Srichand Hinduja and Lin Li both work in the School of Mechanical, Aerospace and Civil Engineering at The University of Manchester, Manchester, UK.

• 1–1. Robust Control Strategy of Fluid Dispensing Process for Solid Freeform Fabrication of Tissue Engineered Hydrogel Scaffold.- 1–2. An innovative approach for the fabrication of highly conductive nanocomposites with different carbon.- 1–3. Analysis of local field enhancement including tip interaction for the application to nano-manipulation using FDTD calculations.- 2–1. Numerical Simulation of the Four Roll Bending Process.- 2–2. Investigation on the Process Parameters and Process Window of Three-Roll-Push-Bending.- 2–3. Casting of Aluminium Alloy Strop by Improved Single-Roll Caster.- 2–4. Casting of Al-Si-SiCp composite alloy strip by a vertical type twin roll caster.- 2–5. Casting of aluminium alloy clad strip using a vertical type tandem twin roll caster.- 2–6. Micro-forming of aluminum alloy by cold rolling.- 2–7. Rapid shape measurement of micro deep drawing parts by means of digital holographic contouring.- 2–8. Fracture Limits of Metal Foils in Micro Forming.- 2–9. A theoretical model for the velocity field of the extrusion of shaped sections taking into account the variation of the axial component.- 2–10. A theoretical model for the material flow for the forward extrusion of complicated and non-symmetric sections.- 2–11. An Optimization Algorithm for Improving Combined Multi-Stage Deep-Drawing and Ironing Processes of Axisymmetric Components. Analysis and Experimentation.- 2–12. Nanofinishing Process for 3D Freeform Surfaces Using Ball End MR Finishing Tool.- 2–13. Pressure Distribution in Cold Rolling of Turbo-engine Thin Compressor Blades.- 2–14. Determination of the duty cycle in thermoset pultrusion.- 2–15. Development of New Press-Forming Process for a Screw-Threaded Fuel Filler Pipe.- 2–16. Roller Hemming: A NewSimulation Model for the Automotive Industry.- 2–17. Control of the uniformity of direct electrical heating for Rotational Moulding.- 3–1. High Efficiency Deep Grinding, an Application withconventional wheels.- 3–2. Detection of High and Low Temperature in the Grinding Zone using Laser Irradiation Technique.- 3–3. Investigation of Influences of Wheel Speed on Root Geometrical Dimension of Gas Turbine Blade.- 3–4. Ultra-fine Finishing of Metallic surfaces with Ice Bonded Abrasive Polishing Process.- 3–5. Plane surface grinding with application of Minimum Quantity Lubrication (MQL).- 3–6. Study of the Behavior of Air Flow around a Grinding Wheel under the Application of Pneumatic Barrier.- 4–1. A cutting plane algorithm for solving single machine scheduling problems with uncertain sequence-dependent setup times.- 4–2. A Knowledge-Based Engineering System for Assembly Sequence Planning.- 4–3. Product Family Modeling and Optimization Driven by Customer Requirements.- 4–4. Transparency in Production by Monitoring the Condition of Molds, Dies and Machines.- 4–5. Simulation Modelling of Product-Service Systems: the Missing Link.- 4–6. RFID Deployment at an Airport: A Simulation Study.- 5–1. Failure knowledge based decision-making in product quality.- 5–2. Predicting the End-Of-Life of Defence Electronic Systems at the Conceptual Design Stage.- 5–3. Design of Multi-Span Microfixturing Cell for Parallel Assembly of Microparts Using Electrothermally Actuated Microclamps.- 5–4. An Evaluation Method Based on Multiple Quality Characteristics for CNC Machining Center using Fuzzy Matter Element.- 5–5. Design of a Meso-scale 3-axis Milling with Nanometer Accuracy.- 5–6.A Novel Concept to Design Machine Tool Structures using MultifunctionalMaterials.- 5–7. Design Synthesis of a three legged SPS Parallel Manipulator.- 5–8. Piezo-Metal-Composites as Smart Structures.- 5–9. A methodology for Engineering Design Change Managment Using Modelling and Problem Solving Techniques.- 5–10. Modeling and Analysis of the strength of Adhesively Bond CFRP-Aluminium T-joints.- 6–1. Modelling of Machine Tapping with Straight Flute Taps.-

Srichand Hinduja and Lin Li both work in the School of Mechanical, Aerospace and Civil Engineering at The University of Manchester, Manchester, UK.

