Exergy for A Better Environment and Improved Sustainability 2

Ibrahim Dincer is a Professor at the Department of Automotive, Mechanical and Manufacturing Engineering Faculty of Engineering and Applied Science, at the University of Ontario Institute of Technology. He's an Editor-in-Chief of three academic journals and a board member for many more. He is the author and editor of numerous Springer titles.Aloui Fethi is a Professor at the University of Valenciennes with interests in fluid mechanics, energetics, inverse methods among others.

• Part 1: Environment impact assesment and potential solutions.- Chapter1. Wastes of Oil Drilling: Treatment Techniques and Their Effectiveness.- Chapter2. Comparative study of the adsorption of Nickel on a natural bentonite and on a Streptomyces rimosus dead biomass.- Chapter3. Process Simulation and Energy Consumption Analysis for CO2 Capture with Different Solvents.- Chapter4. Experimental Investigation of n-Butanol/Diesel Fuel Blends and n-Butanol Fumigation -Evaluation of Engine Performance, Exhaust Emissions and Heat Release.- Chapter5. Effects of temperature and biodiesel fraction on densities of commercially available diesel fuel and its blends with the highest methyl ester yield corn oil biodiesel produced by using NaOH.- Chapter6. Effects Of Temperature And Biodiesel Fraction On Dynamic Viscosities Of Commercially Available Diesel Fuels And Its Blends With The Highest Methyl Ester Yield Corn-Oil Biodisel Produced By Using Of KOH.- Chapter7. Sankey and Grassmann diagrams formineral trade in the EU-28.- Chapter8. Development of Solid Waste Management System for Adana Metropolitan Municipality.- Chapter9. Regeneration of Peel of Peas (Pisum Sativum) after Zinc Adsorption.- Chapter10. Diesel engine performance and emission study using soybean biodiesel blends with fossil diesel.- Chapter11. The Valorization of the Green Alga Spirogyra’s Biomass in the Region of Ouargla-Algeria Into Renewable Biofuel.- Chapter12. Plasma Technologies for Water Electrolyzers.- Chapter13. Determination of Metals in Water and Sediment Samples of the Sürmene River, Turkey.- Chapter14. The effect of Surfactant on Selectivity in Extraction of Aromatic Hydrocarbons From Lube Oil.- Chapter15. Biodiesel Production by Transesterification of Recycled Vegetable Oils.- Chapter16. Membrane Desalination Technology in Algeria: Reverse Osmosis for Coastal Areas.- Chapter17. A study on energy and environmental management techniques used in petroleum process industries.- Chapter18.- Generating Temperature Maps of a Solar Receiver for a Domestic Parabolic Concentrator for Cooking Purposes Under Algerian Environment.- Chapter19. Experimental Investigations on the Effects of Low Compression Ratio in a Direct Injection Diesel Engine.- Chapter20. Control of Cement Slurry Formulation for Oil Well in Critical Geological Layer.- Chapter21. Recovery of Waste Farm after Methanization by Evaporation on Inclined Plate.- Chapter 22. Optimal Operation of MEA-Based Post-Combustion Carbon Capture Process for Natural Gas Combined Cycle Power Plants.- Chapter23. Experimental and Numerical Investigations of “Fabrication of TiO2 Compact Layer by the Spray Pyrolysis Deposition System for Dye-Sensitized Solar Cells”.- Chapter24. Experimental Investigation on Citrullus Colocynthis Oil as Alternative Fuel.- Chapter25. A Novel Approach to Local Level Design of Bioenergy Supply Chains Integrated with District Heating Systems.- Chapter26. Kinetic Study of Plastic Wastes With and Without Catalysts.- Chapter27.- Effect of Ballast Water on Marine Ecosystem.- Chapter28. Regeneration of Waste Frying Oil for Biodiesel Production.- Chapter29. The Effect of Air with Supplementary Oxygen on Power and Fuel Consumption of Spark-Ignition Engine.- Chapter30. A comparative Study on Some Methods to Use Tyre Pyrolysis Oil as an Alternative Fuel in a DI Diesel Engine.- Chapter31. Investigation of Effects of Natural Gas Composition on One-Dimensional Comprehensive Engine Model Calibration.- Chapter32. Experimental Results of Split-flow Modification for Post-Combustion CO2 Capture Process.- Chapter33. Hydrogen Production from Methanol Electrolysis.- Chapter34. Experimental investigation of polypropylen pyrolysis for fuel production.- Chapter35. Experimental Analysis of Hydrogen Fuelled Homogeneous Charge Compression Ignition (HCCI) Engine.-  Part 2: Sustainable buildings.- Chapter36. Experimental Analysis of Thermal Comfort of building Integrated Phase Change Materials.- Chapter37. Determining OptimumInsulation Thickness of a Building Wall using an Environmental Impact Approach.- Chapter38. Energetic and Exergetic Design Evaluations of a Building Block Based on Hybrid Solar Envelope Method.- Chapter39. Natural Ventilation Around and Through Building: A Numerical Study.