Applied Condition Monitoring – serie
Visar alla böcker i serien Applied Condition Monitoring. Handla med fri frakt och snabb leverans.
41 produkter
41 produkter
Del 14 - Applied Condition Monitoring
Vibration-Based Condition Monitoring of Wind Turbines
Inbunden, Engelska, 2018
1 741 kr
Skickas inom 10-15 vardagar
This book describes in detail different types of vibration signals and the signal processing methods, including signal resampling and signal envelope, used for condition monitoring of drivetrains. A special emphasis is placed on wind turbines and on the fact that they work in highly varying operational conditions. The core of the book is devoted to cutting-edge methods used to validate and process vibration data in these conditions. Key case studies, where advanced signal processing methods are used to detect failures of gearboxes and bearings of wind turbines, are described and discussed in detail. Vibration sensors, SCADA (Supervisory Control and Data Acquisition), portable data analyzers and online condition monitoring systems, are also covered. This book offers a timely guide to both researchers and professionals working with wind turbines (but also other machines), and to graduate students willing to extend their knowledge in the field of vibration analysis.
Del 13 - Applied Condition Monitoring
Advances in Acoustics and Vibration II
Proceedings of the Second International Conference on Acoustics and Vibration (ICAV2018), March 19-21, 2018, Hammamet, Tunisia
Häftad, Engelska, 2018
2 174 kr
Skickas inom 10-15 vardagar
The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the Second International Conference on Acoustics and Vibration (ICAV2018), which was organized by the Tunisian Association of Industrial Acoustics and Vibration (ATAVI) and held March 19-21, in Hammamet, Tunisia. The contributions cover advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others. This book provides a valuable resource for both academics and professionals dealing with diverse issues in applied mechanics. By combining advanced theories withindustrial issues, it is expected to facilitate communication and collaboration between different groups of researchers and technology users.
Del 12 - Applied Condition Monitoring
Rotating Machinery and Signal Processing
Proceedings of the First Workshop on Signal Processing Applied to Rotating Machinery Diagnostics, SIGPROMD’2017, April 09-11, 2017, Setif, Algeria
Häftad, Engelska, 2018
1 633 kr
Skickas inom 10-15 vardagar
This book provides readers with a timely snapshot of the potential offered by and challenges posed by signal processing methods in the field of machine diagnostics and condition monitoring. It gathers contributions to the first Workshop on Signal Processing Applied to Rotating Machinery Diagnostics, held in Setif, Algeria, on April 9-10, 2017, and organized by the Applied Precision Mechanics Laboratory (LMPA) at the Institute of Precision Mechanics, University of Setif, Algeria and the Laboratory of Mechanics, Modeling and Manufacturing (LA2MP) at the National School of Engineers of Sfax. The respective chapters highlight research conducted by the two laboratories on the following main topics: noise and vibration in machines; condition monitoring in non-stationary operations; vibro-acoustic diagnosis of machinery; signal processing and pattern recognition methods; monitoring and diagnostic systems; and dynamic modeling and fault detection.
Del 15 - Applied Condition Monitoring
Advances in Condition Monitoring of Machinery in Non-Stationary Operations
Proceedings of the 6th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO’2018, 20-22 June 2018, Santander, Spain
Inbunden, Engelska, 2019
2 391 kr
Skickas inom 10-15 vardagar
This book is aimed at researchers, industry professionals and students interested in the broad ranges of disciplines related to condition monitoring of machinery working in non-stationary conditions. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO’2018, held on June 20 – 22, 2018, in Santander, Spain. The book describes both theoretical developments and a number of industrial case studies, which cover different topics, such as: noise and vibrations in machinery, conditioning monitoring in non-stationary operations, vibro-acoustic diagnosis of machinery, signal processing, application of pattern recognition and data mining, monitoring and diagnostic systems, faults detection, dynamics of structures and machinery, and mechatronic machinery diagnostics.
