Sustainable Energy Developments – serie

Aircraft emissions currently account for ~3.5% of all greenhouse gas emissions. The number of passenger miles has increased by 5% annually despite 9/11, two wars and gloomy economic conditions. Since aircraft have no viable alternative to the internal combustion engine, improvements in aircraft efficiency and alternative fuel development become essential. This book comprehensively covers the relevant issues in green aviation. Environmental impacts, technology advances, public policy and economics are intricately linked to the pace of development that will be realized in the coming decades. Experts from NASA, industry and academia review current technology development in green aviation that will carry the industry through 2025 and beyond. This includes increased efficiency through better propulsion systems, reduced drag airframes, advanced materials and operational changes. Clean combustion and emission control of noise, exhaust gases and particulates are also addressed through combustor design and the use of alternative fuels. Economic imperatives from aircraft lifetime and maintenance logistics dictate the drive for "drop-in" fuels, blending jet-grade and biofuel. New certification standards for alternative fuels are outlined. Life Cycle Assessments are used to evaluate worldwide biofuel approaches, highlighting that there is no single rational approach for sustainable buildup. In fact, unless local conditions are considered, the use of biofuels can create a net increase in environmental impact as a result of biofuel manufacturing processes. Governmental experts evaluate current and future regulations and their impact on green aviation. Sustainable approaches to biofuel development are discussed for locations around the globe, including the US, EU, Brazil, China and India.

The agri-food chain consumes about one third of the world’s energy production with about 12% of it for crop production and nearly 80% for processing, distribution, retail, preparation and cooking. The agri-food chain also accounts for 80-90% of total global freshwater use where 70% alone is for irrigation. Additionally, on a global scale, freshwater production consumes nearly 15% of the entire energy production. It can therefore be argued that making agriculture and the agri-food supply chain independent from fossil fuel use has a huge potential to contribute to global food security and climate protection not only for the next decades but also for the coming century. Provision of secure, accessible and environmentally sustainable supplies of water, energy and food must thus be a priority. One of the major objectives of the world’s scientists, farmers, decisions makers and industrialists is to overcome the present dependence on fossil fuels in the agro-food sector. This dependency increases the volatility of food prices and affects economic access to sustenance. This book provides a critical review of recent developments in solar, wind and geothermal energy applications in agriculture and the agro-food sector such as processing, distribution, retail, preparation and cooking.

Providing a complete and in-depth overview of the available knowledge in the area of low energy and low carbon architecture. The scope of this edited book includes several important topics ranging from chapters giving a broad view of the progressing models in ecologically responsible environments to other chapters focussing on recent advances in design strategies and building technologies in low energy heating, cooling, daylighting, materials, and building sustainable systems. Two other essential topics are covered, providing a link between theory and implementation: sustainable energy policies/standards and performance modeling in low energy architecture. Finally, the book will give the readers insight into the future of low energy and low carbon architecture in the beyond-green era and discussed in the broader context of the progressing theories of regenerative design.

This book redefines climate protection measures and readjusts climate protection targets in line with what is scientifically necessary and economically feasible. The reader is provided with an overview of recent developments and failings in, and successful instruments for, fighting climate change and global warming.Effective climate protection measures rest on two pillars: stopping all greenhouse gas emissions and cleaning the atmosphere of spare carbon. Both are possible, if the use of fossil fuels in the energy, transport, construction and chemistry sectors is terminated and the decision is made to consistently switch to a world economy with zero emissions instead. Global Feed-in-Tariffs can provide incentives for renewable energies as the German Feed-in-Tariff has proven – a measure which has been copied by almost 70 nations around the world. At the same time agricultural practices are necessary to support an increase in biodiversity, e.g. re-greening the desert, afforestation and organic agriculture and active storage of atmospheric carbon emissions within agricultural soils.This book demonstrates that investment in renewable energies and a sustainable economy is not only a worthwhile cause but also has an economic value. The book introduces new actors such as the financial industry as an investor and political actor. If the financial industry becomes a political actor and calls for a necessary regulatory framework, more nations will follow - accompanied by an economic benefit - which will create a class of pioneer nations instead of the ever failing project of a global climate agreement. The transformation of the world economy can be accelerated through the right political measures. Active legislative support is necessary, for example the implementation of Feed-in-Tariffs for renewable energies, ending all subsidies for fossil fuels and the internalization of external damage costs such as nuclear waste management.Global warming does not have to be our inescapable fate. If mankind pursues the right climate protection strategies, the earth can be cooled down to an acceptable level in a few decades.

