Haiping Du has more than 15-year experience on the area of modelling, dynamics and control of electrified vehicles. Dr Du received his PhD degree in mechanical design and theory from Shanghai Jiao Tong University, Shanghai, PR China, in 2002. Previously, Dr Du worked as Research Fellow in University of Technology, Sydney and as Post-Doctoral Research Associate in Imperial College London and the University of Hong Kong, respectively. Weihua Li received the B.E. and M.E. degrees in mechanical engineering from the University of Science and Technology of China, in 1992 and 1995, respectively, and the Ph.D. degree in mechanical engineering from the Nanyang Technological University, in 2001. He has been in the School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Wollongong, N.S.W., Australia, as an Academic Staff Member, since 2003. He has published more than 260 technical articles in refereed international journals and conferences. Dr. Li serves as an Associate Editor or an Editorial Board Member for nine international journals. He received the number of awards, including the JSPS Invitation Fellowship in 2014, the Endeavour Research Fellowship in 2011, and the Scientific Visits to China Program Awards. Prof. Li co-supervised the whole research project on Advanced Seat Suspension Control System Design for Heavy Duty Vehicles. Donghong Ning received the B.E. degree in agricultural mechanization and automation from the College of Mechanical and Electronic Engineering, North West Agriculture and Forestry University, Xianyang, China, in 2012. He obtained the Ph.D. degree from the School of Electrical, Computer and Telecommunications Engineering, University of Wollongong, Wollongong, N.S.W., Australia. He is currently working as an Associate Research Fellow at University of Wollongong. His research interests include seat suspension vibration control and multi degrees of freedom vibration control. Dr Ning did a relevant PhD research project and post-doctoral research work under the supervision of Prof. Du and Prof. Li. Shuaishuai Sun received the B.E. degree in mechanical engineering automation from the School of Mechanical, Electronic and Information Engineering, China University of Mining and Technology, Beijing, China, in 2011. He obtained the Ph.D. degree from the School of Mechanical, Material and Mechatronics Engineering, University of Wollongong, Wollongong, N.S.W., Australia. He is currently working as an Associate Research Fellow at University of Wollongong. His research interests include smart materials and structures, vibration control, and self-sensing MR devices. Dr Sun did a PhD research project and post-doctoral research work, which made research contributions on MR based semi-active vibration control under the supervision of Prof. Li and Prof. Du.

• 1. Introduction2. Controllable electromagnetic damper-based seat suspension3. Controllable magnetorheological fluid damper-based seat suspension4. Self-powered MR seat suspension5. Variable equivalent stiffness seat suspension6. Variable equivalent inertance seat suspension7. Single-DOF active seat suspension8. Multiple-DOF active seat suspension9. Active seat suspension control algorithm10. Hybrid active and semi-active seat suspension 11. Nonlinear stiffness seat suspensionAppendix A. Vibration profile generation for seat suspensionAppendix B. Simulation of seat suspension controlAppendix C. Experimental setupIndex

Haiping Du has more than 15-year experience on the area of modelling, dynamics and control of electrified vehicles. Dr Du received his PhD degree in mechanical design and theory from Shanghai Jiao Tong University, Shanghai, PR China, in 2002. Previously, Dr Du worked as Research Fellow in University of Technology, Sydney and as Post-Doctoral Research Associate in Imperial College London and the University of Hong Kong, respectively. Weihua Li received the B.E. and M.E. degrees in mechanical engineering from the University of Science and Technology of China, in 1992 and 1995, respectively, and the Ph.D. degree in mechanical engineering from the Nanyang Technological University, in 2001. He has been in the School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Wollongong, N.S.W., Australia, as an Academic Staff Member, since 2003. He has published more than 260 technical articles in refereed international journals and conferences. Dr. Li serves as an Associate Editor or an Editorial Board Member for nine international journals. He received the number of awards, including the JSPS Invitation Fellowship in 2014, the Endeavour Research Fellowship in 2011, and the Scientific Visits to China Program Awards. Prof. Li co-supervised the whole research project on Advanced Seat Suspension Control System Design for Heavy Duty Vehicles. Donghong Ning received the B.E. degree in agricultural mechanization and automation from the College of Mechanical and Electronic Engineering, North West Agriculture and Forestry University, Xianyang, China, in 2012. He obtained the Ph.D. degree from the School of Electrical, Computer and Telecommunications Engineering, University of Wollongong, Wollongong, N.S.W., Australia. He is currently working as an Associate Research Fellow at University of Wollongong. His research interests include seat suspension vibration control and multi degrees of freedom vibration control. Dr Ning did a relevant PhD research project and post-doctoral research work under the supervision of Prof. Du and Prof. Li. Shuaishuai Sun received the B.E. degree in mechanical engineering automation from the School of Mechanical, Electronic and Information Engineering, China University of Mining and Technology, Beijing, China, in 2011. He obtained the Ph.D. degree from the School of Mechanical, Material and Mechatronics Engineering, University of Wollongong, Wollongong, N.S.W., Australia. He is currently working as an Associate Research Fellow at University of Wollongong. His research interests include smart materials and structures, vibration control, and self-sensing MR devices. Dr Sun did a PhD research project and post-doctoral research work, which made research contributions on MR based semi-active vibration control under the supervision of Prof. Li and Prof. Du.