Del 16 - Applied Condition Monitoring
Cyclostationarity: Theory and Methods – IV
Contributions to the 10th Workshop on Cyclostationary Systems and Their Applications, February 2017, Grodek, Poland
Inbunden, Engelska, 2019
1 633 kr
Skickas inom 10-15 vardagar
This book gathers contributions presented at the 10th Workshop on Cyclostationary Systems and Their Applications, held in Gródek nad Dunajcem, Poland in February 2017. It includes twelve interesting papers covering current topics related to both cyclostationary and general non stationary processes. Moreover, this book, which covers both theoretical and practical issues, offers a practice-oriented guide to the analysis of data sets with non-stationary behavior and a bridge between basic and applied research on nonstationary processes. It provides students, researchers and professionals with a timely guide on cyclostationary systems, nonstationary processes and relevant engineering applications.
Del 16 - Applied Condition Monitoring
Cyclostationarity: Theory and Methods – IV
Contributions to the 10th Workshop on Cyclostationary Systems and Their Applications, February 2017, Grodek, Poland
Häftad, Engelska, 2020
1 633 kr
Skickas inom 10-15 vardagar
This book gathers contributions presented at the 10th Workshop on Cyclostationary Systems and Their Applications, held in Gródek nad Dunajcem, Poland in February 2017. It includes twelve interesting papers covering current topics related to both cyclostationary and general non stationary processes. Moreover, this book, which covers both theoretical and practical issues, offers a practice-oriented guide to the analysis of data sets with non-stationary behavior and a bridge between basic and applied research on nonstationary processes. It provides students, researchers and professionals with a timely guide on cyclostationary systems, nonstationary processes and relevant engineering applications.
Del 17 - Applied Condition Monitoring
Advances in Acoustics and Vibration III
Proceedings of the Third International Conference on Acoustics and Vibration (ICAV2021), March 15-16, 2021
Inbunden, Engelska, 2021
2 500 kr
Skickas inom 10-15 vardagar
The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the Third International Conference on Acoustics and Vibration (ICAV2021), which was organized by the Tunisian Association of Industrial Acoustics and Vibration (ATAVI) and held online on March 15-16, 2021, from Sfax, Tunisia. The contributions cover advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others. This book provides a valuable resource for both academics and professionals dealing with diverse issues in applied mechanics. By combining advanced theories with industrial issues, it is expected to facilitate communication and collaboration between different groups of researchers and technology users.
Del 19 - Applied Condition Monitoring
Smart Monitoring of Rotating Machinery for Industry 4.0
Inbunden, Engelska, 2021
1 633 kr
Skickas inom 10-15 vardagar
This book offers an overview of current methods for the intelligent monitoring of rotating machines. It describes the foundations of smart monitoring, guiding readers to develop appropriate machine learning and statistical models for answering important challenges, such as the management and analysis of a large volume of data. It also discusses real-world case studies, highlighting some practical issues and proposing solutions to them. The book offers extensive information on research trends, and innovative strategies to solve emerging, practical issues. It addresses both academics and professionals dealing with condition monitoring, and mechanical and production engineering issues, in the era of industry 4.0.
Del 19 - Applied Condition Monitoring
Smart Monitoring of Rotating Machinery for Industry 4.0
Häftad, Engelska, 2022
1 633 kr
Skickas inom 10-15 vardagar
This book offers an overview of current methods for the intelligent monitoring of rotating machines. It describes the foundations of smart monitoring, guiding readers to develop appropriate machine learning and statistical models for answering important challenges, such as the management and analysis of a large volume of data. It also discusses real-world case studies, highlighting some practical issues and proposing solutions to them. The book offers extensive information on research trends, and innovative strategies to solve emerging, practical issues. It addresses both academics and professionals dealing with condition monitoring, and mechanical and production engineering issues, in the era of industry 4.0.
Del 18 - Applied Condition Monitoring
Nonstationary Systems: Theory and Applications
Contributions to the 13th Workshop on Nonstationary Systems and Their Applications, February 3-5, 2020, Grodek nad Dunajcem, Poland
Häftad, Engelska, 2022
1 633 kr
Skickas inom 10-15 vardagar
This book offers an overview of current and recent methods for the analysis of the nonstationary processes, focusing on cyclostationary systems that are ubiquitous in various application fields. Based on the 13th Workshop on Nonstationary Systems and Their Applications, held on February 3-5, 2020, in Grodek nad Dunajcem, Poland, the book merges theoretical contributions describing new statistical and intelligent methods for analyzing nonstationary processes, and applied works showing how the proposed methods can be implemented in practice and do perform in real-world case studies. A significant part of the book is dedicated to nonstationary systems applications, with a special emphasis on those in condition monitoring.