Global energy use is approximately 140 000 TWh per year. Interestingly, biomass production amounts to approximately 270 000 TWh per year, or roughly twice as much, whereas the official figure of biomass use for energy applications is 10-13% of the global energy use. This shows that biomass is not a marginal energy resource but more than capable of meeting all our energy and food needs, provided it is used efficiently. The use of food in generating energy has been extensively debated, but there is actually no need for it given the comprehensive resources available from agriculture and forestry waste.This book discusses the biomass resources available and aspects like efficient energy use. One way of using energy efficiently is to use waste biomass or cellulosic materials in biorefineries, where production of fibers and products from fibers is combined with production of most chemicals we need in our daily life. Such products include clothes, soap, perfume, medicines etc. Conventional pulp and paper applications, bio-fuel for vehicles and even fuel for aviation as well as heat and power production are covered. The problem with biomass is not availability, but the difficulty to use the resources efficiently without harming the long-term productivity. This book covers all types of resources on a global scale, making it unique. Many researchers from all over the world have contributed to give a good coverage of all the different international perspectives.This book will provide facts and inspiration to professionals, engineers, researchers, and students as well as to those working for various authorities and organizations.

Officially, the use of biomass for energy meets only 10-13% of the total global energy demand of 140 000 TWh per year. Still, thirty years ago the official figure was zero, as only traded biomass was included. While the actual production of biomass is in the range of 270 000 TWh per year, most of this is not used for energy purposes, and mostly it is not used very efficiently. Therefore, there is a need for new methods for converting biomass into refined products like chemicals, fuels, wood and paper products, heat, cooling and electric power. Obviously, some biomass is also used as food – our primary life necessity. The different types of conversion methods covered in this volume are biogas production, bio-ethanol production, torrefaction, pyrolysis, high temperature gasifi cation and combustion.This book covers the suitability of different methods for conversion of different types of biomass. Different versions of the conversion methods are presented – both existing methods and those being developed for the future. System optimization using modeling methods and simulation are analyzed to determine advantages and disadvantages of different solutions. Many international experts have contributed to provide an up-to-date view of the situation all over the world. These global perspectives and the inclusion of so much expertise of distinguished international researchers and professionals make this book unique.This book will prove useful and inspiring to professionals, engineers, researchers and students as well as to those working for different authorities and organizations.

Worldwide, many regions have a great potential to cover part of their pressing water needs by renewable energy powered water treatment processes using either thermal or membrane based technologies. Not only arid and semiarid regions are increasingly suffering from water shortage but also many other regions face a limitation of freshwater resources either by increasing contamination of surface water bodies or groundwater resources unsuitable for drinking and irrigation purposes either due to their high grade of mineralization or their contents of toxic components. In many areas without centralized water supply, treatment techniques using locally available renewable energy resources such as wind, solar and geothermal can provide an economical, social and environmentally sustainable option for clean water production from seawater and from highly mineralized or otherwise unsuitable ground- and surface water.This book provides an overview on possible cost-efficient techniques and application opportunities for different scales and shows why the implementation of these technologies faces numerous technological, economic and policy barriers and provides suggestions how they can be overcome. It serves as a synoptic compendium of the fundamentals of freshwater production using renewable energies, applicable to all types of water, ranging from brackish to marine water and also including industrial and communal residual water. The book is aimed at professionals, academics and decision makers worldwide, working in the areas of water resources, water supply,land planning, energy planning, greenhouse gases emission mitigation and rural development.

