Lecture Notes in Applied and Computational Mechanics – serie
Visar alla böcker i serien Lecture Notes in Applied and Computational Mechanics. Handla med fri frakt och snabb leverans.
197 produkter
197 produkter
Del 48 - Lecture Notes in Applied and Computational Mechanics
Identification of Damage Using Lamb Waves
From Fundamentals to Applications
Häftad, Engelska, 2012
1 999 kr
Skickas inom 5-8 vardagar
Lamb waves are guided waves that propagate in thin plate or shell structures. There has been a clear increase of interest in using Lamb waves for identifying structural damage, entailing intensive research and development in this field over the past two decades. Now on the verge of maturity for diverse engineering applications, this emerging technique serves as an encouraging candidate for facilitating continuous and automated surveillance of the integrity of engineering structures in a cost-effective manner. In comparison with conventional nondestructive evaluation techniques such as ultrasonic scanning and radiography which have been well developed over half a century, damage identification using Lamb waves is in a stage of burgeoning development, presenting a number of technical challenges in application that need to be addressed and circumvented. It is these two aspects that have encouraged us to write this book, with the intention of consolidating the knowledge and know-how in the field of Lamb-wave-based damage identification, and of promoting widespread attention to mature application of this technique in the practical engineering sphere. This book provides a comprehensive description of key facets of damage identification technique using Lamb waves, based on the authors’ knowledge, comprehension and experience, ranging from fundamental theory through case studies to engineering applications.
Inbunden, Engelska, 2009
2 373 kr
Skickas inom 10-15 vardagar
Lamb waves are guided waves that propagate in thin plate or shell structures. There has been a clear increase of interest in using Lamb waves for identifying structural damage, entailing intensive research and development in this field over the past two decades. Now on the verge of maturity for diverse engineering applications, this emerging technique serves as an encouraging candidate for facilitating continuous and automated surveillance of the integrity of engineering structures in a cost-effective manner. In comparison with conventional nondestructive evaluation techniques such as ultrasonic scanning and radiography which have been well developed over half a century, damage identification using Lamb waves is in a stage of burgeoning development, presenting a number of technical challenges in application that need to be addressed and circumvented. It is these two aspects that have encouraged us to write this book, with the intention of consolidating the knowledge and know-how in the field of Lamb-wave-based damage identification, and of promoting widespread attention to mature application of this technique in the practical engineering sphere. This book provides a comprehensive description of key facets of damage identification technique using Lamb waves, based on the authors’ knowledge, comprehension and experience, ranging from fundamental theory through case studies to engineering applications.
Del 88 - Lecture Notes in Applied and Computational Mechanics
Error Estimates for Advanced Galerkin Methods
Inbunden, Engelska, 2019
1 082 kr
Skickas inom 10-15 vardagar
This monograph provides a compendium of established and novel error estimation procedures applied in the field of Computational Mechanics. It also includes detailed derivations of these procedures to offer insights into the concepts used to control the errors obtained from employing Galerkin methods in finite and linearized hyperelasticity. The Galerkin methods introduced are considered advanced methods because they remedy certain shortcomings of the well-established finite element method, which is the archetypal Galerkin (mesh-based) method. In particular, this monograph focuses on the systematical derivation of the shape functions used to construct both Galerkin mesh-based and meshfree methods. The mesh-based methods considered are the (conventional) displacement-based, (dual-)mixed, smoothed, and extended finite element methods. In addition, it introduces the element-free Galerkin and reproducing kernel particle methods as representatives of a class of Galerkin meshfree methods. Including illustrative numerical examples relevant to engineering with an emphasis on elastic fracture mechanics problems, this monograph is intended for students, researchers, and practitioners aiming to increase the reliability of their numerical simulations and wanting to better grasp the concepts of Galerkin methods and associated error estimation procedures.