Del 18 - Applied Condition Monitoring
Nonstationary Systems: Theory and Applications
Contributions to the 13th Workshop on Nonstationary Systems and Their Applications, February 3-5, 2020, Grodek nad Dunajcem, Poland
Inbunden, Engelska, 2021
1 633 kr
Skickas inom 10-15 vardagar
This book offers an overview of current and recent methods for the analysis of the nonstationary processes, focusing on cyclostationary systems that are ubiquitous in various application fields. Based on the 13th Workshop on Nonstationary Systems and Their Applications, held on February 3-5, 2020, in Grodek nad Dunajcem, Poland, the book merges theoretical contributions describing new statistical and intelligent methods for analyzing nonstationary processes, and applied works showing how the proposed methods can be implemented in practice and do perform in real-world case studies. A significant part of the book is dedicated to nonstationary systems applications, with a special emphasis on those in condition monitoring.
Del 20 - Applied Condition Monitoring
Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency
Contributions to the First International Workshop on Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency, MOSCOSSEE’2021, February 25-26, 2021
Inbunden, Engelska, 2021
1 958 kr
Skickas inom 10-15 vardagar
This book provides readers with an overview of recent theories and methods for studying complex mechanical systems used in energy production, such as wind turbines, but not limited to them. The emphasis is put on strategies for increasing energy efficiency, and on recent industrial applications. Topics cover dynamics and vibration, vibroacoustics, engineering design, modelling and simulation, fault diagnostics, signal processing and prognostics. The book is based on peer-review contributions and invited talks presented at the first International Workshop on MOdelling and Simulation of COmplex Systems for Sustainable Energy Efficiency, MOSCOSSEE 2021, held online on February 25-26, 2021, and organized by the LAboratory of Mechanics, Modelling and Production (LA2MP) from University of Sfax, Tunisia and the Department of Mechanical and Aeronautical engineering, Centre of Asset Integrity Management (C-AIM) from University of Pretoria, South Africa. By offering authoritative information on innovative methods and tools for application in renewable energy production, it provides a valuable resource to both academics and professionals, and a bridge to facilitate communication between the two groups.
Del 20 - Applied Condition Monitoring
Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency
Contributions to the First International Workshop on Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency, MOSCOSSEE’2021, February 25-26, 2021
Häftad, Engelska, 2022
1 958 kr
Skickas inom 10-15 vardagar
This book provides readers with an overview of recent theories and methods for studying complex mechanical systems used in energy production, such as wind turbines, but not limited to them. The emphasis is put on strategies for increasing energy efficiency, and on recent industrial applications. Topics cover dynamics and vibration, vibroacoustics, engineering design, modelling and simulation, fault diagnostics, signal processing and prognostics. The book is based on peer-review contributions and invited talks presented at the first International Workshop on MOdelling and Simulation of COmplex Systems for Sustainable Energy Efficiency, MOSCOSSEE 2021, held online on February 25-26, 2021, and organized by the LAboratory of Mechanics, Modelling and Production (LA2MP) from University of Sfax, Tunisia and the Department of Mechanical and Aeronautical engineering, Centre of Asset Integrity Management (C-AIM) from University of Pretoria, South Africa. By offering authoritative information on innovative methods and tools for application in renewable energy production, it provides a valuable resource to both academics and professionals, and a bridge to facilitate communication between the two groups.
Del 21 - Applied Condition Monitoring
Advances in Technical Diagnostics II
Proceedings of the 7th International Congress on Technical Diagnostics, ICTD 2022, 14–16 September 2022, Radom, Poland
Inbunden, Engelska, 2023
2 391 kr
Skickas inom 10-15 vardagar
This book reports on recent theories and methods for diagnostics and condition monitoring of machines, materials and industrial processes, with a special emphasis on the application of artificial intelligence and intelligent control systems. Gathering original contributions to the 7th International Congress on Technical Diagnostics, ICTD2022, held on September 14–16, 2022, in Radom, Poland, this book offers extensive information on the latest trends in machine diagnostics and on IoT, smart sensors and machine learning technology in advanced condition monitoring. It addresses both scientists and professionals and is intended to foster communication and collaborations between the two groups.
