Bernd Kleinjohann – författare
Visar alla böcker från författaren Bernd Kleinjohann. Handla med fri frakt och snabb leverans.
19 produkter
19 produkter
Inbunden, Engelska, 2008
1 123 kr
Skickas inom 10-15 vardagar
This year, the IFIP Working Conference on Distributed and Parallel Embedded Sys tems (DIPES 2008) is held as part of the IFIP World Computer Congress, held in Milan on September 7 10, 2008. The embedded systems world has a great deal of experience with parallel and distributed computing. Many embedded computing systems require the high performance that can be delivered by parallel computing. Parallel and distributed computing are often the only ways to deliver adequate real time performance at low power levels. This year’s conference attracted 30 submissions, of which 21 were accepted. Prof. Jor ¨ g Henkel of the University of Karlsruhe graciously contributed a keynote address on embedded computing and reliability. We would like to thank all of the program committee members for their diligence. Wayne Wolf, Bernd Kleinjohann, and Lisa Kleinjohann Acknowledgements We would like to thank all people involved in the organization of the IFIP World Computer Congress 2008, especially the IPC Co Chairs Judith Bishop and Ivo De Lotto, the Organization Chair Giulio Occhini, as well as the Publications Chair John Impagliazzo. Further thanks go to the authors for their valuable contributions to DIPES 2008. Last but not least we would like to acknowledge the considerable amount of work and enthusiasm spent by our colleague Claudius Stern in preparing theproceedingsofDIPES2008. Hemadeitpossibletoproducethemintheircurrent professional and homogeneous style.
E-bok
PDF, Engelska, 20081 408 kr
Läs direkt efter köp
This year, the IFIP Working Conference on Distributed and Parallel Embedded Sys tems (DIPES 2008) is held as part of the IFIP World Computer Congress, held in Milan on September 7 10, 2008. The embedded systems world has a great deal of experience with parallel and distributed computing. Many embedded computing systems require the high performance that can be delivered by parallel computing. Parallel and distributed computing are often the only ways to deliver adequate real time performance at low power levels. This year’s conference attracted 30 submissions, of which 21 were accepted. Prof. Jor ¨ g Henkel of the University of Karlsruhe graciously contributed a keynote address on embedded computing and reliability. We would like to thank all of the program committee members for their diligence. Wayne Wolf, Bernd Kleinjohann, and Lisa Kleinjohann Acknowledgements We would like to thank all people involved in the organization of the IFIP World Computer Congress 2008, especially the IPC Co Chairs Judith Bishop and Ivo De Lotto, the Organization Chair Giulio Occhini, as well as the Publications Chair John Impagliazzo. Further thanks go to the authors for their valuable contributions to DIPES 2008. Last but not least we would like to acknowledge the considerable amount of work and enthusiasm spent by our colleague Claudius Stern in preparing theproceedingsofDIPES2008. Hemadeitpossibletoproducethemintheircurrent professional and homogeneous style.
E-bok
PDF, Engelska, 20132 110 kr
Läs direkt efter köp
Due to the decreasing production costs of IT systems, applications that had to be realised as expensive PCBs formerly, can now be realised as a system-on-chip. Furthermore, low cost broadband communication media for wide area communication as well as for the realisation of local distributed systems are available. Typically the market requires IT systems that realise a set of specific features for the end user in a given environment, so called embedded systems. Some examples for such embedded systems are control systems in cars, airplanes, houses or plants, information and communication devices like digital TV, mobile phones or autonomous systems like service- or edutainment robots. For the design of embedded systems the designer has to tackle three major aspects: The application itself including the man-machine interface, The (target) architecture of the system including all functional and non-functional constraints and, the design methodology including modelling, specification, synthesis, test and validation. The last two points are a major focus of this book. This book documents the high quality approaches and results that were presented at the International Workshop on Distributed and Parallel Embedded Systems (DIPES 2000), which was sponsored by the International Federation for Information Processing (IFIP), and organised by IFIP working groups WG10.3, WG10.4 and WG10.5. The workshop took place on October 18-19, 2000, in Schloß Eringerfeld near Paderborn, Germany. Architecture and Design of Distributed Embedded Systems is organised similar to the workshop. Chapters 1 and 4 (Methodology I and II) deal with different modelling and specification paradigms and the corresponding design methodologies. Generic system architectures for different classes of embedded systems are presented in Chapter 2. In Chapter 3 several design environments for the support ofspecific design methodologies are presented. Problems concerning test and validation are discussed in Chapter 5. The last two chapters include distribution and communication aspects (Chapter 6) and synthesis techniques for embedded systems (Chapter 7). This book is essential reading for computer science researchers and application developers.
