Institution of Mechanical Engineers – författare

This book presents the papers from the latest international conference, following on from the highly successful previous conferences in this series held regularly since 1978. Papers cover all current and novel aspects of turbocharging systems design for boosting solutions for engine downsizing. The focus of the papers is on the application of turbocharger and other pressure charging devices to spark ignition (SI) and compression ignition (CI) engines in the passenger car and commercial vehicles. Novel boosting solutions for diesel engines operating in the industrial and marine market sectors are also included.The current emission legislations and environmental trends for reducing CO2 and fuel consumption are the major market forces in the transport (land and marine) and industry sectors. In these market sectors the internal combustion engine is the key product where downsizing is the driver for development for both SI and CI engines in the passenger car and commercial vehicle applications. The more stringent future market forces and environmental considerations mean more stringent engine downsizing, thus, novel systems are required to provide boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems for high efficiency, response, reliability, durability and compactness etc. For large engines the big challenge is to enhance the high specific power and efficiency whilst reducing emission levels (Nox and Sox) with variable quality fuels. This will require turbocharging systems for very high boost pressure, efficiency and a high degree of system flexibility.

14th International Conference on Turbochargers and Turbocharging addresses current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The contributions focus on the development of air management solutions and waste heat recovery ideas to support thermal propulsion systems leading to high thermal efficiency and low exhaust emissions. These can be in the form of internal combustion engines or other propulsion technologies (eg. Fuel cell) in both direct drive and hybridised configuration. 14th International Conference on Turbochargers and Turbocharging also provides a particular focus on turbochargers, superchargers, waste heat recovery turbines and related air managements components in both electrical and mechanical forms.

14th International Conference on Turbochargers and Turbocharging addresses current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The contributions focus on the development of air management solutions and waste heat recovery ideas to support thermal propulsion systems leading to high thermal efficiency and low exhaust emissions. These can be in the form of internal combustion engines or other propulsion technologies (eg. Fuel cell) in both direct drive and hybridised configuration. 14th International Conference on Turbochargers and Turbocharging also provides a particular focus on turbochargers, superchargers, waste heat recovery turbines and related air managements components in both electrical and mechanical forms.

This book contains the papers of the Internal Combustion Engines: Performance fuel economy and emissions conference, in the IMechE bi-annual series, held on the 29th and 30th November 2011. The internal combustion engine is produced in tens of millions per year for applications as the power unit of choice in transport and other sectors. It continues to meet both needs and challenges through improvements and innovations in technology and advances from the latest research. These papers set out to meet the challenges of internal combustion engines, which are greater than ever. How can engineers reduce both CO2 emissions and the dependence on oil-derivate fossil fuels? How will they meet the future, more stringent constraints on gaseous and particulate material emissions as set by EU, North American and Japanese regulations? How will technology developments enhance performance and shape the next generation of designs? This conference looks closely at developments for personal transport applications, though many of the drivers of change apply to light and heavy duty, on and off highway, transport and other sectors.

This book presents the papers from the latest conference in this successful series on fuel injection systems for internal combustion engines. It is vital for the automotive industry to continue to meet the demands of the modern environmental agenda. In order to excel, manufacturers must research and develop fuel systems that guarantee the best engine performance, ensuring minimal emissions and maximum profit. The papers from this unique conference focus on the latest technology for state-of-the-art system design, characterisation, measurement, and modelling, addressing all technological aspects of diesel and gasoline fuel injection systems. Topics range from fundamental fuel spray theory, component design, to effects on engine performance, fuel economy and emissions.

This book presents the papers from the Innovations in Fuel Economy and Sustainable Road Transport conference, held in Pune, India, 8-9 November, 2011. Papers examine advances in powertrain, alternative fuels, lightweight vehicles, electric vehicles and hybrid vehicles. An international assembly of senior industry representatives provide insight into research and technological advances in low carbon technology sustainability for road transport, helping towards achieving stringent emissions standards and continual improvements in fuel economy efficiency, all in an expanding Indian market. These technical papers from industry and academia discuss the developments and research of leading organisations.

This book presents the papers from the 10th International Conference on Vibrations in Rotating Machinery. This conference, first held in 1976, has defined and redefined the state-of-the-art in the many aspects of vibration encountered in rotating machinery. Distinguished by an excellent mix of industrial and academic participation achieved, these papers present the latest methods of theoretical, experimental and computational rotordynamics, alongside the current issues of concern in the further development of rotating machines. Topics are aimed at propelling forward the standards of excellence in the design and operation of rotating machines.Presents latest methods of theoretical, experimental and computational rotordynamicsCovers current issues of concern in the further development of rotating machines

This book contains the papers from the IMechE’s Sustainable Vehicle Technologies 2012 conference. An innovative technical conference organised by the Automobile Division of the IMechE, it follows on from the 2009 Low Carbon Vehicle conference, which established a high standard with presentations primarily focussed on powertrain technology. The conference examines the latest advances in technology with a view towards understanding the consequences of carbon dioxide reduction over the entire vehicle lifecycle. Papers cover all aspects of the finite resources available for vehicle production, operation and recycling.