Del 21 - Applied Condition Monitoring
Advances in Technical Diagnostics II
Proceedings of the 7th International Congress on Technical Diagnostics, ICTD 2022, 14–16 September 2022, Radom, Poland
Häftad, Engelska, 2024
2 391 kr
Skickas inom 10-15 vardagar
This book reports on recent theories and methods for diagnostics and condition monitoring of machines, materials and industrial processes, with a special emphasis on the application of artificial intelligence and intelligent control systems. Gathering original contributions to the 7th International Congress on Technical Diagnostics, ICTD2022, held on September 14–16, 2022, in Radom, Poland, this book offers extensive information on the latest trends in machine diagnostics and on IoT, smart sensors and machine learning technology in advanced condition monitoring. It addresses both scientists and professionals and is intended to foster communication and collaborations between the two groups.
Del 22 - Applied Condition Monitoring
Advances in Acoustics and Vibration IV
Proceedings of the Fourth International Conference on Acoustics and Vibration (ICAV2022), December 19-21, 2022, Sousse, Tunisia
Inbunden, Engelska, 2023
2 391 kr
Skickas inom 10-15 vardagar
The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the Fourth International Conference on Acoustics and Vibration (ICAV2022), which was organized by the Tunisian Association of Industrial Acoustics and Vibration (ATAVI) and held in hybrid format on December 19–21, 2022, in and from Sousse, Tunisia. The contributions cover advances in both theory and practice in a variety of subfields, such as structural and machine dynamics and vibrations, fault diagnosis and prognosis, nonlinear dynamics, and vibration control of mechatronic systems. Further topics include fluid–structure interaction, computational vibro-acoustics, vibration field measurements, and dynamic behavior of materials. This book provides a valuable resource for both academics and professionals dealing with diverse issues in applied mechanics. By combining advanced theories with industrial issues, it is expected to facilitate communication and collaboration between different groups of researchers and technology users.
Del 22 - Applied Condition Monitoring
Advances in Acoustics and Vibration IV
Proceedings of the Fourth International Conference on Acoustics and Vibration (ICAV2022), December 19-21, 2022, Sousse, Tunisia
Häftad, Engelska, 2024
2 391 kr
Skickas inom 10-15 vardagar
The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the Fourth International Conference on Acoustics and Vibration (ICAV2022), which was organized by the Tunisian Association of Industrial Acoustics and Vibration (ATAVI) and held in hybrid format on December 19–21, 2022, in and from Sousse, Tunisia. The contributions cover advances in both theory and practice in a variety of subfields, such as structural and machine dynamics and vibrations, fault diagnosis and prognosis, nonlinear dynamics, and vibration control of mechatronic systems. Further topics include fluid–structure interaction, computational vibro-acoustics, vibration field measurements, and dynamic behavior of materials. This book provides a valuable resource for both academics and professionals dealing with diverse issues in applied mechanics. By combining advanced theories with industrial issues, it is expected to facilitate communication and collaboration between different groups of researchers and technology users.
Del 23 - Applied Condition Monitoring
Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency II
Selected Contributions to the 2nd International Workshop on Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency, MOSCOSSEE’2024, November 2–3, 2024, Matmata, Gabes, Tunisia
Inbunden, Engelska, 2025
1 849 kr
Skickas inom 10-15 vardagar
This book provides readers with an overview of recent theories and methods for studying complex mechanical systems used in energy production. The emphasis is put on strategies for increasing energy efficiency, and on recent industrial applications. Topics cover: design, modeling and control of hybrid energy systems, dynamic behaviour of composites, structural vibration, multiphysics dynamic systems, fault diagnosis and robust design. Based on peer-review contributions and invited talks presented at the second International Workshop on MOdelling and Simulation of COmplex Systems for Sustainable Energy Efficiency, MOSCOSSEE 2024, held on November 2-3, 2024, in Matmata, Gabes, Tunisia, this book offers timely information on methods and tools for application in renewable energy production. It provides a valuable resource to both academics and professionals, and a bridge to facilitate communication between the two groups. The conference was organised by The LAboratory of Mechanics, Modelling and Production (LA2MP) at the National School of Engineers of Sfax from University of Sfax, Tunisia, the department of Mechanical Engineering at the National School of Engineers of Gabes from the University of Gabes and the Applied Research Unit for Renewable Energy, Water and the Environment from University of Nouakchott, Mauritania.
