IFAC Symposia Series – serie

Visar alla böcker i serien IFAC Symposia Series. Handla med fri frakt och snabb leverans.

21 produkter

Kategorier

21 produkter

Del 13 - IFAC Symposia Series
Information Control Problems in Manufacturing Technology 1989
Selected papers from the 6th IFAC/IFIP/IFORS/IMACS Symposium, Madrid, Spain, 26-29 September 1989
AvE.A. Puente,L. Nemes
Inbunden, Engelska, 1990
703 kr
Skickas inom 10-15 vardagar
The Symposium presented and discussed the latest research on new theories and advanced applications of automatic systems, which are developed for manufacturing technology or are applicable to advanced manufacturing systems. The topics included computer integrated manufacturing, simulation and the increasingly important areas of artificial intelligence and expert systems, and applied them to the broad spectrum of problems that the modern manufacturing engineer is likely to encounter in the design and application of increasingly complex automatic systems.
Del 7 - IFAC Symposia Series
Intelligent Tuning and Adaptive Control
Selected Papers from the IFAC Symposium, Singapore, 15-17 January 1991
AvR. Devanathan
Inbunden, Engelska, 1991
703 kr
Skickas inom 10-15 vardagar
This volume contains 67 papers reporting on the state-of-the-art research in the fields of adaptive control and intelligent tuning. Papers include applications in robotics, the processing industries and machine control.
Del 8 - IFAC Symposia Series
Safety of Computer Control Systems 1991
Safety, Security and Reliability of Computer Based Systems
AvJ.F. Lindeberg
Inbunden, Engelska, 1991
679 kr
Skickas inom 10-15 vardagar
Containing 29 papers, this volume contributes to the literature published on the safety of computer systems. The papers cover all aspects - specification, development, analysis, verification, validation of hardware and software, as well as the problems involved in the reliability, availability and security of systems.
Del 13 - IFAC Symposia Series
Low Cost Automation 1992
Techniques, Components and Instruments, Applications
AvP. Albertos,Peter Kopacek
Inbunden, Engelska, 1993
703 kr
Skickas inom 10-15 vardagar
The main aim of this symposium was to bring together end-users and control system specialists to evaluate the possibilities for improvement of techniques, design procedures, components and instruments to encourage low cost automation; considering not only economic aspects but also improvements in productivity, reliability, flexibility and ease-of-application. Special emphasis was placed on small and medium sized enterprises. The technical sessions dealt with topics from process automation as well as from manufacturing automation.
Intelligent Components and Instruments for Control Applications 1992
AvE. F. Camacho,A. Ollero
Inbunden, Engelska, 1993
703 kr
Skickas inom 10-15 vardagar
Intelligent control is an emergent field involving the development of new control techniques, such as reasoning, learning and perception, and has a great impact on a number of applications including robotics and process control. The symposium brought together control systems specialists, equipment manufacturers, and end-users, to evaluate techniques, components, and instruments for intelligent control. The selected papers in this volume cover intelligent control techniques, actuators, sensors, image processing, computer vision, software and communications. Papers relating to applications, such as robotics, power and process control, manufacturing, aerospace and traffic control are also included.
Analysis, Design and Evaluation of Man-Machine Systems 1992
Selected Papers from the Fifth IFAC/IFIP/IFORS/IEA Symposium, The Hague, Netherlands, 9 - 11 June 1992
AvH.G. Stassen
Inbunden, Engelska, 1993
701 kr
Skickas inom 10-15 vardagar
Containing 4 plenary papers and 38 technical papers, this volume contributes to the literature on the important subject of man-machine systems. The many topics discussed include human performance skills, knowledge engineering and expert systems, training procedures, human performance and mental load models, and human-machine interfaces.
Historic Control Textbooks
AvJanos Gertler
Inbunden, Engelska, 2006
692 kr
Skickas inom 10-15 vardagar