E-bok
PDF, Engelska, 20132 036 kr
Läs direkt efter köp
Design and Analysis of Distributed Embedded Systems is organized similar to the conference. Chapters 1 and 2 deal with specification methods and their analysis while Chapter 6 concentrates on timing and performance analysis. Chapter 3 describes approaches to system verification at different levels of abstraction. Chapter 4 deals with fault tolerance and detection. Middleware and software reuse aspects are treated in Chapter 5. Chapters 7 and 8 concentrate on the distribution related topics such as partitioning, scheduling and communication. The book closes with a chapter on design methods and frameworks.
Inbunden, Engelska, 2006
1 123 kr
Skickas inom 10-15 vardagar
Embedded computing systems have started to carry out the key control functions in diverse domains such as telecommunications, automotive electronics, avionics and even complete industrial manufacturing lines. Traditionally, such embedded control systems have been implemented in a monolithic, centralized manner. However, distributed and parallel solutions have been steadily gaining popularity. In a distributed setup, the control task is carried out by a number of controllers distributed over the entire system and interconnected as a network by communication components such as field buses. More demanding local control applications require controllers based on parallel architectures or processors with dedicated co-processors. Distribution and parallelism in embedded system design increase the engineering challenges and demand new development methods and tools.From Model-Driven Design to Resource Management for Distributed Embedded Systems contains 16 original contributions as well as 12 invited papers by distinguished invited speakers. These papers were presented at the Working Conference on Distributed and Parallel Embedded Systems (DIPES 2006), which was held in October 2006 in Braga, Portugal, and sponsored by the International Federation for Information Processing (IFIP).This volume covers the following very timely topics: model-driven design, test and evolution of embedded systems, timing analysis and predictability, scheduling, allocation, communication and resource management in distributed real-time systems.
E-bok
PDF, Engelska, 20071 408 kr
Läs direkt efter köp
Embedded computing systems have started to carry out the key control functions in diverse domains such as telecommunications, automotive electronics, avionics and even complete industrial manufacturing lines. Traditionally, such embedded control systems have been implemented in a monolithic, centralized manner. However, distributed and parallel solutions have been steadily gaining popularity. In a distributed setup, the control task is carried out by a number of controllers distributed over the entire system and interconnected as a network by communication components such as field buses. More demanding local control applications require controllers based on parallel architectures or processors with dedicated co-processors. Distribution and parallelism in embedded system design increase the engineering challenges and demand new development methods and tools.
From Model-Driven Design to Resource Management for Distributed Embedded Systems contains 16 original contributions as well as 12 invited papers by distinguished invited speakers. These papers were presented at the Working Conference on Distributed and Parallel Embedded Systems (DIPES 2006), which was held in October 2006 in Braga, Portugal, and sponsored by the International Federation for Information Processing (IFIP).
This volume covers the following very timely topics: model-driven design, test and evolution of embedded systems, timing analysis and predictability, scheduling, allocation, communication and resource management in distributed real-time systems.
Inbunden, Engelska, 2001
1 674 kr
Skickas inom 10-15 vardagar
Due to the decreasing production costs of IT systems, applications that had to be realised as expensive PCBs formerly, can now be realised as a system-on-chip. Furthermore, low cost broadband communication media for wide area communication as well as for the realisation of local distributed systems are available. Typically the market requires IT systems that realise a set of specific features for the end user in a given environment, so called embedded systems. Some examples for such embedded systems are control systems in cars, airplanes, houses or plants, information and communication devices like digital TV, mobile phones or autonomous systems like service- or edutainment robots. For the design of embedded systems the designer has to tackle three major aspects: The application itself including the man-machine interface, The (target) architecture of the system including all functional and non-functional constraints and, the design methodology including modelling, specification, synthesis, test and validation. The last two points are a major focus of this book. This book documents the high quality approaches and results that were presented at the International Workshop on Distributed and Parallel Embedded Systems (DIPES 2000), which was sponsored by the International Federation for Information Processing (IFIP), and organised by IFIP working groups WG10.3, WG10.4 and WG10.5. The workshop took place on October 18-19, 2000, in Schloß Eringerfeld near Paderborn, Germany. Architecture and Design of Distributed Embedded Systems is organised similar to the workshop. Chapters 1 and 4 (Methodology I and II) deal with different modelling and specification paradigms and the corresponding design methodologies. Generic system architectures for different classes of embedded systems are presented in Chapter 2. In Chapter 3 several design environments for the support ofspecific design methodologies are presented. Problems concerning test and validation are discussed in Chapter 5. The last two chapters include distribution and communication aspects (Chapter 6) and synthesis techniques for embedded systems (Chapter 7). This book is essential reading for computer science researchers and application developers.
