasurfaces at a large scale, the electromagnetic analysis of planar metasurfaces, and low-cost and reliable backscatter communication. All of the included works focus on the facilitation of the development of intelligent systems designed to enhance communication network performance. Readers will also benefit from the inclusion of:A thorough introduction to the evolution of wireless communication networks over the last thirty years, including the imminent saturation of the frequency spectrumAn exploration of state-of-the-art techniques that next-generation wireless networks will likely incorporate, including software-controlled frameworks involving artificial intelligenceAn examination of the scattering of electromagnetic waves by metasurfaces, including how wave propagation differs from traditional bulk materialsA treatment of the evolution of artificial intelligence in wireless communicationsPerfect for researchers in wireless communications, electromagnetics, and urban planning, Backscattering and RF Sensing for Future Wireless Communication will also earn a place in the libraries of government policy makers, technologists, and telecom industry stakeholders who wish to get a head start on understanding the technologies that will enable tomorrow’s wireless communications.

Backscattering and RF Sensing for Future Wireless Communication

Discover what lies ahead in wireless communication networks with this insightful and forward-thinking book written by experts in the field

Backscattering and RF Sensing for Future Wireless Communication delivers a concise and insightful picture of emerging and future trends in increasing the efficiency and performance of wireless communication networks. The book shows how the immense challenge of frequency saturation could be met via the deployment of intelligent planar electromagnetic structures. It provides an in-depth coverage of the fundamental physics behind these structures and assesses the enhancement of the performance of a communication network in challenging environments, like densely populated urban centers.

The distinguished editors have included resources from a variety of leading voices in the field who discuss topics such as the engineering of metasurfaces at a large scale, the electromagnetic analysis of planar metasurfaces, and low-cost and reliable backscatter communication. All of the included works focus on the facilitation of the development of intelligent systems designed to enhance communication network performance. Readers will also benefit from the inclusion of:

A thorough introduction to the evolution of wireless communication networks over the last thirty years, including the imminent saturation of the frequency spectrumAn exploration of state-of-the-art techniques that next-generation wireless networks will likely incorporate, including software-controlled frameworks involving artificial intelligenceAn examination of the scattering of electromagnetic waves by metasurfaces, including how wave propagation differs from traditional bulk materialsA treatment of the evolution of artificial intelligence in wireless communications

Perfect for researchers in wireless communications, electromagnetics, and urban planning, Backscattering and RF Sensing for Future Wireless Communication will also earn a place in the libraries of government policy makers, technologists, and telecom industry stakeholders who wish to get a head start on understanding the technologies that will enable tomorrow’s wireless communications.

Backscattering and RF Sensing for Future Wireless Communication

Discover what lies ahead in wireless communication networks with this insightful and forward-thinking book written by experts in the field

Backscattering and RF Sensing for Future Wireless Communication delivers a concise and insightful picture of emerging and future trends in increasing the efficiency and performance of wireless communication networks. The book shows how the immense challenge of frequency saturation could be met via the deployment of intelligent planar electromagnetic structures. It provides an in-depth coverage of the fundamental physics behind these structures and assesses the enhancement of the performance of a communication network in challenging environments, like densely populated urban centers.

The distinguished editors have included resources from a variety of leading voices in the field who discuss topics such as the engineering of metasurfaces at a large scale, the electromagnetic analysis of planar metasurfaces, and low-cost and reliable backscatter communication. All of the included works focus on the facilitation of the development of intelligent systems designed to enhance communication network performance. Readers will also benefit from the inclusion of:

A thorough introduction to the evolution of wireless communication networks over the last thirty years, including the imminent saturation of the frequency spectrumAn exploration of state-of-the-art techniques that next-generation wireless networks will likely incorporate, including software-controlled frameworks involving artificial intelligenceAn examination of the scattering of electromagnetic waves by metasurfaces, including how wave propagation differs from traditional bulk materialsA treatment of the evolution of artificial intelligence in wireless communications

Perfect for researchers in wireless communications, electromagnetics, and urban planning, Backscattering and RF Sensing for Future Wireless Communication will also earn a place in the libraries of government policy makers, technologists, and telecom industry stakeholders who wish to get a head start on understanding the technologies that will enable tomorrow’s wireless communications.

