Achim Rettberg – författare
Visar alla böcker från författaren Achim Rettberg. Handla med fri frakt och snabb leverans.
21 produkter
21 produkter
1 095 kr
Skickas inom 10-15 vardagar
As almost no other technology, embedded systems is an essential element of many innovations in automotive engineering. New functions and improvements of already existing functions, as well as the compliance with traffic regulations and customer requirements, have only become possible by the increasing use of electronic systems, especially in the fields of driving, safety, reliability, and functionality. Along with the functionalities that increase in number and have to cooperate, the complexity of the entire system will increase.Synergy effects resulting from distributed application functionalities via several electronic control devies, exchanging information through the network brings about more complex system architectures with many different sub-networks, operating with different velocities and different protocol implementations.To manage the increasing complexity of these systems, a deterministic behaviour of the control units and the communication network must be provided for, in particular when dealing with a distributed functionality.From Specification to Embedded Systems Application documents recent approaches and results presented at the International Embedded Systems Symposium (IESS 2005), which was held in August 2005 in Manaus (Brazil) and sponsored by the International Federation for Information Processing (IFIP).The topics which have been chosen for this working conference are very timely: design methodology, modeling, specification, software synthesis, power management, formal verification, testing, network, communication systems, distributed control systems, resource management and special aspects in system design.
New Trends and Technologies in Computer-Aided Learning for Computer-Aided Design
IFIP International Working Conference: EduTech 2005, Perth, Australia, October 20-21, 2005
Inbunden, Engelska, 2005
520 kr
Skickas inom 10-15 vardagar
"New Trends and Technologies in Computer-Aided Learning for Computer-Aided Design" contains the proceedings from the EduTech Workshop, an IFIP TC-10 Working Conference held in Perth, Australia. The workshop aimed to explore the interrelationship between computer-aided technology and computer-aided learning. Computation and communication technologies underpin work and development in many different areas. Among them, Computer-Aided Design of electronic systems and E-Learning technologies are two areas which are different but share many concerns. The design of CAD and E-Learning systems already touches on a number of parallels, such as system interoperability, user interfaces, standardization, EML-based formats, reusability aspects (of content or designs), and intellectual property rights. Furthermore, the teaching of Design Automation tools and methods is particularly amenable to a distant or blended learning setting, and implies the interconnection of typical CAD tools, such as simulators or synthesis tools, with e-learning tools.
Embedded System Design: Topics, Techniques and Trends
IFIP TC10 Working Conference: International Embedded Systems Symposium (IESS), May 30 - June 1, 2007, Irvine (CA), USA
Inbunden, Engelska, 2007
1 095 kr
Skickas inom 10-15 vardagar
Over recent years, embedded systems have gained an enormous amount of processing power and functionality. Many of the formerly external components can now be integrated into a single System-on-Chip. This tendency has resulted in a dramatic reduction in the size and cost of embedded systems. As a unique technology, the design of embedded systems is an essential element of many innovations.Embedded System Design: Topics, Techniques and Trends presents the technical program of the International Embedded Systems Symposium (IESS) 2007 held in Irvine, California. IESS is a unique forum to present novel ideas, exchange timely research results, and discuss the state of the art and future trends in the field of embedded systems. Contributors and participants from both industry and academia take active part in this symposium. The IESS conference is organized by the Computer Systems Technology committee (TC10) of the International Federation for Information Processing (IFIP). Timley topics, techniques and trends in embedded system design are covered by the chapters in this book, including design methodology, specification and modeling, embedded software and hardware synthesis, networks-on-chip, distributed and networked systems, and system verification and validation. Particular emphaisis is paid to automotive and medical applications. A set of actual case studies and special aspects in embedded system design are included as well.