• 1. Introduction2. Controllable electromagnetic damper-based seat suspension3. Controllable magnetorheological fluid damper-based seat suspension4. Self-powered MR seat suspension5. Variable equivalent stiffness seat suspension6. Variable equivalent inertance seat suspension7. Single-DOF active seat suspension8. Multiple-DOF active seat suspension9. Active seat suspension control algorithm10. Hybrid active and semi-active seat suspension 11. Nonlinear stiffness seat suspensionAppendix A. Vibration profile generation for seat suspensionAppendix B. Simulation of seat suspension controlAppendix C. Experimental setupIndex

Haiping Du has more than 15-year experience on the area of modelling, dynamics and control of electrified vehicles. Dr Du received his PhD degree in mechanical design and theory from Shanghai Jiao Tong University, Shanghai, PR China, in 2002. Previously, Dr Du worked as Research Fellow in University of Technology, Sydney and as Post-Doctoral Research Associate in Imperial College London and the University of Hong Kong, respectively. Weihua Li received the B.E. and M.E. degrees in mechanical engineering from the University of Science and Technology of China, in 1992 and 1995, respectively, and the Ph.D. degree in mechanical engineering from the Nanyang Technological University, in 2001. He has been in the School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Wollongong, N.S.W., Australia, as an Academic Staff Member, since 2003. He has published more than 260 technical articles in refereed international journals and conferences. Dr. Li serves as an Associate Editor or an Editorial Board Member for nine international journals. He received the number of awards, including the JSPS Invitation Fellowship in 2014, the Endeavour Research Fellowship in 2011, and the Scientific Visits to China Program Awards. Prof. Li co-supervised the whole research project on Advanced Seat Suspension Control System Design for Heavy Duty Vehicles. Donghong Ning received the B.E. degree in agricultural mechanization and automation from the College of Mechanical and Electronic Engineering, North West Agriculture and Forestry University, Xianyang, China, in 2012. He obtained the Ph.D. degree from the School of Electrical, Computer and Telecommunications Engineering, University of Wollongong, Wollongong, N.S.W., Australia. He is currently working as an Associate Research Fellow at University of Wollongong. His research interests include seat suspension vibration control and multi degrees of freedom vibration control. Dr Ning did a relevant PhD research project and post-doctoral research work under the supervision of Prof. Du and Prof. Li. Shuaishuai Sun received the B.E. degree in mechanical engineering automation from the School of Mechanical, Electronic and Information Engineering, China University of Mining and Technology, Beijing, China, in 2011. He obtained the Ph.D. degree from the School of Mechanical, Material and Mechatronics Engineering, University of Wollongong, Wollongong, N.S.W., Australia. He is currently working as an Associate Research Fellow at University of Wollongong. His research interests include smart materials and structures, vibration control, and self-sensing MR devices. Dr Sun did a PhD research project and post-doctoral research work, which made research contributions on MR based semi-active vibration control under the supervision of Prof. Li and Prof. Du.

• 1. Introduction2. Controllable electromagnetic damper-based seat suspension3. Controllable magnetorheological fluid damper-based seat suspension4. Self-powered MR seat suspension5. Variable equivalent stiffness seat suspension6. Variable equivalent inertance seat suspension7. Single-DOF active seat suspension8. Multiple-DOF active seat suspension9. Active seat suspension control algorithm10. Hybrid active and semi-active seat suspension 11. Nonlinear stiffness seat suspensionAppendix A. Vibration profile generation for seat suspensionAppendix B. Simulation of seat suspension controlAppendix C. Experimental setupIndex