AUTONOMOUS AIRBORNE WIRELESS NETWORKS Discover what lies beyond the bleeding-edge of autonomous airborne networks with this authoritative new resource Autonomous Airborne Wireless Networks delivers an insightful exploration on recent advances in the theory and practice of using airborne wireless networks to provide emergency communications, coverage and capacity expansion, information dissemination, and more. The distinguished engineers and editors have selected resources that cover the fundamentals of airborne networks, including channel models, recent regulation developments, self-organized networking, AI-enabled flying networks, and notable applications in a variety of industries. The book evaluates advances in the cutting-edge of unmanned aerial vehicle wireless network technology while offering readers new ideas on how airborne wireless networks can support various applications expected of future networks. The rapidly developing field is examined from a fresh perspective, one not just concerned with ideas of control, trajectory optimization, and navigation. Autonomous Airborne Wireless Networks considers several potential use cases for the technology and demonstrates how it can be integrated with concepts from self-organized network technology and artificial intelligence to deliver results in those cases. Readers will also enjoy: A thorough discussion of distributed drone base station positioning for emergency cellular networks using reinforcement learning (AI-enabled trajectory optimization)An exploration of unmanned aerial vehicle-to-wearables (UAV2W) indoor radio propagation channel measurements and modellingAn up-to-date treatment of energy minimization in UAV trajectory design for delay tolerant emergency communicationExaminations of cache-enabled UAVs, 3D MIMO for airborne networks, and airborne networks for Internet of Things communicationsPerfect for telecom engineers and industry professionals working on identifying practical and efficient concepts tailored to overcome challenges facing unmanned aerial vehicles providing wireless communications, Autonomous Airborne Wireless Networks also has a place on the bookshelves of stakeholders, regulators, and research agencies working on the latest developments in UAV communications.

AUTONOMOUS AIRBORNE WIRELESS NETWORKS

Discover what lies beyond the bleeding-edge of autonomous airborne networks with this authoritative new resource

Autonomous Airborne Wireless Networks delivers an insightful exploration on recent advances in the theory and practice of using airborne wireless networks to provide emergency communications, coverage and capacity expansion, information dissemination, and more. The distinguished engineers and editors have selected resources that cover the fundamentals of airborne networks, including channel models, recent regulation developments, self-organized networking, AI-enabled flying networks, and notable applications in a variety of industries.

The book evaluates advances in the cutting-edge of unmanned aerial vehicle wireless network technology while offering readers new ideas on how airborne wireless networks can support various applications expected of future networks. The rapidly developing field is examined from a fresh perspective, one not just concerned with ideas of control, trajectory optimization, and navigation.

Autonomous Airborne Wireless Networks considers several potential use cases for the technology and demonstrates how it can be integrated with concepts from self-organized network technology and artificial intelligence to deliver results in those cases. Readers will also enjoy:

A thorough discussion of distributed drone base station positioning for emergency cellular networks using reinforcement learning (AI-enabled trajectory optimization) An exploration of unmanned aerial vehicle-to-wearables (UAV2W) indoor radio propagation channel measurements and modelling An up-to-date treatment of energy minimization in UAV trajectory design for delay tolerant emergency communication Examinations of cache-enabled UAVs, 3D MIMO for airborne networks, and airborne networks for Internet of Things communications

Perfect for telecom engineers and industry professionals working on identifying practical and efficient concepts tailored to overcome challenges facing unmanned aerial vehicles providing wireless communications, Autonomous Airborne Wireless Networks also has a place on the bookshelves of stakeholders, regulators, and research agencies working on the latest developments in UAV communications.

AUTONOMOUS AIRBORNE WIRELESS NETWORKS

Discover what lies beyond the bleeding-edge of autonomous airborne networks with this authoritative new resource

Autonomous Airborne Wireless Networks delivers an insightful exploration on recent advances in the theory and practice of using airborne wireless networks to provide emergency communications, coverage and capacity expansion, information dissemination, and more. The distinguished engineers and editors have selected resources that cover the fundamentals of airborne networks, including channel models, recent regulation developments, self-organized networking, AI-enabled flying networks, and notable applications in a variety of industries.

The book evaluates advances in the cutting-edge of unmanned aerial vehicle wireless network technology while offering readers new ideas on how airborne wireless networks can support various applications expected of future networks. The rapidly developing field is examined from a fresh perspective, one not just concerned with ideas of control, trajectory optimization, and navigation.

Autonomous Airborne Wireless Networks considers several potential use cases for the technology and demonstrates how it can be integrated with concepts from self-organized network technology and artificial intelligence to deliver results in those cases. Readers will also enjoy:

A thorough discussion of distributed drone base station positioning for emergency cellular networks using reinforcement learning (AI-enabled trajectory optimization) An exploration of unmanned aerial vehicle-to-wearables (UAV2W) indoor radio propagation channel measurements and modelling An up-to-date treatment of energy minimization in UAV trajectory design for delay tolerant emergency communication Examinations of cache-enabled UAVs, 3D MIMO for airborne networks, and airborne networks for Internet of Things communications

Perfect for telecom engineers and industry professionals working on identifying practical and efficient concepts tailored to overcome challenges facing unmanned aerial vehicles providing wireless communications, Autonomous Airborne Wireless Networks also has a place on the bookshelves of stakeholders, regulators, and research agencies working on the latest developments in UAV communications.

