Dr. Augustine O. Ayeni is an Associate Professor of chemical engineering at Covenant University, where was head of the Department of Chemical Engineering from 2018-2021. He has more than 16 years of university teaching and research experience in Nigeria, India, and South Africa. His research specialization and interests include biochemical engineering, environmental engineering, corrosion control, chemical kinetics and reaction engineering, bioresource engineering, and energy/bioenergy engineering. Dr. Ayeni is a Registered Engineer (R.Eng) with the Council of Regulation of Engineering in Nigeria and a member of the Nigerian Society of Engineers and the South African Institute of Chemical Engineers. He has contributed substantially to the advancement of chemical engineering and applied sciences through the publications of over 80 peer—reviewed articles including books, book chapters, journal articles, and conference papers. He has supervised many undergraduate and postgraduate students research projects. He is the co-editor of the book Valorization of Biomass to Value-Added Commodities: Current Trends, Challenges, and Future Prospects (Springer, 2020). He is a frequent reviewer for many high-impact scientific journals and the National Research Foundation (NRF) of South Africa. Dr. Olagoke Oladokun is a Senior Lecturer in the Department of Chemical Engineering at Covenant University. His research interests include empirical and mathematical modeling and simulation and their application to chemical, energy, biological and social systems for optimization, automation, and control. Over time, his research has focused on green energy and cleaner fuel in the production of biohydrogen from lignocellulose waste using thermochemical conversion processes specifically pyrolysis, with a focus on multiphase mathematical modeling and simulation in computational fluid dynamics (CFD) optimal design and operation. While still searching for the future green fuel, Dr. Oladokun has worked with a team on the removal of CO2 from natural gas (NG). He has also led a team in the empirical instrumentation and mathematical modeling and optimization of the pressure swing adsorption (PSA) process for the removal of CO2. He has also worked on projects involving modeling of bubble formation during acoustic cavitation and the application as a process intensifier in the separation of azeotrope mixture and energy source from the bubble collapse. He has a future interest in real-time systems and dynamic study using the Internet of Things (IoT), remote sensing process through sensors, and drone surveillance using C, C++, and Python for real-time machine learning and optimization application for a cleaner environment, public health, agricultural farms, high-risk chemical plants, and crowd control and security. Professor Oyinkepreye D. Orodu is a Professor in the Department of Petroleum Engineering at Covenant University and has variedoil and gas industry experience spanning field operations and academia. He holds a bachelor's degree in chemical engineering from the University of Port Harcourt, a master's in oil and gas engineering from Robert Gordon University, and a doctorate in oil and natural gas engineering from the China University of Geosciences. He has undertaken reservoir studies of oil fields in East Asia and is actively engaged in the World Bank’s Africa Center of Excellence in Oilfield Chemicals Research (ACE-CEFOR) at the University of Port Harcourt. His core competence areas are petroleum reservoir engineering and characterization, reservoir fluid characterization, and energy economics. Professor Orodu has authored and co-authored over 70 articles and is a reviewer for high-impact international journals. He is an active researcher and heads a research cluster on petroleum reservoir and production technology. He is a member of the Society of Petroleum Engineers (SPE) and the American Association of Petroleum Geologists (AAPG), and a registered engineer (R.Eng., COREN) in Nigeria.