Del 87 - Lecture Notes in Applied and Computational Mechanics
Cosserat Continuum Mechanics
With Applications to Granular Media
Häftad, Engelska, 2019
652 kr
Skickas inom 10-15 vardagar
This textbook explores the theory of Cosserat continuum mechanics, and covers fundamental tools, general laws and major models, as well as applications to the mechanics of granular media. While classical continuum mechanics is based on the axiom that the stress tensor is symmetric, theories such as that expressed in the seminal work of the brothers Eugène and François Cosserat are characterized by a non-symmetric stress tensor. The use of von Mises motor mechanics is introduced, for the compact mathematical description of the mechanics and statics of Cosserat continua, as the Cosserat continuum is a manifold of oriented “rigid particles” with 3 dofs of displacement and 3 dofs of rotation, rather than a manifold of points with 3 dofs of displacement. Here, the analysis is restricted to infinitesimal particle displacements and rotations. This book is intended as a valuable supplement to standard Continuum Mechanics courses, and graduate students as well as researchers in mechanics andapplied mathematics will benefit from its self-contained text, which is enriched by numerous examples and exercises.
Del 89 - Lecture Notes in Applied and Computational Mechanics
Sub-structure Coupling for Dynamic Analysis
Application to Complex Simulation-Based Problems Involving Uncertainty
Inbunden, Engelska, 2019
1 082 kr
Skickas inom 10-15 vardagar
This book combines a model reduction technique with an efficient parametrization scheme for the purpose of solving a class of complex and computationally expensive simulation-based problems involving finite element models. These problems, which have a wide range of important applications in several engineering fields, include reliability analysis, structural dynamic simulation, sensitivity analysis, reliability-based design optimization, Bayesian model validation, uncertainty quantification and propagation, etc. The solution of this type of problems requires a large number of dynamic re-analyses. To cope with this difficulty, a model reduction technique known as substructure coupling for dynamic analysis is considered. While the use of reduced order models alleviates part of the computational effort, their repetitive generation during the simulation processes can be computational expensive due to the substantial computational overhead that arises at the substructure level. Inthis regard, an efficient finite element model parametrization scheme is considered. When the division of the structural model is guided by such a parametrization scheme, the generation of a small number of reduced order models is sufficient to run the large number of dynamic re-analyses. Thus, a drastic reduction in computational effort is achieved without compromising the accuracy of the results. The capabilities of the developed procedures are demonstrated in a number of simulation-based problems involving uncertainty.
Del 89 - Lecture Notes in Applied and Computational Mechanics
Sub-structure Coupling for Dynamic Analysis
Application to Complex Simulation-Based Problems Involving Uncertainty
Häftad, Engelska, 2020
1 082 kr
Skickas inom 10-15 vardagar
This book combines a model reduction technique with an efficient parametrization scheme for the purpose of solving a class of complex and computationally expensive simulation-based problems involving finite element models. These problems, which have a wide range of important applications in several engineering fields, include reliability analysis, structural dynamic simulation, sensitivity analysis, reliability-based design optimization, Bayesian model validation, uncertainty quantification and propagation, etc. The solution of this type of problems requires a large number of dynamic re-analyses. To cope with this difficulty, a model reduction technique known as substructure coupling for dynamic analysis is considered. While the use of reduced order models alleviates part of the computational effort, their repetitive generation during the simulation processes can be computational expensive due to the substantial computational overhead that arises at the substructure level. Inthis regard, an efficient finite element model parametrization scheme is considered. When the division of the structural model is guided by such a parametrization scheme, the generation of a small number of reduced order models is sufficient to run the large number of dynamic re-analyses. Thus, a drastic reduction in computational effort is achieved without compromising the accuracy of the results. The capabilities of the developed procedures are demonstrated in a number of simulation-based problems involving uncertainty.
