Dr. Harish Kumar Banga currently working as an Assistant Professor, Department of Fashion & Life Style Accessories Design, NIFT Mumbai and completed his Ph.D. in Production & Industrial Engineering. He has one year of industry experience and seven years of teaching as well as research experience. His areas of interest are Additive Manufacturing, CAD/CAM. Human Factor Engineering and Robotics. He has taught courses including CAD/CAM, Modern manufacturing system, Additive manufacturing Thermal Engineering, Industrial Engineering at undergraduate levels. He has more than Fifty-five research publications in National and International conferences and journals of repute. He is a Life Member of IIIE, HKSME, IAENG, PUNJ Robotics. He has participated and organized many workshops, seminars, and FDPs and delivered numerous expert lectures. He has published Seven book and Fifteen book chapter on Additive manufacturing area. He is certified Six Sigma Green Belt.Dr Rajesh Kumar is working as an Assistant Professor in Department of Mechanical Engineering, UIET, Panjab University, Chandigarh. He published more than fifty research papers in national and international journals. He did his graduation from Punjab Engineering College, Chandigarh in 1999. He did post-graduation and PhD from PEC university of Technology, Chandigarh, in 2004 and 2012 respectively. His areas of interest are Finite Element Analysis, Additive Manufacturing, CAD/CAM. and Robotics. He has more than 15 years of teaching and research experience. He has taught courses including Finite Element Analysis, Thermal Engineering, CAD/CAM at undergraduate levels. He has participated and organized many workshops, seminars, and FDPs and delivered numerous expert lecturesDr Parveen Kalra did his graduation in Mechanical engineering from PEC university of Technology, Chandigarh, in 1987 and post-graduation in Industrial Robotics from Memorial University ,Canada, in 1989, obtained his PhD in Mechanical engineering from Panjab University, Chandigarh in 1995. Presently, he is Professor in Department of Production & Industrial Engineering in Punjab Engineering College, Chandigarh. His area of specialization is Human Engineering, Industrial & Product Design, CAD/CAM and Robotics. He has more than 25 years of teaching and research experience. He has taught courses including Product Design & Development, Advance Robotics, CAD/CAM at postgraduate levels. He has published more than 75 research paper in international and national journals. He is member of ISTE. He established Centre of Excellence (Industrial & Product Design) by DST project in PEC Chandigarh.Dr Rajendra M. Belokar did his graduation in Production Engineering from Amravati University, Amravati, in 1987. He did post-graduation and PhD from Panjab University, Chandigarh, in 1999 and 2010 respectively. Presently, he is Professor in Department of Production & Industrial Engineering, Punjab Engineering College, Chandigarh. He published more than 65 research papers in national and international journals. He has more than 25 years of teaching and research experience. He has taught courses including SCM, TQM, Industrial Metrology and Technology Management at under graduate and postgraduate levels. He published three books and two book chapters with international publishers. He is Sr. Member SME (USA), M.I.E, C. eng (I), LM-IS TE, Member-INVEST, and Member APICS (USA). He established Centre of Excellence collaboration with SIEMENS in PEC Chandigarh. He is certified Six Sigma Black , Green & Black Belt.

