Robin Fell – författare

This book provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The book provides dam engineers and geologists with a practical approach, and gives university students an insight into the subject of dam engineering. All phases of investigation, design and construction are covered, through to the preliminary and detailed design phases and ultimately the construction phase. This revised and expanded 2nd edition includes a lengthy new chapter on the assessment of the likelihood of failure of dams by internal erosion and piping.

Internal erosion and piping in embankments and their foundations is the main cause of failures and accidents to embankment dams. For new dams, the potential for internal erosion and piping can be controlled by good design and construction of the core of the dam and provision of filters to intercept seepage through the embankment and the foundations. This book presents selected and reviewed papers from the Workshop on Internal Erosion and Piping of Dams and their Foundations, which was held from 25 to 27 April, 2005 in Aussois, France. The book covers the whole internal erosion process, from initiation of erosion, continuation, progression to form a pipe, and formation of a breach. An overview paper based on the papers and discussion at the Workshop describes the state of the art and research needs. Internal Erosion of Dams and their Foundations will be most valuable to dam engineers, researchers and students who are involved in assessing the safety of embankment dams from internal erosion and piping.

Many existing embankment dams were designed and constructed to standards below current requirements, potentially posing risks to downstream populations. Dam owners must assess whether these structures provide adequate safety or require upgrades to reduce risks to acceptable levels. This book provides in-depth analysis of dam failure mechanics alongside relevant engineering assessment methods.The book provides comprehensive methods for assessing embankment dam safety across four critical failure modes: overtopping, slope instability, deformations under seismic loading, and internal erosion and piping. Assessment approaches include deterministic (standards-based), risk enhanced deterministic, quantitative risk assessment (QRA) and simplified QRA methodologies. These approaches represent current industry practice, drawing from the authors' extensive experience in dam safety assessment and upgrade design across more than 200 dams in Australia, New Zealand, Canada, the USA and Panama.The book is designed to help dam owners, their consultant engineers and engineering geologists develop defensible safety assessments and upgrade designs for existing dams.

Landslide Risk Management comprises the proceedings of the International Conference on Landslide Risk Management, held in Vancouver, Canada, from May 31 to June 3, 2005. The first part of the book contains state-of-the-art and invited lectures, prepared by teams of authors selected for their experience in specific topics assigned to them by the JTC

Internal erosion and piping in embankments and their foundations is the main cause of failures and accidents to embankment dams. For new dams, the potential for internal erosion and piping can be controlled by good design and construction of the core of the dam and provision of filters to intercept seepage through the embankment and the foundations

Many existing embankment dams were designed and constructed to standards below current requirements, potentially posing risks to downstream populations. Dam owners must assess whether these structures provide adequate safety or require upgrades to reduce risks to acceptable levels. This book provides in-depth analysis of dam failure mechanics alongside relevant engineering assessment methods.The book provides comprehensive methods for assessing embankment dam safety across four critical failure modes: overtopping, slope instability, deformations under seismic loading, and internal erosion and piping. Assessment approaches include deterministic (standards-based), risk enhanced deterministic, quantitative risk assessment (QRA) and simplified QRA methodologies. These approaches represent current industry practice, drawing from the authors' extensive experience in dam safety assessment and upgrade design across more than 200 dams in Australia, New Zealand, Canada, the USA and Panama.The book is designed to help dam owners, their consultant engineers and engineering geologists develop defensible safety assessments and upgrade designs for existing dams.

Many existing embankment dams were designed and constructed to standards below current requirements, potentially posing risks to downstream populations. Dam owners must assess whether these structures provide adequate safety or require upgrades to reduce risks to acceptable levels. This book provides in-depth analysis of dam failure mechanics alongside relevant engineering assessment methods.The book provides comprehensive methods for assessing embankment dam safety across four critical failure modes: overtopping, slope instability, deformations under seismic loading, and internal erosion and piping. Assessment approaches include deterministic (standards-based), risk enhanced deterministic, quantitative risk assessment (QRA) and simplified QRA methodologies. These approaches represent current industry practice, drawing from the authors' extensive experience in dam safety assessment and upgrade design across more than 200 dams in Australia, New Zealand, Canada, the USA and Panama.The book is designed to help dam owners, their consultant engineers and engineering geologists develop defensible safety assessments and upgrade designs for existing dams.