Aircraft emissions currently account for ~3.5% of all greenhouse gas emissions. The number of passenger miles has increased by 5% annually despite 9/11, two wars and gloomy economic conditions. Since aircraft have no viable alternative to the internal combustion engine, improvements in aircraft efficiency and alternative fuel development become essential. This book comprehensively covers the relevant issues in green aviation. Environmental impacts, technology advances, public policy and economics are intricately linked to the pace of development that will be realized in the coming decades. Experts from NASA, industry and academia review current technology development in green aviation that will carry the industry through 2025 and beyond. This includes increased efficiency through better propulsion systems, reduced drag airframes, advanced materials and operational changes. Clean combustion and emission control of noise, exhaust gases and particulates are also addressed through combustor design and the use of alternative fuels. Economic imperatives from aircraft lifetime and maintenance logistics dictate the drive for "drop-in" fuels, blending jet-grade and biofuel. New certification standards for alternative fuels are outlined. Life Cycle Assessments are used to evaluate worldwide biofuel approaches, highlighting that there is no single rational approach for sustainable buildup. In fact, unless local conditions are considered, the use of biofuels can create a net increase in environmental impact as a result of biofuel manufacturing processes. Governmental experts evaluate current and future regulations and their impact on green aviation. Sustainable approaches to biofuel development are discussed for locations around the globe, including the US, EU, Brazil, China and India.

The discussion about energy perspectives beyond 2020, up to 2030 and eventually 2050 has started. There seems to be a verbal consensus on the necessity of ambitious climate change mitigation policies, without a convincing perspective of the necessary policy decisions to be reached in due time. Methods to achieve greenhouse gas reduction as well as energy security vary from aiming for 100% renewable energies and setting up appropriate policy frameworks to implementing a mix of renewables comprising so-called clean fossil and nuclear energy. This book provides an analysis of the different approaches and the reasons why there is no sustainable alternative to aiming for 100% renewables – and how this vision could come true. The book provides an overview and in-depth analysis of a vital debate. It describes how the present policy framework with 2020-targets for the share of renewables, for increase of energy efficiency and for greenhouse gas emissions reduction was developed and how it has been implemented so far. Furthermore, it describes and analyses the emerging debate about the future of our energy system and the necessary next steps and targets leading up to 2030.

This book redefines climate protection measures and readjusts climate protection targets in line with what is scientifically necessary and economically feasible. The reader is provided with an overview of recent developments and failings in, and successful instruments for, fighting climate change and global warming.Effective climate protection measures rest on two pillars: stopping all greenhouse gas emissions and cleaning the atmosphere of spare carbon. Both are possible, if the use of fossil fuels in the energy, transport, construction and chemistry sectors is terminated and the decision is made to consistently switch to a world economy with zero emissions instead. Global Feed-in-Tariffs can provide incentives for renewable energies as the German Feed-in-Tariff has proven – a measure which has been copied by almost 70 nations around the world. At the same time agricultural practices are necessary to support an increase in biodiversity, e.g. re-greening the desert, afforestation and organic agriculture and active storage of atmospheric carbon emissions within agricultural soils.This book demonstrates that investment in renewable energies and a sustainable economy is not only a worthwhile cause but also has an economic value. The book introduces new actors such as the financial industry as an investor and political actor. If the financial industry becomes a political actor and calls for a necessary regulatory framework, more nations will follow - accompanied by an economic benefit - which will create a class of pioneer nations instead of the ever failing project of a global climate agreement. The transformation of the world economy can be accelerated through the right political measures. Active legislative support is necessary, for example the implementation of Feed-in-Tariffs for renewable energies, ending all subsidies for fossil fuels and the internalization of external damage costs such as nuclear waste management.Global warming does not have to be our inescapable fate. If mankind pursues the right climate protection strategies, the earth can be cooled down to an acceptable level in a few decades.