- Chapter40. Mathematical Filtering Analysis of Infrared Images in Integrated-Circuit Techniques.- Chapter41. Performance Analysis of Ceramic Composite Thermal Protection System Tiles.- Chapter42. Developing High Resolution Remote Sensing Technology Into an Advanced Knowledge Management System to Assess Small Scale Hydro-Power Potential in Kazakhstan.- Chapter43. Investigation of Thermal Characteristic of Eutectic Fatty Acid/Damar Gum as a Composite Phase Change Material (CPCM).- Chapter44. Improving of Angström-Prescott Model Using the Harmonic Analysis.- Chapter45. EEG Analysis Using Wavelet Packet Transforms on Mean Energy and Mean Teager Energy with Artificial Neuro-Fuzzy System.- Chapter46. Optical Simulation ofDifferent Cavity Receivers Shape Used in Solar Tower Power Plant.- Chapter47. Improved Wind Speed Prediction Results by Artificial Neural Network Method.- Chapter48. Technical and Economical Prefeasibility Study of a Solar Water Heating (SWH) System in an Apartment Building in Cape Town.- Chapter49. Use of straw bundles in buildings for a lower environmental footprint of insulated systems.- Part 3: Energy strategies and policies.- Chapter50. Experimental Performance Analysis of an Integrated Air-Conditioning Split Heat Pump System for Application in a Mediterranean Climate.- Chapter51. Technical and economic prefeasibility study of mini-hydro power plants in Venezuela. Case study: El Valle River.- Chapter52. A study of the Effects of External Environment and Driving Modes on Electric Automotive Air-Conditioning Load.- Chapter53. Optimization of Energy Cost Sea Water Desalinization by Reverse Osmosis: Case of Bousmail Station in Algeria.- Chapter54. Multi-Objective Optimization of Distillation Sequences Using a Genetic Based Algorithm.- Chapter55. PV Genonnected to Domestic Three Phase Electrical Network.- Chapter56. Technical and economic prefeasibility analysis of residential solar PV system in South Kazakhstan.- Chapter57. Contribution of the Cogeneration Systems to Environment and Sustainability.- Chapter58. Solar Calculations of Modified Arch (Semi-Spherical) Type Greenhouse System for Bayburt City.- Chapter59. Estimation of Global Solar Radiation in Arid Climates in Algeria.- Technical-Economic Assessment of Energy Efficiency Measures in a Mid-Size Industry.- Chapter60. Smart Simulator for Tracking the Global Maximum Power Peak of Photovoltaic Arrays Under Partial Shaded Conditions.- Chapter61. Study and Analysis on Lighting Energy Management for Highway.- Chapter62. Influence of Wind Farm on Distribution System Current Characteristics during Fault Occurrence.- Chapter63. Operating Oil Refinery Units Under Uncertainty: Thermodynamics and Economics Implications.- Chapter64. Ecological Analysis of a Wind-Diesel Hybrid Power System in the South Algeria.- Chapter65. Comparative Study of Two Integrated Solar Collectors with Symmetric and Asymmetric CPC Reflectors Based on a Ray Trace Analysis.- Chapter66. Thermoeconomic Optimization of Hydrogen Production and Liquefaction by Geothermal Power.- Chapter67. A case-study of energy modeling of a school building in Astana city (Kazakhstan).- Chapter68. Exergoeconomic and Exergoenvironmental Analysis and Optimization of the Cogeneration Cycle Under Dynamic Solar Radiation Model Using Two Renewable Sources.- Chapter69. Indicators of Sustainability Energy Management Based on Energy Audit for Hotels.- Chapter70. Using a porous environment to produce radiant heat to optimize energy consumption and reduce pollution in heating the furnaces.- Chapter71. Sn/Graphene Binary Nanocomposite Anode Electrodes for High Performance Li-Ion Battery Applications.- Chapter 72. Data-Driven Modeling for Energy Consumption Estimation.- Chapter73. A simple Model of Finite Resource Exploitation: Application to the Case of Oil.- Chapter74. Development and Application of a Simple and Reliable Power Regulator for Small-Scale Island Wind Turbine.- Chapter75. Design and Economic Analysis of Photovoltaic Systems in Different Cities of Turkey.- Chapter76. Contribution to the Control Power of a Wind System with Storage System.- Chapter77. Performance Evaluation of SWRO Desalination Plant of Skikda (Algeria).- Chapter78. Study of a PV- Electrolyzer-Fuel Cell Hybrid System.- Chapter79. Experimental and numerical investigations of a Compressed Air Energy Storage (CAES) system as a wind energy storage option.- Chapter80. Feasibility Study of a Novel One Axe Sun Tracking System with Reflector Displacement in Parabolic Trough Concentrator.- Chapter81. Crystal growth analysis of R134a clathrate with additives for cooling applications.- Chapter82. Modeling, Simulation and Optimization of an Irrerversible Solar Absorption Cooling Plant in Transient Regime.