Yang Shi received the Ph.D. degree in electrical and computer engineering from the University of Alberta, Edmonton, AB, Canada, in 2005. From 2005 to 2009, he was an Assistant Professor with the Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, SK, Canada. He is currently a Professor with the Department of Mechanical Engineering, University of Victoria, Victoria, BC, Canada. His current research interests include networked and distributed systems, system identification, model predictive control, mechatronics, and energy system applications.Dr. Shi received the University of Saskatchewan Student Union Teaching Excellence Award in 2007, the Faculty of Engineering Teaching Excellence Award at the University of Victoria in 2012. He received the JSPS Invitation Fellowship (short-term) in 2013, the 2015 Craigdarroch Silver Medal for Excellence in Research of the University of Victoria, and   Thomson Reuters Highly Cited Researcher in Engineering in 2014 and 2015. He serves as Associate Editor for IEEE Trans. Control Systems Technology, IEEE/ASME Trans. Mechatronics, IEEE Trans. Fuzzy Systems, IET Control Theory and Applications, ASME Journal of Dynamic Systems, Measurement, and Control. He is currently a senior member of IEEE, a member of ASME, and a registered Professional Engineer in British Columbia, Canada.Huiping Li received his B.Sc. and M.Sc. degrees in Mechanical Engineering and Automatic Control from Northwestern Polytechnical University, Xi’an, China, in 2006 and 2009, respectively, his Ph.D. degree in Mechanical Engineering from University of Victoria, BC, Canada, in 2013. From May to October 2013, he was a Postdoctoral Research Fellow with the Department of Mechanical Engineering, University of Victoria, BC. Since November 2013, he has been with the School of Marine Science and Technology, Northwestern Polytechnical University, Xi’an, where he is currently an Associate Professor. His research interests include networked control systems, multi-agent systems, model predictive control and cooperative control of underwater vehicles. He is an active reviewer for more than 10 international journals and conferences.

“The monograph offers both practical solutions and rigorous theoretical analysis with correct design conditions. The book presents the solutions step-by-step graduating from the state feedback control problems of nonlinear networked systems to output control problems. … Readers are expected to be familiar with basic RHC as a necessary background. This book would be useful to advanced graduate students, academic researchers and applied mathematicians interested in this challenging area.” (Lubomír Bakule, zbMath 1415.93004, 2019)

• Introduction and Overview.- RHC of Networked Nonlinear Systems with Two-Channel Packet Dropouts.- Min-Max RHC of Nonlinear NCSs with Delays and Packet Dropouts.- Output Feedback RHC of NCSs with Intermittent Measurements.- Robust Distributed RHC of Constrained Nonlinear Systems.- Distributed RHC of Nonlinear Systems with Communication Delays.- Distributed RHC of Nonlinear Systems: Handling Delays and Disturbances.- Event-Triggered Robust RHC of Continuous-Time Nonlinear Systems.

Yang Shi received the Ph.D. degree in electrical and computer engineering from the University of Alberta, Edmonton, AB, Canada, in 2005. From 2005 to 2009, he was an Assistant Professor with the Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, SK, Canada. He is currently a Professor with the Department of Mechanical Engineering, University of Victoria, Victoria, BC, Canada. His current research interests include networked and distributed systems, system identification, model predictive control, mechatronics, and energy system applications.Dr. Shi received the University of Saskatchewan Student Union Teaching Excellence Award in 2007, the Faculty of Engineering Teaching Excellence Award at the University of Victoria in 2012. He received the JSPS Invitation Fellowship (short-term) in 2013, the 2015 Craigdarroch Silver Medal for Excellence in Research of the University of Victoria, and   Thomson Reuters Highly Cited Researcher in Engineering in 2014 and 2015. He serves as Associate Editor for IEEE Trans. Control Systems Technology, IEEE/ASME Trans. Mechatronics, IEEE Trans. Fuzzy Systems, IET Control Theory and Applications, ASME Journal of Dynamic Systems, Measurement, and Control. He is currently a senior member of IEEE, a member of ASME, and a registered Professional Engineer in British Columbia, Canada.Huiping Li received his B.Sc. and M.Sc. degrees in Mechanical Engineering and Automatic Control from Northwestern Polytechnical University, Xi’an, China, in 2006 and 2009, respectively, his Ph.D. degree in Mechanical Engineering from University of Victoria, BC, Canada, in 2013. From May to October 2013, he was a Postdoctoral Research Fellow with the Department of Mechanical Engineering, University of Victoria, BC. Since November 2013, he has been with the School of Marine Science and Technology, Northwestern Polytechnical University, Xi’an, where he is currently an Associate Professor. His research interests include networked control systems, multi-agent systems, model predictive control and cooperative control of underwater vehicles. He is an active reviewer for more than 10 international journals and conferences.