Fuel cells are clean and efficient energy conversion devices expected to be the next generation power source. During more than 17 decades of research and development, various types of fuel cells have been developed with a view to meet the different energy demands and application requirements. Scientists have devoted a great deal of time and effort to the development and commercialization of fuel cells important for our daily lives. However, abundant issues, ranging from mechanistic study to system integration, still need to be figured out before massive applications can be used. Miniaturization is one of the main bottlenecks for the advancement and further development of fuel cells. Thus, research on miniaturization of fuel cells as well as understanding the micro and nano structural effect on fuel cell performance are necessary and of great interest to solve the challenges ahead.In this book, internationally acclaimed experts illustrate how micro & nano engineering technology can be applied as a way of removing the restrictions presently faced by fuel cells both technically and theoretically. Through the twelve well designed chapters, major issues related to the miniaturization of different types of fuel cells are addressed. Theory focusing on micro and nano scale mechanics are outlined to better optimize the performance of fuel cells from laboratory scale to industrial scale. This book will be a good reference to those scientists and researchers interested in developing fuel cells through micro and nano scale engineering.

Sustainability in agriculture and associated primary industries, which are both energy-intensive, is crucial for the development of any country. Increasing scarcity and resulting high fossil fuel prices combined with the need to significantly reduce greenhouse gas emissions, make the improvement of energy efficient farming and increased use of renewable energy essential.This book provides a technological and scientific endeavor to assist society and farming communities in different regions and scales to improve their productivity and sustainability. To fulfill future needs of a modern sustainable agriculture, this book addresses highly actual topics providing innovative, effective and more sustainable solutions for agriculture by using sustainable, environmentally friendly, renewable energy sources and modern energy efficient, cost-improved technologies. The book highlights new areas of research, and further R&D needs. It helps to improve food security for the rapidly growing world population and to reduce carbon dioxide emissions from fossil fuel use in agriculture, which presently contributes 22% of the global carbon dioxide emissions. This book provides a source of information, stimuli and incentives for what and how new and energy efficient technologies can be applied as effective tools and solutions in agricultural production to satisfy the continually increasing demand for food and fibre in an economically sustainable way, while contributing to global climate change mitigation. It will be useful and inspiring to decision makers working in different authorities, professionals, agricultural engineers, researchers, and students concerned with agriculture and related primay industries, sustainable energy development and climate change mitigation projects.

Advanced Oxidation Technologies (AOTs) or Processes (AOPs) are relatively new and innovative technologies to remove harmful and toxic pollutants. The most important processes among them are those using light, such as UVC/H2O2, photo-Fenton and heterogeneous photocatalysis with TiO2. These technologies are also relatively low-cost and therefore useful for countries under development, where the economical resources are scarcer than in developed countries.This book provides a state-of-the-art overview on environmental applications of Advanced Oxidation Technologies (AOTs) as sustainable, low-cost and low-energy consuming treatments for water, air, and soil. It includes information on innovative research and development on TiO2 photocatalytic redox processes, Fenton, Photo-Fenton processes, zerovalent iron technology, and others, highlighting possible applications of AOTs in both developing and industrialized countries around the world in the framework of “A crosscutting and comprehensive look at environmental problems”.The book is aimed at professionals and academics worldwide, working in the areas of water resources, water supply, environmental protection, and will be a useful information source for decision and policy makers and other stakeholders working on solutions for environmental problems.