Design and Analysis of Distributed Embedded Systems
IFIP 17th World Computer Congress - TC10 Stream on Distributed and Parallel Embedded Systems (DIPES 2002) August 25–29, 2002, Montréal, Québec, Canada
Inbunden, Engelska, 2002
1 639 kr
Skickas inom 10-15 vardagar
The market is steadily growing for embedded systems which are IT systems that realize a set of specific features for the end user in a given environment. Some examples are control systems in cars, airplanes or houses, information and communication devices such as digital TV and mobile phones, and autonomous systems such as service or edutainment robots. Due to steady improvements of production processes, each of those applications is now realized as a system-on-chip. Furthermore, on the hardware side, low-cost broadband communication media are the technological components essential in the realization of distributed systems. In order to ease the use of the variety of communication systems, middleware solutions for embedded systems are emerging. The verification of system correctness during the entire design cycle and the guarantee of non-functional requirements such as real-time support or dependability requirements play a major role for such distributed solutions and hence, are the focus of this book.This book documents recent approaches and results presented at the Distributed and Parallel Embedded Systems (DIPES 2002) stream of the 17th World Computer Congress, which was sponsored by the International Federation for Information Processing (IFIP) and held in Montreal, Quebec, Canada in August 2002. This TC 10 Stream was organized by the IFIP WG 10.5 Special Interest Group on Embedded Systems (SIG-ES) in co-operation with WG 10.3 and WG 10.4.
Del 184 - IFIP Advances in Information and Communication Technology
From Specification to Embedded Systems Application
Häftad, Engelska, 2010
1 095 kr
Skickas inom 10-15 vardagar
As almost no other technology, embedded systems is an essential element of many innovations in automotive engineering. New functions and improvements of already existing functions, as well as the compliance with traffic regulations and customer requirements, have only become possible by the increasing use of electronic systems, especially in the fields of driving, safety, reliability, and functionality. Along with the functionalities that increase in number and have to cooperate, the complexity of the entire system will increase.Synergy effects resulting from distributed application functionalities via several electronic control devies, exchanging information through the network brings about more complex system architectures with many different sub-networks, operating with different velocities and different protocol implementations.To manage the increasing complexity of these systems, a deterministic behaviour of the control units and the communication network must be provided for, in particular when dealing with a distributed functionality.From Specification to Embedded Systems Application documents recent approaches and results presented at the International Embedded Systems Symposium (IESS 2005), which was held in August 2005 in Manaus (Brazil) and sponsored by the International Federation for Information Processing (IFIP).The topics which have been chosen for this working conference are very timely: design methodology, modeling, specification, software synthesis, power management, formal verification, testing, network, communication systems, distributed control systems, resource management and special aspects in system design.
Del 231 - IFIP Advances in Information and Communication Technology
Embedded System Design: Topics, Techniques and Trends
IFIP TC10 Working Conference: International Embedded Systems Symposium (IESS), May 30 - June 1, 2007, Irvine (CA), USA
Häftad, Engelska, 2010
1 095 kr
Skickas inom 10-15 vardagar
Over recent years, embedded systems have gained an enormous amount of processing power and functionality. Many of the formerly external components can now be integrated into a single System-on-Chip. This tendency has resulted in a dramatic reduction in the size and cost of embedded systems. As a unique technology, the design of embedded systems is an essential element of many innovations.Embedded System Design: Topics, Techniques and Trends presents the technical program of the International Embedded Systems Symposium (IESS) 2007 held in Irvine, California. IESS is a unique forum to present novel ideas, exchange timely research results, and discuss the state of the art and future trends in the field of embedded systems. Contributors and participants from both industry and academia take active part in this symposium. The IESS conference is organized by the Computer Systems Technology committee (TC10) of the International Federation for Information Processing (IFIP). Timley topics, techniques and trends in embedded system design are covered by the chapters in this book, including design methodology, specification and modeling, embedded software and hardware synthesis, networks-on-chip, distributed and networked systems, and system verification and validation. Particular emphaisis is paid to automotive and medical applications. A set of actual case studies and special aspects in embedded system design are included as well.
1 095 kr
Skickas inom 10-15 vardagar
This book describes the emerging field of self-organizing, multicore, distributed and real-time embedded systems. Self‐organization of both hardware and software can be a key technique to handle the growing complexity of modern computing systems. Distributed systems running hundreds of tasks on dozens of processors, each equipped with multiple cores, requires self‐organization principles to ensure efficient and reliable operation. This book addresses various, so-called Self‐X features such as self-configuration, self‐optimization, self‐adaptation, self‐healing and self‐protection.
