Michael A Johnson – författare

Control Engineering ""An Introductory Course"" is aimed at second or third year courses in Electrical and Mechanical Engineering, and provides for the needs of these courses without being over-burdened with detail.The authors work in one of the foremost centres in Europe for Control Engineering, and bring both teaching and practical consultancy experience to the text, which links theoretical approaches to actual case histories. Including an introduction to the software tools of MATLAB and SIMULINK, this book also includes simulations and examples throughout, and will give a straightforward and no-nonsense introduction to Control Engineering for students, and those wishing to refresh their knowledge.Accompanying online resources for this title can be found at bloomsburyonlineresources.com/control-engineering. These resources are designed to support teaching and learning when using this textbook and are available at no extra cost.

Do you remember getting up on a Saturday morning to watch Going Live? A time when scrunchies and curtains were the height of cool? Playing Sonic the Hedgehog on your Sega Mega Drive? Then the chances are you were a child in the nineties. This trip down memory lane will jog the memory of even the coolest 30-year-old, and make you long for the days when Gladiators was on the telly and the Spice Girls spiced up your life.

Do you remember trying to solve the Rubik’s cube whilst dressed in your He-Man picture pyjamas?Did you try to make ‘cool’ sound effects with your mouth like Jones from Police Academy?Or maybe you swooned over Scott and Charlene’s (aka Jason and Kylie’s) wedding of the year?If that sounds like you, there’s no mistaking you were a child of the eighties. Rev up your DeLorean, switch on the Flux Capacitor and take a cruise back through the decade that made you the person you are today. This amusing and entertaining collection of reminiscences will jog the memories of all who grew up in the same decade where greed was good, mullets were cool and white dog poo littered the streets.

Control Engineering "An Introductory Course" is aimed at second or third year courses in Electrical and Mechanical Engineering, and provides for the needs of these courses without being over-burdened with detail.The authors work in one of the foremost centres in Europe for Control Engineering, and bring both teaching and practical consultancy experience to the text, which links theoretical approaches to actual case histories. Including an introduction to the software tools of MATLAB and SIMULINK, this book also includes simulations and examples throughout, and will give a straightforward and no-nonsense introduction to Control Engineering for students, and those wishing to refresh their knowledge.

The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology impacts all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies…, new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. The environmental aspects of all of our society’s activities are extremely important if the countryside; the sea and wildernesses are to be fully enjoyed by future generations. Urban waste in all its manifestations presents a particularly difficult disposal problem, which must be tackled conscientiously to prevent long lasting damage to the environment. Technological solutions should be seen as part of the available options. In this monograph, the authors M. R. Katebi, M. A. Johnson and J. Wilkie seek to introduce a comprehensive technological framework to the particular measurement and control problems of wastewater processing plants. Of course the disposal of urban sewage is a long-standing process but past solutions have used options (disposal at sea) which are no longer acceptable. Thus to meet new effluent regulations it is necessary to develop a new technological paradigm based on process control methods, and this is what the authors attempt to provide.

The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology impacts all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies…, new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. The environmental aspects of all of our society’s activities are extremely important if the countryside; the sea and wildernesses are to be fully enjoyed by future generations. Urban waste in all its manifestations presents a particularly difficult disposal problem, which must be tackled conscientiously to prevent long lasting damage to the environment. Technological solutions should be seen as part of the available options. In this monograph, the authors M. R. Katebi, M. A. Johnson and J. Wilkie seek to introduce a comprehensive technological framework to the particular measurement and control problems of wastewater processing plants. Of course the disposal of urban sewage is a long-standing process but past solutions have used options (disposal at sea) which are no longer acceptable. Thus to meet new effluent regulations it is necessary to develop a new technological paradigm based on process control methods, and this is what the authors attempt to provide.

Many large-scale processes like refineries or power generation plant are constructed using the multi-vendor system and a main co-ordinating engineering contractor. With such a methodology. the key process units are installed complete with local proprietary control systems in place. Re-assessing the so called lower level control loop design or structure is becoming less feasible or desirable. Consequently, future comp~titive gains in large-scale industrial systems will arise from the closer and optimised global integration of the process sub-units. This is one of the inherent commercial themes which motivated the research reported in this monograph. To access the efficiency and feasibility of different large-scale system designs, the traditional tool has been the global steady-state analysis and energy balance. The process industries have many such tools encapsu­ lated as proprietary design software. However, to obtain a vital and critical insight into global process operation a dynamic model and simulation is necessary. Over the last decade, the whole state of the art in system simulation has irrevocably changed. The Graphical User Interface (G UI) and icon based simulation approach is now standard with hardware platforms becoming more and more powerful. This immediately opens the way to some new and advanced large-scale dynamic simulation developments. For example, click-together blocks from standard or specialised libraries of process units are perfectly feasible now.

