Dr. KV Sunooj has more than 16 years of experience teaching and conducting research in the area of food technology. He obtained a master's degree from the University of Calicut in 2003 and a PhD from the Defence Food Research laboratory (Ministry of Defence, DRDO), Mysore (Awarded by University of Mysore). He started his career as a Lecturer at the University of Calicut, Kerala, India. After completing his Ph.D., he joined as an Assistant professor at the Department of Food Science and Technology, Pondicherry University in 2009. Dr. Sunooj’s teaching and research interests are in the area of Food material Science, Biopolymers, and Non-conventional starch. He has more than 100 international publications, including book chapters. He is a member of several international associations, a member of the governing body and research council member of Amala Cancer Research Center, Kerala, and a member of the board of studies at the University of Calicut. Maximilian Lackner, a chemical engineer, has been lecturer at Vienna University of Technology (VUT) since 2005, at JKU (Linz, Austria) since 2014 and at the University of Applied Sciences Technikum Wien since 2015, with additional teaching assignments at Aracada University of Applied Sciences (Finland), Junia University of Applied Sciences (France), Xidian University (China) and Faculty of Management at Comenius University in Bratislava (Slovakia). He studied Technical Chemistry at VUT, where he also earned his PhD degree in 2003 and completed his habilitation in chemical engineering in 2009. He obtained a Global Executive MBA from LIMAK University in Linz, Austria. He is a member of ASME and the Austrian Chemical Society. Prof. Lackner serves as a reviewer for the European Commission and several journals. He has won several awards and published over 200 articles.Dr. Johnsy George is presently working as Scientist ‘F’ in the Food Engineering & Packaging Technology Division of Defence Food Research Laboratory, DRDO, Mysore. He obtained a B. Tech in Polymer Engineering from Mahatma Gandhi University, Kottayam, and a Ph.D. in Polymer Science and Technology from Visvesvaraya Technological University, Belgaum, Karnataka. He had published 6 book chapters and 68 international research publications and got three patents to his credit. He also delivered an invited lecture at Chonbuk national university, South Korea, and had undergone training in twin screw polymer extrusion in Ebersberg, Germany. He was also a member of the FSSAI panel on Food Packaging, BOS of Mysore University, and various other scientific bodies in the area of food packaging.

• Section 1: Starch nanoparticles and properties1. Introduction to Starch Nanoparticles2. Synthesis of Starch Nanoparticle3. Morphology of Starch Nanoparticle4. Physical properties of Starch Nanoparticle5. Functionalization of Starch Nanoparticlesa. Surface Modificationb. Chemical Functionalizationc. Biocompatibility and Toxicity StudiesSection 2: Applications of Starch Nanoparticles6. Polymer nanocomposites using Starch Nanoparticles7. Biomedical and Pharmaceutical Applications of Starch Nanoparticles8. Application of Starch Nanoparticles in the food industry9. Application of Starch Nanoparticles in Cosmetics, and Environmental Remediation

Dr. KV Sunooj has more than 16 years of experience teaching and conducting research in the area of food technology. He obtained a master's degree from the University of Calicut in 2003 and a PhD from the Defence Food Research laboratory (Ministry of Defence, DRDO), Mysore (Awarded by University of Mysore). He started his career as a Lecturer at the University of Calicut, Kerala, India. After completing his Ph.D., he joined as an Assistant professor at the Department of Food Science and Technology, Pondicherry University in 2009. Dr. Sunooj’s teaching and research interests are in the area of Food material Science, Biopolymers, and Non-conventional starch. He has more than 100 international publications, including book chapters. He is a member of several international associations, a member of the governing body and research council member of Amala Cancer Research Center, Kerala, and a member of the board of studies at the University of Calicut. Maximilian Lackner, a chemical engineer, has been lecturer at Vienna University of Technology (VUT) since 2005, at JKU (Linz, Austria) since 2014 and at the University of Applied Sciences Technikum Wien since 2015, with additional teaching assignments at Aracada University of Applied Sciences (Finland), Junia University of Applied Sciences (France), Xidian University (China) and Faculty of Management at Comenius University in Bratislava (Slovakia). He studied Technical Chemistry at VUT, where he also earned his PhD degree in 2003 and completed his habilitation in chemical engineering in 2009. He obtained a Global Executive MBA from LIMAK University in Linz, Austria. He is a member of ASME and the Austrian Chemical Society. Prof. Lackner serves as a reviewer for the European Commission and several journals. He has won several awards and published over 200 articles.Dr. Johnsy George is presently working as Scientist ‘F’ in the Food Engineering & Packaging Technology Division of Defence Food Research Laboratory, DRDO, Mysore. He obtained a B. Tech in Polymer Engineering from Mahatma Gandhi University, Kottayam, and a Ph.D. in Polymer Science and Technology from Visvesvaraya Technological University, Belgaum, Karnataka. He had published 6 book chapters and 68 international research publications and got three patents to his credit. He also delivered an invited lecture at Chonbuk national university, South Korea, and had undergone training in twin screw polymer extrusion in Ebersberg, Germany. He was also a member of the FSSAI panel on Food Packaging, BOS of Mysore University, and various other scientific bodies in the area of food packaging.