Select Guide Rating

• Chapter 1Introduction and Need of Additive Manufacturing in Medical IndustryPrachi Khamkar, Atul KadamChapter 2 Insights of 3D Printing Technology with its types: A ReviewRanbir Singh Rooprai, Jaswinder SinghChapter 33D Printing Technology: An OverviewRaman Kumar, Harpreet Kaur Channi Chapter 4Use of additive manufacturing in surgical tool/guides for dental implantsDr. Himanshu Deswal, Dr. Anoop Kapoor, Dr. Komal Sehgal, Dr.Vishakha GroverChapter 5Materials for 3D Printing in Medicine: Metals, Polymers, Ceramics, HydrogelsKamal Kishore, Roopak Varshney, Param Singh and Manoj Kumar SinhaChapter 6Materials for 3D Printing in Medicine: Metals, Polymers, Ceramics, HydrogelsKritik SaxenaChapter 7Materials for 3D Printing in Medicine: Metals, Polymers, Ceramics, and HydrogelsSümeyra Ayana, Fatih Çiftci, Mustafa Sengor, Muhammet Emin Çam, Nazmi Ekren, Oğuzhan Gündüz, Cem Bülent ÜstündağChapter 8Recent Advancements and Developments in the Field of Rapid Prototyping for Clinical ApplicationsNavdeep Singh and Parnika ShrivastavaChapter 9Surgery planning and tool selection using 3D printing: Application to NeurosurgeryShagun Sharma, Chirag Ahuja, Parveen Kalra, Manarshhjot Singh, Ashish Aggarwal, Jagjit Singh RandhawaChapter 10 Amalgamating Additive Manufacturing and Electro spinning for Fabrication of 3D ScaffoldsParneet Kaur Deol, Amoljit Singh Gill, Mandeep Singh, Indu Pal KaurChapter 11Usage of Additive Manufacturing in Customized Bone Tissue Engineering ScaffoldDr. Shipra GuptaChapter 12Application of Additive manufacturing (AM) Technology in Medical Field: A Boon for the 21st CenturySangita Agarwal, Soumendra Darbar and Srimoyee SahaChapter 13Additive Manufacturing Market Prognosis of Medical Devices in the International ArenaSoumendraDarbar,Srimoyee Saha, and Sangita AgarwalChapter 14Overview of 3D Printing Technology: Historical, Types, Applications, and MaterialsRakesh Kumar and Santosh KumarChapter 15Market demand of Additive Manufactured biomedical productParth K. Patel Chapter 16Using Additive Manufacturing Techniques For Product Design And Development : Case Study on BiomaterialsNajla Bentrad and Asma Hamida-Ferhat Chapter 17Applications of Artificial intelligence and machine learning using additive manufacturing techniques Raj Kumar, Harish Kumar Banga, Parveen Kalra, R.M.Belokar, Rajesh Kumar, Rajender Kumar, Ganesh S Yadav

Dr. Harish Kumar Banga currently working as an Assistant Professor, Department of Fashion & Life Style Accessories Design, NIFT Mumbai and completed his Ph.D. in Production & Industrial Engineering. He has one year of industry experience and seven years of teaching as well as research experience. His areas of interest are Additive Manufacturing, CAD/CAM. Human Factor Engineering and Robotics. He has taught courses including CAD/CAM, Modern manufacturing system, Additive manufacturing Thermal Engineering, Industrial Engineering at undergraduate levels. He has more than Fifty-five research publications in National and International conferences and journals of repute. He is a Life Member of IIIE, HKSME, IAENG, PUNJ Robotics. He has participated and organized many workshops, seminars, and FDPs and delivered numerous expert lectures. He has published Seven book and Fifteen book chapter on Additive manufacturing area. He is certified Six Sigma Green Belt.Dr Rajesh Kumar is working as an Assistant Professor in Department of Mechanical Engineering, UIET, Panjab University, Chandigarh. He published more than fifty research papers in national and international journals. He did his graduation from Punjab Engineering College, Chandigarh in 1999. He did post-graduation and PhD from PEC university of Technology, Chandigarh, in 2004 and 2012 respectively. His areas of interest are Finite Element Analysis, Additive Manufacturing, CAD/CAM. and Robotics. He has more than 15 years of teaching and research experience. He has taught courses including Finite Element Analysis, Thermal Engineering, CAD/CAM at undergraduate levels. He has participated and organized many workshops, seminars, and FDPs and delivered numerous expert lecturesDr Parveen Kalra did his graduation in Mechanical engineering from PEC university of Technology, Chandigarh, in 1987 and post-graduation in Industrial Robotics from Memorial University ,Canada, in 1989, obtained his PhD in Mechanical engineering from Panjab University, Chandigarh in 1995. Presently, he is Professor in Department of Production & Industrial Engineering in Punjab Engineering College, Chandigarh. His area of specialization is Human Engineering, Industrial & Product Design, CAD/CAM and Robotics. He has more than 25 years of teaching and research experience. He has taught courses including Product Design & Development, Advance Robotics, CAD/CAM at postgraduate levels. He has published more than 75 research paper in international and national journals. He is member of ISTE. He established Centre of Excellence (Industrial & Product Design) by DST project in PEC Chandigarh.Dr Rajendra M. Belokar did his graduation in Production Engineering from Amravati University, Amravati, in 1987. He did post-graduation and PhD from Panjab University, Chandigarh, in 1999 and 2010 respectively. Presently, he is Professor in Department of Production & Industrial Engineering, Punjab Engineering College, Chandigarh. He published more than 65 research papers in national and international journals. He has more than 25 years of teaching and research experience. He has taught courses including SCM, TQM, Industrial Metrology and Technology Management at under graduate and postgraduate levels. He published three books and two book chapters with international publishers. He is Sr. Member SME (USA), M.I.E, C. eng (I), LM-IS TE, Member-INVEST, and Member APICS (USA). He established Centre of Excellence collaboration with SIEMENS in PEC Chandigarh. He is certified Six Sigma Black , Green & Black Belt.