Comprises the proceedings of a conference on geotechnical waste management and contamination. Coverage ranges from remediation of contaminated sites to design and management of landfills. There are also papers dealing with case histories and research.Contents: Groundwater contamination flow; Regulatory, & non regulatory controls for contaminated sites; Remediation of contaminated sites; Ground modification techniques in waste management;

Comprises the proceedings of a conference on geotechnical waste management and contamination. Coverage ranges from remediation of contaminated sites to design and management of landfills. There are also papers dealing with case histories and research.Contents: Groundwater contamination flow; Regulatory, & non regulatory controls for contaminated sites; Remediation of contaminated sites; Ground modification techniques in waste management;

This book provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The book provides dam engineers and geologists with a practical approach, and gives university students an insight into the subject of dam engineering. All phases of investigation, design and construction are covered, through to the preliminary and detailed design phases and ultimately the construction phase. This revised and expanded 2nd edition includes a lengthy new chapter on the assessment of the likelihood of failure of dams by internal erosion and piping.

Geotechnical Engineering of Dams, 2nd edition provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The main emphasis of this work is on embankment dams, but much of the text, particularly those parts related to geology, can be used for concrete gravity and arch dams.All phases of investigation, design and construction are covered. Detailed descriptions are given from the initial site assessment and site investigation program through to the preliminary and detailed design phases and, ultimately, the construction phase. The assessment of existing dams, including the analysis of risks posed by those dams, is also discussed. This wholly revised and significantly expanded 2nd edition includes a lengthy new appendix on the assessment of the likelihood of failure of dams by internal erosion and piping.This valuable source on dam engineering incorporates the 200+ years of collective experience of the authors in the subject area. Design methods are presented in combination with their theoretical basis, to enable the reader to develop a proper understanding of the possibilities and limitations of a method. For its practical, well-founded approach, this work can serve as a useful guide for professional dam engineers and engineering geologists and as a textbook for university students.

Geotechnical Engineering of Dams, 2nd edition provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The main emphasis of this work is on embankment dams, but much of the text, particularly those parts related to geology, can be used for concrete gravity and arch dams.All phases of investigation, design and construction are covered. Detailed descriptions are given from the initial site assessment and site investigation program through to the preliminary and detailed design phases and, ultimately, the construction phase. The assessment of existing dams, including the analysis of risks posed by those dams, is also discussed. This wholly revised and significantly expanded 2nd edition includes a lengthy new appendix on the assessment of the likelihood of failure of dams by internal erosion and piping.This valuable source on dam engineering incorporates the 200+ years of collective experience of the authors in the subject area. Design methods are presented in combination with their theoretical basis, to enable the reader to develop a proper understanding of the possibilities and limitations of a method. For its practical, well-founded approach, this work can serve as a useful guide for professional dam engineers and engineering geologists and as a textbook for university students.

Landslide Risk Management comprises the proceedings of the International Conference on Landslide Risk Management, held in Vancouver, Canada, from May 31 to June 3, 2005. The first part of the book contains state-of-the-art and invited lectures, prepared by teams of authors selected for their experience in specific topics assigned to them by the JTC

Internal erosion and piping in embankments and their foundations is the main cause of failures and accidents to embankment dams. For new dams, the potential for internal erosion and piping can be controlled by good design and construction of the core of the dam and provision of filters to intercept seepage through the embankment and the foundations

Comprises the proceedings of a conference on geotechnical waste management and contamination. Coverage ranges from remediation of contaminated sites to design and management of landfills. There are also papers dealing with case histories and research.Contents: Groundwater contamination flow; Regulatory, & non regulatory controls for contaminated sites; Remediation of contaminated sites; Ground modification techniques in waste management;