A comprehensive mathematical and computational modeling of CO2 Geosequestration and Compressed Air Energy StorageEnergy and environment are two interrelated issues of great concern to modern civilization. As the world population will soon reach eight billion, the demand for energy will dramatically increase, intensifying the use of fossil fuels. Utilization of fossil fuels is by far the largest anthropogenic source of CO2 emission into the earth’s atmosphere. This unavoidable reality necessitates efforts to mitigate CO2 from indefi nitely being emitted in the atmosphere. CO2 geo-sequestration is currently considered to be a vital technology for this purpose. Meanwhile, and as fossil fuels will sooner or later be depleted, utilization of renewable energy resources is inevitable. Nowadays, wind and solar energy, being clean and sustainable, are gaining momentum. However, their availability is intermittent. This intermittent nature of solar and wind energy necessitates storing the produced energy at off-peak times for later use. Compressed air energy storage in subterranean caverns, aquifers and coal seams is currently considered to be a plausible technology for this purpose. CO2 geo-sequestration and compressed air energy storage are thus vital technologies for current and future energy strategy development. These technologies can be made safe and cost-effective by utilizing computational tools capable of simulating the involved multiphysical phenomena and processes. Computational modeling of such systems is challenging and resource-consuming. Meeting such a challenge constitutes the focal point of this book.This book addresses comprehensive theoretical and computational modeling aspects of CO2 geosequestration and compressed air energy storage. The book consists of 16 chapters authored by prominent researchers in these two fi elds. The authors of the book endeavoured to present years of innovative work, making it available for a wide range of readers, including geoscientists, poromechanists, applied mathematicians, computational geoscientists, geologists and reservoir engineers.

Air quality has a direct influence on health, welfare and production performance of livestock as the high concentrations of noxious gases, dust and airborne microorganisms are likely to reduce production efficiency and the general welfare of farm animals. Long term exposure to particulates in livestock buildings might also affect the respiratory health of farm workers. Dust in animal buildings contains many biologically active substances such as bacteria, fungi, endotoxins and residues of antibiotics (as a result of veterinary treatments) that are suspected to be hazardous to human health. Furthermore, air pollutants emitted from livestock buildings can reduce air, water and soil quality and can potentially undermine the health of nearby residents. Airborne emissions include ammonia, methane, nitrous oxide, particulates like dust and microorganisms. In addition, other potentially harmful substances such as heavy metals, antibiotic residues and components of disinfectants might be also emitted from livestock building that are potentially damaging to ecosystems. In this book, key aspects of agricultural air quality, such as monitoring, managing and reducing airborne pollutants in and around livestock facilities are reviewed. Features:addressing the raising awareness of the importance of optimal health and welfare for lifestock specieswith contributions from international specialists and researchersproviding up-to-date information for professionals involved in modern animal productiThis book will be useful for farming professionals, academics, students, policy makers, business leaders, regulatory bodies and agricultural consultants.

The agri-food chain consumes about one third of the world’s energy production with about 12% of it for crop production and nearly 80% for processing, distribution, retail, preparation and cooking. The agri-food chain also accounts for 80-90% of total global freshwater use where 70% alone is for irrigation. Additionally, on a global scale, freshwater production consumes nearly 15% of the entire energy production. It can therefore be argued that making agriculture and the agri-food supply chain independent from fossil fuel use has a huge potential to contribute to global food security and climate protection not only for the next decades but also for the coming century. Provision of secure, accessible and environmentally sustainable supplies of water, energy and food must thus be a priority. One of the major objectives of the world’s scientists, farmers, decisions makers and industrialists is to overcome the present dependence on fossil fuels in the agro-food sector. This dependency increases the volatility of food prices and affects economic access to sustenance. This book provides a critical review of recent developments in solar, wind and geothermal energy applications in agriculture and the agro-food sector such as processing, distribution, retail, preparation and cooking.

Advanced Oxidation Technologies (AOTs) or Processes (AOPs) are relatively new and innovative technologies to remove harmful and toxic pollutants. The most important processes among them are those using light, such as UVC/H2O2, photo-Fenton and heterogeneous photocatalysis with TiO2. These technologies are also relatively low-cost and therefore useful for countries under development, where the economical resources are scarcer than in developed countries.This book provides a state-of-the-art overview on environmental applications of Advanced Oxidation Technologies (AOTs) as sustainable, low-cost and low-energy consuming treatments for water, air, and soil. It includes information on innovative research and development on TiO2 photocatalytic redox processes, Fenton, Photo-Fenton processes, zerovalent iron technology, and others, highlighting possible applications of AOTs in both developing and industrialized countries around the world in the framework of “A crosscutting and comprehensive look at environmental problems”.The book is aimed at professionals and academics worldwide, working in the areas of water resources, water supply, environmental protection, and will be a useful information source for decision and policy makers and other stakeholders working on solutions for environmental problems.