Del 90 - Lecture Notes in Applied and Computational Mechanics
Isogeometric Boundary Element Method
Inbunden, Engelska, 2019
1 082 kr
Skickas inom 10-15 vardagar
This book discusses the introduction of isogeometric technology to the boundary element method (BEM) in order to establish an improved link between simulation and computer aided design (CAD) that does not require mesh generation. In the isogeometric BEM, non-uniform rational B-splines replace the Lagrange polynomials used in conventional BEM. This may seem a trivial exercise, but if implemented rigorously, it has profound implications for the programming, resulting in software that is extremely user friendly and efficient. The BEM is ideally suited for linking with CAD, as both rely on the definition of objects by boundary representation. The book shows how the isogeometric philosophy can be implemented and how its benefits can be maximised with a minimum of user effort. Using several examples, ranging from potential problems to elasticity, it demonstrates that the isogeometric approach results in a drastic reduction in the number of unknowns and an increase in the quality of the results. In some cases even exact solutions without refinement are possible. The book also presents a number of practical applications, demonstrating that the development is not only of academic interest. It then elegantly addresses heterogeneous and non-linear problems using isogeometric concepts, and tests them on several examples, including a severely non-linear problem in viscous flow. The book makes a significant contribution towards a seamless integration of CAD and simulation, which eliminates the need for tedious mesh generation and provides high-quality results with minimum user intervention and computing.
Del 90 - Lecture Notes in Applied and Computational Mechanics
Isogeometric Boundary Element Method
Häftad, Engelska, 2020
921 kr
Skickas inom 10-15 vardagar
This book discusses the introduction of isogeometric technology to the boundary element method (BEM) in order to establish an improved link between simulation and computer aided design (CAD) that does not require mesh generation. In the isogeometric BEM, non-uniform rational B-splines replace the Lagrange polynomials used in conventional BEM. This may seem a trivial exercise, but if implemented rigorously, it has profound implications for the programming, resulting in software that is extremely user friendly and efficient. The BEM is ideally suited for linking with CAD, as both rely on the definition of objects by boundary representation. The book shows how the isogeometric philosophy can be implemented and how its benefits can be maximised with a minimum of user effort. Using several examples, ranging from potential problems to elasticity, it demonstrates that the isogeometric approach results in a drastic reduction in the number of unknowns and an increase in the quality of the results. In some cases even exact solutions without refinement are possible. The book also presents a number of practical applications, demonstrating that the development is not only of academic interest. It then elegantly addresses heterogeneous and non-linear problems using isogeometric concepts, and tests them on several examples, including a severely non-linear problem in viscous flow. The book makes a significant contribution towards a seamless integration of CAD and simulation, which eliminates the need for tedious mesh generation and provides high-quality results with minimum user intervention and computing.
Inbunden, Engelska, 2019
2 158 kr
Skickas inom 10-15 vardagar
This book provides essential insights into recent developments in fundamental geotechnical engineering research. Special emphasis is given to a new family of constitutive soil description methods, which take into account the recent loading history and the dilatancy effects. Particular attention is also paid to the numerical implementation of multi-phase material under dynamic loads, and to geotechnical installation processes. In turn, the book addresses implementation problems concerning large deformations in soils during piling operations or densification processes, and discusses the limitations of the respective methods. Numerical simulations of dynamic consolidation processes are presented in slope stability analysis under seismic excitation. Lastly, achieving the energy transition from conventional to renewable sources will call for geotechnical expertise. Consequently, the book explores and analyzes a selection of interesting problems involving the stability and serviceability ofsupporting structures, and provides new solutions approaches for practitioners and scientists in geotechnical engineering. The content reflects the outcomes of the Colloquium on Geotechnical Engineering 2019 (Geotechnik Kolloquium), held in Karlsruhe, Germany in September 2019.
Del 91 - Lecture Notes in Applied and Computational Mechanics
Recent Developments of Soil Mechanics and Geotechnics in Theory and Practice
Häftad, Engelska, 2020
2 158 kr
Skickas inom 10-15 vardagar
This book provides essential insights into recent developments in fundamental geotechnical engineering research. Special emphasis is given to a new family of constitutive soil description methods, which take into account the recent loading history and the dilatancy effects. Particular attention is also paid to the numerical implementation of multi-phase material under dynamic loads, and to geotechnical installation processes. In turn, the book addresses implementation problems concerning large deformations in soils during piling operations or densification processes, and discusses the limitations of the respective methods. Numerical simulations of dynamic consolidation processes are presented in slope stability analysis under seismic excitation. Lastly, achieving the energy transition from conventional to renewable sources will call for geotechnical expertise. Consequently, the book explores and analyzes a selection of interesting problems involving the stability and serviceability ofsupporting structures, and provides new solutions approaches for practitioners and scientists in geotechnical engineering. The content reflects the outcomes of the Colloquium on Geotechnical Engineering 2019 (Geotechnik Kolloquium), held in Karlsruhe, Germany in September 2019.