• Section A: Design and Application of Process Systems.- Nanotechnology: Applications, Challenges, and Prospects.- Development of Energy Efficient Processes and Products From Renewable and Nonrenewable Resources in Nigeria.- an Overview Application of Natural Oil as a Sustainable Plasticizer in the Production of Biopolymers.- Manufacturing of Brake Pad Using Aluminium Silicon Carbide Reinforced With Alumina for Automobile Industry.- Overview of Nanofluid Applications and Their Sustainability.- Enhancing the Rheology of Water-based Mud Using Micronized Starch.-influence of Cutting Fluid on Machining Processes.- Nanofluid- a Sustainable Alternative Coolant for Metal Working and Machining Operations.- the Essence of Intermetallic Phases in AA6061/Clay Composites.- Section B: Pollution Control and Management.- Public-private Initiatives: a Remedy for Environmental Pollution and Infrastructural Degeneration in Nigeria.- Smart Toilets and Toilet Gadgets in Sustainable Smart Cities: An Overviewof Personal Health Monitoring.- Biomedical Engineering Education: Equipment, Prospect, and Challenges for Environmental Healthcare in Nigeria.- Inhibition Performance of Admixed Grapefruit and Lemongrass Oil Extracts as Low Carbon Steel in Weak Acid Formulation.- Corrosion Inhibitive Behaviour of Moringa Oleifera in Acidic Medium.- Phosphating Technique: a Reliable Approach to Corrosion Resistance of A36 Mild Steel.- Environmental Process Engineering for Public Health and Sustainable Development.- Adsorptive Performance of Immobilized Activated Carbon for Effective Removal of Dibenzothiophene From a Synthetic Petroleum Distillate in a Packed-bed Column.- Sustainable Waste Management Towards Circular Economy in Nigeria Context: Challenges, Prospects and Way Forward.- Biomedical Waste Management Practices in Sub-saharan Africa: Insights of Its Impacts and Strategies for Its Mitigation.- Bioplastic, a Sustainable Remedy to Manage Environmental Waste.- Section C: Process Modeling and Simulation.- Design of Water Retaining Structures and Application of Process Engineering for Sustainable Environment.- Development of Robust Fractional Order Controllers to Provide Effective Economic Load Dispatch Management in an Interconnected Area Network.- Digital Technology and Sustainable Manufacturing: The Nexus.

Dr. Augustine O. Ayeni is an Associate Professor of chemical engineering at Covenant University, where was head of the Department of Chemical Engineering from 2018-2021. He has more than 16 years of university teaching and research experience in Nigeria, India, and South Africa. His research specialization and interests include biochemical engineering, environmental engineering, corrosion control, chemical kinetics and reaction engineering, bioresource engineering, and energy/bioenergy engineering. Dr. Ayeni is a Registered Engineer (R.Eng) with the Council of Regulation of Engineering in Nigeria and a member of the Nigerian Society of Engineers and the South African Institute of Chemical Engineers. He has contributed substantially to the advancement of chemical engineering and applied sciences through the publications of over 80 peer—reviewed articles including books, book chapters, journal articles, and conference papers. He has supervised many undergraduate and postgraduate students research projects. He is the co-editor of the book Valorization of Biomass to Value-Added Commodities: Current Trends, Challenges, and Future Prospects (Springer, 2020). He is a frequent reviewer for many high-impact scientific journals and the National Research Foundation (NRF) of South Africa. Dr. Olagoke Oladokun is a Senior Lecturer in the Department of Chemical Engineering at Covenant University. His research interests include empirical and mathematical modeling and simulation and their application to chemical, energy, biological and social systems for optimization, automation, and control. Over time, his research has focused on green energy and cleaner fuel in the production of biohydrogen from lignocellulose waste using thermochemical conversion processes specifically pyrolysis, with a focus on multiphase mathematical modeling and simulation in computational fluid dynamics (CFD) optimal design and operation. While still searching for the future green fuel, Dr. Oladokun has worked with a team on the removal of CO2 from natural gas (NG). He has also led a team in the empirical instrumentation and mathematical modeling and optimization of the pressure swing adsorption (PSA) process for the removal of CO2. He has also worked on projects involving modeling of bubble formation during acoustic cavitation and the application as a process intensifier in the separation of azeotrope mixture and energy source from the bubble collapse. He has a future interest in real-time systems and dynamic study using the Internet of Things (IoT), remote sensing process through sensors, and drone surveillance using C, C++, and Python for real-time machine learning and optimization application for a cleaner environment, public health, agricultural farms, high-risk chemical plants, and crowd control and security. Professor Oyinkepreye D. Orodu is a Professor in the Department of Petroleum Engineering at Covenant University and has variedoil and gas industry experience spanning field operations and academia. He holds a bachelor's degree in chemical engineering from the University of Port Harcourt, a master's in oil and gas engineering from Robert Gordon University, and a doctorate in oil and natural gas engineering from the China University of Geosciences. He has undertaken reservoir studies of oil fields in East Asia and is actively engaged in the World Bank’s Africa Center of Excellence in Oilfield Chemicals Research (ACE-CEFOR) at the University of Port Harcourt. His core competence areas are petroleum reservoir engineering and characterization, reservoir fluid characterization, and energy economics. Professor Orodu has authored and co-authored over 70 articles and is a reviewer for high-impact international journals. He is an active researcher and heads a research cluster on petroleum reservoir and production technology. He is a member of the Society of Petroleum Engineers (SPE) and the American Association of Petroleum Geologists (AAPG), and a registered engineer (R.Eng., COREN) in Nigeria.