• 1–1. Robust Control Strategy of Fluid Dispensing Process for Solid Freeform Fabrication of Tissue Engineered Hydrogel Scaffold.- 1–2. An innovative approach for the fabrication of highly conductive nanocomposites with different carbon.- 1–3. Analysis of local field enhancement including tip interaction for the application to nano-manipulation using FDTD calculations.- 2–1. Numerical Simulation of the Four Roll Bending Process.- 2–2. Investigation on the Process Parameters and Process Window of Three-Roll-Push-Bending.- 2–3. Casting of Aluminium Alloy Strop by Improved Single-Roll Caster.- 2–4. Casting of Al-Si-SiCp composite alloy strip by a vertical type twin roll caster.- 2–5. Casting of aluminium alloy clad strip using a vertical type tandem twin roll caster.- 2–6. Micro-forming of aluminum alloy by cold rolling.- 2–7. Rapid shape measurement of micro deep drawing parts by means of digital holographic contouring.- 2–8. Fracture Limits of Metal Foils in Micro Forming.- 2–9. A theoretical model for the velocity field of the extrusion of shaped sections taking into account the variation of the axial component.- 2–10. A theoretical model for the material flow for the forward extrusion of complicated and non-symmetric sections.- 2–11. An Optimization Algorithm for Improving Combined Multi-Stage Deep-Drawing and Ironing Processes of Axisymmetric Components. Analysis and Experimentation.- 2–12. Nanofinishing Process for 3D Freeform Surfaces Using Ball End MR Finishing Tool.- 2–13. Pressure Distribution in Cold Rolling of Turbo-engine Thin Compressor Blades.- 2–14. Determination of the duty cycle in thermoset pultrusion.- 2–15. Development of New Press-Forming Process for a Screw-Threaded Fuel Filler Pipe.- 2–16. Roller Hemming: A NewSimulation Model for the Automotive Industry.- 2–17. Control of the uniformity of direct electrical heating for Rotational Moulding.- 3–1. High Efficiency Deep Grinding, an Application withconventional wheels.- 3–2. Detection of High and Low Temperature in the Grinding Zone using Laser Irradiation Technique.- 3–3. Investigation of Influences of Wheel Speed on Root Geometrical Dimension of Gas Turbine Blade.- 3–4. Ultra-fine Finishing of Metallic surfaces with Ice Bonded Abrasive Polishing Process.- 3–5. Plane surface grinding with application of Minimum Quantity Lubrication (MQL).- 3–6. Study of the Behavior of Air Flow around a Grinding Wheel under the Application of Pneumatic Barrier.- 4–1. A cutting plane algorithm for solving single machine scheduling problems with uncertain sequence-dependent setup times.- 4–2. A Knowledge-Based Engineering System for Assembly Sequence Planning.- 4–3. Product Family Modeling and Optimization Driven by Customer Requirements.- 4–4. Transparency in Production by Monitoring the Condition of Molds, Dies and Machines.- 4–5. Simulation Modelling of Product-Service Systems: the Missing Link.- 4–6. RFID Deployment at an Airport: A Simulation Study.- 5–1. Failure knowledge based decision-making in product quality.- 5–2. Predicting the End-Of-Life of Defence Electronic Systems at the Conceptual Design Stage.- 5–3. Design of Multi-Span Microfixturing Cell for Parallel Assembly of Microparts Using Electrothermally Actuated Microclamps.- 5–4. An Evaluation Method Based on Multiple Quality Characteristics for CNC Machining Center using Fuzzy Matter Element.- 5–5. Design of a Meso-scale 3-axis Milling with Nanometer Accuracy.- 5–6.A Novel Concept to Design Machine Tool Structures using MultifunctionalMaterials.- 5–7. Design Synthesis of a three legged SPS Parallel Manipulator.- 5–8. Piezo-Metal-Composites as Smart Structures.- 5–9. A methodology for Engineering Design Change Managment Using Modelling and Problem Solving Techniques.- 5–10. Modeling and Analysis of the strength of Adhesively Bond CFRP-Aluminium T-joints.- 6–1. Modelling of Machine Tapping with Straight Flute Taps.-

Srichand Hinduja and Lin Li both work in the School of Mechanical, Aerospace and Civil Engineering at The University of Manchester, Manchester, UK.

