Dr. Kavindra Kumar Kesari is a Senior Researcher, Aalto University, Espoo, Finland. Previously, he worked as a Researcher at VTT Technical Research Center of Finland, Espoo, Finland. Also, as a Postdoctoral Researcher at the University of Helsinki, and University of Eastern Finland, Kuopio, Finland (since 2013). He also served as an Associate Professor at Lovely Professional University, Punjab and Full Professor at Chandigarh University, Punjab in recent years. He is actively involved in material-based research on biomaterials, hybrid materials and cancer research. He has published over 150 papers (H-index 52: Google Scholar as of November 2025) in reputed scientific journals, 30 book chapters, and 7 books, and has presented over 50 papers at national and international scientific meetings. He is listed in the Top 2% world’s leading scientists published by Stanford University and Elsevier. Also acting as a visiting fellow for INTI International University, Malaysia and Adjunct Professor for Chandigarh University, Mohali, India. He received four times Young Scientist Award for his outstanding contribution to research.Dr. Vishnu D. Rajput working as Head of “Soil Health Lab” at Southern Federal University, Rostov-on-Don, Russia. His research of research is how nanoparticles/heavy metals interact with plants, soil, microbial community, and the larger environment as well as possible remediation technology using nanoparticles/nano-biochar. He has published 331 scientific publications, 70 chapters, 18 books, H-Index: 37. He is an internationally recognized reviewer, received an Outstanding Reviewing Certificate by Elsevier and Springer. He is Editorial Board Member of various high-impacted journals such as biochar. He has also received “Highly Qualified Specialist” status by the Russian government. In year 2023, he is included in the list of 2% world’s potential scientists by Elsevier BV publishing house.Prof. Chander Prakash is Professor and Project Head at Research Laboratory of 3D Bioprinting Technologies for Flexible Electronics, Institute of Nanotechnology, Electronic and Equipment Engineering, Southern Federal University, Taganrog, Russian. He is Passionate Researcher with diversified research interests—developing materials for biomedical and healthcare applications, additive manufacturing, and developing and exploring new cost-effective manufacturing technologies for biomedical industries. To date, he has published more than 386 scientific articles in various peer-reviewed, reputed top-notch journals, conferences, and books in Materials Science and Manufacturing. He is Highly Cited Researcher at the international level, and he has 17300 citations, an H-index of 73, and an i-10 index is 298. He edited/authored 35 books, serving as Series Editor of 3 books, Editorial Board Member of journals. He is among India’s Top 1% of leading mechanical and aerospace engineering scientists, as per Research.com. He holds the 38th rank in India and 1,590th rank in the world. He also consistently appeared in the top 2% of researchers as per Stanford Study in 2021, 2022, 2023, and 2024.

• Introduction.- Sustainable development towards 3D printing replacing agriculture waste.- Sustainable cellulose films as packaging (coating) materials to reduce plastic use.- Recovery of energy or nutrients from natural resources, biomass, and solid wastes.- Wood and harvested crop straws for 3D printing and greener solutions.- Replacing plastic with cellulose film-based plastic towards greener solutions.- Utilizing modern technology for on-farm planning and production efficiency (crop identification, environmental effect, energy efficiency, adoption studies, and socioeconomic evaluation).- Technologies for Sustainable Agricultural Development.- Smart farming technologies for sustainable agricultural development: crops to cattle.- Concluding remarks and future perspectives.

Dr. Kavindra Kumar Kesari is a Senior Researcher, Aalto University, Espoo, Finland. Previously, he worked as a Researcher at VTT Technical Research Center of Finland, Espoo, Finland. Also, as a Postdoctoral Researcher at the University of Helsinki, and University of Eastern Finland, Kuopio, Finland (since 2013). He also served as an Associate Professor at Lovely Professional University, Punjab and Full Professor at Chandigarh University, Punjab in recent years. He is actively involved in material-based research on biomaterials, hybrid materials and cancer research. He has published over 150 papers (H-index 52: Google Scholar as of November 2025) in reputed scientific journals, 30 book chapters, and 7 books, and has presented over 50 papers at national and international scientific meetings. He is listed in the Top 2% world’s leading scientists published by Stanford University and Elsevier. Also acting as a visiting fellow for INTI International University, Malaysia and Adjunct Professor for Chandigarh University, Mohali, India. He received four times Young Scientist Award for his outstanding contribution to research.Dr. Vishnu D. Rajput working as Head of “Soil Health Lab” at Southern Federal University, Rostov-on-Don, Russia. His research of research is how nanoparticles/heavy metals interact with plants, soil, microbial community, and the larger environment as well as possible remediation technology using nanoparticles/nano-biochar. He has published 331 scientific publications, 70 chapters, 18 books, H-Index: 37. He is an internationally recognized reviewer, received an Outstanding Reviewing Certificate by Elsevier and Springer. He is Editorial Board Member of various high-impacted journals such as biochar. He has also received “Highly Qualified Specialist” status by the Russian government. In year 2023, he is included in the list of 2% world’s potential scientists by Elsevier BV publishing house.Prof. Chander Prakash is Professor and Project Head at Research Laboratory of 3D Bioprinting Technologies for Flexible Electronics, Institute of Nanotechnology, Electronic and Equipment Engineering, Southern Federal University, Taganrog, Russian. He is Passionate Researcher with diversified research interests—developing materials for biomedical and healthcare applications, additive manufacturing, and developing and exploring new cost-effective manufacturing technologies for biomedical industries. To date, he has published more than 386 scientific articles in various peer-reviewed, reputed top-notch journals, conferences, and books in Materials Science and Manufacturing. He is Highly Cited Researcher at the international level, and he has 17300 citations, an H-index of 73, and an i-10 index is 298. He edited/authored 35 books, serving as Series Editor of 3 books, Editorial Board Member of journals. He is among India’s Top 1% of leading mechanical and aerospace engineering scientists, as per Research.com. He holds the 38th rank in India and 1,590th rank in the world. He also consistently appeared in the top 2% of researchers as per Stanford Study in 2021, 2022, 2023, and 2024.