This collection is to present the earliest textbooks that grew out of the original development of automatic control, and the many others that followed very soon, in various countries, and in various languages. We set out to collect information on one to four books from each country, including a brief description of the background, history and contents of the book, a picture of the front page, and copies of one to a few "typical" pages. With the latter, we intended to show pages that contain an equation or figure, easily recognizable to anyone familiar with control, embedded in the text written in one of the many languages and, in some cases, in various scripts. The present collection contains 62 entries from 21 countries.
Adaptive Systems in Control and Signal Processing 1989
AvT.S. Durrani,D.H. Owensm. fl.
Inbunden, Engelska, 1990
412 kr
Tillfälligt slut
The Symposium covered three major areas: adaptive control, identification and signal processing. In all three, new developments were discussed covering both theoretical and applications research. Within the subject area of adaptive control the discussion centred around the challenges of robust control design to unmodelled dynamics, robust parameter estimation and enhanced performance from the estimator, while the papers on identification took the theme of it being a bridge between adaptive control and signal processing. The final area looked at two aspects of signal processing: recursive estimation and adaptive filters.
Large Scale Systems: Theory and Applications 1989
AvK. Reinisch,M. Thoma
Inbunden, Engelska, 1990
412 kr
Tillfälligt slut
The papers present new trends on the development of theory and applications in the field of large scale systems analysis, planning and control. The issues discussed are proving to be of great importance as systems of growing complexity are found in all fields of human activities, often developed by economic, organizational and technological effects. The papers are divided into three main areas of interest; Modelling, Analysis, Basic Controls; Superordinate Controls and Decisions; Applications.
Del 14 - IFAC Symposia Series
Energy Systems, Management and Economics
AvK. Yamaji,Y. Kayam. fl.
Inbunden, Engelska, 1990
378 kr
Tillfälligt slut
As the difficulties increase for the production of energy by safe, economic and environmental means, the necessity for systems to deal with these problems becomes essential. The symposium presented and discussed the state of the art in the development of the required energy systems, with special emphasis on their management and economic implications. The papers taken from the meeting cover areas including power generation, energy and environment, renewable energy, power system operation, and electricity supply and demand.
Advanced Information Processing in Automatic Control (AIPAC'89)
AvR. Husson
Inbunden, Engelska, 1990
412 kr
Tillfälligt slut
Information Processing is a key area of research and development and the symposium presented state-of-the-art reports on some of the areas which are of relevance in automatic control: fault diagnosis and system reliability. Papers also covered the role of expert systems and other knowledge based systems, which are needed, to cope with the vast quantities of data generated by large scale systems. This volume should be considered essential reading for anyone involved in this rapidly developing area.
Dynamics and Control of Chemical Reactors, Distillation Columns and Batch Processes (DYCORD+'89)
AvJ.F. Macgregor,B.D. Tyreusm. fl.
Inbunden, Engelska, 1990
378 kr
Tillfälligt slut
This volume represents important developments in the control, modelling and dynamics of the three main areas of chemical engineering: chemical reactors, distillation columns and batch processes. All three topics are covered by a plenary survey paper, reflecting the diversity of information available and its relevance to process designers, who need to keep up to date with opportunities and limitations of modern process control, and control scientists who need to obtain realistic cases for research in methods and techniques.
Automatic Control 1990
AvBozzano G Luisa
Inbunden, Engelska, 1991
2 159 kr
Tillfälligt slut
These 6 volumes provide a general overview on the state-of-the-art and future developments in automation and control. The application of systems and control in all areas are covered, from the social and cultural effects of control, to control in mineral and metal processing. This set will be an invaluable source of information to all those interested in the areas of automation and control.
Automatic Control 1990
AvBozzano G Luisa
Inbunden, Engelska, 1991
429 kr
Tillfälligt slut