Select Guide Rating

• Chapter 1Introduction and Need of Additive Manufacturing in Medical IndustryPrachi Khamkar, Atul KadamChapter 2 Insights of 3D Printing Technology with its types: A ReviewRanbir Singh Rooprai, Jaswinder SinghChapter 33D Printing Technology: An OverviewRaman Kumar, Harpreet Kaur Channi Chapter 4Use of additive manufacturing in surgical tool/guides for dental implantsDr. Himanshu Deswal, Dr. Anoop Kapoor, Dr. Komal Sehgal, Dr.Vishakha GroverChapter 5Materials for 3D Printing in Medicine: Metals, Polymers, Ceramics, HydrogelsKamal Kishore, Roopak Varshney, Param Singh and Manoj Kumar SinhaChapter 6Materials for 3D Printing in Medicine: Metals, Polymers, Ceramics, HydrogelsKritik SaxenaChapter 7Materials for 3D Printing in Medicine: Metals, Polymers, Ceramics, and HydrogelsSümeyra Ayana, Fatih Çiftci, Mustafa Sengor, Muhammet Emin Çam, Nazmi Ekren, Oğuzhan Gündüz, Cem Bülent ÜstündağChapter 8Recent Advancements and Developments in the Field of Rapid Prototyping for Clinical ApplicationsNavdeep Singh and Parnika ShrivastavaChapter 9Surgery planning and tool selection using 3D printing: Application to NeurosurgeryShagun Sharma, Chirag Ahuja, Parveen Kalra, Manarshhjot Singh, Ashish Aggarwal, Jagjit Singh RandhawaChapter 10 Amalgamating Additive Manufacturing and Electro spinning for Fabrication of 3D ScaffoldsParneet Kaur Deol, Amoljit Singh Gill, Mandeep Singh, Indu Pal KaurChapter 11Usage of Additive Manufacturing in Customized Bone Tissue Engineering ScaffoldDr. Shipra GuptaChapter 12Application of Additive manufacturing (AM) Technology in Medical Field: A Boon for the 21st CenturySangita Agarwal, Soumendra Darbar and Srimoyee SahaChapter 13Additive Manufacturing Market Prognosis of Medical Devices in the International ArenaSoumendraDarbar,Srimoyee Saha, and Sangita AgarwalChapter 14Overview of 3D Printing Technology: Historical, Types, Applications, and MaterialsRakesh Kumar and Santosh KumarChapter 15Market demand of Additive Manufactured biomedical productParth K. Patel Chapter 16Using Additive Manufacturing Techniques For Product Design And Development : Case Study on BiomaterialsNajla Bentrad and Asma Hamida-Ferhat Chapter 17Applications of Artificial intelligence and machine learning using additive manufacturing techniques Raj Kumar, Harish Kumar Banga, Parveen Kalra, R.M.Belokar, Rajesh Kumar, Rajender Kumar, Ganesh S Yadav

