Modern Antenna – serie

This book investigates in detail some new spoof surface plasmon polaritons (SSPPs) structures and their applications to antenna. It introduces the working principle and radiation characteristics of directional antenna, omnidirectional antenna, reconfigurable antenna and phase-mode antenna based on SSPPs structure. Especially, the irregular SSPPs structure, such as T-shaped and m-shaped SSPPs structures, is introduced to low-profile end-fire antenna with vertical polarization; the rotated SSPPs structure is applied to CP end-fire antenna and omnidirectional antenna; PIN circuit combining with SSPPs structure is used to pattern reconfigurable antenna; the novel phase-mode SSPPs antennas with multi-modes are performed too.This book proposes a continuous method to develop the potentialities of the SSPPs antenna. And the readers can study the method or ideas of the SSPPs antenna, even graft the methods to other SSPPs antenna.The book is intended for undergraduate and graduate students who are interested in SSPPs antenna technology, researchers investigating high-performance antenna, and antenna design engineers working on multi-function antenna applications.

This book investigates in detail some new spoof surface plasmon polaritons (SSPPs) structures and their applications to antenna. It introduces the working principle and radiation characteristics of directional antenna, omnidirectional antenna, reconfigurable antenna and phase-mode antenna based on SSPPs structure. Especially, the irregular SSPPs structure, such as T-shaped and m-shaped SSPPs structures, is introduced to low-profile end-fire antenna with vertical polarization; the rotated SSPPs structure is applied to CP end-fire antenna and omnidirectional antenna; PIN circuit combining with SSPPs structure is used to pattern reconfigurable antenna; the novel phase-mode SSPPs antennas with multi-modes are performed too.This book proposes a continuous method to develop the potentialities of the SSPPs antenna. And the readers can study the method or ideas of the SSPPs antenna, even graft the methods to other SSPPs antenna.The book is intended for undergraduate and graduate students who are interested in SSPPs antenna technology, researchers investigating high-performance antenna, and antenna design engineers working on multi-function antenna applications.

This book investigates in detail the antenna optimization method with binary coding and their applications to antenna design. It introduces the binary coding principle and optimization method, the method of binary coding corresponding to geometry structure. In further, the designs by binary coding optimization method of following items are introduced, including multi-frequency antenna based on binary coding, low profile RFID tag antenna on metal, wideband directional antenna with low profile, mmWave antenna and UWB antenna. Additionally, improved hexagon unit to antenna optimization by binary coding method is given, and a new method of antenna design based on optimization of linear motion trajectory is presented in the end.This book proposes an automatic optimization method of meshed antenna based on binary coding, reduce the artificial a priori influence and find the best antenna. The book is intended for undergraduate and graduate students who are interested in antenna technology, researchers investigating high performance antenna, and antenna design engineers working on new antenna and the applications.

This book investigates in detail the antenna optimization method with binary coding and their applications to antenna design. It introduces the binary coding principle and optimization method, the method of binary coding corresponding to geometry structure. In further, the designs by binary coding optimization method of following items are introduced, including multi-frequency antenna based on binary coding, low profile RFID tag antenna on metal, wideband directional antenna with low profile, mmWave antenna and UWB antenna. Additionally, improved hexagon unit to antenna optimization by binary coding method is given, and a new method of antenna design based on optimization of linear motion trajectory is presented in the end.This book proposes an automatic optimization method of meshed antenna based on binary coding, reduce the artificial a priori influence and find the best antenna. The book is intended for undergraduate and graduate students who are interested in antenna technology, researchers investigating high performance antenna, and antenna design engineers working on new antenna and the applications.

This book investigates in detail the generalized principle of the pattern multiplication (GPPM) and its application to new phased array with high performances. It introduces the generalized element factor (GEF) to small aperture with multi-modes. Based on the GEF, the GPPM can be used to construct the wide-angle scanning array with the dual-port phase mode antenna. Further, a dual-port phase mode SSPPs antenna is proposed to scan in 3D free space. It is extended to two kinds of 1D arrays with 4 elements; both of them perform good 3D scanning with high gain and large range, which will improve future radar design and wireless communication. This book proposes a new method to develop the potentialities of the GPPM and the new phase array. And the readers can study the method or ideas of the GEF, GPPM, even graft the methods to new phase mode antenna and array. It is intended for undergraduate and graduate students who are interested in new phase mode antenna and array technology, researchers investigating high-performance antenna, and antenna design engineers working on phase array applications.

