Woodhead Publishing Series in Energy - Böcker

Renewable Energy Forecasting: From Models to Applications provides an overview of the state-of-the-art of renewable energy forecasting technology and its applications. After an introduction to the principles of meteorology and renewable energy generation, groups of chapters address forecasting models, very short-term forecasting, forecasting of extremes, and longer term forecasting. The final part of the book focuses on important applications of forecasting for power system management and in energy markets.

Due to shrinking fossil fuel reserves and concerns about climate change, renewable energy holds an increasing share of the energy mix. Solar, wind, wave, and hydro energy are dependent on highly variable weather conditions, so their increased penetration will lead to strong fluctuations in the power injected into the electricity grid, which needs to be managed. Reliable, high quality forecasts of renewable power generation are therefore essential for the smooth integration of large amounts of solar, wind, wave, and hydropower into the grid as well as for the profitability and effectiveness of such renewable energy projects.

Offers comprehensive coverage of wind, solar, wave, and hydropower forecasting in one convenient volume Addresses a topic that is growing in importance, given the increasing penetration of renewable energy in many countries Reviews state-of-the-science techniques for renewable energy forecasting Contains chapters on operational applications

After decades of research and development, concentrating solar thermal (CST) power plants (also known as concentrating solar power (CSP) and as Solar Thermal Electricity or STE systems) are now starting to be widely commercialized. Indeed, the IEA predicts that by 2050, with sufficient support over ten percent of global electricity could be produced by concentrating solar thermal power plants. However, CSP plants are just but one of the many possible applications of CST systems. Advances in Concentrating Solar Thermal Research and Technology provides detailed information on the latest advances in CST systems research and technology. It promotes a deep understanding of the challenges the different CST technologies are confronted with, of the research that is taking place worldwide to address those challenges, and of the impact that the innovation that this research is fostering could have on the emergence of new CST components and concepts. It is anticipated that these developments will substantially increase the cost-competiveness of commercial CST solutions and reshape the technological landscape of both CST technologies and the CST industry. After an introductory chapter, the next three parts of the book focus on key CST plant components, from mirrors and receivers to thermal storage. The final two parts of the book address operation and control and innovative CST system concepts.

Contains authoritative reviews of CST research taking place around the world Discusses the impact this research is fostering on the emergence of new CST components and concepts that will substantially increase the cost-competitiveness of CST power Covers both major CST plant components and system-wide issues

Geological Repository Systems for Safe Disposal of Spent Nuclear Fuels and Radioactive Waste, Second Edition, critically reviews state-of-the-art technologies and scientific methods relating to the implementation of the most effective approaches to the long-term, safe disposition of nuclear waste, also discussing regulatory developments and social engagement approaches as major themes.

Chapters in Part One introduce the topic of geological disposal, providing an overview of near-surface, intermediate depth, and deep borehole disposal, spanning low-, medium- and high-level wastes. Part Two addresses the different types of repository systems - crystalline, clay, and salt, also discussing methods of site surveying and construction. The critical safety issue of engineered barrier systems is the focus of Part Three, with coverage ranging from nuclear waste canisters, to buffer and backfill materials.

Lastly, Parts Four and Five focus on safety, security, and acceptability, concentrating on repository performance assessment, then radiation protection, environmental monitoring, and social engagement. Comprehensively revised, updated, and expanded with 25% new material on topics of current importance, this is the standard reference for all nuclear waste management and geological repository professionals and researchers.

Contains 25% more material on topics of current importance in this new, comprehensive edition Fully updated coverage of both near-surface/intermediate depth, and deep borehole disposal in one convenient volume Goes beyond the scientific and technical aspects of disposal to include the political, regulatory, and societal issues involved, all from an international perspective

Offshore Wind Farms: Technologies, Design and Operation provides the latest information on offshore wind energy, one of Europe's most promising and quickly maturing industries, and a potentially huge untapped renewable energy source which could contribute significantly towards EU 20-20-20 renewable energy generation targets.