• 1–1. Robust Control Strategy of Fluid Dispensing Process for Solid Freeform Fabrication of Tissue Engineered Hydrogel Scaffold.- 1–2. An innovative approach for the fabrication of highly conductive nanocomposites with different carbon.- 1–3. Analysis of local field enhancement including tip interaction for the application to nano-manipulation using FDTD calculations.- 2–1. Numerical Simulation of the Four Roll Bending Process.- 2–2. Investigation on the Process Parameters and Process Window of Three-Roll-Push-Bending.- 2–3. Casting of Aluminium Alloy Strop by Improved Single-Roll Caster.- 2–4. Casting of Al-Si-SiCp composite alloy strip by a vertical type twin roll caster.- 2–5. Casting of aluminium alloy clad strip using a vertical type tandem twin roll caster.- 2–6. Micro-forming of aluminum alloy by cold rolling.- 2–7. Rapid shape measurement of micro deep drawing parts by means of digital holographic contouring.- 2–8. Fracture Limits of Metal Foils in Micro Forming.- 2–9. A theoretical model for the velocity field of the extrusion of shaped sections taking into account the variation of the axial component.- 2–10. A theoretical model for the material flow for the forward extrusion of complicated and non-symmetric sections.- 2–11. An Optimization Algorithm for Improving Combined Multi-Stage Deep-Drawing and Ironing Processes of Axisymmetric Components. Analysis and Experimentation.- 2–12. Nanofinishing Process for 3D Freeform Surfaces Using Ball End MR Finishing Tool.- 2–13. Pressure Distribution in Cold Rolling of Turbo-engine Thin Compressor Blades.- 2–14. Determination of the duty cycle in thermoset pultrusion.- 2–15. Development of New Press-Forming Process for a Screw-Threaded Fuel Filler Pipe.- 2–16. Roller Hemming: A NewSimulation Model for the Automotive Industry.- 2–17. Control of the uniformity of direct electrical heating for Rotational Moulding.- 3–1. High Efficiency Deep Grinding, an Application withconventional wheels.- 3–2. Detection of High and Low Temperature in the Grinding Zone using Laser Irradiation Technique.- 3–3. Investigation of Influences of Wheel Speed on Root Geometrical Dimension of Gas Turbine Blade.- 3–4. Ultra-fine Finishing of Metallic surfaces with Ice Bonded Abrasive Polishing Process.- 3–5. Plane surface grinding with application of Minimum Quantity Lubrication (MQL).- 3–6. Study of the Behavior of Air Flow around a Grinding Wheel under the Application of Pneumatic Barrier.- 4–1. A cutting plane algorithm for solving single machine scheduling problems with uncertain sequence-dependent setup times.- 4–2. A Knowledge-Based Engineering System for Assembly Sequence Planning.- 4–3. Product Family Modeling and Optimization Driven by Customer Requirements.- 4–4. Transparency in Production by Monitoring the Condition of Molds, Dies and Machines.- 4–5. Simulation Modelling of Product-Service Systems: the Missing Link.- 4–6. RFID Deployment at an Airport: A Simulation Study.- 5–1. Failure knowledge based decision-making in product quality.- 5–2. Predicting the End-Of-Life of Defence Electronic Systems at the Conceptual Design Stage.- 5–3. Design of Multi-Span Microfixturing Cell for Parallel Assembly of Microparts Using Electrothermally Actuated Microclamps.- 5–4. An Evaluation Method Based on Multiple Quality Characteristics for CNC Machining Center using Fuzzy Matter Element.- 5–5. Design of a Meso-scale 3-axis Milling with Nanometer Accuracy.- 5–6.A Novel Concept to Design Machine Tool Structures using MultifunctionalMaterials.- 5–7. Design Synthesis of a three legged SPS Parallel Manipulator.- 5–8. Piezo-Metal-Composites as Smart Structures.- 5–9. A methodology for Engineering Design Change Managment Using Modelling and Problem Solving Techniques.- 5–10. Modeling and Analysis of the strength of Adhesively Bond CFRP-Aluminium T-joints.- 6–1. Modelling of Machine Tapping with Straight Flute Taps.-