Mark J. Schulz is a Professor of Mechanical and Materials Engineering at the University of Cincinnati, and Co-director of the Nanoworld Laboratories at the University of Cincinnati. The strategic goal of the Nanoworld Labs is to solve societally important and complex problems, to integrate nanotech into university-wide curricula, to interest students to go to graduate school, and to develop new smart and nano materials and devices for engineering and medical use. Mark is a co-founder of two companies based on university technologies. Vesselin Shanov is a Professor of Chemical and Materials Engineering at the University of Cincinnati. He has received several prestigious awards including the Fulbright Award for Research and Teaching in the USA, and German Academic Foundation (DAAD) Grants. His recent research focuses on synthesis, characterization and processing of carbon nanotubes and graphene, with applications in the areas of energy storage, electronics and aerospace. He is a member of the Materials Research Society and co-founder and co-director of the teaching and research facility NANOWORLD Labs at the University of Cincinnati. Dr. Shanov has more than 300 scientific publications, including 16 patents, 12 provisional patents and 5 books, has been cited in about 3,100 different references. Zhangzhang (John) Yin is a Lead Chemist at Ecolab Inc. Previously he worked as the program manager at the NSF Engineering Research Center for Revolutionizing Metallic Biomaterials and Lab Manager in the Nanoworld Lab at the University of Cincinnati. Dr. Yin’s research interest includes corrosion, application of nanotechnology in medicine and water treatment. Dr. Yin received his B.S. from Tongji University and Ph.D. from the University of Cincinnati in Materials Engineering. Marc Cahay is a Professor and Department Head in the Department of Electrical and Computer Engineering at the University of Cincinnati. His current research interests include modeling of nanoscale devices, spintronics, experimental investigation of mesoscopic systems, vacuum micro- and nano-electronics, and organic light-emitting diodes. He has published over 140 journal articles in these areas. With Supriyo Bandyopadhyay, he has co-authored a textbook on an Introduction to Spintronics (CRC Press, Boca Raton, 2008) and a collection of Problems in Quantum Mechanics for Material Scientists, Applied Physicists, and Device Engineers (Wiley, 2017). He is a Fellow of ECS (Electrochemical Society), IEEE, (APS) American Physical Society, and AAAS (American Association for the Advancement of Science).

• 1. NNI 2.0 – Future Directions and Opportunities under the National Nanotechnology Initiative Part 1. Sensors and Devices2. Nanotubes for Sensing 3. Sheath-Core Conducting Fibers for Weavable Superelastic Wires, Biosensors, Supercapacitors, Strain Sensors, and Artificial Muscles 4. Creation of CNT junctions for 3D structures and virus isolation using VA-CNTs 5. Science and Application of sp2-Bonded Nanomaterials6. Nanostructured Cathode and Anode Materials for Vacuum Electronic Devices 7. Nano-Imprint Lithography for Tiny Devices 8. Nanotube Fiber Sensors for Heavy Metals in Liquids Part 2. Composite Materials and Textiles9. Nanotubes are Not the Only Carbon 10. Strain Measurement and Damage Detection using Integrated Carbon Nanotube Yarn Sensors 11. CNT/CF hybrid composites 12. 3D Textile and Foam Structures Enhanced by Aligned Carbon Nanotube Sheets13. CNT Sheet for Multi-Purpose Composite Materials and Textiles 14. Wearable NanoSensors Part 3. Electrical Conductors and Electronics15. Ultrawire new electrical conductor 16. Carbon Nanotube Electrical Conductors 17. Conductivity Mechanisms in CNT Yarns 18. Electromagnetic Simulation and Measurement of Carbon Nanotube Thread and Sheet Antennas 19. Development of Long Length Electrical Conductors Incorporating Nanotechnology: Carbon-Based and Superconducting 20. Electrical Conduction in Cu-Carbon Nanotube Fibers 21. Nanomagnetics for Power Applications 22. High Rate Manufacturing of Hybrid Cu-CNT Electrical ConductorsPart 4. Environmental, Biomedical, Thermal, and Space Applications23. High-efficiency Particulate Air Filters Based on Carbon Nanotubes 24. Water Filtering using Carbon Nanotube Sheets 25. Nanoengineering Materials for Heat Dissipation 26. Carbon Electric Motors 27. Heatable Carbon Nanotube Filters 28. Interplanetary NanoManufacturing Utilizing In-Situ Resources29. Medical Applications of Nanotube Materials Part 5. Energy30. Recent Advances in Boron Nitride Nanotubes: Manufacturing, Chemistry, Composites and Applications 31. Autonomous Research Systems for Carbon Nanotube Synthesis 32. Multidimensional and Multifunctional Graphitic Carbon Nanomaterials for Energy Conversion and Storage 33. Fluidized-Bed Production of Sub-Millimeter-Long Carbon Nanotubes and Their Application to Electrochemical Energy Storage Devices34. Energy Storage using Graphene and Carbon Nanotubes 35. Graphene: Large scale manufacturing and development of multifunctional materials