Del 92 - Lecture Notes in Applied and Computational Mechanics
Flexible Engineering Toward Green Aircraft
CAE Tools for Sustainable Mobility
Inbunden, Engelska, 2020
1 082 kr
Skickas inom 10-15 vardagar
This book discusses the recent advances in aircraft design methodologies. It provides an overview of topics such as shape optimization, robust design and aeroelasticity, focusing on fluid-structure numerical methodologies to address static and dynamic aeroelastic problems. It demonstrates that the capability to evaluate the interaction between aerodynamics, inertia and elastic forces is important to avoid drag penalties, control system efficiency loss and generation of potentially dangerous phenomena, such as divergence, control reversal and flutter. The book particularly highlights the advances in “high fidelity” CFD-CSM coupling, describing the latest experimental research to validate the numerical fluid-structure interaction analysis methodologies resulting from the EU-funded RBF4AERO and RIBES projects.
Del 92 - Lecture Notes in Applied and Computational Mechanics
Flexible Engineering Toward Green Aircraft
CAE Tools for Sustainable Mobility
Häftad, Engelska, 2021
1 082 kr
Skickas inom 10-15 vardagar
This book discusses the recent advances in aircraft design methodologies. It provides an overview of topics such as shape optimization, robust design and aeroelasticity, focusing on fluid-structure numerical methodologies to address static and dynamic aeroelastic problems. It demonstrates that the capability to evaluate the interaction between aerodynamics, inertia and elastic forces is important to avoid drag penalties, control system efficiency loss and generation of potentially dangerous phenomena, such as divergence, control reversal and flutter. The book particularly highlights the advances in “high fidelity” CFD-CSM coupling, describing the latest experimental research to validate the numerical fluid-structure interaction analysis methodologies resulting from the EU-funded RBF4AERO and RIBES projects.
Del 93 - Lecture Notes in Applied and Computational Mechanics
Virtual Design and Validation
Inbunden, Engelska, 2020
1 082 kr
Skickas inom 10-15 vardagar
This book provides an overview of the experimental characterization of materials and their numerical modeling, as well as the development of new computational methods for virtual design. Its 17 contributions are divided into four main sections: experiments and virtual design, composites, fractures and fatigue, and uncertainty quantification. The first section explores new experimental methods that can be used to more accurately characterize material behavior. Furthermore, it presents a combined experimental and numerical approach to optimizing the properties of a structure, as well as new developments in the field of computational methods for virtual design. In turn, the second section is dedicated to experimental and numerical investigations of composites, with a special focus on the modeling of failure modes and the optimization of these materials. Since fatigue also includes wear due to frictional contact and aging of elastomers, new numerical schemes in the field of crack modeling and fatigue prediction are also discussed. The input parameters of a classical numerical simulation represent mean values of actual observations, though certain deviations arise: to illustrate the uncertainties of parameters used in calculations, the book’s final section presents new and efficient approaches to uncertainty quantification.
Del 93 - Lecture Notes in Applied and Computational Mechanics
Virtual Design and Validation
Häftad, Engelska, 2021
1 082 kr
Skickas inom 10-15 vardagar
This book provides an overview of the experimental characterization of materials and their numerical modeling, as well as the development of new computational methods for virtual design. Its 17 contributions are divided into four main sections: experiments and virtual design, composites, fractures and fatigue, and uncertainty quantification. The first section explores new experimental methods that can be used to more accurately characterize material behavior. Furthermore, it presents a combined experimental and numerical approach to optimizing the properties of a structure, as well as new developments in the field of computational methods for virtual design. In turn, the second section is dedicated to experimental and numerical investigations of composites, with a special focus on the modeling of failure modes and the optimization of these materials. Since fatigue also includes wear due to frictional contact and aging of elastomers, new numerical schemes in the field of crack modeling and fatigue prediction are also discussed. The input parameters of a classical numerical simulation represent mean values of actual observations, though certain deviations arise: to illustrate the uncertainties of parameters used in calculations, the book’s final section presents new and efficient approaches to uncertainty quantification.
