Susai Rajendran is Research Director, Professor of Chemistry St. Antony’s College of Arts and Sciences For Women, India. His research is in the field of corrosion science and engineering, nanotechnology, applications of nanomaterials in corrosion protection study, and environmental studies. Saeid Kakooei is Senior Lecturer at Mechanical Engineering Department, Universiti Teknologi Petronas, Malaysia. His research focuses in the areas of corrosion and failure analysis Is a Assistant Professor in research scientist at the Department of Materials Science and Engineering,Faculty of Engineering, Shahid Chamran University of Ahvaz, Iran. His research is in the area of ,smart corrosion inhibitors for nanocarriers is Professor and Head of the Anhui Key Laboratory of Chemo/Biosensing, College of Chemistry and Materials Science, Anhui Normal University, China. His research focuses in the synthesis and catalysis of nanocomposites. Tuan Anh Nguyen is a Senior Principal Research Scientist at the Institute for Tropical Technology, Vietnam Academy of Science and Technology, Hanoi, Vietnam. He received a BS in physics from Hanoi University in 1992, a BS in economics from Hanoi National Economics University in 1997, and a PhD in chemistry from the Paris Diderot University, France, in 2003. He was a Visiting Scientist at Seoul National University, South Korea, in 2004, and the University of Wollongong, Australia, in 2005. He then worked as a Postdoctoral Research Associate and Research Scientist at Montana State University, United States in 2006-09. In 2012 he was appointed as the Head of the Microanalysis Department at the Institute for Tropical Technology. His research areas of interest include smart sensors, smart networks, smart hospitals, smart cities, complexiverse, and digital twins. He has edited more than 74 books for Elsevier, 12 books for CRC Press, 1 book for Springer, 1 book for RSC, and 2 books for IGI Global. He is the Editor-in-Chief of Kenkyu Journal of Nanotechnology & Nanoscience.

• PART 1: CORROSION AND PROTECTION AT NANOSCALE1. Corrosion protection at nanoscale: An introduction2. Mathematical modelling and simulation of corrosion at nanoscale:3. Nanostructured metals and alloys with low melting point4. Nanocontainer loaded with pH indicator phenolphthalein for corrosion sensing application5. Methods for testing and measurement of metal corrosion at nanoscale6. Methods for fabrication of nanocoatingsPART 2: PROTECTION OF METAL USING NANOSTRUCTURED ALLOYS7. Corrosion resistance of nanostructured metals and alloys8. Nanostructured alloys: Preparation, characterization and anticorrosion property9. Iron based nanostructured alloys10. Nickel based bimetallic nanostructured alloys11. Current industrial application and future perspectivesPART 3: PROTECTION OF METAL USING NANOINHIBITORS12. Metal/metal oxide nanoparticles as corrosion inhibitors13. Corrosion inhibitor loaded smart nanocontainers14. pH‐responsive controlled release of corrosion inhibitor from nanocarriers (nanocapsules)15. Current industrial application and future perspectivesPART 4: PROTECTION OF METAL USING NANOCOATINGS16. Nanocoatings for anticorrosion:  An introduction17. Polymeric nanocomposite coatings18. Metallic nanocomposite coatings19. Ceramic nanocomposite coatings20. Current industrial application and future perspectivesPART 5: ELECTROCHEMICAL CATHODIC PROTECTION USING NANOGENERATORS21. (Numerical) Nanoscale simulation of cathodic protection22. Electrochemical cathodic protection powered by triboelectric nanogenerator23. Self-powered cathodic protection based on the hybrid nanogenerators (by simultaneously harvesting thermal and mechanical energies)24. Current industrial application and future perspectivesPART 6: CONCLUSIONS AND FUTURE PERSPECTIVES25. Current industrial scale up application26. Future scope

Susai Rajendran is Research Director, Professor of Chemistry St. Antony’s College of Arts and Sciences For Women, India. His research is in the field of corrosion science and engineering, nanotechnology, applications of nanomaterials in corrosion protection study, and environmental studies. Saeid Kakooei is Senior Lecturer at Mechanical Engineering Department, Universiti Teknologi Petronas, Malaysia. His research focuses in the areas of corrosion and failure analysis Is a Assistant Professor in research scientist at the Department of Materials Science and Engineering,Faculty of Engineering, Shahid Chamran University of Ahvaz, Iran. His research is in the area of ,smart corrosion inhibitors for nanocarriers is Professor and Head of the Anhui Key Laboratory of Chemo/Biosensing, College of Chemistry and Materials Science, Anhui Normal University, China. His research focuses in the synthesis and catalysis of nanocomposites. Tuan Anh Nguyen is a Senior Principal Research Scientist at the Institute for Tropical Technology, Vietnam Academy of Science and Technology, Hanoi, Vietnam. He received a BS in physics from Hanoi University in 1992, a BS in economics from Hanoi National Economics University in 1997, and a PhD in chemistry from the Paris Diderot University, France, in 2003. He was a Visiting Scientist at Seoul National University, South Korea, in 2004, and the University of Wollongong, Australia, in 2005. He then worked as a Postdoctoral Research Associate and Research Scientist at Montana State University, United States in 2006-09. In 2012 he was appointed as the Head of the Microanalysis Department at the Institute for Tropical Technology. His research areas of interest include smart sensors, smart networks, smart hospitals, smart cities, complexiverse, and digital twins. He has edited more than 74 books for Elsevier, 12 books for CRC Press, 1 book for Springer, 1 book for RSC, and 2 books for IGI Global. He is the Editor-in-Chief of Kenkyu Journal of Nanotechnology & Nanoscience.