Inbunden, Engelska, 2002
1 674 kr
Skickas inom 10-15 vardagar
The market is steadily growing for embedded systems which are IT systems that realize a set of specific features for the end user in a given environment. Some examples are control systems in cars, airplanes or houses, information and communication devices such as digital TV and mobile phones, and autonomous systems such as service or edutainment robots. Due to steady improvements of production processes, each of those applications is now realized as a system-on-chip. Furthermore, on the hardware side, low-cost broadband communication media are the technological components essential in the realization of distributed systems. In order to ease the use of the variety of communication systems, middleware solutions for embedded systems are emerging. The verification of system correctness during the entire design cycle and the guarantee of non-functional requirements such as real-time support or dependability requirements play a major role for such distributed solutions and hence, are the focus of this book.This book documents recent approaches and results presented at the Distributed and Parallel Embedded Systems (DIPES 2002) stream of the 17th World Computer Congress, which was sponsored by the International Federation for Information Processing (IFIP) and held in Montreal, Quebec, Canada in August 2002. This TC 10 Stream was organized by the IFIP WG 10.5 Special Interest Group on Embedded Systems (SIG-ES) in co-operation with WG 10.3 and WG 10.4.
708 kr
Läs direkt efter köp
The IFIP TC-10 Working Conference on Distributed and Parallel Embedded Systems (DIPES 2004) brings together experts from industry and academia to discuss recent developments in this important and growing field in the splendid city of Toulouse, France. The ever decreasing price/performance ratio of microcontrollers makes it economically attractive to replace more and more conventional mechanical or electronic control systems within many products by embedded real-time computer systems. An embedded real-time computer system is always part of a well-specified larger system, which we call an intelligent product. Although most intelligent products start out as stand-alone units, many of them are required to interact with other systems at a later stage. At present, many industries are in the middle of this transition from stand-alone products to networked embedded systems. This transition requires reflection and architecting: The complexity of the evolving distributed artifact can only be controlled, if careful planning and principled design methods replace the - hoc engineering of the first version of many standalone embedded products.
Del 271 - IFIP Advances in Information and Communication Technology
Distributed Embedded Systems: Design, Middleware and Resources
IFIP 20th World Computer Congress, TC10 Working Conference on Distributed and Parallel Embedded Systems (DIPES 2008), September 7-10, 2008, Milano, Italy
Häftad, Engelska, 2010
1 119 kr
Skickas inom 10-15 vardagar
This year, the IFIP Working Conference on Distributed and Parallel Embedded Sys tems (DIPES 2008) is held as part of the IFIP World Computer Congress, held in Milan on September 7 10, 2008. The embedded systems world has a great deal of experience with parallel and distributed computing. Many embedded computing systems require the high performance that can be delivered by parallel computing. Parallel and distributed computing are often the only ways to deliver adequate real time performance at low power levels. This year’s conference attracted 30 submissions, of which 21 were accepted. Prof. Jor ¨ g Henkel of the University of Karlsruhe graciously contributed a keynote address on embedded computing and reliability. We would like to thank all of the program committee members for their diligence. Wayne Wolf, Bernd Kleinjohann, and Lisa Kleinjohann Acknowledgements We would like to thank all people involved in the organization of the IFIP World Computer Congress 2008, especially the IPC Co Chairs Judith Bishop and Ivo De Lotto, the Organization Chair Giulio Occhini, as well as the Publications Chair John Impagliazzo. Further thanks go to the authors for their valuable contributions to DIPES 2008. Last but not least we would like to acknowledge the considerable amount of work and enthusiasm spent by our colleague Claudius Stern in preparing theproceedingsofDIPES2008. Hemadeitpossibletoproducethemintheircurrent professional and homogeneous style.