Dr. Harish Kumar Banga currently working as an Assistant Professor, Department of Fashion & Life Style Accessories Design, NIFT Mumbai and completed his Ph.D. in Production & Industrial Engineering. He has one year of industry experience and seven years of teaching as well as research experience. His areas of interest are Additive Manufacturing, CAD/CAM. Human Factor Engineering and Robotics. He has taught courses including CAD/CAM, Modern manufacturing system, Additive manufacturing Thermal Engineering, Industrial Engineering at undergraduate levels. He has more than Fifty-five research publications in National and International conferences and journals of repute. He is a Life Member of IIIE, HKSME, IAENG, PUNJ Robotics. He has participated and organized many workshops, seminars, and FDPs and delivered numerous expert lectures. He has published Seven book and Fifteen book chapter on Additive manufacturing area. He is certified Six Sigma Green Belt.Dr Rajesh Kumar is working as an Assistant Professor in Department of Mechanical Engineering, UIET, Panjab University, Chandigarh. He published more than fifty research papers in national and international journals. He did his graduation from Punjab Engineering College, Chandigarh in 1999. He did post-graduation and PhD from PEC university of Technology, Chandigarh, in 2004 and 2012 respectively. His areas of interest are Finite Element Analysis, Additive Manufacturing, CAD/CAM. and Robotics. He has more than 15 years of teaching and research experience. He has taught courses including Finite Element Analysis, Thermal Engineering, CAD/CAM at undergraduate levels. He has participated and organized many workshops, seminars, and FDPs and delivered numerous expert lecturesDr Parveen Kalra did his graduation in Mechanical engineering from PEC university of Technology, Chandigarh, in 1987 and post-graduation in Industrial Robotics from Memorial University ,Canada, in 1989, obtained his PhD in Mechanical engineering from Panjab University, Chandigarh in 1995. Presently, he is Professor in Department of Production & Industrial Engineering in Punjab Engineering College, Chandigarh. His area of specialization is Human Engineering, Industrial & Product Design, CAD/CAM and Robotics. He has more than 25 years of teaching and research experience. He has taught courses including Product Design & Development, Advance Robotics, CAD/CAM at postgraduate levels. He has published more than 75 research paper in international and national journals. He is member of ISTE. He established Centre of Excellence (Industrial & Product Design) by DST project in PEC Chandigarh.Dr Rajendra M. Belokar did his graduation in Production Engineering from Amravati University, Amravati, in 1987. He did post-graduation and PhD from Panjab University, Chandigarh, in 1999 and 2010 respectively. Presently, he is Professor in Department of Production & Industrial Engineering, Punjab Engineering College, Chandigarh. He published more than 65 research papers in national and international journals. He has more than 25 years of teaching and research experience. He has taught courses including SCM, TQM, Industrial Metrology and Technology Management at under graduate and postgraduate levels. He published three books and two book chapters with international publishers. He is Sr. Member SME (USA), M.I.E, C. eng (I), LM-IS TE, Member-INVEST, and Member APICS (USA). He established Centre of Excellence collaboration with SIEMENS in PEC Chandigarh. He is certified Six Sigma Black , Green & Black Belt.

Select Guide Rating

• Chapter 1Introduction and Need of Additive Manufacturing in Medical IndustryPrachi Khamkar, Atul KadamChapter 2 Insights of 3D Printing Technology with its types: A ReviewRanbir Singh Rooprai, Jaswinder SinghChapter 33D Printing Technology: An OverviewRaman Kumar, Harpreet Kaur Channi Chapter 4Use of additive manufacturing in surgical tool/guides for dental implantsDr. Himanshu Deswal, Dr. Anoop Kapoor, Dr. Komal Sehgal, Dr.Vishakha GroverChapter 5Materials for 3D Printing in Medicine: Metals, Polymers, Ceramics, HydrogelsKamal Kishore, Roopak Varshney, Param Singh and Manoj Kumar SinhaChapter 6Materials for 3D Printing in Medicine: Metals, Polymers, Ceramics, HydrogelsKritik SaxenaChapter 7Materials for 3D Printing in Medicine: Metals, Polymers, Ceramics, and HydrogelsSümeyra Ayana, Fatih Çiftci, Mustafa Sengor, Muhammet Emin Çam, Nazmi Ekren, Oğuzhan Gündüz, Cem Bülent ÜstündağChapter 8Recent Advancements and Developments in the Field of Rapid Prototyping for Clinical ApplicationsNavdeep Singh and Parnika ShrivastavaChapter 9Surgery planning and tool selection using 3D printing: Application to NeurosurgeryShagun Sharma, Chirag Ahuja, Parveen Kalra, Manarshhjot Singh, Ashish Aggarwal, Jagjit Singh RandhawaChapter 10 Amalgamating Additive Manufacturing and Electro spinning for Fabrication of 3D ScaffoldsParneet Kaur Deol, Amoljit Singh Gill, Mandeep Singh, Indu Pal KaurChapter 11Usage of Additive Manufacturing in Customized Bone Tissue Engineering ScaffoldDr. Shipra GuptaChapter 12Application of Additive manufacturing (AM) Technology in Medical Field: A Boon for the 21st CenturySangita Agarwal, Soumendra Darbar and Srimoyee SahaChapter 13Additive Manufacturing Market Prognosis of Medical Devices in the International ArenaSoumendraDarbar,Srimoyee Saha, and Sangita AgarwalChapter 14Overview of 3D Printing Technology: Historical, Types, Applications, and MaterialsRakesh Kumar and Santosh KumarChapter 15Market demand of Additive Manufactured biomedical productParth K. Patel Chapter 16Using Additive Manufacturing Techniques For Product Design And Development : Case Study on BiomaterialsNajla Bentrad and Asma Hamida-Ferhat Chapter 17Applications of Artificial intelligence and machine learning using additive manufacturing techniques Raj Kumar, Harish Kumar Banga, Parveen Kalra, R.M.Belokar, Rajesh Kumar, Rajender Kumar, Ganesh S Yadav