Many large-scale processes like refineries or power generation plant are constructed using the multi-vendor system and a main co-ordinating engineering contractor. With such a methodology. the key process units are installed complete with local proprietary control systems in place. Re-assessing the so called lower level control loop design or structure is becoming less feasible or desirable. Consequently, future comp~titive gains in large-scale industrial systems will arise from the closer and optimised global integration of the process sub-units. This is one of the inherent commercial themes which motivated the research reported in this monograph. To access the efficiency and feasibility of different large-scale system designs, the traditional tool has been the global steady-state analysis and energy balance. The process industries have many such tools encapsu­ lated as proprietary design software. However, to obtain a vital and critical insight into global process operation a dynamic model and simulation is necessary. Over the last decade, the whole state of the art in system simulation has irrevocably changed. The Graphical User Interface (G UI) and icon based simulation approach is now standard with hardware platforms becoming more and more powerful. This immediately opens the way to some new and advanced large-scale dynamic simulation developments. For example, click-together blocks from standard or specialised libraries of process units are perfectly feasible now.

Affirmative legislative action in many countries now requires that public spaces and services be made accessible to disabled people. Although this is often interpreted as access for people with mobility impairments, such legislation also covers those who are hearing or vision impaired. In these cases, it is often the provision of advanced technological devices and aids which enables people with sensory impairments to enjoy the theatre, cinema or a public meeting to the full. Assistive Technology for the Hearin-impaired, Deaf and Deafblind shows the student of rehabilitation technology how this growing technical provision can be used to support those with varying reductions in auditory ability and the deafblind in modern society. Features: instruction in the physiology of the ear together with methods of measurement of hearing levels and loss; the principles of electrical engineering used in assistive technology for the hearing impaired; description and demonstration of electrical engineering used in hearing aids and other communications enhancement technologies; explanation of many devices designed for every-day living in terms of generic electrical engineering; sections of practical projects and investigations which will give the reader ideas for student work and for self teaching. The contributors are internationally recognised experts from the fields of audiology, electrical engineering, signal processing, telephony and assistive technology. Their combined expertise makes Assistive Technology for the Hearing-impaired, Deaf and Deafblind an excellent text for advanced students in assistive and rehabilitation technology and to professional engineers and medics working in assistive technology who wish to maintain an up-to-date knowledge of current engineering advances.

Equal accessibility to public places and services is now required by law in many countries. It is often the use of specialised technology which can provide the vision-impaired with a fuller enjoyment of all the facilities of society. In this volume the engineering and design principles and techniques used in assistive technology for blind and vision-impaired people are explained. Features: instruction in the physiology of the human visual system and methods of measuring visual ability; explanation of many devices designed for every-day living in terms of generic electrical engineering principles; sections of practical projects and investigations which will give the reader ideas for student work and for self teaching; contributions by authors of international repute from divers fields which co-operate under the banner of assistive technology, among them: artificial vision systems; psychology, haptics, electrical engineering, design and visual physiology.

Demand for this book will be generated by the widespread use of PID in industry and because of the modern need for simple control systems to control a wider range of complex industrial processes and systems.

"Process Control Performance Assessment" is a guide to the application of control benchmarking to industrial processes. It presents commercial solutions and techniques still under development and contains real industrial case studies from the oil and gas, power and chemical industries. The effect of benchmarking and control tuning on process performance and revenue optimisation is demonstrated.Practical issues to do with implementing benchmarking algorithms in industrial processes are covered in detail and guidelines for avoiding common problems given. The impact of problems like valve stiction and plant-wide disturbances on process performance is reviewed and methods for diagnosing causative fault conditions suggested.The benefits of using benchmarking techniques for optimising control systems are increased throughput and product quality. The book is appropriate for industrial and academic control and process engineers wishing to learn about methods of benchmarking through directed study or self study.

Equal accessibility to public places and services is now required by law in many countries. It is often the use of specialised technology which can provide the vision-impaired with a fuller enjoyment of all the facilities of society. In this volume the engineering and design principles and techniques used in assistive technology for blind and vision-impaired people are explained. Features: instruction in the physiology of the human visual system and methods of measuring visual ability; explanation of many devices designed for every-day living in terms of generic electrical engineering principles; sections of practical projects and investigations which will give the reader ideas for student work and for self teaching; contributions by authors of international repute from divers fields which co-operate under the banner of assistive technology, among them: artificial vision systems; psychology, haptics, electrical engineering, design and visual physiology.