Del 91 - IFIP Advances in Information and Communication Technology
Design and Analysis of Distributed Embedded Systems
IFIP 17th World Computer Congress - TC10 Stream on Distributed and Parallel Embedded Systems (DIPES 2002) August 25–29, 2002, Montréal, Québec, Canada
Häftad, Engelska, 2013
1 639 kr
Skickas inom 10-15 vardagar
Design and Analysis of Distributed Embedded Systems is organized similar to the conference. Chapters 1 and 2 deal with specification methods and their analysis while Chapter 6 concentrates on timing and performance analysis. Chapter 3 describes approaches to system verification at different levels of abstraction. Chapter 4 deals with fault tolerance and detection. Middleware and software reuse aspects are treated in Chapter 5. Chapters 7 and 8 concentrate on the distribution related topics such as partitioning, scheduling and communication. The book closes with a chapter on design methods and frameworks.
Del 150 - IFIP Advances in Information and Communication Technology
Design Methods and Applications for Distributed Embedded Systems
IFIP 18th World Computer Congress, TC10 Working Conference on Distributed and Parallel, Embedded Systems (DIPES 2004), 22–27 August, 2004 Toulouse, France
Häftad, Engelska, 2013
551 kr
Skickas inom 10-15 vardagar
The IFIP TC-10 Working Conference on Distributed and Parallel Embedded Systems (DIPES 2004) brings together experts from industry and academia to discuss recent developments in this important and growing field in the splendid city of Toulouse, France. The ever decreasing price/performance ratio of microcontrollers makes it economically attractive to replace more and more conventional mechanical or electronic control systems within many products by embedded real-time computer systems. An embedded real-time computer system is always part of a well-specified larger system, which we call an intelligent product. Although most intelligent products start out as stand-alone units, many of them are required to interact with other systems at a later stage. At present, many industries are in the middle of this transition from stand-alone products to networked embedded systems. This transition requires reflection and architecting: The complexity of the evolving distributed artifact can only be controlled, if careful planning and principled design methods replace the - hoc engineering of the first version of many standalone embedded products.
Del 192 - IFIP Advances in Information and Communication Technology
New Trends and Technologies in Computer-Aided Learning for Computer-Aided Design
IFIP International Working Conference: EduTech 2005, Perth, Australia, October 20-21, 2005
Häftad, Engelska, 2014
520 kr
Skickas inom 10-15 vardagar
"New Trends and Technologies in Computer-Aided Learning for Computer-Aided Design" contains the proceedings from the EduTech Workshop, an IFIP TC-10 Working Conference held in Perth, Australia. The workshop aimed to explore the interrelationship between computer-aided technology and computer-aided learning. Computation and communication technologies underpin work and development in many different areas. Among them, Computer-Aided Design of electronic systems and E-Learning technologies are two areas which are different but share many concerns. The design of CAD and E-Learning systems already touches on a number of parallels, such as system interoperability, user interfaces, standardization, EML-based formats, reusability aspects (of content or designs), and intellectual property rights. Furthermore, the teaching of Design Automation tools and methods is particularly amenable to a distant or blended learning setting, and implies the interconnection of typical CAD tools, such as simulators or synthesis tools, with e-learning tools.
1 064 kr
Skickas inom 10-15 vardagar
This book describes the emerging field of self-organizing, multicore, distributed and real-time embedded systems. Self‐organization of both hardware and software can be a key technique to handle the growing complexity of modern computing systems. Distributed systems running hundreds of tasks on dozens of processors, each equipped with multiple cores, requires self‐organization principles to ensure efficient and reliable operation. This book addresses various, so-called Self‐X features such as self-configuration, self‐optimization, self‐adaptation, self‐healing and self‐protection.
Analysis, Estimations, and Applications of Embedded Systems
6th IFIP TC 10 International Embedded Systems Symposium, IESS 2019, Friedrichshafen, Germany, September 9–11, 2019, Revised Selected Papers
Inbunden, Engelska, 2023
932 kr
Skickas inom 10-15 vardagar
This book constitutes the refereed proceedings of the 6th IFIP TC 10 International Embedded Systems Symposium, IESS 2019, which took place in Friedrichshafen, Germany, in September 2019. The 16 full papers and 4 short papers presented in this book were carefully reviewed and selected from 32 submissions.