Intelligent Reconfigurable Surfaces (IRS) for Prospective 6G Wireless Networks Authoritative resource covering preliminary concepts and advanced concerns in the field of IRS and its role in 6G wireless systems Intelligent Reconfigurable Surfaces (IRS) for Prospective 6G Wireless Networks provides an in-depth treatment of the fundamental physics behind reconfigurable metasurfaces, also known as intelligent reflecting surfaces (IRS), and outlines the research roadmap towards their development as a low-complexity and energy-efficient solution aimed at turning the wireless environment into a software-defined entity. The text demonstrates IRS from different angles, including the underlying physics, hardware architecture, operating principles, and prototype designs. It enables readers to grasp the knowledge of the interplay of IRS and state-of-the-art technologies, examining the advantages, key principles, challenges, and potential use-cases. Practically, it equips readers with the fundamental knowledge of the operational principles of reconfigurable metasurfaces, resulting in its potential applications in various intelligent, autonomous future wireless communication technologies. To aid in reader comprehension, around 50 figures, tables, illustrations, and photographs to comprehensively present the material are also included. Edited by a team of highly qualified professionals in the field, sample topics covered are as follows: Evolution of antenna arrays design, introducing the fundamental principles of antenna theory and reviewing the stages of development of the field;Beamforming design for IRS-assisted communications, discussing optimal IRS configuration in conjunction with overviewing novel beamforming designs;Reconfigurable metasurfaces from physics to applications, discussing the working principles of tunable/reconfigurable metasurfaces and their capabilities and functionalities;IRS hardware architectures, detailing the general hardware architecture of IRS and features related to the IRS’s main operational principle;Wireless communication systems assisted by IRS, discussing channel characterization, system integration, and aspects related to the performance analysis and network optimization of state-of-the-art wireless applications.For students and engineers in wireless communications, microwave engineering, and radio hardware and design, Intelligent Reconfigurable Surfaces (IRS) for Prospective 6G Wireless Networks serves as an invaluable resource on the subject and is a useful course accompaniment for general Antenna Theory, Microwave Engineering, Electromagnetics courses.

Intelligent Reconfigurable Surfaces (IRS) for Prospective 6G Wireless Networks

Authoritative resource covering preliminary concepts and advanced concerns in the field of IRS and its role in 6G wireless systems

Intelligent Reconfigurable Surfaces (IRS) for Prospective 6G Wireless Networks provides an in-depth treatment of the fundamental physics behind reconfigurable metasurfaces, also known as intelligent reflecting surfaces (IRS), and outlines the research roadmap towards their development as a low-complexity and energy-efficient solution aimed at turning the wireless environment into a software-defined entity.

The text demonstrates IRS from different angles, including the underlying physics, hardware architecture, operating principles, and prototype designs. It enables readers to grasp the knowledge of the interplay of IRS and state-of-the-art technologies, examining the advantages, key principles, challenges, and potential use-cases. Practically, it equips readers with the fundamental knowledge of the operational principles of reconfigurable metasurfaces, resulting in its potential applications in various intelligent, autonomous future wireless communication technologies.

To aid in reader comprehension, around 50 figures, tables, illustrations, and photographs to comprehensively present the material are also included.

Edited by a team of highly qualified professionals in the field, sample topics covered are as follows:

Evolution of antenna arrays design, introducing the fundamental principles of antenna theory and reviewing the stages of development of the field; Beamforming design for IRS-assisted communications, discussing optimal IRS configuration in conjunction with overviewing novel beamforming designs; Reconfigurable metasurfaces from physics to applications, discussing the working principles of tunable/reconfigurable metasurfaces and their capabilities and functionalities; IRS hardware architectures, detailing the general hardware architecture of IRS and features related to the IRS’s main operational principle; Wireless communication systems assisted by IRS, discussing channel characterization, system integration, and aspects related to the performance analysis and network optimization of state-of-the-art wireless applications.

For students and engineers in wireless communications, microwave engineering, and radio hardware and design, Intelligent Reconfigurable Surfaces (IRS) for Prospective 6G Wireless Networks serves as an invaluable resource on the subject and is a useful course accompaniment for general Antenna Theory, Microwave Engineering, Electromagnetics courses.

Intelligent Reconfigurable Surfaces (IRS) for Prospective 6G Wireless Networks

Authoritative resource covering preliminary concepts and advanced concerns in the field of IRS and its role in 6G wireless systems

Intelligent Reconfigurable Surfaces (IRS) for Prospective 6G Wireless Networks provides an in-depth treatment of the fundamental physics behind reconfigurable metasurfaces, also known as intelligent reflecting surfaces (IRS), and outlines the research roadmap towards their development as a low-complexity and energy-efficient solution aimed at turning the wireless environment into a software-defined entity.