Global energy use is approximately 140 000 TWh per year. Interestingly, biomass production amounts to approximately 270 000 TWh per year, or roughly twice as much, whereas the official figure of biomass use for energy applications is 10-13% of the global energy use. This shows that biomass is not a marginal energy resource but more than capable of meeting all our energy and food needs, provided it is used efficiently. The use of food in generating energy has been extensively debated, but there is actually no need for it given the comprehensive resources available from agriculture and forestry waste.This book discusses the biomass resources available and aspects like efficient energy use. One way of using energy efficiently is to use waste biomass or cellulosic materials in biorefineries, where production of fibers and products from fibers is combined with production of most chemicals we need in our daily life. Such products include clothes, soap, perfume, medicines etc. Conventional pulp and paper applications, bio-fuel for vehicles and even fuel for aviation as well as heat and power production are covered. The problem with biomass is not availability, but the difficulty to use the resources efficiently without harming the long-term productivity. This book covers all types of resources on a global scale, making it unique. Many researchers from all over the world have contributed to give a good coverage of all the different international perspectives.This book will provide facts and inspiration to professionals, engineers, researchers, and students as well as to those working for various authorities and organizations.

A comprehensive mathematical and computational modeling of CO2 Geosequestration and Compressed Air Energy StorageEnergy and environment are two interrelated issues of great concern to modern civilization. As the world population will soon reach eight billion, the demand for energy will dramatically increase, intensifying the use of fossil fuels. Utilization of fossil fuels is by far the largest anthropogenic source of CO2 emission into the earth’s atmosphere. This unavoidable reality necessitates efforts to mitigate CO2 from indefi nitely being emitted in the atmosphere. CO2 geo-sequestration is currently considered to be a vital technology for this purpose. Meanwhile, and as fossil fuels will sooner or later be depleted, utilization of renewable energy resources is inevitable. Nowadays, wind and solar energy, being clean and sustainable, are gaining momentum. However, their availability is intermittent. This intermittent nature of solar and wind energy necessitates storing the produced energy at off-peak times for later use. Compressed air energy storage in subterranean caverns, aquifers and coal seams is currently considered to be a plausible technology for this purpose. CO2 geo-sequestration and compressed air energy storage are thus vital technologies for current and future energy strategy development. These technologies can be made safe and cost-effective by utilizing computational tools capable of simulating the involved multiphysical phenomena and processes. Computational modeling of such systems is challenging and resource-consuming. Meeting such a challenge constitutes the focal point of this book.This book addresses comprehensive theoretical and computational modeling aspects of CO2 geosequestration and compressed air energy storage. The book consists of 16 chapters authored by prominent researchers in these two fi elds. The authors of the book endeavoured to present years of innovative work, making it available for a wide range of readers, including geoscientists, poromechanists, applied mathematicians, computational geoscientists, geologists and reservoir engineers.

In the region comprising Turkey and Greece, people have been using water from geothermal sources for bathing and washing of clothes since ancient times. This region falls within the Alpine-Himalayan orogenic belt and hence is a locus of active volcanism and tectonism and experiences frequent seismic events. This volcanic and tectonic activity has given rise to over 1500 geothermal springs. Its importance was recognized decades ago and the geothermal water is now being utilized for district heating, industrial processing, domestic water supply, balneology and electric power generation. The geothermal potential in this region is large. In Turkey alone it is estimated to be more than 31500 MWt while the proven potential is 4078 MWt. At present 2084 MWt is being utilized for direct applications in Turkey and 135 MWt in Greece. In Turkey electricity is produced for 166 MW installed capacity, whereas in Greece geothermal energy is presently not used for electricity production despite its potential.This book discusses the geochemical evolution of the thermal waters and thermal gases in terms of the current volcano-tectonic setting and associated geological framework that makes the region very important to the geothermal scientific community. The book explains, in a didactic way, the possible applications, depending on local conditions and scales, and it presents new and stimulating ideas for future developments of this renewable energy source. Additionally, the book discusses the role(s) of possible physicochemical processes in deep hydrothermal systems, the volatile provenance and relative contributions of mantle and crustal components to total volatile inventories. It provides the reader with a thorough understanding of the geothermal systems of this region and identifi es the most suitable solutions for specifi c tasks and needs elsewhere in the world. It is the fi rst time that abundant information and data from this region, obtained from intensive research during the last few decades, is unveiled to the international geothermal community. Thus, an international readership, in the professional and academic sectors, as well as in key institutions that deal with geothermal energy, will benefit from the knowledge from geothermal research and experiences obtained from the Aegean Region.