Inbunden, Engelska, 2020
1 728 kr
Skickas inom 10-15 vardagar
This book explores computational fluid dynamics applied to ship hydrodynamics and provides guidelines for the future developments in the field based on the Tokyo 2015 Workshop. It presents ship hull test cases, experimental data and submitted computational methods, conditions, grids and results. Analysis is made of errors for global (resistance, sinkage, trim and self-propulsion) and local flow (wave elevations, mean velocities and turbulence) variables, including standard deviations for global variables. The effects of grid size and turbulence models are evaluated for both global and local flow variables. Detailed analysis is made of turbulence modeling capabilities for capturing local flow physics. Errors and standard deviations are also assessed for added resistance (captive test cases) and course keeping/speed loss (free running test cases) in head and oblique waves. All submissions are used to evaluate the error and uncertainty by means of a systematic verification and validation (V&V) study along with statistical investigations.
Del 94 - Lecture Notes in Applied and Computational Mechanics
Numerical Ship Hydrodynamics
An Assessment of the Tokyo 2015 Workshop
Häftad, Engelska, 2021
1 728 kr
Skickas inom 10-15 vardagar
This book explores computational fluid dynamics applied to ship hydrodynamics and provides guidelines for the future developments in the field based on the Tokyo 2015 Workshop. It presents ship hull test cases, experimental data and submitted computational methods, conditions, grids and results. Analysis is made of errors for global (resistance, sinkage, trim and self-propulsion) and local flow (wave elevations, mean velocities and turbulence) variables, including standard deviations for global variables. The effects of grid size and turbulence models are evaluated for both global and local flow variables. Detailed analysis is made of turbulence modeling capabilities for capturing local flow physics. Errors and standard deviations are also assessed for added resistance (captive test cases) and course keeping/speed loss (free running test cases) in head and oblique waves. All submissions are used to evaluate the error and uncertainty by means of a systematic verification and validation (V&V) study along with statistical investigations.
Del 95 - Lecture Notes in Applied and Computational Mechanics
Direct Methods
Methodological Progress and Engineering Applications
Inbunden, Engelska, 2020
1 620 kr
Skickas inom 10-15 vardagar
This book provides an overview of direct methods such as limit and shakedown analysis, which are intended to do away with the need for cumbersome step-by-step calculations and determine the loading limits of mechanical structures under monotone, cyclic or variable loading with unknown loading history. The respective contributions demonstrate how tremendous advances in numerical methods, especially in optimization, have contributed to the success of direct methods and their practical applicability to engineering problems in structural mechanics, pavement and general soil mechanics, as well as the design of composite materials. The content reflects the outcomes of the workshop “Direct Methods: Methodological Progress and Engineering Applications,” which was offered as a mini-symposium of PCM-CMM 2019, held in Cracow, Poland in September 2019.
Del 95 - Lecture Notes in Applied and Computational Mechanics
Direct Methods
Methodological Progress and Engineering Applications
Häftad, Engelska, 2021
1 620 kr
Skickas inom 10-15 vardagar
This book provides an overview of direct methods such as limit and shakedown analysis, which are intended to do away with the need for cumbersome step-by-step calculations and determine the loading limits of mechanical structures under monotone, cyclic or variable loading with unknown loading history. The respective contributions demonstrate how tremendous advances in numerical methods, especially in optimization, have contributed to the success of direct methods and their practical applicability to engineering problems in structural mechanics, pavement and general soil mechanics, as well as the design of composite materials. The content reflects the outcomes of the workshop “Direct Methods: Methodological Progress and Engineering Applications,” which was offered as a mini-symposium of PCM-CMM 2019, held in Cracow, Poland in September 2019.