• Section A: Design and Application of Process Systems.- Nanotechnology: Applications, Challenges, and Prospects.- Development of Energy Efficient Processes and Products From Renewable and Nonrenewable Resources in Nigeria.- an Overview Application of Natural Oil as a Sustainable Plasticizer in the Production of Biopolymers.- Manufacturing of Brake Pad Using Aluminium Silicon Carbide Reinforced With Alumina for Automobile Industry.- Overview of Nanofluid Applications and Their Sustainability.- Enhancing the Rheology of Water-based Mud Using Micronized Starch.-influence of Cutting Fluid on Machining Processes.- Nanofluid- a Sustainable Alternative Coolant for Metal Working and Machining Operations.- the Essence of Intermetallic Phases in AA6061/Clay Composites.- Section B: Pollution Control and Management.- Public-private Initiatives: a Remedy for Environmental Pollution and Infrastructural Degeneration in Nigeria.- Smart Toilets and Toilet Gadgets in Sustainable Smart Cities: An Overviewof Personal Health Monitoring.- Biomedical Engineering Education: Equipment, Prospect, and Challenges for Environmental Healthcare in Nigeria.- Inhibition Performance of Admixed Grapefruit and Lemongrass Oil Extracts as Low Carbon Steel in Weak Acid Formulation.- Corrosion Inhibitive Behaviour of Moringa Oleifera in Acidic Medium.- Phosphating Technique: a Reliable Approach to Corrosion Resistance of A36 Mild Steel.- Environmental Process Engineering for Public Health and Sustainable Development.- Adsorptive Performance of Immobilized Activated Carbon for Effective Removal of Dibenzothiophene From a Synthetic Petroleum Distillate in a Packed-bed Column.- Sustainable Waste Management Towards Circular Economy in Nigeria Context: Challenges, Prospects and Way Forward.- Biomedical Waste Management Practices in Sub-saharan Africa: Insights of Its Impacts and Strategies for Its Mitigation.- Bioplastic, a Sustainable Remedy to Manage Environmental Waste.- Section C: Process Modeling and Simulation.- Design of Water Retaining Structures and Application of Process Engineering for Sustainable Environment.- Development of Robust Fractional Order Controllers to Provide Effective Economic Load Dispatch Management in an Interconnected Area Network.- Digital Technology and Sustainable Manufacturing: The Nexus.

Dr. Augustine O. Ayeni is an Associate Professor of chemical engineering at Covenant University, where was head of the Department of Chemical Engineering from 2018-2021. He has more than 16 years of university teaching and research experience in Nigeria, India, and South Africa. His research specialization and interests include biochemical engineering, environmental engineering, corrosion control, chemical kinetics and reaction engineering, bioresource engineering, and energy/bioenergy engineering. Dr. Ayeni is a Registered Engineer (R.Eng) with the Council of Regulation of Engineering in Nigeria and a member of the Nigerian Society of Engineers and the South African Institute of Chemical Engineers. He has contributed substantially to the advancement of chemical engineering and applied sciences through the publications of over 80 peer—reviewed articles including books, book chapters, journal articles, and conference papers. He has supervised many undergraduate and postgraduate students research projects. He is the co-editor of the book Valorization of Biomass to Value-Added Commodities: Current Trends, Challenges, and Future Prospects (Springer, 2020). He is a frequent reviewer for many high-impact scientific journals and the National Research Foundation (NRF) of South Africa. Dr. Olagoke Oladokun is a Senior Lecturer in the Department of Chemical Engineering at Covenant University. His research interests include empirical and mathematical modeling and simulation and their application to chemical, energy, biological and social systems for optimization, automation, and control. Over time, his research has focused on green energy and cleaner fuel in the production of biohydrogen from lignocellulose waste using thermochemical conversion processes specifically pyrolysis, with a focus on multiphase mathematical modeling and simulation in computational fluid dynamics (CFD) optimal design and operation. While still searching for the future green fuel, Dr. Oladokun has worked with a team