• Introduction.- Sustainable development towards 3D printing replacing agriculture waste.- Sustainable cellulose films as packaging (coating) materials to reduce plastic use.- Recovery of energy or nutrients from natural resources, biomass, and solid wastes.- Wood and harvested crop straws for 3D printing and greener solutions.- Replacing plastic with cellulose film-based plastic towards greener solutions.- Utilizing modern technology for on-farm planning and production efficiency (crop identification, environmental effect, energy efficiency, adoption studies, and socioeconomic evaluation).- Technologies for Sustainable Agricultural Development.- Smart farming technologies for sustainable agricultural development: crops to cattle.- Concluding remarks and future perspectives.

Dr. Kavindra Kumar Kesari is a Senior Researcher, Aalto University, Espoo, Finland. Previously, he worked as a Researcher at VTT Technical Research Center of Finland, Espoo, Finland. Also, as a Postdoctoral Researcher at the University of Helsinki, and University of Eastern Finland, Kuopio, Finland (since 2013). He also served as an Associate Professor at Lovely Professional University, Punjab and Full Professor at Chandigarh University, Punjab in recent years. He is actively involved in material-based research on biomaterials, hybrid materials and cancer research. He has published over 150 papers (H-index 52: Google Scholar as of November 2025) in reputed scientific journals, 30 book chapters, and 7 books, and has presented over 50 papers at national and international scientific meetings. He is listed in the Top 2% world’s leading scientists published by Stanford University and Elsevier. Also acting as a visiting fellow for INTI International University, Malaysia and Adjunct Professor for Chandigarh University, Mohali, India. He received four times Young Scientist Award for his outstanding contribution to research.Dr. Vishnu D. Rajput working as Head of “Soil Health Lab” at Southern Federal University, Rostov-on-Don, Russia. His research of research is how nanoparticles/heavy metals interact with plants, soil, microbial community, and the larger environment as well as possible remediation technology using nanoparticles/nano-biochar. He has published 331 scientific publications, 70 chapters, 18 books, H-Index: 37. He is an internationally recognized reviewer, received an Outstanding Reviewing Certificate by Elsevier and Springer. He is Editorial Board Member of various high-impacted journals such as biochar. He has also received “Highly Qualified Specialist” status by the Russian government. In year 2023, he is included in the list of 2% world’s potential scientists by Elsevier BV publishing house.Prof. Chander Prakash is Professor and Project Head at Research Laboratory of 3D Bioprinting Technologies for Flexible Electronics, Institute of Nanotechnology, Electronic and Equipment Engineering, Southern Federal University, Taganrog, Russian. He is Passionate Researcher with diversified research interests—developing materials for biomedical and healthcare applications, additive manufacturing, and developing and exploring new cost-effective manufacturing technologies for biomedical industries. To date, he has published more than 386 scientific articles in various peer-reviewed, reputed top-notch journals, conferences, and books in Materials Science and Manufacturing. He is Highly Cited Researcher at the international level, and he has 17300 citations, an H-index of 73, and an i-10 index is 298. He edited/authored 35 books, serving as Series Editor of 3 books, Editorial Board Member of journals. He is among India’s Top 1% of leading mechanical and aerospace engineering scientists, as per Research.com. He holds the 38th rank in India and 1,590th rank in the world. He also consistently appeared in the top 2% of researchers as per Stanford Study in 2021, 2022, 2023, and 2024.

• Introduction.- Sustainable development towards 3D printing replacing agriculture waste.- Sustainable cellulose films as packaging (coating) materials to reduce plastic use.- Recovery of energy or nutrients from natural resources, biomass, and solid wastes.- Wood and harvested crop straws for 3D printing and greener solutions.- Replacing plastic with cellulose film-based plastic towards greener solutions.- Utilizing modern technology for on-farm planning and production efficiency (crop identification, environmental effect, energy efficiency, adoption studies, and socioeconomic evaluation).- Technologies for Sustainable Agricultural Development.- Smart farming technologies for sustainable agricultural development: crops to cattle.- Concluding remarks and future perspectives.