Worldwide, many regions have a great potential to cover part of their pressing water needs by renewable energy powered water treatment processes using either thermal or membrane based technologies. Not only arid and semiarid regions are increasingly suffering from water shortage but also many other regions face a limitation of freshwater resources either by increasing contamination of surface water bodies or groundwater resources unsuitable for drinking and irrigation purposes either due to their high grade of mineralization or their contents of toxic components. In many areas without centralized water supply, treatment techniques using locally available renewable energy resources such as wind, solar and geothermal can provide an economical, social and environmentally sustainable option for clean water production from seawater and from highly mineralized or otherwise unsuitable ground- and surface water.This book provides an overview on possible cost-efficient techniques and application opportunities for different scales and shows why the implementation of these technologies faces numerous technological, economic and policy barriers and provides suggestions how they can be overcome. It serves as a synoptic compendium of the fundamentals of freshwater production using renewable energies, applicable to all types of water, ranging from brackish to marine water and also including industrial and communal residual water. The book is aimed at professionals, academics and decision makers worldwide, working in the areas of water resources, water supply,land planning, energy planning, greenhouse gases emission mitigation and rural development.

Sustainability in agriculture and associated primary industries, which are both energy-intensive, is crucial for the development of any country. Increasing scarcity and resulting high fossil fuel prices combined with the need to significantly reduce greenhouse gas emissions, make the improvement of energy efficient farming and increased use of renewable energy essential.This book provides a technological and scientific endeavor to assist society and farming communities in different regions and scales to improve their productivity and sustainability. To fulfill future needs of a modern sustainable agriculture, this book addresses highly actual topics providing innovative, effective and more sustainable solutions for agriculture by using sustainable, environmentally friendly, renewable energy sources and modern energy efficient, cost-improved technologies. The book highlights new areas of research, and further R&D needs. It helps to improve food security for the rapidly growing world population and to reduce carbon dioxide emissions from fossil fuel use in agriculture, which presently contributes 22% of the global carbon dioxide emissions. This book provides a source of information, stimuli and incentives for what and how new and energy efficient technologies can be applied as effective tools and solutions in agricultural production to satisfy the continually increasing demand for food and fibre in an economically sustainable way, while contributing to global climate change mitigation. It will be useful and inspiring to decision makers working in different authorities, professionals, agricultural engineers, researchers, and students concerned with agriculture and related primay industries, sustainable energy development and climate change mitigation projects.

Officially, the use of biomass for energy meets only 10-13% of the total global energy demand of 140 000 TWh per year. Still, thirty years ago the official figure was zero, as only traded biomass was included. While the actual production of biomass is in the range of 270 000 TWh per year, most of this is not used for energy purposes, and mostly it is not used very efficiently. Therefore, there is a need for new methods for converting biomass into refined products like chemicals, fuels, wood and paper products, heat, cooling and electric power. Obviously, some biomass is also used as food – our primary life necessity. The different types of conversion methods covered in this volume are biogas production, bio-ethanol production, torrefaction, pyrolysis, high temperature gasifi cation and combustion.This book covers the suitability of different methods for conversion of different types of biomass. Different versions of the conversion methods are presented – both existing methods and those being developed for the future. System optimization using modeling methods and simulation are analyzed to determine advantages and disadvantages of different solutions. Many international experts have contributed to provide an up-to-date view of the situation all over the world. These global perspectives and the inclusion of so much expertise of distinguished international researchers and professionals make this book unique.This book will prove useful and inspiring to professionals, engineers, researchers and students as well as to those working for different authorities and organizations.

