Alexander Barkalov – författare

This book is devoted to the logic synthesis of field programmable gate array (FPGA)-based circuits of Mealy finite state machines (FSM). Three new methods of state assignment are proposed, which allows obtaining FSM circuits required minimum amount of internal chip resources.Logic Synthesis for FPGA-Based Mealy Finite State Machines: Structural Decomposition in Logic Design contains several original synthesis and optimization methods based on the structural decomposition of FPGA-based FSM circuits developed by the authors. To optimize FSM circuits, the authors introduce the use of three methods of state assignment: twofold, extended, and composite. These methods allow for the creation of two- or three-level architectures of FSM circuits. The authors also demonstrate how the proposed methods, FSM architectures and synthesis methods can replace known solutions based on either functional decomposition or classical methods of structural decomposition. The authors also show how these architectures have regular systems of interconnections and demonstrate positive features compared to methods based on functional decomposition, including producing circuits with fewer elements that are faster and consume less power than their counterparts. The book includes experimental results proving the efficiency of the proposed solutions and compares the numbers in Look-up Tables (LUTs), showing the performance (maximum operating frequency) and power consumption for various methods of state assignment.The audience for this book is students, researchers, and engineers specializing in computer science/ engineering, electronics, and telecommunications. It will be especially useful for engineers working within the scope of algorithms, hardware-based software accelerators and control units, and systems based on the use of FPGAs.

This book is devoted to the logic synthesis of field programmable gate array (FPGA)-based circuits of Mealy finite state machines (FSM). Three new methods of state assignment are proposed, which allows obtaining FSM circuits required minimum amount of internal chip resources.Logic Synthesis for FPGA-Based Mealy Finite State Machines: Structural Decomposition in Logic Design contains several original synthesis and optimization methods based on the structural decomposition of FPGA-based FSM circuits developed by the authors. To optimize FSM circuits, the authors introduce the use of three methods of state assignment: twofold, extended, and composite. These methods allow for the creation of two- or three-level architectures of FSM circuits. The authors also demonstrate how the proposed methods, FSM architectures and synthesis methods can replace known solutions based on either functional decomposition or classical methods of structural decomposition. The authors also show how these architectures have regular systems of interconnections and demonstrate positive features compared to methods based on functional decomposition, including producing circuits with fewer elements that are faster and consume less power than their counterparts. The book includes experimental results proving the efficiency of the proposed solutions and compares the numbers in Look-up Tables (LUTs), showing the performance (maximum operating frequency) and power consumption for various methods of state assignment.The audience for this book is students, researchers, and engineers specializing in computer science/ engineering, electronics, and telecommunications. It will be especially useful for engineers working within the scope of algorithms, hardware-based software accelerators and control units, and systems based on the use of FPGAs.

This book is devoted to logic synthesis of FPGA-based circuits of counter-based control units. It focuses on counter-based control units and finite state machines (FSMs). It introduces new architectures for compositional microprogram control units (CMCUs) and FSMs that optimize hardware resources, performance, and power consumption.Logic Synthesis for Multi-Core Counter-Based Control Units: Structural Decomposition in Logic Design offers a groundbreaking approach to designing FPGA-based control units by introducing methods that optimize hardware efficiency, reduce power consumption, and improve performance. It highlights the advantages of structural decomposition over traditional functional decomposition, enabling the creation of circuits with fewer logic levels and more regular interconnections. Readers will benefit from detailed explanations of state assignment methods, such as twofold, extended, and composite, which are adapted to the unique requirements of counter-based control units. Additionally, the book explores the transition from single-core to multi-core architectures, demonstrating how this shift enhances the quality and efficiency of control unit circuits. With numerous practical examples and step-by-step synthesis methods, this book equips readers with the tools to design cutting-edge control units that outperform conventional solutions.This book is tailored for undergraduate and postgraduate students, researchers, and industry professionals specializing in computer science, electronics, and telecommunications. It is particularly relevant for those studying or working in areas such as reconfigurable systems, digital systems, computer architecture, embedded systems, and computer-aided design.