• PART 1: CORROSION AND PROTECTION AT NANOSCALE1. Corrosion protection at nanoscale: An introduction2. Mathematical modelling and simulation of corrosion at nanoscale:3. Nanostructured metals and alloys with low melting point4. Nanocontainer loaded with pH indicator phenolphthalein for corrosion sensing application5. Methods for testing and measurement of metal corrosion at nanoscale6. Methods for fabrication of nanocoatingsPART 2: PROTECTION OF METAL USING NANOSTRUCTURED ALLOYS7. Corrosion resistance of nanostructured metals and alloys8. Nanostructured alloys: Preparation, characterization and anticorrosion property9. Iron based nanostructured alloys10. Nickel based bimetallic nanostructured alloys11. Current industrial application and future perspectivesPART 3: PROTECTION OF METAL USING NANOINHIBITORS12. Metal/metal oxide nanoparticles as corrosion inhibitors13. Corrosion inhibitor loaded smart nanocontainers14. pH‐responsive controlled release of corrosion inhibitor from nanocarriers (nanocapsules)15. Current industrial application and future perspectivesPART 4: PROTECTION OF METAL USING NANOCOATINGS16. Nanocoatings for anticorrosion:  An introduction17. Polymeric nanocomposite coatings18. Metallic nanocomposite coatings19. Ceramic nanocomposite coatings20. Current industrial application and future perspectivesPART 5: ELECTROCHEMICAL CATHODIC PROTECTION USING NANOGENERATORS21. (Numerical) Nanoscale simulation of cathodic protection22. Electrochemical cathodic protection powered by triboelectric nanogenerator23. Self-powered cathodic protection based on the hybrid nanogenerators (by simultaneously harvesting thermal and mechanical energies)24. Current industrial application and future perspectivesPART 6: CONCLUSIONS AND FUTURE PERSPECTIVES25. Current industrial scale up application26. Future scope

Susai Rajendran is Research Director, Professor of Chemistry St. Antony’s College of Arts and Sciences For Women, India. His research is in the field of corrosion science and engineering, nanotechnology, applications of nanomaterials in corrosion protection study, and environmental studies. Saeid Kakooei is Senior Lecturer at Mechanical Engineering Department, Universiti Teknologi Petronas, Malaysia. His research focuses in the areas of corrosion and failure analysis Is a Assistant Professor in research scientist at the Department of Materials Science and Engineering,Faculty of Engineering, Shahid Chamran University of Ahvaz, Iran. His research is in the area of ,smart corrosion inhibitors for nanocarriers is Professor and Head of the Anhui Key Laboratory of Chemo/Biosensing, College of Chemistry and Materials Science, Anhui Normal University, China. His research focuses in the synthesis and catalysis of nanocomposites. Tuan Anh Nguyen is a Senior Principal Research Scientist at the Institute for Tropical Technology, Vietnam Academy of Science and Technology, Hanoi, Vietnam. He received a BS in physics from Hanoi University in 1992, a BS in economics from Hanoi National Economics University in 1997, and a PhD in chemistry from the Paris Diderot University, France, in 2003. He was a Visiting Scientist at Seoul National University, South Korea, in 2004, and the University of Wollongong, Australia, in 2005. He then worked as a Postdoctoral Research Associate and Research Scientist at Montana State University, United States in 2006-09. In 2012 he was appointed as the Head of the Microanalysis Department at the Institute for Tropical Technology. His research areas of interest include smart sensors, smart networks, smart hospitals, smart cities, complexiverse, and digital twins. He has edited more than 74 books for Elsevier, 12 books for CRC Press, 1 book for Springer, 1 book for RSC, and 2 books for IGI Global. He is the Editor-in-Chief of Kenkyu Journal of Nanotechnology & Nanoscience.

• PART 1: CORROSION AND PROTECTION AT NANOSCALE1. Corrosion protection at nanoscale: An introduction2. Mathematical modelling and simulation of corrosion at nanoscale:3. Nanostructured metals and alloys with low melting point4. Nanocontainer loaded with pH indicator phenolphthalein for corrosion sensing application5. Methods for testing and measurement of metal corrosion at nanoscale6. Methods for fabrication of nanocoatingsPART 2: PROTECTION OF METAL USING NANOSTRUCTURED ALLOYS7. Corrosion resistance of nanostructured metals and alloys8. Nanostructured alloys: Preparation, characterization and anticorrosion property9. Iron based nanostructured alloys10. Nickel based bimetallic nanostructured alloys11. Current industrial application and future perspectivesPART 3: PROTECTION OF METAL USING NANOINHIBITORS12. Metal/metal oxide nanoparticles as corrosion inhibitors13. Corrosion inhibitor loaded smart nanocontainers14. pH‐responsive controlled release of corrosion inhibitor from nanocarriers (nanocapsules)15. Current industrial application and future perspectivesPART 4: PROTECTION OF METAL USING NANOCOATINGS16. Nanocoatings for anticorrosion:  An introduction17. Polymeric nanocomposite coatings18. Metallic nanocomposite coatings19. Ceramic nanocomposite coatings20. Current industrial application and future perspectivesPART 5: ELECTROCHEMICAL CATHODIC PROTECTION USING NANOGENERATORS21. (Numerical) Nanoscale simulation of cathodic protection22. Electrochemical cathodic protection powered by triboelectric nanogenerator23. Self-powered cathodic protection based on the hybrid nanogenerators (by simultaneously harvesting thermal and mechanical energies)24. Current industrial application and future perspectivesPART 6: CONCLUSIONS AND FUTURE PERSPECTIVES25. Current industrial scale up application26. Future scope