Exergy for A Better Environment and Improved Sustainability 1

Ibrahim Dincer is a Professor at the Department of Automotive, Mechanical and Manufacturing Engineering Faculty of Engineering and Applied Science, at the University of Ontario Institute of Technology. He's an Editor-in-Chief of three academic journals and a board member for many more. He is the author and editor of numerous Springer titles.Aloui Fethi is a Professor at the University of Valenciennes with interests in fluid mechanics, energetics, inverse methods among others.

• Part 1: Heat and mass transfer, and fluid mechanics.- Chapter1. Dynamic Study of a Metal Hydride Pump.- Chapter2. Unsteady Aerodynamic Analysis of Different Multi MW Horizontal Axis Wind Turbine Blade Profiles on SST-K-ω.- Chapter3.  Productivity Analysis and Numerical Simulation for Fractured Wells in Unconventional Gas Reservoirs.- Chapter4. Study of Porous Flow Mechanism for Low Permeability Sandstone by Use of NMR.- Chapter5. Thermal and Dynamic characteristics of an Airflow in a Channel Provided with Circular and Triangular Cavities.- Chapter6. Turbulent Air Flow Investigation through the Vaned Diffuser Turbocharger using CFD.- Chapter7. Some Measurements in Multiple Jets.- Chapter8. Study of Growth Rate in Turbulent Mixing Layers.-Chapter9. Natural Convection Heat Transfer of Water-Based CuO and Water-Based Al2O3 Nanofluids Through A Horizontal Plate.- Chapter10.  Analysis of Coriolis Effect in a Curved Pipe Conveying Hydrogen Using Timoshenko Beam Element.- Chapter11. Inverse Design Method of Wind Turbine in Solar Chimney Power Plants Coupled with Geothermal Energy.- Chapter12. The Techniques Used for Performance Prediction of Vertical Axis Wind Turbines.- Chapter13. Modeling and Numerical Investigation of Latent Heat Storage Unit Using Paraffin Wax.- Chapter14. Investigation of Effective Parameters on the Human Body Exergy and Energy Model.- Chapter15. Motion of a Solid Particle in a Water Flow Inside a Pipe.- Chapter16. Numerical Modeling and Performance Optimization Study of a Cavity Receiver in Solar Tower.- Chapter17. Parametric Study on Thermal Performance of PCM-Heat Sink Used for Electronic Cooling.- Chapter18. Aerodynamic and Energy Analysis of an Industrial Wind Turbine.-Chapter19. A CFD Analysis of the Air Flow through the Stirling Engine’s Singularities.- Chapter20. Modelling Energetic Efficiency of Coil Annealing Using Hydrogen Gas.- Chapter21. Modelling of Flat Plate and V-Corrugated Solar Air Heaters for Single and Counter Flow OperatingModes.- Chapter22. Parametric Numerical Study of Blood Flow Analysis in idealized Abdominal Aortic Aneurysms Geometries.- Chapter23. Experimental Investigation of Surface Flow Structure over Non-Slender Diamond Wing.- Chapter24. Experimental Investigations on Condensation of Steam in Microchannels.- Chapter25. Development of a CFD Model for Prediction of a Natural Gas Fuelled HCCI Engine Combustion and Performance Characteristics Employing a New Reduced Chemical Kinetic Mech.-Chapter26. Modeling of Wind Loads on Heliostats Installed in South Algeria for Various Pylon Height.- Chapter27.  Experimental Investigations of the Effect of the Enrichment with Oxygen on the Stability of the Diffusion Flame from Burners with Separate Injections.- Chapter28.  Prediction of Heat and Mass Transfer within a Metal-Hydrogen Reactor Using the Lattice Boltzmann Method.-Chapter29. Experimental and Theoretical Investigation of Flows inside a Gamma Stirling Engine Regenerator.-Chapter30. Secondary Migration of Fang Crude Petroleum Related to Volumetric Flow Rate.- Chapter31. Characteristic of Savonius vertical axis rotor in water channel.-Chapter32. Hydrodynamics Design of a Tunnel Submarine with Dimension Analysis.- Chapter33. Aerodynamic performances of Pitching wind air-foil using unsteady panel method.- Chapter34. Mathematical Modeling of heat and mass transfers in Humidifiers.- Chapter35. Heat and Mass Transfer during Hydriting.- Chapter36. Numerical and Dynamic Study of Flow Instabilities and Heat Transfer at a Backward Facing Step Using the Lattice Boltzmann Method.- Chapter37. Experimental investigations on oscillatory Couette-Taylor Flow wall shear stress behaviour using electrochemical technique: High modulation effect.- Chapter38. Boundary layer separation on an airfoil at a low Reynolds number.- Chapter39. Experimental Investigations of Taylor-Couette Flow Using PIV and Electrochemical Techniques.- Chapter40. Radial distribution of mass transfer and wall shear instantaneousrates in Couette-Taylor flow.- Chapter41. Testing and Analysis of R134a Clathrates with Additives for Cooling Applications.- Chapter42. A new analytical relation for performance of small regenerative turbine pumps.- Chapter43. Quantitative evaluation of influential coefficients of regenerative pumps.- Chapter44. Recovery of Waste Farm after Methanization by Evaporation on Inclined Plate.- Chapter45. Large Eddy Simulation based Lattice Boltzmann Method with different collision models.- Part2: Exergy and energy analyses and assessments.- Chapter46. Electrochemical, energy, exergy and exergoeconomic analyses of hybrid photocatalytic hydrogen production reactor for Cu-Cl Cycle.