This book is devoted to embedded systems (ESs), which can now be found in practically all fields of human activity. Embedded systems are essentially a special class of computing systems designed for monitoring and controlling objects of the physical world. The book begins by discussing the distinctive features of ESs, above all their cybernetic-physical character, and how they can be designed to deliver the required performance with a minimum amount of hardware. In turn, it presents a range of design methodologies. Considerable attention is paid to the hardware implementation of computational algorithms. It is shown that different parts of complex ESs could be implemented using models of finite state machines (FSMs). Also, field-programmable gate arrays (FPGAs) are very often used to implement different hardware accelerators in ESs. The book pays considerable attention to design methods for FPGA-based FSMs, before the closing section turns to programmable logic controllers widely used in industry. This book will be interesting and useful for students and postgraduates in the area of Computer Science, as well as for designers of embedded systems. In addition, it offers a good point of departure for creating embedded systems for various spheres of human activity.

This book is devoted to embedded systems (ESs), which can now be found in practically all fields of human activity. Embedded systems are essentially a special class of computing systems designed for monitoring and controlling objects of the physical world. The book begins by discussing the distinctive features of ESs, above all their cybernetic-physical character, and how they can be designed to deliver the required performance with a minimum amount of hardware. In turn, it presents a range of design methodologies. Considerable attention is paid to the hardware implementation of computational algorithms. It is shown that different parts of complex ESs could be implemented using models of finite state machines (FSMs). Also, field-programmable gate arrays (FPGAs) are very often used to implement different hardware accelerators in ESs. The book pays considerable attention to design methods for FPGA-based FSMs, before the closing section turns to programmable logic controllers widely used in industry. This book will be interesting and useful for students and postgraduates in the area of Computer Science, as well as for designers of embedded systems. In addition, it offers a good point of departure for creating embedded systems for various spheres of human activity.

This book focuses on control units, which are a vital part of modern digital systems, and responsible for the efficiency of controlled systems. The model of a finite state machine (FSM) is often used to represent the behavior of a control unit. As a rule, control units have irregular structures that make it impossible to design their logic circuits using the standard library cells. Design methods depend strongly on such factors as the FSM used, specific features of the logic elements implemented in the FSM logic circuit, and the characteristics of the control algorithm to be interpreted.This book discusses Moore and Mealy FSMs implemented with FPGA chips, including look-up table elements (LUT) and embedded memory blocks (EMB). It is crucial to minimize the number of LUTs and EMBs in an FSM logic circuit, as well as to make the interconnections between the logic elements more regular, and various methods of structural decompositions can be used to solve this problem. These methods are reduced to the presentation of an FSM circuit as a composition of different logic blocks, the majority of which implement systems of intermediate logic functions different (and much simpler) than input memory functions and FSM output functions. The structural decomposition results in multilevel FSM circuits having fewer logic elements than equivalent single-level circuits. The book describes well-known methods of structural decomposition and proposes new ones, examining their impact on the final amount of hardware in an FSM circuit. It is of interest to students and postgraduates in the area of Computer Science, as well as experts involved in designing digital systems with complex control units. The proposed models and design methods open new possibilities for creating logic circuits of control units with an optimal amount of hardware and regular interconnections.

This book focuses on control units, which are a vital part of modern digital systems, and responsible for the efficiency of controlled systems. The model of a finite state machine (FSM) is often used to represent the behavior of a control unit. As a rule, control units have irregular structures that make it impossible to design their logic circuits using the standard library cells. Design methods depend strongly on such factors as the FSM used, specific features of the logic elements implemented in the FSM logic circuit, and the characteristics of the control algorithm to be interpreted.This book discusses Moore and Mealy FSMs implemented with FPGA chips, including look-up table elements (LUT) and embedded memory blocks (EMB). It is crucial to minimize the number of LUTs and EMBs in an FSM logic circuit, as well as to make the interconnections between the logic elements more regular, and various methods of structural decompositions can be used to solve this problem. These methods are reduced to the presentation of an FSM circuit as a composition of different logic blocks, the majority of which implement systems of intermediate logic functions different (and much simpler) than input memory functions and FSM output functions. The structural decomposition results in multilevel FSM circuits having fewer logic elements than equivalent single-level circuits. The book describes well-known methods of structural decomposition and proposes new ones, examining their impact on the final amount of hardware in an FSM circuit. It is of interest to students and postgraduates in the area of Computer Science, as well as experts involved in designing digital systems with complex control units. The proposed models and design methods open new possibilities for creating logic circuits of control units with an optimal amount of hardware and regular interconnections.

The book is devoted to design and optimization of control units represented by combined finite state machines (CFSMs). To optimize the circuits of CFSMs, we propose to use optimization methods targeting both Mealy and Moore FSMs.