This book investigates in detail the generalized principle of the pattern multiplication (GPPM) and its application to new phased array with high performances. It introduces the generalized element factor (GEF) to small aperture with multi-modes. Based on the GEF, the GPPM can be used to construct the wide-angle scanning array with the dual-port phase mode antenna. Further, a dual-port phase mode SSPPs antenna is proposed to scan in 3D free space. It is extended to two kinds of 1D arrays with 4 elements; both of them perform good 3D scanning with high gain and large range, which will improve future radar design and wireless communication. This book proposes a new method to develop the potentialities of the GPPM and the new phase array. And the readers can study the method or ideas of the GEF, GPPM, even graft the methods to new phase mode antenna and array. It is intended for undergraduate and graduate students who are interested in new phase mode antenna and array technology, researchers investigating high-performance antenna, and antenna design engineers working on phase array applications.

This book offers valuable insights into how cutting-edge materials can transform antenna design. It presents a deep dive into the advantages of using nanoferrites, helping readers understand how these materials enhance signal clarity, improve bandwidth, and contribute to the miniaturization of antenna systems without compromising efficiency. By integrating both theoretical perspectives and experimental findings, the content serves as a practical guide for improving real-world wireless communication systems. Readers will benefit from the structured presentation of design strategies, material synthesis methods, and performance optimization techniques. The book bridges the gap between advanced materials research and practical antenna engineering, empowering professionals to develop smarter, more efficient antennas. It is primarily intended for graduate students, academic researchers, antenna designers, and engineers working at the intersection of materials science and wireless technology.

This book presents a comprehensive study on the design of conformal array antennas and beamforming technologies for emergency communication in complex terrains such as mountainous, forested, and hilly environments. It introduces pioneering balloon-mounted conformal arrays for wideband, wide-coverage operations, polarization-reconfigurable antennas for mobile platforms like UAVs and wearable systems, and intelligent sparse array optimization algorithms for robust interference suppression. Covering system architecture, design principles, simulations, and experimental validations, this book serves as a valuable reference for researchers, engineers, and graduate students in wireless communications, antenna systems, and emergency response technologies.

This book will employ physical modeling and mathematical derivation to develop an analytical theory for electromagnetic metasurface, which aims to deepen physical mechanisms and lays a solid theoretical foundation for further research on metasurfaces. Firstly, the book presents the general description of metasurface boundary conditions and key calculation methods, Secondly, the book develops the network transmission theory for multi-layer metasurface structures, yielding mathematical model of metasurface-based polarization converters. Thirdly, the book establishes the electromagnetic theory of complementary metasurfaces at dielectric interfaces, overcoming limitations of existing Babinet principle applications. Fourthly, the book investigates the quantitative impact of dielectric interface on the metallic metasurface structures and extend the concept of effective dielectric constant. Fifthly, the book establishes the dispersion theory of gap waveguides, linking metasurface periodicity principles to waveguide dispersion characteristics and mode propagation behavior. Finally, the book focuses on the reciprocity principle for metasurface scattering coefficients. The book is intended for students and researchers who are interested in electromagnetic metasurface and electromagnetic theory.

This book delves deeply into the substrate integrated suspended line antenna technologies and evaluates its potential to replace conventional three-dimensional (3D) metal-based antennas. Over the years, studies on substrate integrated suspended line antennas have captivated engineers and scientists from the antennas and related engineering fields, all aiming to achieve low-cost and low-loss characteristics. The book establishes a fundamental framework for this topic, while emphasizing the importance of substrate integrated suspended line antennas in the wireless communication and radar systems. It is designed for undergraduate and graduate students who are interested in antenna technology, researchers investigating substrate integrated technology, and antenna engineers working on low-cost and low-loss antennas and arrays.

This book delves deeply into the substrate integrated suspended line antenna technologies and evaluates its potential to replace conventional three-dimensional (3D) metal-based antennas. Over the years, studies on substrate integrated suspended line antennas have captivated engineers and scientists from the antennas and related engineering fields, all aiming to achieve low-cost and low-loss characteristics. The book establishes a fundamental framework for this topic, while emphasizing the importance of substrate integrated suspended line antennas in the wireless communication and radar systems. It is designed for undergraduate and graduate students who are interested in antenna technology, researchers investigating substrate integrated technology, and antenna engineers working on low-cost and low-loss antennas and arrays.