- Chapter47. LiBr Absorption Systems Integrated with High–Efficiency IGSG Plant.- Chapter48. The Effect of Ambient Temperature to Tabriz Power Plant Efficiency.- Chapter49. Energy and Exergy Analysis of Tabriz Power Plant for Different Loads.- Chapter50. Second Law Analysis of an Experimental Micro Turbojet Engine.-Chapter51. Effect of Thermal Conductivity of the Phase Change Material (PCM) on the Absorption Process of a Metal-Hydrogen Reactor.- Chapter52. Energy and exergy analysis of a solar-hydrogen hybrid renewable energy system in Ankara, Turkey.- Chapter53. Thermodynamic Analysis of Inlet Air cooling system for a centrifugal compressor.- Chapter54. A study on the Charge Discharge Cycle of a Compressed Hydrogen Tank for Automobiles.- Chapter55. Integration of Pulse Combustion in Air Bottoming Cycle Power Plants.- Chapter56. Multi-objective Optimization of a Cogeneration of Power and Heat in a Combined Gas Turbine and organic Rankine cycle.- Chapter57. Exergetic and Environmental Analysis of 100 MW Intercooled Gas Turbine Engine.- Chapter58. Experimental Analysis and Thermodynamic Modeling of an Absorption-Diffusion Refrigerator.- Chapter59. Exergoeconomic Approaches.- Chapter60. Exergy and Energy Analysis of an Aircraft Air Cycle Machine at Designated Altitude.- Chapter61. Integrated Modelof Horizontal Earth Pipe Cooling System for a Hot Humid Climate.- Chapter62. Waste Heat Recovery in a Sulfuric Acid Production Unit.- Chapter63. Comparative Energy, Exergy and Environmental Analyses of Parabolic Trough Solar Thermal Power Plant Using Nanofluids.- Chapter64. Exergetic Simulation and Performance Assessment of 1-1 Shell and Tube Heat Exchangers.- Chapter65. Parametric Exergetic Investigation of a Direct Formic Acid Fuel Cell System.- Chapter66. Experimental and Numerical Investigations of a Small Turbojet Engine with the Aid of Exergy.- Chapter67. Progress in High Performances, Low emissions and Exergy Recovery in Internal Combustion Engines.- Chapter68. Thermoeconomic Multi-Objective Optimization of an Ammonia-Water Power/Cooling Cycle coupled with a HCCI Engine.- Chapter69. Exergetic Optimisation of Atmospheric and Vacuum Distillation System Based on Bootstrap Aggregated Neural Network Models.- Chapter70. Modeling, simulation and optimization of solar assisted absorption cooling systems.- Chapter71. Exergetic Evaluation for Heat Exchanger Network in a Raw Petroleum Cracking Unit.-  Chapter72. Design of an Inlet Air Cooling System for a Gas-Turbine Power Plant.- Chapter73. Exergetic Analysis of a Gas Turbine with Inlet Air Cooling System.- Chapter74. Exergy Analysis of a Hybrid System Including a Solar Panel, Fuel Cell and Absorption Chiller.- Chapter75. 3D Numerical Investigation of Ignition Timing Effects on the SI Engine exergy.- Chapter76. Exergy and Exergoeconomic Analysis and Optimization of the Cogeneration Cycle Under Solar Radiation Dynamic Model Using Genetic Algorithm.- Chapter77. Influence of Operating Parameters on the Thermal Efficiency of Complexes Combined Cycle.- Chapter78. Assessment of CO2 Measurements Based on Exergetic Approach for Low Carbon Standards in Buildings.- Chapter79. Energetic and Exergetic Performance Assessment of a Marine Engine With Measurement of CO2 Emission.- Chapter80. High-Temperature Latent Heat Storage Technology to Utilize Exergy of Solar Heat and Industrial Exhaust Heat.- Chapter81. Exergy Analysis for Energy Systems.- Chapter82. Conventional and Advanced Exergy Analysis of Post-Combustion CO2 Capture from Supercritical Coal-Fired Power Plant.- Chapter83. Exergy of Laminar Flow in Porous Medium.- Chapter84. An Exergy Analysis of a Laboratory Scale Fast Pyrolysis Process Design.- Chapter85. Greenhouse Gas Emission & Thermodynamic Assessments of an Integrated Trigeneration System Based on a SOFC Driving a GAX Absorption Refrigeration System as a Subsystem.- Chapter86. Energy and Exergy Analysis of a Novel Combined Power/Cooling Production Cycle Based on Solid Oxide Fuel Cell.- Chapter87. Combustion Analysis of Bio Fuel Derived From Waste Fish Fat.- Chapter88. Thermodynamic Performance Assessment and Comparison of Active Magnetic Regenerative and Conventional Refrigeration Systems.- Chapter89. Experimental Analysis of Biofuel and Undistilled Biofuel from Waste Fish Fat in Diesel Engine.- Chapter90. A Novel Approach to Local Level Design of Bioenergy Supply Chains Integrated with District Heating Systems.- Chapter91. Optimal Operation of MEA-Based Post-Combustion Carbon Capture Process for Natural Gas Combined Cycle Power Plants.- Chapter92. Technical and economic analysis of ionic liquid-based post-combustion CO2 capture process.- Chapter93. Process Simulation and energy consumption analysis for CO2 Capture with Different Solvents.- Chapter94. Energetic and Exergetic Performance Assessment of a Marine Engine with Measurement of CO2 Emission.- Chapter95. Some considerations regarding entropy production minimization method and optimization of thermo-mechanical systems. Power optimization versus entropy production minimization in thermomechanical systems.