Del 96 - Lecture Notes in Applied and Computational Mechanics
Coupled System Pavement - Tire - Vehicle
A Holistic Computational Approach
Inbunden, Engelska, 2021
2 158 kr
Skickas inom 10-15 vardagar
This book summarizes research being pursued within the Research Unit FOR 2089, funded by the German Research Foundation (DFG), the goal of which is to develop the scientific base for a paradigm shift towards dimensioning, structural realization and maintenance of pavements, and prepare road infrastructure for future requirements. It provides a coupled thermo-mechanical model for a holistic physical analysis of the pavement-tire-vehicle system: based on this model, pavement structures and materials can be optimized so that new demands become compatible with the main goal – durability of the structures and the materials. The development of these new and qualitatively improved modelling approaches requires a holistic procedure through the coupling of theoretical numerical and experimental approaches as well as an interdisciplinary and closely linked handling of the coupled pavement-tire-vehicle system. This interdisciplinary research provides a deeper understanding of the physics of the full system through complex, coupled simulation approaches and progress in terms of improved and, therefore, more durable and sustainable structures.
Del 96 - Lecture Notes in Applied and Computational Mechanics
Coupled System Pavement - Tire - Vehicle
A Holistic Computational Approach
Häftad, Engelska, 2022
2 158 kr
Skickas inom 10-15 vardagar
This book summarizes research being pursued within the Research Unit FOR 2089, funded by the German Research Foundation (DFG), the goal of which is to develop the scientific base for a paradigm shift towards dimensioning, structural realization and maintenance of pavements, and prepare road infrastructure for future requirements. It provides a coupled thermo-mechanical model for a holistic physical analysis of the pavement-tire-vehicle system: based on this model, pavement structures and materials can be optimized so that new demands become compatible with the main goal – durability of the structures and the materials. The development of these new and qualitatively improved modelling approaches requires a holistic procedure through the coupling of theoretical numerical and experimental approaches as well as an interdisciplinary and closely linked handling of the coupled pavement-tire-vehicle system. This interdisciplinary research provides a deeper understanding of the physics of the full system through complex, coupled simulation approaches and progress in terms of improved and, therefore, more durable and sustainable structures.
Del 97 - Lecture Notes in Applied and Computational Mechanics
Simulation of Additive Manufacturing using Meshfree Methods
With Focus on Requirements for an Accurate Solution
Inbunden, Engelska, 2021
1 728 kr
Skickas inom 10-15 vardagar
This book provides a detailed instruction to virtually reproduce the processes of Additive Manufacturing on a computer. First, all mathematical equations needed to model these processes are presented. Due to their flexibility, meshfree methods represent optimal computational solution schemes to simulate Additive Manufacturing processes. On the other hand, these methods usually do not guarantee an accurate solution. For this reason, this monograph is dedicated in detail to the necessary criteria for computational solution schemes to provide accurate results. Several meshfree methods are examined with respect to these conditions. Two different 3D printing techniques are presented in detail. The results obtained from the simulation are investigated and compared with experimental data. This work is addressed to both scientists and professionals working in the field of development who are interested to learn the secrets behind meshfree methods or get into the modeling of Additive Manufacturing.
Del 97 - Lecture Notes in Applied and Computational Mechanics
Simulation of Additive Manufacturing using Meshfree Methods
With Focus on Requirements for an Accurate Solution
Häftad, Engelska, 2022
1 728 kr
Skickas inom 10-15 vardagar
This book provides a detailed instruction to virtually reproduce the processes of Additive Manufacturing on a computer. First, all mathematical equations needed to model these processes are presented. Due to their flexibility, meshfree methods represent optimal computational solution schemes to simulate Additive Manufacturing processes. On the other hand, these methods usually do not guarantee an accurate solution. For this reason, this monograph is dedicated in detail to the necessary criteria for computational solution schemes to provide accurate results. Several meshfree methods are examined with respect to these conditions. Two different 3D printing techniques are presented in detail. The results obtained from the simulation are investigated and compared with experimental data. This work is addressed to both scientists and professionals working in the field of development who are interested to learn the secrets behind meshfree methods or get into the modeling of Additive Manufacturing.