This volume provides a general overview on the state-of-the-art and future developments in automation and control. The application of systems and control in all areas is covered, from the social and cultural effects of control, to control in mineral and metal processing. This volume will be an invaluable source of information to all those interested in the areas of automation and control.
Automatic Control 1990
AvBozzano G Luisa
Inbunden, Engelska, 1991
429 kr
Tillfälligt slut
This volume provides a general overview on the state-of-the-art and future developments in automation and control. The application of systems and control in all areas is covered, from the social and cultural effects of control, to control in mineral and metal processing. This volume will be an invaluable source of information to all those interested in the areas of automation and control.
Automatic Control 1990
AvBozzano G Luisa
Inbunden, Engelska, 1991
429 kr
Tillfälligt slut
This volume provides a general overview on the state-of-the-art and future developments in automation and control. The application of systems and control in all areas is covered, from the social and cultural effects of control, to control in mineral and metal processing. This volume will be an invaluable source of information to all those interested in the areas of automation and control.
Automatic Control 1990
Av� Jaaksoo
Inbunden, Engelska, 1991
429 kr
Tillfälligt slut
This volume provides a general overview on the state-of-the-art and future developments in automation and control. The application of systems and control in all areas is covered, from the social and cultural effects of control, to control in mineral and metal processing. This volume will be an invaluable source of information to all those interested in the areas of automation and control.
Automatic Control 1990
AvBozzano G Luisa
Inbunden, Engelska, 1991
429 kr
Tillfälligt slut
This volume provides a general overview on the state-of-the-art and future developments in automation and control. The application of systems and control in all areas is covered, from the social and cultural effects of control, to control in mineral and metal processing. This volume will be an invaluable source of information to all those interested in any aspect of automation and control.
Distributed Intelligence Systems 1991
AvA. H. Levis,H. E. Stephanou
Inbunden, Engelska, 1992
378 kr
Tillfälligt slut
Containing 41 papers, this volume focuses on recent advances in the field of intelligent systems.
Control of Power Plants and Power Systems 1992
AvG.K. Lausterer,H. Weberm. fl.
Inbunden, Engelska, 1993
378 kr
Tillfälligt slut
The aim of this symposium is to bring together control engineers and scientists in power plant and power system design. Problems concerning the modelling and the control of single power plant units as well as problems concerning the long-, mid- and short-term dynamics and the control of power systems in detail were treated.
Information Control Problems in Manufacturing Technology 1992
Selected Papers from the 7th IFAC/IFIP/IFORS/IMACS/ISPE Symposium, Toronto, Ontario, Canada, 25 - 28 May 1992
AvM.B. Zaremba
Inbunden, Engelska, 1993
412 kr
Tillfälligt slut
These proceedings contain more than 80 of the best papers presented at the INCOM '92 Symposium, and relate to the vast changes which are occurring worldwide in manufacturing technology. Research oriented technical papers cover subjects such as: simulation of manufacturing processes; sensor based robots; information systems; general aspects of CIM and manufacturing networks.

Företag, bibliotek eller offentlig verksamhet?

IFAC Symposia Series – serie

Information Control Problems in Manufacturing Technology 1989

Intelligent Tuning and Adaptive Control

Safety of Computer Control Systems 1991

Low Cost Automation 1992

Intelligent Components and Instruments for Control Applications 1992

Analysis, Design and Evaluation of Man-Machine Systems 1992

Historic Control Textbooks

Adaptive Systems in Control and Signal Processing 1989

Large Scale Systems: Theory and Applications 1989

Energy Systems, Management and Economics

Advanced Information Processing in Automatic Control (AIPAC'89)

Dynamics and Control of Chemical Reactors, Distillation Columns and Batch Processes (DYCORD+'89)

Automatic Control 1990

Automatic Control 1990

Automatic Control 1990

Automatic Control 1990

Automatic Control 1990

Automatic Control 1990

Distributed Intelligence Systems 1991

Control of Power Plants and Power Systems 1992

Information Control Problems in Manufacturing Technology 1992

Mina sidor

Mina sidor

Hjälp

Hjälp

Om Bokus

Om Bokus

Populärt

Populärt

Inspiration

Inspiration