Del 1 - Applied Condition Monitoring
Stochastic Modeling of Thermal Fatigue Crack Growth
Inbunden, Engelska, 2014
1 091 kr
Skickas inom 10-15 vardagar
The book describes a systematic stochastic modeling approach for assessing thermal-fatigue crack-growth in mixing tees, based on the power spectral density of temperature fluctuation at the inner pipe surface. It shows the development of a frequency-temperature response function in the framework of single-input, single-output (SISO) methodology from random noise/signal theory under sinusoidal input. The frequency response of stress intensity factor (SIF) is obtained by a polynomial fitting procedure of thermal stress profiles at various instants of time. The method, which takes into account the variability of material properties, and has been implemented in a real-world application, estimates the probabilities of failure by considering a limit state function and Monte Carlo analysis, which are based on the proposed stochastic model. Written in a comprehensive and accessible style, this book presents a new and effective method for assessing thermal fatigue crack, and it is intended as a concise and practice-oriented guide for all undergraduate students, young scientists and researchers dealing with probabilistic assessment of structural integrity.
Del 2 - Applied Condition Monitoring
Multiphysics Modelling and Simulation for Systems Design and Monitoring
Proceedings of the Multiphysics Modelling and Simulation for Systems Design Conference, MMSSD 2014, 17-19 December, Sousse, Tunisia
Inbunden, Engelska, 2015
2 174 kr
Skickas inom 10-15 vardagar
This book reports on the state of the art in the field of multiphysics systems. It consists of accurately reviewed contributions to the MMSSD’2014 conference, which was held from December 17 to 19, 2004 in Hammamet, Tunisia. The different chapters, covering new theories, methods and a number of case studies, provide readers with an up-to-date picture of multiphysics modeling and simulation. They highlight the role played by high-performance computing and newly available software in promoting the study of multiphysics coupling effects, and show how these technologies can be practically implemented to bring about significant improvements in the field of design, control and monitoring of machines. In addition to providing a detailed description of the methods and their applications, the book also identifies new research issues, challenges and opportunities, thus providing researchers and practitioners with both technical information to support their daily work and a new source of inspiration for their future research.
Del 3 - Applied Condition Monitoring
Cyclostationarity: Theory and Methods - II
Contributions to the 7th Workshop on Cyclostationary Systems And Their Applications, Grodek, Poland, 2014
Inbunden, Engelska, 2015
1 633 kr
Skickas inom 10-15 vardagar
This book reports on the latest advances in the analysis of non-stationary signals, with special emphasis on cyclostationary systems. It includes cutting-edge contributions presented at the 7th Workshop on “Cyclostationary Systems and Their Applications,” which was held in Gródek nad Dunajcem, Poland, in February 2014. The book covers both the theoretical properties of cyclostationary models and processes, including estimation problems for systems exhibiting cyclostationary properties, and several applications of cyclostationary systems, including case studies on gears and bearings, and methods for implementing cyclostationary processes for damage assessment in condition-based maintenance operations. It addresses the needs of students, researchers and professionals in the broad fields of engineering, mathematics and physics, with a special focus on those studying or working with nonstationary and/or cyclostationary processes.
Del 4 - Applied Condition Monitoring
Advances in Condition Monitoring of Machinery in Non-Stationary Operations
Proceedings of the Fourth International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO'2014, Lyon, France December 15-17
Inbunden, Engelska, 2015
2 174 kr
Skickas inom 10-15 vardagar
The book provides readers with a snapshot of recent research and technological trends in the field of condition monitoring of machinery working under a broad range of operating conditions. Each chapter, accepted after a rigorous peer-review process, reports on an original piece of work presented and discussed at the 4th International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO 2014, held on December 15-16, 2014, in Lyon, France. The contributions have been grouped into three different sections according to the main subfield (signal processing, data mining or condition monitoring techniques) they are related to. The book includes both theoretical developments as well as a number of industrial case studies, in different areas including, but not limited to: noise and vibration; vibro-acoustic diagnosis; signal processing techniques; diagnostic data analysis; instantaneous speed identification; monitoring and diagnostic systems; and dynamic and fault modeling. This book not only provides a valuable resource for both academics and professionals in the field of condition monitoring, it also aims at facilitating communication and collaboration between the two groups.