The discussion about energy perspectives beyond 2020, up to 2030 and eventually 2050 has started. There seems to be a verbal consensus on the necessity of ambitious climate change mitigation policies, without a convincing perspective of the necessary policy decisions to be reached in due time. Methods to achieve greenhouse gas reduction as well as energy security vary from aiming for 100% renewable energies and setting up appropriate policy frameworks to implementing a mix of renewables comprising so-called clean fossil and nuclear energy. This book provides an analysis of the different approaches and the reasons why there is no sustainable alternative to aiming for 100% renewables – and how this vision could come true. The book provides an overview and in-depth analysis of a vital debate. It describes how the present policy framework with 2020-targets for the share of renewables, for increase of energy efficiency and for greenhouse gas emissions reduction was developed and how it has been implemented so far. Furthermore, it describes and analyses the emerging debate about the future of our energy system and the necessary next steps and targets leading up to 2030.

Fuel cells are clean and efficient energy conversion devices expected to be the next generation power source. During more than 17 decades of research and development, various types of fuel cells have been developed with a view to meet the different energy demands and application requirements. Scientists have devoted a great deal of time and effort to the development and commercialization of fuel cells important for our daily lives. However, abundant issues, ranging from mechanistic study to system integration, still need to be figured out before massive applications can be used. Miniaturization is one of the main bottlenecks for the advancement and further development of fuel cells. Thus, research on miniaturization of fuel cells as well as understanding the micro and nano structural effect on fuel cell performance are necessary and of great interest to solve the challenges ahead.In this book, internationally acclaimed experts illustrate how micro & nano engineering technology can be applied as a way of removing the restrictions presently faced by fuel cells both technically and theoretically. Through the twelve well designed chapters, major issues related to the miniaturization of different types of fuel cells are addressed. Theory focusing on micro and nano scale mechanics are outlined to better optimize the performance of fuel cells from laboratory scale to industrial scale. This book will be a good reference to those scientists and researchers interested in developing fuel cells through micro and nano scale engineering.

In the region comprising Turkey and Greece, people have been using water from geothermal sources for bathing and washing of clothes since ancient times. This region falls within the Alpine-Himalayan orogenic belt and hence is a locus of active volcanism and tectonism and experiences frequent seismic events. This volcanic and tectonic activity has given rise to over 1500 geothermal springs. Its importance was recognized decades ago and the geothermal water is now being utilized for district heating, industrial processing, domestic water supply, balneology and electric power generation. The geothermal potential in this region is large. In Turkey alone it is estimated to be more than 31500 MWt while the proven potential is 4078 MWt. At present 2084 MWt is being utilized for direct applications in Turkey and 135 MWt in Greece. In Turkey electricity is produced for 166 MW installed capacity, whereas in Greece geothermal energy is presently not used for electricity production despite its potential.This book discusses the geochemical evolution of the thermal waters and thermal gases in terms of the current volcano-tectonic setting and associated geological framework that makes the region very important to the geothermal scientific community. The book explains, in a didactic way, the possible applications, depending on local conditions and scales, and it presents new and stimulating ideas for future developments of this renewable energy source. Additionally, the book discusses the role(s) of possible physicochemical processes in deep hydrothermal systems, the volatile provenance and relative contributions of mantle and crustal components to total volatile inventories. It provides the reader with a thorough understanding of the geothermal systems of this region and identifi es the most suitable solutions for specifi c tasks and needs elsewhere in the world. It is the fi rst time that abundant information and data from this region, obtained from intensive research during the last few decades, is unveiled to the international geothermal community. Thus, an international readership, in the professional and academic sectors, as well as in key institutions that deal with geothermal energy, will benefit from the knowledge from geothermal research and experiences obtained from the Aegean Region.