The book is devoted to design and optimization of control units represented by combined finite state machines (CFSMs). To optimize the circuits of CFSMs, we propose to use optimization methods targeting both Mealy and Moore FSMs.

The book is composed of two parts. The first part introduces the concepts of the design of digital systems using contemporary field-programmable gate arrays (FPGAs). Various design techniques are discussed and illustrated by examples. The operation and effectiveness of these techniques is demonstrated through experiments that use relatively cheap prototyping boards that are widely available. The book begins with easily understandable introductory sections, continues with commonly used digital circuits, and then gradually extends to more advanced topics. The advanced topics include novel techniques where parallelism is applied extensively. These techniques involve not only core reconfigurable logical elements, but also use embedded blocks such as memories and digital signal processing slices and interactions with general-purpose and application-specific computing systems. Fully synthesizable specifications are provided in a hardware-description language (VHDL) and are ready to be tested and incorporated in engineering designs. A number of practical applications are discussed from areas such as data processing and vector-based computations (e.g. Hamming weight counters/comparators). The second part of the book covers the more theoretical aspects of finite state machine synthesis with the main objective of reducing basic FPGA resources, minimizing delays and achieving greater optimization of circuits and systems.

This book discusses control units represented by the model of a finite state machine (FSM). It contains various original methods and takes into account the peculiarities of field-programmable gate arrays (FPGA) chips and a FSM model. It shows that one of the peculiarities of FPGA chips is the existence of embedded memory blocks (EMB). The book is devoted to the solution of problems of logic synthesis and reduction of hardware amount in control units. The book will be interesting and useful for researchers and PhD students in the area of Electrical Engineering and Computer Science, as well as for designers of modern digital systems.

This book discusses control units represented by the model of a finite state machine (FSM). It contains various original methods and takes into account the peculiarities of field-programmable gate arrays (FPGA) chips and a FSM model.

The book is composed of two parts. The first part introduces the concepts of the design of digital systems using contemporary field-programmable gate arrays (FPGAs). Various design techniques are discussed and illustrated by examples. The operation and effectiveness of these techniques is demonstrated through experiments that use relatively cheap prototyping boards that are widely available. The book begins with easily understandable introductory sections, continues with commonly used digital circuits, and then gradually extends to more advanced topics. The advanced topics include novel techniques where parallelism is applied extensively. These techniques involve not only core reconfigurable logical elements, but also use embedded blocks such as memories and digital signal processing slices and interactions with general-purpose and application-specific computing systems. Fully synthesizable specifications are provided in a hardware-description language (VHDL) and are ready to be tested and incorporated in engineering designs. A number of practical applications are discussed from areas such as data processing and vector-based computations (e.g. Hamming weight counters/comparators). The second part of the book covers the more theoretical aspects of finite state machine synthesis with the main objective of reducing basic FPGA resources, minimizing delays and achieving greater optimization of circuits and systems.

This book discusses Moore finite state machines (FSMs) implemented with field programmable gate arrays (FPGAs) including look-up table (LUT) elements and embedded memory blocks (EMBs). To minimize the number of LUTs in FSM logic circuits, the authors propose replacing a state register with a state counter. They also put forward an approach allowing linear chains of states to be created, which simplifies the system of input memory functions and, therefore, decreases the number of LUTs in the resulting FSM circuit. The authors combine this approach with using EMBs to implement the system of output functions (microoperations). This allows a significant decrease in the number of LUTs, as well as eliminating a lot of interconnections in the FSM logic circuit. As a rule, it also reduces the area occupied by the circuit and diminishes the resulting power dissipation.This book is an interesting and valuable resource for students and postgraduates in the area of computer science, as well as for designers of digital systems that included complex control units

This book discusses Moore finite state machines (FSMs) implemented with field programmable gate arrays (FPGAs) including look-up table (LUT) elements and embedded memory blocks (EMBs).

One of the very important parts of any digital system is the control unit, coordin- ing interplay of other system blocks. As a rule, control units have irregular str- ture, which makes process of their logic circuits design very sophisticated. In case of complex logic controllers, the problem of system design is reduced practically to the design of control units. Actually, we observe a real technical boom connected with achievements in semiconductor technology. One of these is the development of integrated circuit known as the "systems-on-a-programmable- chip" (SoPC), where the number of elements approaches one billion. Because of the extreme complexity of microchips, it is very important to develop effective design methods oriented on particular properties of logical elements. Solution of this problem permits impr- ing functional capabilities of the target digital system inside single SoPC chip. As majority of researches point out, design methods used in case of industrial packages are, in case of complex digital system design, far from optimal. Similar problems concern the design of control units with standard ?eld-programmable logic devices (FPLD), such as PLA, PAL, GAL, CPLD, and FPGA. Let us point out that modern SoPC are based on CPLD or FPGA technology. Thus, the development of eff- tive design methods oriented on FPLD implementation of logic circuits used in the control units still remains the problem of great importance.