The challenges facing vehicle thermal management continue to increase and optimise thermal energy management must continue as an integral part of any vehicle development programme. VTMS11 covers the latest research and technological advances in industry and academia, automotive and off-highway. Topics addressed include: IC engine thermal loading, exhaust and emissions; HEV, EV and alternative powertrain challenges; Waste heat recovery and thermodynamic efficiency improvement; Cooling systems; Heating, A/C, comfort and climate control; Underhood heat transfer and air flow management; Heat exchange components design, materials and manufacture; Thermal systems analysis, control and integration.

The Institution’s International Conference on Turbochargers and Turbocharging (Twickenham, London, UK, 16-17 May 2023) returns to address the latest advances, research and developments in turbocharging system designs and boosting solutions.This volume presents a peer-reviewed collection of papers which will address current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The latest developments leading to enhanced performance and efficiency, increased durability and reduced emissions in line with meeting Net-Zero and global emissions targets.Topics include: Air management in powertrains: conventional, hybrids, fuel cells and novel configurations Alternate fuels and their needs in boosting (e.g. hydrogen, synthetic fuels) Electrification of turbochargers, compressors, and exhaust turbines Simulation and testing techniques, data analytics, including AI and digital twins Thermal management, waste heat recovery and expanders Turbomachinery aerodynamic: novel compressors & turbines and multi-stage systems. Component fatigue life, bearing design, rotor-dynamics and durability prediction Mechatronics, control, sensors and power electronics High speed turbomachinery in propulsion and power systems Future Legislation needs for thermal propulsion systems

This book presents the papers from the Internal Combustion Engines: Performance, fuel economy and emissions held in London, UK. This popular international conference from the Institution of Mechanical Engineers provides a forum for IC engine experts looking closely at developments for personal transport applications, though many of the drivers of change apply to light and heavy duty, on and off highway, transport and other sectors. These are exciting times to be working in the IC engine field. With the move towards downsizing, advances in FIE and alternative fuels, new engine architectures and the introduction of Euro 6 in 2014, there are plenty of challenges. The aim remains to reduce both CO2 emissions and the dependence on oil-derivate fossil fuels whilst meeting the future, more stringent constraints on gaseous and particulate material emissions as set by EU, North American and Japanese regulations. How will technology developments enhance performance and shape the next generation of designs? The book introduces compression and internal combustion engines' applications, followed by chapters on the challenges faced by alternative fuels and fuel delivery. The remaining chapters explore current improvements in combustion, pollution prevention strategies and data comparisons. Presents the latest requirements and challenges for personal transport applications Gives an insight into the technical advances and research going on in the IC Engines field Provides the latest developments in compression and spark ignition engines for light and heavy-duty applications, automotive and other markets

Major topics addressed include: Engine and engine compartment heat transfer; engine thermal loading; coolants and cooling systems heating, air conditioning and climate control and passenger comfort; heat exchanger developments; air flow management; vehicle thermal system modelling, control and integration; thermal system component; manufacturing and manufacturing processes; fabrication, test and materials development; thermal management implications of: minimising exhaust emissions; reducing power consumption and improving fuel economy; utilising fuel cells, hybrid and alternative power train.

This collection of papers from a prestigious IMechE conference features participation from equipment manufacturers, suppliers, users and research organisations. The papers examine developments in air, gas and refrigeration compressors, vacuum pumps, expanders, related systems and components.

This book contains the papers presented at the IMechE's Internal Combustion Engines: Performance, Fuel Economy and Emissions Conference, held at the IMechE London, 11-12 December 2007.

The papers are arranged under the following headings: Application; FIE hardware; Biofuels; Nozzle flow; Gasoline; Heavy-duty/large engines.

This collection of papers from a prestigious IMechE conference, held in September 2009 in London, features participation from equipment manufacturers, suppliers, users and research organisations. The papers examine developments in air, gas and refrigeration compressors, vacuum pumps, expanders, related systems and components. Major topics (appropriate to compressors and their systems) addressed include: technology development; operation, maintenance and reliability; safety and environmental impact; system integration and behaviour; design and manufacture; legislation; energy efficiency; upgrades and refurbishment.