“The monograph offers both practical solutions and rigorous theoretical analysis with correct design conditions. The book presents the solutions step-by-step graduating from the state feedback control problems of nonlinear networked systems to output control problems. … Readers are expected to be familiar with basic RHC as a necessary background. This book would be useful to advanced graduate students, academic researchers and applied mathematicians interested in this challenging area.” (Lubomír Bakule, zbMath 1415.93004, 2019)

• Introduction and Overview.- RHC of Networked Nonlinear Systems with Two-Channel Packet Dropouts.- Min-Max RHC of Nonlinear NCSs with Delays and Packet Dropouts.- Output Feedback RHC of NCSs with Intermittent Measurements.- Robust Distributed RHC of Constrained Nonlinear Systems.- Distributed RHC of Nonlinear Systems with Communication Delays.- Distributed RHC of Nonlinear Systems: Handling Delays and Disturbances.- Event-Triggered Robust RHC of Continuous-Time Nonlinear Systems.

Yang Shi received the Ph.D. degree in electrical and computer engineering from the University of Alberta, Edmonton, AB, Canada, in 2005. From 2005 to 2009, he was an Assistant Professor with the Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, SK, Canada. He is currently a Professor with the Department of Mechanical Engineering, University of Victoria, Victoria, BC, Canada. His current research interests include networked and distributed systems, system identification, model predictive control, mechatronics, and energy system applications.Dr. Shi received the University of Saskatchewan Student Union Teaching Excellence Award in 2007, the Faculty of Engineering Teaching Excellence Award at the University of Victoria in 2012. He received the JSPS Invitation Fellowship (short-term) in 2013, the 2015 Craigdarroch Silver Medal for Excellence in Research of the University of Victoria, and   Thomson Reuters Highly Cited Researcher in Engineering in 2014 and 2015. He serves as Associate Editor for IEEE Trans. Control Systems Technology, IEEE/ASME Trans. Mechatronics, IEEE Trans. Fuzzy Systems, IET Control Theory and Applications, ASME Journal of Dynamic Systems, Measurement, and Control. He is currently a senior member of IEEE, a member of ASME, and a registered Professional Engineer in British Columbia, Canada.Huiping Li received his B.Sc. and M.Sc. degrees in Mechanical Engineering and Automatic Control from Northwestern Polytechnical University, Xi’an, China, in 2006 and 2009, respectively, his Ph.D. degree in Mechanical Engineering from University of Victoria, BC, Canada, in 2013. From May to October 2013, he was a Postdoctoral Research Fellow with the Department of Mechanical Engineering, University of Victoria, BC. Since November 2013, he has been with the School of Marine Science and Technology, Northwestern Polytechnical University, Xi’an, where he is currently an Associate Professor. His research interests include networked control systems, multi-agent systems, model predictive control and cooperative control of underwater vehicles. He is an active reviewer for more than 10 international journals and conferences.

“The monograph offers both practical solutions and rigorous theoretical analysis with correct design conditions. The book presents the solutions step-by-step graduating from the state feedback control problems of nonlinear networked systems to output control problems. … Readers are expected to be familiar with basic RHC as a necessary background. This book would be useful to advanced graduate students, academic researchers and applied mathematicians interested in this challenging area.” (Lubomír Bakule, zbMath 1415.93004, 2019)

• Introduction and Overview.- RHC of Networked Nonlinear Systems with Two-Channel Packet Dropouts.- Min-Max RHC of Nonlinear NCSs with Delays and Packet Dropouts.- Output Feedback RHC of NCSs with Intermittent Measurements.- Robust Distributed RHC of Constrained Nonlinear Systems.- Distributed RHC of Nonlinear Systems with Communication Delays.- Distributed RHC of Nonlinear Systems: Handling Delays and Disturbances.- Event-Triggered Robust RHC of Continuous-Time Nonlinear Systems.