It has been estimated that by 2030 Europe could have 150GW of offshore wind energy capacity, meeting 14% of our power demand. Offshore Wind Farms: Technologies, Design and Operation provides a comprehensive overview of the emerging technologies, design, and operation of offshore wind farms.

Part One introduces offshore wind energy as well as offshore wind turbine siting with expert analysis of economics, wind resources, and remote sensing technologies. The second section provides an overview of offshore wind turbine materials and design, while part three outlines the integration of wind farms into power grids with insights to cabling and energy storage. The final section of the book details the installation and operation of offshore wind farms with chapters on condition monitoring and health and safety, amongst others.

Provides an in-depth, multi-contributor, comprehensive overview of offshore technologies, including design, monitoring, and operation Edited by respected and leading experts in the field, with experience in both academia and industry Covers a highly relevant and important topic given the great potential of offshore wind power in contributing significantly to EU 20-20-20 renewable energy targets

Microalgae-Based Biofuels and Bioproducts: From Feedstock Cultivation to End Products compiles contributions from authors from different areas and backgrounds who explore the cultivation and utilization of microalgae biomass for sustainable fuels and chemicals.

With a strong focus in emerging industrial and large scale applications, the book summarizes the new achievements in recent years in this field by critically evaluating developments in the field of algal biotechnology, whilst taking into account sustainability issues and techno-economic parameters. It includes information on microalgae cultivation, harvesting, and conversion processes for the production of liquid and gaseous biofuels, such as biogas, bioethanol, biodiesel and biohydrogen. Microalgae biorefinery and biotechnology applications, including for pharmaceuticals, its use as food and feed, and value added bioproducts are also covered.

This book's comprehensive scope makes it an ideal reference for both early stage and consolidated researchers, engineers and graduate students in the algal field, especially in energy, chemical and environmental engineering, biotechnology, biology and agriculture.

Presents the most current information on the uses and untapped potential of microalgae in the production of bio-based fuels and chemicals Critically reviews the state-of-the-art feedstock cultivation of biofuels and bioproducts mass production from microalgae, including intermediate stages, such as harvesting and extraction of specific compounds Includes topics in economics and sustainability of large-scale microalgae cultivation and conversion technologies

Bioenergy Systems for the Future: Prospects for Biofuels and Biohydrogen examines the current advances in biomass conversion technologies for biofuels and biohydrogen production, including their advantages and challenges for real-world application and industrial-scale implementation.

In its first part, the book explores the use of lignocellulosic biomass and agricultural wastes as feedstock, also addressing biomass conversion into biofuels, such as bioethanol, biodiesel, bio-methane, and bio-gasoline. The chapters in Part II cover several different pathways for hydrogen production, from biomass, including bioethanol and bio-methane reforming and syngas conversion. They also include a comparison between the most recent conversion technologies and conventional approaches for hydrogen production.

Part III presents the status of advanced bioenergy technologies, such as applications of nanotechnology and the use of bio-alcohol in low-temperature fuel cells. The role of advanced bioenergy in a future bioeconomy and the integration of these technologies into existing systems are also discussed, providing a comprehensive, application-oriented overview that is ideal for engineering professionals, researchers, and graduate students involved in bioenergy.

Explores the most recent technologies for advanced liquid and gaseous biofuels production, along with their advantages and challenges Presents real-life application of conversion technologies and their integration in existing systems Includes the most promising pathways for sustainable hydrogen production for energy applications

Trends in Oil and Gas Corrosion Research and Technologies: Production and Transmission delivers the most up-to-date and highly multidisciplinary reference available to identify emerging developments, fundamental mechanisms and the technologies necessary in one unified source.

Starting with a brief explanation on corrosion management that also addresses today's most challenging issues for oil and gas production and transmission operations, the book dives into the latest advances in microbiology-influenced corrosion and other corrosion threats, such as stress corrosion cracking and hydrogen damage just to name a few. In addition, it covers testing and monitoring techniques, such as molecular microbiology and online monitoring for surface and subsurface facilities, mitigation tools, including coatings, nano-packaged biocides, modeling and prediction, cathodic protection and new steels and non-metallics.