• Section 1: Starch nanoparticles and properties1. Introduction to Starch Nanoparticles2. Synthesis of Starch Nanoparticle3. Morphology of Starch Nanoparticle4. Physical properties of Starch Nanoparticle5. Functionalization of Starch Nanoparticlesa. Surface Modificationb. Chemical Functionalizationc. Biocompatibility and Toxicity StudiesSection 2: Applications of Starch Nanoparticles6. Polymer nanocomposites using Starch Nanoparticles7. Biomedical and Pharmaceutical Applications of Starch Nanoparticles8. Application of Starch Nanoparticles in the food industry9. Application of Starch Nanoparticles in Cosmetics, and Environmental Remediation

Dr. KV Sunooj has more than 16 years of experience teaching and conducting research in the area of food technology. He obtained a master's degree from the University of Calicut in 2003 and a PhD from the Defence Food Research laboratory (Ministry of Defence, DRDO), Mysore (Awarded by University of Mysore). He started his career as a Lecturer at the University of Calicut, Kerala, India. After completing his Ph.D., he joined as an Assistant professor at the Department of Food Science and Technology, Pondicherry University in 2009. Dr. Sunooj’s teaching and research interests are in the area of Food material Science, Biopolymers, and Non-conventional starch. He has more than 100 international publications, including book chapters. He is a member of several international associations, a member of the governing body and research council member of Amala Cancer Research Center, Kerala, and a member of the board of studies at the University of Calicut. Maximilian Lackner, a chemical engineer, has been lecturer at Vienna University of Technology (VUT) since 2005, at JKU (Linz, Austria) since 2014 and at the University of Applied Sciences Technikum Wien since 2015, with additional teaching assignments at Aracada University of Applied Sciences (Finland), Junia University of Applied Sciences (France), Xidian University (China) and Faculty of Management at Comenius University in Bratislava (Slovakia). He studied Technical Chemistry at VUT, where he also earned his PhD degree in 2003 and completed his habilitation in chemical engineering in 2009. He obtained a Global Executive MBA from LIMAK University in Linz, Austria. He is a member of ASME and the Austrian Chemical Society. Prof. Lackner serves as a reviewer for the European Commission and several journals. He has won several awards and published over 200 articles.Dr. Johnsy George is presently working as Scientist ‘F’ in the Food Engineering & Packaging Technology Division of Defence Food Research Laboratory, DRDO, Mysore. He obtained a B. Tech in Polymer Engineering from Mahatma Gandhi University, Kottayam, and a Ph.D. in Polymer Science and Technology from Visvesvaraya Technological University, Belgaum, Karnataka. He had published 6 book chapters and 68 international research publications and got three patents to his credit. He also delivered an invited lecture at Chonbuk national university, South Korea, and had undergone training in twin screw polymer extrusion in Ebersberg, Germany. He was also a member of the FSSAI panel on Food Packaging, BOS of Mysore University, and various other scientific bodies in the area of food packaging.

• Section 1: Starch nanoparticles and properties1. Introduction to Starch Nanoparticles2. Synthesis of Starch Nanoparticle3. Morphology of Starch Nanoparticle4. Physical properties of Starch Nanoparticle5. Functionalization of Starch Nanoparticlesa. Surface Modificationb. Chemical Functionalizationc. Biocompatibility and Toxicity StudiesSection 2: Applications of Starch Nanoparticles6. Polymer nanocomposites using Starch Nanoparticles7. Biomedical and Pharmaceutical Applications of Starch Nanoparticles8. Application of Starch Nanoparticles in the food industry9. Application of Starch Nanoparticles in Cosmetics, and Environmental Remediation