This book focuses on the multi-beam phased array antenna as a satellite ground station. As there are already many excellent books on phased array antennas in the literature, this book focuses mainly on some engineering practices and fills the gap between principles and practices, such as array excitation error impact analysis and calibration methods, array geometry design for hemispherical coverage, multiple beam resource management, etc. This book is particularly suitable for readers interested in satellite constellation design or satellite ground station design. This book also benefits researchers and engineers in the fields of phased array antennas, aerospace engineering, telecommunications, etc.

This book focuses on the multi-beam phased array antenna as a satellite ground station. As there are already many excellent books on phased array antennas in the literature, this book focuses mainly on some engineering practices and fills the gap between principles and practices, such as array excitation error impact analysis and calibration methods, array geometry design for hemispherical coverage, multiple beam resource management, etc. This book is particularly suitable for readers interested in satellite constellation design or satellite ground station design. This book also benefits researchers and engineers in the fields of phased array antennas, aerospace engineering, telecommunications, etc.

This book is the first ever monograph on nematic liquid crystals for microwaves, millimeter waves and terahertz waves. It presents the first hand independent studies on nematic liquid crystals for microwaves, millimeter waves and terahertz waves. This book opens with an introduction to generic liquid crystals and a retrospective review about nematic liquid crystals in microwaves, millimeter waves and terahertz waves. Attention is then focused on the latest in-house progress on microwave, millimeter wave and terahertz nematic liquid crystals. Synthesis and characterization of novel nematic liquid crystals are first presented, followed by indigenous technologies to manufacture functional nematic liquid crystal devices for microwaves, millimeter waves and terahertz waves. A few self-developed representative advanced functional devices are shown to demonstrate the promising perspective of liquid crystals for not only microwaves, millimeter waves and terahertz waves but also many other non-display applications. The presented studies will attract scientists, engineers and students from various disciplines, such as materials, chemical, electrical, biological, and biomedical engineering. The book is intended for undergraduates, graduates, researchers, professionals and industrial practitioners who are interested in developing novel liquid crystals and further extending liquid crystals beyond display.

This book is the first ever monograph on nematic liquid crystals for microwaves, millimeter waves and terahertz waves. It presents the first hand independent studies on nematic liquid crystals for microwaves, millimeter waves and terahertz waves. This book opens with an introduction to generic liquid crystals and a retrospective review about nematic liquid crystals in microwaves, millimeter waves and terahertz waves. Attention is then focused on the latest in-house progress on microwave, millimeter wave and terahertz nematic liquid crystals. Synthesis and characterization of novel nematic liquid crystals are first presented, followed by indigenous technologies to manufacture functional nematic liquid crystal devices for microwaves, millimeter waves and terahertz waves. A few self-developed representative advanced functional devices are shown to demonstrate the promising perspective of liquid crystals for not only microwaves, millimeter waves and terahertz waves but also many other non-display applications. The presented studies will attract scientists, engineers and students from various disciplines, such as materials, chemical, electrical, biological, and biomedical engineering. The book is intended for undergraduates, graduates, researchers, professionals and industrial practitioners who are interested in developing novel liquid crystals and further extending liquid crystals beyond display.

This book presents a modified spherical harmonic expansion method in which the electromagnetic fields and their sources are expanded with the same set of spherical vector basis functions in a similar procedure. Explicit expressions for the electromagnetic fields, potentials, energies, and the related Green’s functions are derived for the spherical modes in both frequency domain and time domain. Based on the formulation, the relationships between the electromagnetic sources, the electromagnetic far fields, and the electromagnetic near fields are clearly revealed. In particular, a nonuniform transmission line model is developed for intuitively characterizing the total radiation process. The introduction of the cutoff radius and the cutoff mode degree provides a simple reference for determining the numbers of degrees of freedom of the fields associated with sources in a bounded region. Based on the theory, an efficient hybrid method for synthesizing antenna arrays with complex footprints is proposed and demonstrated with several numerical examples. Effective algorithms are also developed for reconstructing the radiating part of the current sources.This book is intended for researchers, engineers, and graduate students who are interested in studying the energy transfer in electromagnetic radiation, synthesis and measurement of antenna arrays, and applications of inverse electromagnetic source problems.