Mark J. Schulz is a Professor of Mechanical and Materials Engineering at the University of Cincinnati, and Co-director of the Nanoworld Laboratories at the University of Cincinnati. The strategic goal of the Nanoworld Labs is to solve societally important and complex problems, to integrate nanotech into university-wide curricula, to interest students to go to graduate school, and to develop new smart and nano materials and devices for engineering and medical use. Mark is a co-founder of two companies based on university technologies. Vesselin Shanov is a Professor of Chemical and Materials Engineering at the University of Cincinnati. He has received several prestigious awards including the Fulbright Award for Research and Teaching in the USA, and German Academic Foundation (DAAD) Grants. His recent research focuses on synthesis, characterization and processing of carbon nanotubes and graphene, with applications in the areas of energy storage, electronics and aerospace. He is a member of the Materials Research Society and co-founder and co-director of the teaching and research facility NANOWORLD Labs at the University of Cincinnati. Dr. Shanov has more than 300 scientific publications, including 16 patents, 12 provisional patents and 5 books, has been cited in about 3,100 different references. Zhangzhang (John) Yin is a Lead Chemist at Ecolab Inc. Previously he worked as the program manager at the NSF Engineering Research Center for Revolutionizing Metallic Biomaterials and Lab Manager in the Nanoworld Lab at the University of Cincinnati. Dr. Yin’s research interest includes corrosion, application of nanotechnology in medicine and water treatment. Dr. Yin received his B.S. from Tongji University and Ph.D. from the University of Cincinnati in Materials Engineering. Marc Cahay is a Professor and Department Head in the Department of Electrical and Computer Engineering at the University of Cincinnati. His current research interests include modeling of nanoscale devices, spintronics, experimental investigation of mesoscopic systems, vacuum micro- and nano-electronics, and organic light-emitting diodes. He has published over 140 journal articles in these areas. With Supriyo Bandyopadhyay, he has co-authored a textbook on an Introduction to Spintronics (CRC Press, Boca Raton, 2008) and a collection of Problems in Quantum Mechanics for Material Scientists, Applied Physicists, and Device Engineers (Wiley, 2017). He is a Fellow of ECS (Electrochemical Society), IEEE, (APS) American Physical Society, and AAAS (American Association for the Advancement of Science).

• 1. NNI 2.0 – Future Directions and Opportunities under the National Nanotechnology Initiative Part 1. Sensors and Devices2. Nanotubes for Sensing 3. Sheath-Core Conducting Fibers for Weavable Superelastic Wires, Biosensors, Supercapacitors, Strain Sensors, and Artificial Muscles 4. Creation of CNT junctions for 3D structures and virus isolation using VA-CNTs 5. Science and Application of sp2-Bonded Nanomaterials6. Nanostructured Cathode and Anode Materials for Vacuum Electronic Devices 7. Nano-Imprint Lithography for Tiny Devices 8. Nanotube Fiber Sensors for Heavy Metals in Liquids Part 2. Composite Materials and Textiles9. Nanotubes are Not the Only Carbon 10. Strain Measurement and Damage Detection using Integrated Carbon Nanotube Yarn Sensors 11. CNT/CF hybrid composites 12. 3D Textile and Foam Structures Enhanced by Aligned Carbon Nanotube Sheets13. CNT Sheet for Multi-Purpose Composite Materials and Textiles 14. Wearable NanoSensors Part 3. Electrical Conductors and Electronics15. Ultrawire new electrical conductor 16. Carbon Nanotube Electrical Conductors 17. Conductivity Mechanisms in CNT Yarns 18. Electromagnetic Simulation and Measurement of Carbon Nanotube Thread and Sheet Antennas 19. Development of Long Length Electrical Conductors Incorporating Nanotechnology: Carbon-Based and Superconducting 20. Electrical Conduction in Cu-Carbon Nanotube Fibers 21. Nanomagnetics for Power Applications 22. High Rate Manufacturing of Hybrid Cu-CNT Electrical ConductorsPart 4. Environmental, Biomedical, Thermal, and Space Applications23. High-efficiency Particulate Air Filters Based on Carbon Nanotubes 24. Water Filtering using Carbon Nanotube Sheets 25. Nanoengineering Materials for Heat Dissipation 26. Carbon Electric Motors 27. Heatable Carbon Nanotube Filters 28. Interplanetary NanoManufacturing Utilizing In-Situ Resources29. Medical Applications of Nanotube Materials Part 5. Energy30. Recent Advances in Boron Nitride Nanotubes: Manufacturing, Chemistry, Composites and Applications 31. Autonomous Research Systems for Carbon Nanotube Synthesis 32. Multidimensional and Multifunctional Graphitic Carbon Nanomaterials for Energy Conversion and Storage 33. Fluidized-Bed Production of Sub-Millimeter-Long Carbon Nanotubes and Their Application to Electrochemical Energy Storage Devices34. Energy Storage using Graphene and Carbon Nanotubes 35. Graphene: Large scale manufacturing and development of multifunctional materials