Del 225 - IFIP Advances in Information and Communication Technology
From Model-Driven Design to Resource Management for Distributed Embedded Systems
IFIP TC 10 Working Conference on Distributed and Parallel Embedded Systems (DIPES 2006) October 11-13, 2006, Braga, Portugal
Häftad, Engelska, 2010
1 119 kr
Skickas inom 10-15 vardagar
Embedded computing systems have started to carry out the key control functions in diverse domains such as telecommunications, automotive electronics, avionics and even complete industrial manufacturing lines. Traditionally, such embedded control systems have been implemented in a monolithic, centralized manner. However, distributed and parallel solutions have been steadily gaining popularity. In a distributed setup, the control task is carried out by a number of controllers distributed over the entire system and interconnected as a network by communication components such as field buses. More demanding local control applications require controllers based on parallel architectures or processors with dedicated co-processors. Distribution and parallelism in embedded system design increase the engineering challenges and demand new development methods and tools.From Model-Driven Design to Resource Management for Distributed Embedded Systems contains 16 original contributions as well as 12 invited papers by distinguished invited speakers. These papers were presented at the Working Conference on Distributed and Parallel Embedded Systems (DIPES 2006), which was held in October 2006 in Braga, Portugal, and sponsored by the International Federation for Information Processing (IFIP).This volume covers the following very timely topics: model-driven design, test and evolution of embedded systems, timing analysis and predictability, scheduling, allocation, communication and resource management in distributed real-time systems.
625 kr
Skickas inom 5-8 vardagar
Del 61 - IFIP Advances in Information and Communication Technology
Architecture and Design of Distributed Embedded Systems
IFIP WG10.3/WG10.4/WG10.5 International Workshop on Distributed and Parallel Embedded Systems (DIPES 2000) October 18–19, 2000, Schloß Eringerfeld, Germany
Häftad, Engelska, 2013
1 674 kr
Skickas inom 10-15 vardagar
Due to the decreasing production costs of IT systems, applications that had to be realised as expensive PCBs formerly, can now be realised as a system-on-chip. Furthermore, low cost broadband communication media for wide area communication as well as for the realisation of local distributed systems are available. Typically the market requires IT systems that realise a set of specific features for the end user in a given environment, so called embedded systems. Some examples for such embedded systems are control systems in cars, airplanes, houses or plants, information and communication devices like digital TV, mobile phones or autonomous systems like service- or edutainment robots. For the design of embedded systems the designer has to tackle three major aspects: The application itself including the man-machine interface, The (target) architecture of the system including all functional and non-functional constraints and, the design methodology including modelling, specification, synthesis, test and validation. The last two points are a major focus of this book. This book documents the high quality approaches and results that were presented at the International Workshop on Distributed and Parallel Embedded Systems (DIPES 2000), which was sponsored by the International Federation for Information Processing (IFIP), and organised by IFIP working groups WG10.3, WG10.4 and WG10.5. The workshop took place on October 18-19, 2000, in Schloß Eringerfeld near Paderborn, Germany. Architecture and Design of Distributed Embedded Systems is organised similar to the workshop. Chapters 1 and 4 (Methodology I and II) deal with different modelling and specification paradigms and the corresponding design methodologies. Generic system architectures for different classes of embedded systems are presented in Chapter 2. In Chapter 3 several design environments for the support ofspecific design methodologies are presented. Problems concerning test and validation are discussed in Chapter 5. The last two chapters include distribution and communication aspects (Chapter 6) and synthesis techniques for embedded systems (Chapter 7). This book is essential reading for computer science researchers and application developers.
648 kr
Skickas inom 5-8 vardagar
Del 91 - IFIP Advances in Information and Communication Technology
Design and Analysis of Distributed Embedded Systems
IFIP 17th World Computer Congress - TC10 Stream on Distributed and Parallel Embedded Systems (DIPES 2002) August 25–29, 2002, Montréal, Québec, Canada
Häftad, Engelska, 2013
1 674 kr
Skickas inom 10-15 vardagar
Design and Analysis of Distributed Embedded Systems is organized similar to the conference. Chapters 1 and 2 deal with specification methods and their analysis while Chapter 6 concentrates on timing and performance analysis. Chapter 3 describes approaches to system verification at different levels of abstraction. Chapter 4 deals with fault tolerance and detection. Middleware and software reuse aspects are treated in Chapter 5. Chapters 7 and 8 concentrate on the distribution related topics such as partitioning, scheduling and communication. The book closes with a chapter on design methods and frameworks.