Del 98 - Lecture Notes in Applied and Computational Mechanics
Non-standard Discretisation Methods in Solid Mechanics
Inbunden, Engelska, 2022
2 480 kr
Skickas inom 10-15 vardagar
This edited volume summarizes research being pursued within the DFG Priority Programme 1748: "Reliable Simulation Methods in Solid Mechanics. Development of non-standard discretisation methods, mechanical and mathematical analysis", the aim of which was to develop novel discretisation methods based e.g. on mixed finite element methods, isogeometric approaches as well as discontinuous Galerkin formulations, including a sound mathematical analysis for geometrically as well as physically nonlinear problems. The Priority Programme has established an international framework for mechanical and applied mathematical research to pursue open challenges on an inter-disciplinary level. The compiled results can be understood as state of the art in the research field and show promising ways of further research in the respective areas. The book is intended for doctoral and post-doctoral students in civil engineering, mechanical engineering, applied mathematics and physics, as well as industrial researchers interested in the field.
Del 98 - Lecture Notes in Applied and Computational Mechanics
Non-standard Discretisation Methods in Solid Mechanics
Häftad, Engelska, 2023
2 480 kr
Skickas inom 10-15 vardagar
This edited volume summarizes research being pursued within the DFG Priority Programme 1748: "Reliable Simulation Methods in Solid Mechanics. Development of non-standard discretisation methods, mechanical and mathematical analysis", the aim of which was to develop novel discretisation methods based e.g. on mixed finite element methods, isogeometric approaches as well as discontinuous Galerkin formulations, including a sound mathematical analysis for geometrically as well as physically nonlinear problems. The Priority Programme has established an international framework for mechanical and applied mathematical research to pursue open challenges on an inter-disciplinary level. The compiled results can be understood as state of the art in the research field and show promising ways of further research in the respective areas. The book is intended for doctoral and post-doctoral students in civil engineering, mechanical engineering, applied mathematics and physics, as well as industrial researchers interested in the field.
Del 100 - Lecture Notes in Applied and Computational Mechanics
Structural Engineering
Models and Methods for Statics, Instability and Inelasticity
Inbunden, Engelska, 2023
1 082 kr
Skickas inom 10-15 vardagar
This book presents a novel approach to the classical scientific discipline of Structural Engineering, which is inspired by numerous current applications from domains of Civil, Mechanical or Aerospace Engineering. The main goal of this book is to help with making the best choice between accuracy and efficiency, when it comes to building the most suitable structural models by practising engineers using modern computational tools available in commercial software products (SAP, FEAP, ANSYS …) for which we have carried out many developments that have been become the main reference in the field. Any development of this kind is not a mere modification of discrete approximation, but a thorough treatment with a sound theoretical formulation based upon Hu-Washizu variational principle with independent rotation field, its corresponding regularization and finally the most appropriate finite element interpolation that can match those used for structural elements. Proposed approach allows usto provide a unified discrete approximation of complex structural assemblies and greatly simplify the modeling task for structural engineers. Thus, in conclusion, this book can also be perceived as the theoretical manual for using modern computer models successfully by practising engineers.
Del 100 - Lecture Notes in Applied and Computational Mechanics
Structural Engineering
Models and Methods for Statics, Instability and Inelasticity
Häftad, Engelska, 2024
760 kr
Skickas inom 10-15 vardagar
This book presents a novel approach to the classical scientific discipline of Structural Engineering, which is inspired by numerous current applications from domains of Civil, Mechanical or Aerospace Engineering. The main goal of this book is to help with making the best choice between accuracy and efficiency, when it comes to building the most suitable structural models by practising engineers using modern computational tools available in commercial software products (SAP, FEAP, ANSYS …) for which we have carried out many developments that have been become the main reference in the field. Any development of this kind is not a mere modification of discrete approximation, but a thorough treatment with a sound theoretical formulation based upon Hu-Washizu variational principle with independent rotation field, its corresponding regularization and finally the most appropriate finite element interpolation that can match those used for structural elements. Proposed approach allows usto provide a unified discrete approximation of complex structural assemblies and greatly simplify the modeling task for structural engineers. Thus, in conclusion, this book can also be perceived as the theoretical manual for using modern computer models successfully by practising engineers.