Del 3 - Applied Condition Monitoring
Cyclostationarity: Theory and Methods - II
Contributions to the 7th Workshop on Cyclostationary Systems And Their Applications, Grodek, Poland, 2014
Häftad, Engelska, 2016
1 633 kr
Skickas inom 10-15 vardagar
This book reports on the latest advances in the analysis of non-stationary signals, with special emphasis on cyclostationary systems. It includes cutting-edge contributions presented at the 7th Workshop on “Cyclostationary Systems and Their Applications,” which was held in Gródek nad Dunajcem, Poland, in February 2014. The book covers both the theoretical properties of cyclostationary models and processes, including estimation problems for systems exhibiting cyclostationary properties, and several applications of cyclostationary systems, including case studies on gears and bearings, and methods for implementing cyclostationary processes for damage assessment in condition-based maintenance operations. It addresses the needs of students, researchers and professionals in the broad fields of engineering, mathematics and physics, with a special focus on those studying or working with nonstationary and/or cyclostationary processes.
2 763 kr
Skickas inom 5-8 vardagar
The book provides readers with a snapshot of recent research and technological trends in the field of condition monitoring of machinery working under a broad range of operating conditions. Each chapter, accepted after a rigorous peer-review process, reports on an original piece of work presented and discussed at the 4th International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO 2014, held on December 15-16, 2014, in Lyon, France. The contributions have been grouped into three different sections according to the main subfield (signal processing, data mining or condition monitoring techniques) they are related to. The book includes both theoretical developments as well as a number of industrial case studies, in different areas including, but not limited to: noise and vibration; vibro-acoustic diagnosis; signal processing techniques; diagnostic data analysis; instantaneous speed identification; monitoring and diagnostic systems; and dynamic and fault modeling. This book not only provides a valuable resource for both academics and professionals in the field of condition monitoring, it also aims at facilitating communication and collaboration between the two groups.
Del 2 - Applied Condition Monitoring
Multiphysics Modelling and Simulation for Systems Design and Monitoring
Proceedings of the Multiphysics Modelling and Simulation for Systems Design Conference, MMSSD 2014, 17-19 December, Sousse, Tunisia
Häftad, Engelska, 2016
2 174 kr
Skickas inom 10-15 vardagar
This book reports on the state of the art in the field of multiphysics systems. It consists of accurately reviewed contributions to the MMSSD’2014 conference, which was held from December 17 to 19, 2004 in Hammamet, Tunisia. The different chapters, covering new theories, methods and a number of case studies, provide readers with an up-to-date picture of multiphysics modeling and simulation. They highlight the role played by high-performance computing and newly available software in promoting the study of multiphysics coupling effects, and show how these technologies can be practically implemented to bring about significant improvements in the field of design, control and monitoring of machines. In addition to providing a detailed description of the methods and their applications, the book also identifies new research issues, challenges and opportunities, thus providing researchers and practitioners with both technical information to support their daily work and a new source of inspiration for their future research.
Del 1 - Applied Condition Monitoring
Stochastic Modeling of Thermal Fatigue Crack Growth
Häftad, Engelska, 2016
1 091 kr
Skickas inom 10-15 vardagar
The book describes a systematic stochastic modeling approach for assessing thermal-fatigue crack-growth in mixing tees, based on the power spectral density of temperature fluctuation at the inner pipe surface. It shows the development of a frequency-temperature response function in the framework of single-input, single-output (SISO) methodology from random noise/signal theory under sinusoidal input. The frequency response of stress intensity factor (SIF) is obtained by a polynomial fitting procedure of thermal stress profiles at various instants of time. The method, which takes into account the variability of material properties, and has been implemented in a real-world application, estimates the probabilities of failure by considering a limit state function and Monte Carlo analysis, which are based on the proposed stochastic model. Written in a comprehensive and accessible style, this book presents a new and effective method for assessing thermal fatigue crack, and it is intended as a concise and practice-oriented guide for all undergraduate students, young scientists and researchers dealing with probabilistic assessment of structural integrity.