Rounding out with an extensive glossary and list of abbreviations, the book equips upstream and midstream corrosion professionals in the oil and gas industry with the most advanced collection of topics and solutions to responsibly help solve today's oil and gas corrosion challenges.

Covers the latest in corrosion mitigation techniques, such as corrosion inhibitors, biocides, non-metallics, coatings, and modeling and prediction Solves knowledge gaps with the most current technology and discoveries on specific corrosion mechanisms, highlighting where future research and industry efforts should be concentrated Achieves practical and balanced understanding with a full spectrum of subjects presented from multiple academic and world-renowned contributors in the industry

Advances and Innovations in Nuclear Decommissioning is an essential resource for industry professionals and academics interested in acquiring the most up-to-date information on the current state of nuclear decommissioning. Written and edited by the world's leading experts, this book considers lessons learned and new innovations in the field. Edited by Dr. Laraia, it is the perfect companion to his 2012 book, Nuclear Decommissioning, which critically reviews the nuclear decommissioning processes and technologies applicable to nuclear power plants and other civilian nuclear facilities.

Where the earlier book covers the basics of decommissioning, this new book brings you up-to-date with new areas of interest and approaches, innovative technologies, and lessons learned by both the nuclear and non-nuclear decommissioning sectors.

Focuses on new aspects, trends and innovative technologies Includes content on decommissioning after a severe accident, including the use of robotics Brings together information from around the world and considers the lessons learned from the non-nuclear sector as well

Advances in Coal Mine Ground Control is a comprehensive text covering all recent advances in coal mine ground control, the most advanced subsystem of the rapidly advancing coal mining systems.

This complete resource is written by Professor Syd Peng who, alongside leading experts from the world's major coal producing countries, has contributed extensively to the understanding of subsidence from underground coal mining, longwall operations and ground control in underground mines.

Syd and the team of contributors bring together key advances from the past decade into one comprehensive resource that is accessible to all those studying, researching and working in the mining industry.

This book is an essential text for undergraduate and graduate students of mining engineering and related programs, and a must-have reference for mining, civil and geotechnical engineers.

Written and edited by the world's leading experts on ground control in coal mining Covers all aspects of ground control practices in coal mines Focuses on advances over the past decade, equipping readers with the most up-to-date knowledge regarding current research and practices in the field

Advances in Productive, Safe, and Responsible Coal Mining covers the latest advancements in coal mining technology and practices. It gives a comprehensive introduction to the latest research and technology developments, addressing problems and issues currently being faced, and is a valuable resource of complied technical information on the latest coal mining safety and health research. As coal's staying power has been at the forefront of the world's energy mix for more than a century, this book explores critical issues affecting coal mining, including how to maintain low-cost productivity, address health and safety hazards, and how to be responsible environmental stewards.

This book takes a holistic approach in addressing each issue from the perspective of its impact on the coal mining operation and industry as a whole.

Explains how to effectively produce coal within existing environmental constraints Encapsulates the latest health and safety research and technological advances in the coal mining industry Written by authors who have developed the latest technology for coal mines

Biorefineries are an essential technology in converting biomass into biofuels or other useful materials. Advances in Biorefineries provides a comprehensive overview of biorefining processing techniques and technologies, and the biofuels and other materials produced.

Part one focuses on methods of optimizing the biorefining process and assessing its environmental and economic impact. It also looks at current and developing technologies for producing value-added materials. Part two goes on to explore these materials with a focus on biofuels and other value-added products. It considers the properties, limitations, and practical applications of these products and how they can be used to meet the increasing demand for renewable and sustainable fuels as an alternative to fossil fuels.

Advances in Biorefineries is a vital reference for biorefinery/process engineers, industrial biochemists/chemists, biomass/waste scientists and researchers and academics in the field.