The text demonstrates IRS from different angles, including the underlying physics, hardware architecture, operating principles, and prototype designs. It enables readers to grasp the knowledge of the interplay of IRS and state-of-the-art technologies, examining the advantages, key principles, challenges, and potential use-cases. Practically, it equips readers with the fundamental knowledge of the operational principles of reconfigurable metasurfaces, resulting in its potential applications in various intelligent, autonomous future wireless communication technologies.

To aid in reader comprehension, around 50 figures, tables, illustrations, and photographs to comprehensively present the material are also included.

Edited by a team of highly qualified professionals in the field, sample topics covered are as follows:

Evolution of antenna arrays design, introducing the fundamental principles of antenna theory and reviewing the stages of development of the field; Beamforming design for IRS-assisted communications, discussing optimal IRS configuration in conjunction with overviewing novel beamforming designs; Reconfigurable metasurfaces from physics to applications, discussing the working principles of tunable/reconfigurable metasurfaces and their capabilities and functionalities; IRS hardware architectures, detailing the general hardware architecture of IRS and features related to the IRS’s main operational principle; Wireless communication systems assisted by IRS, discussing channel characterization, system integration, and aspects related to the performance analysis and network optimization of state-of-the-art wireless applications.

For students and engineers in wireless communications, microwave engineering, and radio hardware and design, Intelligent Reconfigurable Surfaces (IRS) for Prospective 6G Wireless Networks serves as an invaluable resource on the subject and is a useful course accompaniment for general Antenna Theory, Microwave Engineering, Electromagnetics courses.

Recent advancements in carbon and molecular electronics have opened the door to a new generation of electronic nanoscale components. This book outlines the basic principles of electromagnetic-based communication at this nanoscale using terahertz and optical frequencies with a focus on theoretical principles and applications. It answers the questions: How can nano-devices communicate with each other by applying electromagnetic techniques? Do conventional communication and networking schemes and principles still apply? How feasible is it to deploy such networks with various applications?Topics covered include an introduction to nano-communication; fundamentals and applications of nano-electromagnetic communications; simulation and experimental platforms for nano-electromagnetic communication networks; terahertz antenna design for wearable applications; terahertz application in food contamination detection; channel modelling for electromagnetic nano-communication; modulation, coding and synchronization techniques for nano-electromagnetic communications in the terahertz band; routing protocols for nano-electromagnetic communication networks; error control mechanisms for nano-electromagnetic communication networks; and conclusion and future outlook.

Transforming the way we live, work, and engage with our environment, 5G and beyond technologies will provide much higher bandwidth and connectivity to billions of devices. This brings enormous opportunities but of course the widespread deployment of these technologies faces challenges, including the need for reliable connectivity, a diverse range of bandwidths, dynamic spectrum sharing, channel modelling and wave propagation for ultra-dense wireless networks, as well as price pressures. The choice of an antenna system will also be a critical component of all node end devices and will present several design challenges such as size, purpose, shape and placement. In this edited book, the authors bring new approaches for exploiting challenging propagation channels and the development of efficient, cost-effective, scalable, and reliable antenna systems and solutions, as well as future perspectives.The book is aimed at a wide audience of industry and academic researchers, scientists and engineers as well as advanced students in the field of antennas, ICTs, signal processing and electromagnetics. It will also be useful to network and system designers, developers and manufacturers. Stakeholders, government regulators, policy makers and standards bodies can use the information provided here to better understand the effects of the technology on the market and future developments for 5G and beyond systems and networks.

Body centric wireless networking and communications is an emerging 4G technology for short (1-5 m) and very short (below 1 m) range communications systems, used to connect devices worn on (or in) the body, or between two people in close proximity. It has great potential for applications in healthcare delivery, entertainment, surveillance, and emergency services. This book brings together contributions from a multidisciplinary team of researchers in the field of wireless and mobile communications, signal processing and medical measurements to present the underlying theory, implementation challenges and applications of this exciting new technology.Topics covered include: diversity and cooperative communications in body area networks; ultra wideband radio channel characterisation for body-centric wireless communication; sparse characterisation of body-centric radio channels; antenna / human body interactions in the 60 GHz band; antennas for ingestible capsule telemetry; in vivo wireless channel modelling; diversity and MIMO for efficient front-end design of body-centric wireless communications devices; on-body antennas and radio channels for GPS applications; textile substrate integrated waveguide technology for the next-generation wearable microwave systems; ultra wideband body-centric networks for localisation and motion capture application; down scaling to the nano-scale in body-centric nano-networks; and the road ahead for body-centric wireless communication and networks.

This book is focused on wireless infrastructure deployment in modern transportation markets, where the wireless infrastructure co-exists with the existing structure.