Del 5 - Applied Condition Monitoring
Advances in Acoustics and Vibration
Proceedings of the International Conference on Acoustics and Vibration (ICAV2016), March 21-23, Hammamet, Tunisia
Inbunden, Engelska, 2016
2 174 kr
Skickas inom 10-15 vardagar
The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at International Conference on Acoustics and Vibration (ICAV2016), which was organized by the Tunisian Association of Industrial Acoustics and Vibration (ATAVI) and held March 21-23, in Hammamet, Tunisia. The contributions, mainly written by north African authors, covers advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others.This book provides a valuable resource for both academics and professionals dealing with diverse issues in applied mechanics. By combining advanced theories with industrial issues, it is expected to facilitate communication and collaboration between different groups of researchers and technology users.
Del 6 - Applied Condition Monitoring
Cyclostationarity: Theory and Methods III
Contributions to the 9th Workshop on Cyclostationary Systems and Their Applications, Grodek, Poland, 2016
Inbunden, Engelska, 2017
1 633 kr
Skickas inom 10-15 vardagar
This book gathers contributions presented at the 9th Workshop on Cyclostationary Systems and Their Applications, held in Gródek nad Dunajcem, Poland in February 2016. It includes both theory-oriented and practice-oriented chapters. The former focus on heavy-tailed time series and processes, PAR models, rational spectra for PARMA processes, covariance invariant analysis, change point problems, and subsampling for time series, as well as the fraction-of-time approach, GARMA models and weak dependence. In turn, the latter report on case studies of various mechanical systems, and on stochastic and statistical methods, especially in the context of damage detection. The book provides students, researchers and professionals with a timely guide to cyclostationary systems, nonstationary processes and relevant engineering applications.
Del 7 - Applied Condition Monitoring
Modeling and Monitoring of Pipelines and Networks
Advanced Tools for Automatic Monitoring and Supervision of Pipelines
Inbunden, Engelska, 2017
1 524 kr
Skickas inom 10-15 vardagar
This book focuses on the analysis and design of advanced techniques for on-line automatic computational monitoring of pipelines and pipe networks. It discusses how to improve the systems’ security considering mathematical models of the flow, historical flow rate and pressure data, with the main goal of reducing the number of sensors installed along a pipeline. The techniques presented in the book have been implemented in digital systems to enhance the abilities of the pipeline network’s operators in recognizing anomalies. A real leak scenario in a Mexican water pipeline is used to illustrate the benefits of these techniques in locating the position of a leak. Intended for an interdisciplinary audience, the book addresses researchers and professionals in the areas of mechanical, civil and control engineering. It covers topics on fluid mechanics, instrumentation, automatic control, signal processing, computing, construction and diagnostic technologies.
Del 8 - Applied Condition Monitoring
On-line Condition Monitoring in Industrial Lubrication and Tribology
Inbunden, Engelska, 2017
1 524 kr
Skickas inom 10-15 vardagar
This book offers readers a concise yet comprehensive introduction to a set of diagnostic methods for on-line condition monitoring of lubricated tribosystems used in industry. It covers the latest trends in on-line tribodiagnostics, an important and rapidly developing area of tribology. The book also reports on new tools as they have been developed and applied by the authors. A special emphasis is given to the physical fundamentals of opto-magnetic detectors, ferro-analyzers and analyzers of metal particles in lubricated tribosystems, as well as fluorescence methods for real-time oil monitoring in compressors, hydraulic systems and electrical transformers. Further, the book discusses other important issues such as the monitoring of water content in oil, and presents techniques for measuring soot content in oil in diesel engine oils. Lastly, it describes the modular intelligent (SMART) diagnostic system for vehicles. Mainly intended for researchers, industrial and automotive engineers developing cost-effective techniques and sensors for the on-line monitoring of lubricating oil, the book also offers a valuable source of information for students and project managers in the manufacturing, energy, oil and gas, and automotive industry.