A comprehensive and systematic reference on the advanced biomass recovery and conversion processes used in biorefineries Reviews developments in biorefining processes Discusses the wide range of value-added products from biorefineries, from biofuel to biolubricants and bioadhesives

Modern gas turbine power plants represent one of the most efficient and economic conventional power generation technologies suitable for large-scale and smaller scale applications. Alongside this, gas turbine systems operate with low emissions and are more flexible in their operational characteristics than other large-scale generation units such as steam cycle plants. Gas turbines are unrivalled in their superior power density (power-to-weight) and are thus the prime choice for industrial applications where size and weight matter the most. Developments in the field look to improve on this performance, aiming at higher efficiency generation, lower emission systems and more fuel-flexible operation to utilise lower-grade gases, liquid fuels, and gasified solid fuels/biomass. Modern gas turbine systems provides a comprehensive review of gas turbine science and engineering.The first part of the book provides an overview of gas turbine types, applications and cycles. Part two moves on to explore major components of modern gas turbine systems including compressors, combustors and turbogenerators. Finally, the operation and maintenance of modern gas turbine systems is discussed in part three. The section includes chapters on performance issues and modelling, the maintenance and repair of components and fuel flexibility.Modern gas turbine systems is a technical resource for power plant operators, industrial engineers working with gas turbine power plants and researchers, scientists and students interested in the field.Provides a comprehensive review of gas turbine systems and fundamentals of a cycleExamines the major components of modern systems, including compressors, combustors and turbinesDiscusses the operation and maintenance of component parts

Carbon dioxide (CO2) capture and storage (CCS) is the one advanced technology that conventional power generation cannot do without. CCS technology reduces the carbon footprint of power plants by capturing, and storing the CO2 emissions from burning fossil-fuels and biomass. This volume provides a comprehensive reference on the state of the art research, development and demonstration of carbon storage and utilisation, covering all the storage options and their environmental impacts. It critically reviews geological, terrestrial and ocean sequestration, including enhanced oil and gas recovery, as well as other advanced concepts such as industrial utilisation, mineral carbonation, biofixation and photocatalytic reduction.Foreword written by Lord Oxburgh, Climate Science PeerComprehensively examines the different methods of storage of carbon dioxide (CO2) and the various concepts for utilisationReviews geological sequestration of CO2, including coverage of reservoir sealing and monitoring and modelling techniques used to verify geological sequestration of CO2

Biodiesel production is a rapidly advancing field worldwide, with biodiesel fuel increasingly being used in compression ignition (diesel) engines. Biodiesel has been extensively studied and utilised in developed countries, and it is increasingly being introduced in developing countries, especially in regions with high potential for sustainable biodiesel production.Initial sections systematically review feedstock resources and vegetable oil formulations, including the economics of vegetable oil conversion to diesel fuel, with additional coverage of emerging energy crops for biodiesel production. Further sections review the transesterification process, including chemical (catalysis) and biochemical (biocatalysis) processes, with extended coverage of industrial process technology and control methods, and standards for biodiesel fuel quality assurance. Final chapters cover the sustainability, performance and environmental issues of biodiesel production, as well as routes to improve glycerol by-product usage and the development of next-generation products.Biodiesel science and technology: From soil to oil provides a comprehensive reference to fuel engineers, researchers and academics on the technological developments involved in improving biodiesel quality and production capacity that are crucial to the future of the industry.Evaluates biodiesel as a renewable energy source and documents global biodiesel developmentThe outlook for biodiesel science and technology is presented exploring the challenges faced by the global diesel industryReviews feedstock resources and vegetable oil formation including emerging crops and the agronomic potential of underexploited oil crops