Mark J. Schulz is a Professor of Mechanical and Materials Engineering at the University of Cincinnati, and Co-director of the Nanoworld Laboratories at the University of Cincinnati. The strategic goal of the Nanoworld Labs is to solve societally important and complex problems, to integrate nanotech into university-wide curricula, to interest students to go to graduate school, and to develop new smart and nano materials and devices for engineering and medical use. Mark is a co-founder of two companies based on university technologies. Vesselin Shanov is a Professor of Chemical and Materials Engineering at the University of Cincinnati. He has received several prestigious awards including the Fulbright Award for Research and Teaching in the USA, and German Academic Foundation (DAAD) Grants. His recent research focuses on synthesis, characterization and processing of carbon nanotubes and graphene, with applications in the areas of energy storage, electronics and aerospace. He is a member of the Materials Research Society and co-founder and co-director of the teaching and research facility NANOWORLD Labs at the University of Cincinnati. Dr. Shanov has more than 300 scientific publications, including 16 patents, 12 provisional patents and 5 books, has been cited in about 3,100 different references. Zhangzhang (John) Yin is a Lead Chemist at Ecolab Inc. Previously he worked as the program manager at the NSF Engineering Research Center for Revolutionizing Metallic Biomaterials and Lab Manager in the Nanoworld Lab at the University of Cincinnati. Dr. Yin’s research interest includes corrosion, application of nanotechnology in medicine and water treatment. Dr. Yin received his B.S. from Tongji University and Ph.D. from the University of Cincinnati in Materials Engineering. Marc Cahay is a Professor and Department Head in the Department of Electrical and Computer Engineering at the University of Cincinnati. His current research interests include modeling of nanoscale devices, spintronics, experimental investigation of mesoscopic systems, vacuum micro- and nano-electronics, and organic light-emitting diodes. He has published over 140 journal articles in these areas. With Supriyo Bandyopadhyay, he has co-authored a textbook on an Introduction to Spintronics (CRC Press, Boca Raton, 2008) and a collection of Problems in Quantum Mechanics for Material Scientists, Applied Physicists, and Device Engineers (Wiley, 2017). He is a Fellow of ECS (Electrochemical Society), IEEE, (APS) American Physical Society, and AAAS (American Association for the Advancement of Science).

• 1. NNI 2.0 – Future Directions and Opportunities under the National Nanotechnology Initiative Part 1. Sensors and Devices2. Nanotubes for Sensing 3. Sheath-Core Conducting Fibers for Weavable Superelastic Wires, Biosensors, Supercapacitors, Strain Sensors, and Artificial Muscles 4. Creation of CNT junctions for 3D structures and virus isolation using VA-CNTs 5. Science and Application of sp2-Bonded Nanomaterials6. Nanostructured Cathode and Anode Materials for Vacuum Electronic Devices 7. Nano-Imprint Lithography for Tiny Devices 8. Nanotube Fiber Sensors for Heavy Metals in Liquids Part 2. Composite Materials and Textiles9. Nanotubes are Not the Only Carbon 10. Strain Measurement and Damage Detection using Integrated Carbon Nanotube Yarn Sensors 11. CNT/CF hybrid composites 12. 3D Textile and Foam Structures Enhanced by Aligned Carbon Nanotube Sheets13. CNT Sheet for Multi-Purpose Composite Materials and Textiles 14. Wearable NanoSensors Part 3. Electrical Conductors and Electronics15. Ultrawire new electrical conductor 16. Carbon Nanotube Electrical Conductors 17. Conductivity Mechanisms in CNT Yarns 18. Electromagnetic Simulation and Measurement of Carbon Nanotube Thread and Sheet Antennas 19. Development of Long Length Electrical Conductors Incorporating Nanotechnology: Carbon-Based and Superconducting 20. Electrical Conduction in Cu-Carbon Nanotube Fibers 21. Nanomagnetics for Power Applications 22. High Rate Manufacturing of Hybrid Cu-CNT Electrical ConductorsPart 4. Environmental, Biomedical, Thermal, and Space Applications23. High-efficiency Particulate Air Filters Based on Carbon Nanotubes 24. Water Filtering using Carbon Nanotube Sheets 25. Nanoengineering Materials for Heat Dissipation 26. Carbon Electric Motors 27. Heatable Carbon Nanotube Filters 28. Interplanetary NanoManufacturing Utilizing In-Situ Resources29. Medical Applications of Nanotube Materials Part 5. Energy30. Recent Advances in Boron Nitride Nanotubes: Manufacturing, Chemistry, Composites and Applications 31. Autonomous Research Systems for Carbon Nanotube Synthesis 32. Multidimensional and Multifunctional Graphitic Carbon Nanomaterials for Energy Conversion and Storage 33. Fluidized-Bed Production of Sub-Millimeter-Long Carbon Nanotubes and Their Application to Electrochemical Energy Storage Devices34. Energy Storage using Graphene and Carbon Nanotubes 35. Graphene: Large scale manufacturing and development of multifunctional materials