Del 576 - IFIP Advances in Information and Communication Technology
Analysis, Estimations, and Applications of Embedded Systems
6th IFIP TC 10 International Embedded Systems Symposium, IESS 2019, Friedrichshafen, Germany, September 9–11, 2019, Revised Selected Papers
Häftad, Engelska, 2024
932 kr
Skickas inom 10-15 vardagar
This book constitutes the refereed proceedings of the 6th IFIP TC 10 International Embedded Systems Symposium, IESS 2019, which took place in Friedrichshafen, Germany, in September 2019. The 16 full papers and 4 short papers presented in this book were carefully reviewed and selected from 32 submissions.
Del 669 - IFIP Advances in Information and Communication Technology
Designing Modern Embedded Systems: Software, Hardware, and Applications
7th IFIP TC 10 International Embedded Systems Symposium, IESS 2022, Lippstadt, Germany, November 3–4, 2022, Proceedings
Inbunden, Engelska, 2023
932 kr
Skickas inom 10-15 vardagar
This book constitutes the refereed proceedings of the 7th IFIP TC 10 International Embedded Systems Symposium, IESS 2022, held in Lippstadt, Germany, during November 3-4, 2022. The 10 full revised papers and 2 short papers presented were carefully reviewed and selected from 13 submissions.
Del 669 - IFIP Advances in Information and Communication Technology
Designing Modern Embedded Systems: Software, Hardware, and Applications
7th IFIP TC 10 International Embedded Systems Symposium, IESS 2022, Lippstadt, Germany, November 3–4, 2022, Proceedings
Häftad, Engelska, 2024
928 kr
Skickas inom 5-8 vardagar
This book constitutes the refereed proceedings of the 7th IFIP TC 10 International Embedded Systems Symposium, IESS 2022, held in Lippstadt, Germany, during November 3-4, 2022. The 10 full revised papers and 2 short papers presented were carefully reviewed and selected from 13 submissions.
Del 760 - IFIP Advances in Information and Communication Technology
Architecting the Future: Intelligent Systems for Embedded AI, Autonomous Technologies, and Digital Twins
8th IFIP TC 10 International Embedded Systems Symposium, IESS 2024, Gainesville, FL, USA, October 14–15, 2024, Proceedings
Inbunden, Engelska, 2025
873 kr
Skickas inom 5-8 vardagar
This book constitutes the refereed proceedings of the 8th IFIP TC 10 International Embedded Systems Symposium, IESS 2024, held in Gainesville, FL, USA, during October 14–15, 2024.The 9 full papers included in this volume were carefully reviewed and selected from 10 submissions. They were organized in the following topical sections: Architectures and Integration for Intelligent Embedded Systems; Hardware-Aware Deep Learning for Edge and Mobile Platforms; Digital Twins and Smart Environments for Autonomous and Urban Systems.
System Level Design from HW/SW to Memory for Embedded Systems
5th IFIP TC 10 International Embedded Systems Symposium, IESS 2015, Foz do Iguaçu, Brazil, November 3–6, 2015, Proceedings
Inbunden, Engelska, 2018
551 kr
Skickas inom 10-15 vardagar
This book constitutes the refereed proceedings of the 5th IFIP TC 10 International Embedded Systems Symposium, IESS 2015, held in Foz do Iguaçu, Brazil, in November 2015.The 18 full revised papers presented were carefully reviewed and selected from 25 submissions. The papers present a broad discussion on the design, analysis and verification of embedded and cyber-physical systems including design methodologies, verification, performance analysis, and real-time systems design. They are organized in the following topical sections: cyber-physical systems, system-level design; multi/many-core system design; memory system design; and embedded HW/SW design and applications.