Carbon dioxide (CO2) capture and storage (CCS) is the one advanced technology that conventional power generation cannot do without. CCS technology reduces the carbon footprint of power plants by capturing and storing the CO2 emissions from burning fossil-fuels and biomass. This volume provides a comprehensive reference on the state of the art research, development and demonstration of carbon capture technology in the power sector and in industry. It critically reviews the range of post- and pre-combustion capture and combustion-based capture processes and technology applicable to fossil-fuel power plants, as well as applications of CCS in other high carbon footprint industries.Foreword written by Lord Oxburgh, Climate Science PeerReviews the economics, regulation and planning of carbon capture and storage for power plants and industryExplores developments in combustion processes and technologies for CO2 capture in power plants

Almost half of the total energy produced in the developed world is inefficiently used to heat, cool, ventilate and control humidity in buildings, to meet the increasingly high thermal comfort levels demanded by occupants. The utilisation of advanced materials and passive technologies in buildings would substantially reduce the energy demand and improve the environmental impact and carbon footprint of building stock worldwide.Materials for energy efficiency and thermal comfort in buildings critically reviews the advanced building materials applicable for improving the built environment. Part one reviews both fundamental building physics and occupant comfort in buildings, from heat and mass transport, hygrothermal behaviour, and ventilation, on to thermal comfort and health and safety requirements.Part two details the development of advanced materials and sustainable technologies for application in buildings, beginning with a review of lifecycle assessment and environmental profiling of materials. The section moves on to review thermal insulation materials, materials for heat and moisture control, and heat energy storage and passive cooling technologies. Part two concludes with coverage of modern methods of construction, roofing design and technology, and benchmarking of fa�ades for optimised building thermal performance.Finally, Part three reviews the application of advanced materials, design and technologies in a range of existing and new building types, including domestic, commercial and high-performance buildings, and buildings in hot and tropical climates.This book is of particular use to, mechanical, electrical and HVAC engineers, architects and low-energy building practitioners worldwide, as well as to academics and researchers in the fields of building physics, civil and building engineering, and materials science.Explores improving energy efficiency and thermal comfort through material selection and sustainable technologiesDocuments the development of advanced materials and sustainable technologies for applications in building design and constructionExamines fundamental building physics and occupant comfort in buildings featuring heat and mass transport, hygrothermal behaviour and ventilation

Plant life management (PLiM) is a methodology focussed on the safety-first management of nuclear power plants over their entire lifetime. It incorporates and builds upon the usual periodic safety reviews and licence renewals as part of an overall framework designed to assist plant operators and regulators in assessing the operating conditions of a nuclear power plant, and establishing the technical and economic requirements for safe, long-term operation.Understanding and mitigating ageing in nuclear power plants critically reviews the fundamental ageing-degradation mechanisms of materials used in nuclear power plant structures, systems and components (SSC), along with their relevant analysis and mitigation paths, as well as reactor-type specific PLiM practices. Obsolescence and other less obvious ageing-related aspects in nuclear power plant operation are also examined in depth.Part one introduces the reader to the role of nuclear power in the global energy mix, and the importance and relevance of plant life management for the safety regulation and economics of nuclear power plants. Key ageing degradation mechanisms and their effects in nuclear power plant systems, structures and components are reviewed in part two, along with routes taken to characterise and analyse the ageing of materials and to mitigate or eliminate ageing degradation effects. Part three reviews analysis, monitoring and modelling techniques applicable to the study of nuclear power plant materials, as well as the application of advanced systems, structures and components in nuclear power plants. Finally, Part IV reviews the particular ageing degradation issues, plant designs, and application of plant life management (PLiM) practices in a range of commercial nuclear reactor types.With its distinguished international team of contributors, Understanding and mitigating ageing in nuclear power plants is a standard reference for all nuclear plant designers, operators, and nuclear safety and materials professionals and researchers.Introduces the reader to the role of nuclear power in the global energy mixReviews the fundamental ageing-degradation mechanisms of materials used in nuclear power plant structures, systems and components (SSC)Examines topics including elimination of ageing effects, plant design, and the application of plant life management (PLiM) practices in a range of commercial nuclear reactor types