on the removal of CO2 from natural gas (NG). He has also led a team in the empirical instrumentation and mathematical modeling and optimization of the pressure swing adsorption (PSA) process for the removal of CO2. He has also worked on projects involving modeling of bubble formation during acoustic cavitation and the application as a process intensifier in the separation of azeotrope mixture and energy source from the bubble collapse. He has a future interest in real-time systems and dynamic study using the Internet of Things (IoT), remote sensing process through sensors, and drone surveillance using C, C++, and Python for real-time machine learning and optimization application for a cleaner environment, public health, agricultural farms, high-risk chemical plants, and crowd control and security. Professor Oyinkepreye D. Orodu is a Professor in the Department of Petroleum Engineering at Covenant University and has variedoil and gas industry experience spanning field operations and academia. He holds a bachelor's degree in chemical engineering from the University of Port Harcourt, a master's in oil and gas engineering from Robert Gordon University, and a doctorate in oil and natural gas engineering from the China University of Geosciences. He has undertaken reservoir studies of oil fields in East Asia and is actively engaged in the World Bank’s Africa Center of Excellence in Oilfield Chemicals Research (ACE-CEFOR) at the University of Port Harcourt. His core competence areas are petroleum reservoir engineering and characterization, reservoir fluid characterization, and energy economics. Professor Orodu has authored and co-authored over 70 articles and is a reviewer for high-impact international journals. He is an active researcher and heads a research cluster on petroleum reservoir and production technology. He is a member of the Society of Petroleum Engineers (SPE) and the American Association of Petroleum Geologists (AAPG), and a registered engineer (R.Eng., COREN) in Nigeria.

• Section A: Design and Application of Process Systems.- Nanotechnology: Applications, Challenges, and Prospects.- Development of Energy Efficient Processes and Products From Renewable and Nonrenewable Resources in Nigeria.- an Overview Application of Natural Oil as a Sustainable Plasticizer in the Production of Biopolymers.- Manufacturing of Brake Pad Using Aluminium Silicon Carbide Reinforced With Alumina for Automobile Industry.- Overview of Nanofluid Applications and Their Sustainability.- Enhancing the Rheology of Water-based Mud Using Micronized Starch.-influence of Cutting Fluid on Machining Processes.- Nanofluid- a Sustainable Alternative Coolant for Metal Working and Machining Operations.- the Essence of Intermetallic Phases in AA6061/Clay Composites.- Section B: Pollution Control and Management.- Public-private Initiatives: a Remedy for Environmental Pollution and Infrastructural Degeneration in Nigeria.- Smart Toilets and Toilet Gadgets in Sustainable Smart Cities: An Overviewof Personal Health Monitoring.- Biomedical Engineering Education: Equipment, Prospect, and Challenges for Environmental Healthcare in Nigeria.- Inhibition Performance of Admixed Grapefruit and Lemongrass Oil Extracts as Low Carbon Steel in Weak Acid Formulation.- Corrosion Inhibitive Behaviour of Moringa Oleifera in Acidic Medium.- Phosphating Technique: a Reliable Approach to Corrosion Resistance of A36 Mild Steel.- Environmental Process Engineering for Public Health and Sustainable Development.- Adsorptive Performance of Immobilized Activated Carbon for Effective Removal of Dibenzothiophene From a Synthetic Petroleum Distillate in a Packed-bed Column.- Sustainable Waste Management Towards Circular Economy in Nigeria Context: Challenges, Prospects and Way Forward.- Biomedical Waste Management Practices in Sub-saharan Africa: Insights of Its Impacts and Strategies for Its Mitigation.- Bioplastic, a Sustainable Remedy to Manage Environmental Waste.- Section C: Process Modeling and Simulation.- Design of Water Retaining Structures and Application of Process Engineering for Sustainable Environment.- Development of Robust Fractional Order Controllers to Provide Effective Economic Load Dispatch Management in an Interconnected Area Network.- Digital Technology and Sustainable Manufacturing: The Nexus.