Del 101 - Lecture Notes in Applied and Computational Mechanics
Direct Methods for Limit State of Materials and Structures
Advanced Computational Algorithms and Material Modelling
Inbunden, Engelska, 2023
1 728 kr
Skickas inom 10-15 vardagar
This book provides an overview of direct methods, such as limit and shakedown analysis, which are intended for avoiding cumbersome step-by-step calculations to determine the limit states of mechanical structures under monotone, cyclic or variable actions with unknown loading history. The book comprises several contributions that demonstrate how tremendous advances in numerical methods, especially in optimization, have contributed to the success of direct methods and their applicability to practical engineering problems in structural mechanics and mechanics of materials. The contents reflect the outcomes of the workshop “Direct Methods for Limit State of Materials and Structures,” held in Cosenza, Italy in June 2022.
Del 101 - Lecture Notes in Applied and Computational Mechanics
Direct Methods for Limit State of Materials and Structures
Advanced Computational Algorithms and Material Modelling
Häftad, Engelska, 2024
1 728 kr
Skickas inom 10-15 vardagar
This book provides an overview of direct methods, such as limit and shakedown analysis, which are intended for avoiding cumbersome step-by-step calculations to determine the limit states of mechanical structures under monotone, cyclic or variable actions with unknown loading history. The book comprises several contributions that demonstrate how tremendous advances in numerical methods, especially in optimization, have contributed to the success of direct methods and their applicability to practical engineering problems in structural mechanics and mechanics of materials. The contents reflect the outcomes of the workshop “Direct Methods for Limit State of Materials and Structures,” held in Cosenza, Italy in June 2022.
Del 102 - Lecture Notes in Applied and Computational Mechanics
Calm, Smooth and Smart
Novel Approaches for Influencing Vibrations by Means of Deliberately Introduced Dissipation
Inbunden, Engelska, 2023
1 943 kr
Skickas inom 10-15 vardagar
This book contains and summarizes research carried out within the DFG Priority Programme 1897: "Calm, Smooth and Smart - Novel Approaches for Influencing Vibrations by Means of Deliberately Introduced Dissipation". The contributions help reduce unwanted vibrations by developing novel approaches for influencing them and lead to a “calm, smooth and smart” behaviour of technical units. “Calm” represents the demand to avoid or at least to severely reduce unwanted noise generated by technical installations. “Smooth” ensures a still comfortable and jerk-free operation of them. Finally, “smart” means that the introduced damping devices not only help to achieve the desired vibrational behaviour of the overall technical systems, but also that they take over additional functional tasks. The results presented in this volume summarize the state-of-the-art and provide motivation for future research. The book is intended for experienced researchers as well as for doctoral and post-doctoral students in engineering, mathematics and physics, as well as industrial researchers interested in the field.
Del 102 - Lecture Notes in Applied and Computational Mechanics
Calm, Smooth and Smart
Novel Approaches for Influencing Vibrations by Means of Deliberately Introduced Dissipation
Häftad, Engelska, 2024
1 943 kr
Skickas inom 10-15 vardagar
This book contains and summarizes research carried out within the DFG Priority Programme 1897: "Calm, Smooth and Smart - Novel Approaches for Influencing Vibrations by Means of Deliberately Introduced Dissipation". The contributions help reduce unwanted vibrations by developing novel approaches for influencing them and lead to a “calm, smooth and smart” behaviour of technical units. “Calm” represents the demand to avoid or at least to severely reduce unwanted noise generated by technical installations. “Smooth” ensures a still comfortable and jerk-free operation of them. Finally, “smart” means that the introduced damping devices not only help to achieve the desired vibrational behaviour of the overall technical systems, but also that they take over additional functional tasks. The results presented in this volume summarize the state-of-the-art and provide motivation for future research. The book is intended for experienced researchers as well as for doctoral and post-doctoral students in engineering, mathematics and physics, as well as industrial researchers interested in the field.