Del 150 - IFIP Advances in Information and Communication Technology
Design Methods and Applications for Distributed Embedded Systems
IFIP 18th World Computer Congress, TC10 Working Conference on Distributed and Parallel, Embedded Systems (DIPES 2004), 22–27 August, 2004 Toulouse, France
Häftad, Engelska, 2013
563 kr
Skickas inom 10-15 vardagar
The IFIP TC-10 Working Conference on Distributed and Parallel Embedded Systems (DIPES 2004) brings together experts from industry and academia to discuss recent developments in this important and growing field in the splendid city of Toulouse, France. The ever decreasing price/performance ratio of microcontrollers makes it economically attractive to replace more and more conventional mechanical or electronic control systems within many products by embedded real-time computer systems. An embedded real-time computer system is always part of a well-specified larger system, which we call an intelligent product. Although most intelligent products start out as stand-alone units, many of them are required to interact with other systems at a later stage. At present, many industries are in the middle of this transition from stand-alone products to networked embedded systems. This transition requires reflection and architecting: The complexity of the evolving distributed artifact can only be controlled, if careful planning and principled design methods replace the - hoc engineering of the first version of many standalone embedded products.
Del 329 - IFIP Advances in Information and Communication Technology
Distributed, Parallel and Biologically Inspired Systems
7th IFIP TC 10 Working Conference, DIPES 2010, and 3rd IFIP TC 10 International Conference, BICC 2010, Held as Part of WCC 2010, Brisbane, Australia, September 20-23, 2010, Proceedings
Inbunden, Engelska, 2010
566 kr
Skickas inom 10-15 vardagar
st This volume contains the proceedings of two conferences held as part of the 21 IFIP World Computer Congress in Brisbane, Australia, 20–23 September 2010. th The first part of the book presents the proceedings of DIPES 2010, the 7 IFIP Conference on Distributed and Parallel Embedded Systems. The conference, int- duced in a separate preface by the Chairs, covers a range of topics from specification and design of embedded systems through to dependability and fault tolerance. rd The second part of the book contains the proceedings of BICC 2010, the 3 IFIP Conference on Biologically-Inspired Collaborative Computing. The conference is concerned with emerging techniques from research areas such as organic computing, autonomic computing and self-adaptive systems, where inspiraton for techniques - rives from exhibited behaviour in nature and biology. Such techniques require the use of research developed by the DIPES community in supporting collaboration over multiple systems. We hope that the combination of the two proceedings will add value for the reader and advance our related work.
708 kr
Läs direkt efter köp
st This volume contains the proceedings of two conferences held as part of the 21 IFIP World Computer Congress in Brisbane, Australia, 20–23 September 2010. th The first part of the book presents the proceedings of DIPES 2010, the 7 IFIP Conference on Distributed and Parallel Embedded Systems. The conference, int- duced in a separate preface by the Chairs, covers a range of topics from specification and design of embedded systems through to dependability and fault tolerance. rd The second part of the book contains the proceedings of BICC 2010, the 3 IFIP Conference on Biologically-Inspired Collaborative Computing. The conference is concerned with emerging techniques from research areas such as organic computing, autonomic computing and self-adaptive systems, where inspiraton for techniques - rives from exhibited behaviour in nature and biology. Such techniques require the use of research developed by the DIPES community in supporting collaboration over multiple systems. We hope that the combination of the two proceedings will add value for the reader and advance our related work.
Del 329 - IFIP Advances in Information and Communication Technology
Distributed, Parallel and Biologically Inspired Systems
7th IFIP TC 10 Working Conference, DIPES 2010, and 3rd IFIP TC 10 International Conference, BICC 2010, Held as Part of WCC 2010, Brisbane, Australia, September 20-23, 2010, Proceedings
Häftad, Engelska, 2014
566 kr
Skickas inom 10-15 vardagar
st This volume contains the proceedings of two conferences held as part of the 21 IFIP World Computer Congress in Brisbane, Australia, 20–23 September 2010. th The first part of the book presents the proceedings of DIPES 2010, the 7 IFIP Conference on Distributed and Parallel Embedded Systems. The conference, int- duced in a separate preface by the Chairs, covers a range of topics from specification and design of embedded systems through to dependability and fault tolerance. rd The second part of the book contains the proceedings of BICC 2010, the 3 IFIP Conference on Biologically-Inspired Collaborative Computing. The conference is concerned with emerging techniques from research areas such as organic computing, autonomic computing and self-adaptive systems, where inspiraton for techniques - rives from exhibited behaviour in nature and biology. Such techniques require the use of research developed by the DIPES community in supporting collaboration over multiple systems. We hope that the combination of the two proceedings will add value for the reader and advance our related work.