Analysis, Architectures and Modelling of Embedded Systems
Third IFIP TC 10 International Embedded Systems Symposium, IESS 2009, Langenargen, Germany, September 14-16, 2009, Proceedings
Inbunden, Engelska, 2009
1 095 kr
Skickas inom 10-15 vardagar
This book presents the technical program of the International Embedded Systems Symposium (IESS) 2009. Timely topics, techniques and trends in embedded system design are covered by the chapters in this volume, including modelling, simulation, verification, test, scheduling, platforms and processors. Particular emphasis is paid to automotive systems and wireless sensor networks. Sets of actual case studies in the area of embedded system design are also included. Over recent years, embedded systems have gained an enormous amount of proce- ing power and functionality and now enter numerous application areas, due to the fact that many of the formerly external components can now be integrated into a single System-on-Chip. This tendency has resulted in a dramatic reduction in the size and cost of embedded systems. As a unique technology, the design of embedded systems is an essential element of many innovations. Embedded systems meet their performance goals, including real-time constraints, through a combination of special-purpose hardware and software components tailored to the system requirements. Both the development of new features and the reuse of existing intellectual property components are essential to keeping up with ever more demanding customer requirements. Furthermore, design complexities are steadily growing with an increasing number of components that have to cooperate properly. Embedded system designers have to cope with multiple goals and constraints simul- neously, including timing, power, reliability, dependability, maintenance, packaging and, last but not least, price.
Del 310 - IFIP Advances in Information and Communication Technology
Analysis, Architectures and Modelling of Embedded Systems
Third IFIP TC 10 International Embedded Systems Symposium, IESS 2009, Langenargen, Germany, September 14-16, 2009, Proceedings
Häftad, Engelska, 2012
1 095 kr
Skickas inom 10-15 vardagar
This book presents the technical program of the International Embedded Systems Symposium (IESS) 2009. Timely topics, techniques and trends in embedded system design are covered by the chapters in this volume, including modelling, simulation, verification, test, scheduling, platforms and processors. Particular emphasis is paid to automotive systems and wireless sensor networks. Sets of actual case studies in the area of embedded system design are also included. Over recent years, embedded systems have gained an enormous amount of proce- ing power and functionality and now enter numerous application areas, due to the fact that many of the formerly external components can now be integrated into a single System-on-Chip. This tendency has resulted in a dramatic reduction in the size and cost of embedded systems. As a unique technology, the design of embedded systems is an essential element of many innovations. Embedded systems meet their performance goals, including real-time constraints, through a combination of special-purpose hardware and software components tailored to the system requirements. Both the development of new features and the reuse of existing intellectual property components are essential to keeping up with ever more demanding customer requirements. Furthermore, design complexities are steadily growing with an increasing number of components that have to cooperate properly. Embedded system designers have to cope with multiple goals and constraints simul- neously, including timing, power, reliability, dependability, maintenance, packaging and, last but not least, price.
Del 403 - IFIP Advances in Information and Communication Technology
Embedded Systems: Design, Analysis and Verification
4th IFIP TC 10 International Embedded Systems Symposium, IESS 2013, Paderborn, Germany, June 17-19, 2013, Proceedings
Inbunden, Engelska, 2013
551 kr
Skickas inom 10-15 vardagar
This book constitutes the refereed proceedings of the 4th IFIP TC 10 International Embedded Systems Symposium, IESS 2013, held in Paderborn, Germany, in June 2013. The 22 full revised papers presented together with 8 short papers were carefully reviewed and selected from 42 submissions. The papers have been organized in the following topical sections: design methodologies; non-functional aspects of embedded systems; verification; performance analysis; real-time systems; embedded system applications; and real-time aspects in distributed systems. The book also includes a special chapter dedicated to the BMBF funded ARAMIS project on Automotive, Railway and Avionics Multicore Systems.
Del 403 - IFIP Advances in Information and Communication Technology
Embedded Systems: Design, Analysis and Verification
4th IFIP TC 10 International Embedded Systems Symposium, IESS 2013, Paderborn, Germany, June 17-19, 2013, Proceedings
Häftad, Engelska, 2015
551 kr
Skickas inom 10-15 vardagar
This book constitutes the refereed proceedings of the 4th IFIP TC 10 International Embedded Systems Symposium, IESS 2013, held in Paderborn, Germany, in June 2013. The 22 full revised papers presented together with 8 short papers were carefully reviewed and selected from 42 submissions. The papers have been organized in the following topical sections: design methodologies; non-functional aspects of embedded systems; verification; performance analysis; real-time systems; embedded system applications; and real-time aspects in distributed systems. The book also includes a special chapter dedicated to the BMBF funded ARAMIS project on Automotive, Railway and Avionics Multicore Systems.