Tremendous achievements in the area of semiconductor electronics turn - croelectronics into nanoelectronics. Actually, we observe a real technical boom connected with achievements in nanoelectronics. It results in devel- mentofverycomplexintegratedcircuits,particularlythe?eldprogrammable logic devices (FPLD). Up-to-day FPLD chips are so huge, that it is enough only one chip to implement a really complex digital system including a da- path and a control unit. Because of the extreme complexity of modern - crochips, it is very important to develop e?ective design methods oriented on particular properties of logic elements. The development of digital s- tems with use of FPLD microchips is not possible without use of di?erent hardware description languages(HDL), such as VHDL and Verilog. Di?erent computer-aided design tools (CAD) are wide used to develop digital system hardware. As majorityof researchespoint out, the design processis nowvery similar to the process of program development. It allows a researcher to pay more attention to some speci?c problems, where there are no standard f- mal methods of their solution.But application of all these achievements does not guaranteeper sedevelopmentof some competitiveelectronic product,- pecially in the acceptable time-to-market. This problem solution is possible only if a researcher possesses fundamental knowledge of a design process and knows exactly the mode of operation of industrial CAD tools in use. As it is known, any digital system can be represented as a composition of a da- path and a control unit.

One of the very important parts of any digital system is the control unit, coordin- ing interplay of other system blocks. As a rule, control units have irregular str- ture, which makes process of their logic circuits design very sophisticated. In case of complex logic controllers, the problem of system design is reduced practically to the design of control units. Actually, we observe a real technical boom connected with achievements in semiconductor technology. One of these is the development of integrated circuit known as the "systems-on-a-programmable- chip" (SoPC), where the number of elements approaches one billion. Because of the extreme complexity of microchips, it is very important to develop effective design methods oriented on particular properties of logical elements. Solution of this problem permits impr- ing functional capabilities of the target digital system inside single SoPC chip. As majority of researches point out, design methods used in case of industrial packages are, in case of complex digital system design, far from optimal. Similar problems concern the design of control units with standard ?eld-programmable logic devices (FPLD), such as PLA, PAL, GAL, CPLD, and FPGA. Let us point out that modern SoPC are based on CPLD or FPGA technology. Thus, the development of eff- tive design methods oriented on FPLD implementation of logic circuits used in the control units still remains the problem of great importance.

Logic design of digital devices is a very important part of the Computer Science. It deals with design and testing of logic circuits for both data-path and control unit of a digital system. Design methods depend strongly on logic elements using for implementation of logic circuits. Different programmable logic devices are wide used for implementation of logic circuits. Nowadays, we witness the rapid growth of new and new chips, but there is a strong lack of new design methods. This book includes a variety of design and test methods targeted on different digital devices. It covers methods of digital system design, the development of theoretical base for construction and designing of the PLD–based devices, application of UML for digital design. A considerable part of the book is devoted to design methods oriented on implementing control units using FPGA and CPLD chips. Such important issues as design of reliable FSMs, automatic design of concurrent logic controllers, the models and methods for creating infrastructure IP services for the SoCs are also presented.The editors of the book hope that it will be interesting and useful for experts in Computer Science and Electronics, as well as for students, who are viewed as designers of future digital devices and systems.

The book is devoted to mathematical foundations providing synthesis and analysis of control and adaptation algorithms targeting modern telecommunication systems (TCS). These algorithms are finding more and more applications in modern telecommunication technologies and they determine the efficiency of TCS. The concept of telecommunication management network is used as a base methodology. The most popular technologies and network management methods are discussed. They include such issues as Common Management Information Protocol, Remote Network Management Protocol Information Base, Simple Network Management Protocol, and Net Flow. The methods of state variables are used as the main mathematic approaches for simulating control tasks. It allows solving the dynamic problems in the recursive style. The decomposition theorem is used for synthesis of control algorithms. Such issues as control algorithms for system observation and system state are discussed in details. The interpretation of applicability for discussed algorithms is given. Some part of the book is devoted to methods of statistic gathering and suppressing of a priori uncertainty. They are reduced to constructing adaptive procedures and algorithms of self-organization and self-repairing for intellectual taught systems. The neural networks, multifunctional automata and Petri nets are discussed as examples. Also, tasks and problems of business processes management are shown in their connection with TCS. Our book targets on students, PhD students and professionals in the area of telecommunications. We hope it will be useful for everybody connected with the new information technologies.

Tremendous achievements in the area of semiconductor electronics turn - croelectronics into nanoelectronics. Actually, we observe a real technical boom connected with achievements in nanoelectronics. It results in devel- mentofverycomplexintegratedcircuits,particularlythe?eldprogrammable logic devices (FPLD). Up-to-day FPLD chips are so huge, that it is enough only one chip to implement a really complex digital system including a da- path and a control unit. Because of the extreme complexity of modern - crochips, it is very important to develop e?ective design methods oriented on particular properties of logic elements. The development of digital s- tems with use of FPLD microchips is not possible without use of di?erent hardware description languages(HDL), such as VHDL and Verilog. Di?erent computer-aided design tools (CAD) are wide used to develop digital system hardware. As majorityof researchespoint out, the design processis nowvery similar to the process of program development. It allows a researcher to pay more attention to some speci?c problems, where there are no standard f- mal methods of their solution.But application of all these achievements does not guaranteeper sedevelopmentof some competitiveelectronic product,- pecially in the acceptable time-to-market. This problem solution is possible only if a researcher possesses fundamental knowledge of a design process and knows exactly the mode of operation of industrial CAD tools in use. As it is known, any digital system can be represented as a composition of a da- path and a control unit.

The book is devoted to mathematical foundations providing synthesis and analysis of control and adaptation algorithms targeting modern telecommunication systems (TCS). These algorithms are finding more and more applications in modern telecommunication technologies and they determine the efficiency of TCS. The concept of telecommunication management network is used as a base methodology. The most popular technologies and network management methods are discussed. They include such issues as Common Management Information Protocol, Remote Network Management Protocol Information Base, Simple Network Management Protocol, and Net Flow. The methods of state variables are used as the main mathematic approaches for simulating control tasks. It allows solving the dynamic problems in the recursive style. The decomposition theorem is used for synthesis of control algorithms. Such issues as control algorithms for system observation and system state are discussed in details. The interpretation of applicability for discussed algorithms is given. Some part of the book is devoted to methods of statistic gathering and suppressing of a priori uncertainty. They are reduced to constructing adaptive procedures and algorithms of self-organization and self-repairing for intellectual taught systems. The neural networks, multifunctional automata and Petri nets are discussed as examples. Also, tasks and problems of business processes management are shown in their connection with TCS. Our book targets on students, PhD students and professionals in the area of telecommunications. We hope it will be useful for everybody connected with the new information technologies.

So far there does not exist any theory of adaptive spatial signal processing (ASSP) for signals with uncertain parameters. This monograph is devoted to the development of this theory, which is very important in connection with wide spreading of telecommunications and radio links in the modern society. This theory can be applied for the development of effective radio communications. In the book some original approaches are proposed targeting the development of effective algorithms of ASSP with not exactly known parameters. They include both probabilistic and deterministic approaches for synthesis of robust algorithms of ASSP. The solution of problems also can be reduced to the construction of some operators for the Banach space which is presented in the book.  “Methods of Signal Processing for Adaptive Antenna Arrays” targets professionals, students and PhD students in the area of telecommunications and should be useful for everybody connected with the new information technologies.

Logic design of digital devices is a very important part of the Computer Science. It deals with design and testing of logic circuits for both data-path and control unit of a digital system. Design methods depend strongly on logic elements using for implementation of logic circuits. Different programmable logic devices are wide used for implementation of logic circuits. Nowadays, we witness the rapid growth of new and new chips, but there is a strong lack of new design methods. This book includes a variety of design and test methods targeted on different digital devices. It covers methods of digital system design, the development of theoretical base for construction and designing of the PLD–based devices, application of UML for digital design. A considerable part of the book is devoted to design methods oriented on implementing control units using FPGA and CPLD chips. Such important issues as design of reliable FSMs, automatic design of concurrent logic controllers, the models and methods for creating infrastructure IP services for the SoCs are also presented.The editors of the book hope that it will be interesting and useful for experts in Computer Science and Electronics, as well as for students, who are viewed as designers of future digital devices and systems.