Large-scale wind power generation is one of the fastest developing sources of renewable energy and already makes a substantial contribution to power grids in many countries worldwide. With technology maturing, the challenge is now to increase penetration, and optimise the design, construction and performance of wind energy systems. Fundamental issues of safety and reliability are paramount in this drive to increase capacity and efficiency.Wind energy systems: Optimising design and construction for safe and reliable operation provides a comprehensive review of the latest developments in the design, construction and operation of large-scale wind energy systems, including in offshore and other problematic environments.Part one provides detailed coverage of wind resource assessment and siting methods relevant to wind turbine and wind farm planning, as well as aeroelastics, aerodynamics, and fatigue loading that affect the safety and reliability of wind energy systems. This coverage is extended in part two, where the design and development of individual components is considered in depth, from wind turbine rotors to drive train and control systems, and on to tower design and construction. Part three explores operation and maintenance issues, such as reliability and maintainability strategies and condition monitoring systems, before discussing performance assessment and optimisation routes for wind energy systems in low wind speed environments and cold climates. Part four reviews offshore wind energy systems development, from the impact of environmental loads such as wind, waves and ice, to site specific construction and integrated wind farm planning, and of course the critical issues and strategies for offshore operation and maintenance.With its distinguished editors and international teams of contributors, Wind energy systems is a standard reference for wind power engineers, technicians and manufacturers, as well as researchers and academics involved in this expanding field.Reviews the latest developments in the design, construction and operation of large-scale wind energy systemsOffers detailed coverage of wind resource assessment and siting methods relevant to wind turbine and wind farm planningExplores operation and maintenance issues, such as reliability and maintainability strategies and condition monitoring systems

The nuclear fuel cycle is characterised by the wide range of scientific disciplines and technologies it employs. The development of ever more integrated processes across the many stages of the nuclear fuel cycle therefore confronts plant manufacturers and operators with formidable challenges. Nuclear fuel cycle science and engineering describes both the key features of the complete nuclear fuel cycle and the wealth of recent research in this important field.Part one provides an introduction to the nuclear fuel cycle. Radiological protection, security and public acceptance of nuclear technology are considered, along with the economics of nuclear power. Part two goes on to explore materials mining, enrichment, fuel element design and fabrication for the uranium and thorium nuclear fuel cycle. The impact of nuclear reactor design and operation on fuel element irradiation is the focus of part three, including water and gas-cooled reactors, along with CANDU and Generation IV designs. Finally, part four reviews spent nuclear fuel and radioactive waste management.With its distinguished editor and international team of expert contributors, Nuclear fuel cycle science and engineering provides an important review for all those involved in the design, fabrication, use and disposal of nuclear fuels as well as regulatory bodies and researchers in this field.Provides a comprehensive and holistic review of the complete nuclear fuel cycleReviews the issues presented by the nuclear fuel cycle, including radiological protection and security, public acceptance and economic analysisDiscusses issues at the front-end of the fuel cycle, including uranium and thorium mining, enrichment and fuel design and fabrication

Global demand for low cost, efficient and sustainable energy production is ever increasing. Driven by recent discoveries and innovation in the science and technology of materials, applications based on functional materials are becoming increasingly important. Functional materials for sustainable energy applications provides an essential guide to the development and application of these materials in sustainable energy production.Part one reviews functional materials for solar power, including silicon-based, thin-film, and dye sensitized photovoltaic solar cells, thermophotovoltaic device modelling and photoelectrochemical cells. Part two focuses on functional materials for hydrogen production and storage. Functional materials for fuel cells are then explored in part three where developments in membranes, catalysts and membrane electrode assemblies for polymer electrolyte and direct methanol fuel cells are discussed, alongside electrolytes and ion conductors, novel cathodes, anodes, thin films and proton conductors for solid oxide fuel cells. Part four considers functional materials for demand reduction and energy storage, before the book concludes in part five with an investigation into computer simulation studies of functional materials.With its distinguished editors and international team of expert contributors, Functional materials for sustainable energy applications is an indispensable tool for anyone involved in the research, development, manufacture and application of materials for sustainable energy production, including materials engineers, scientists and academics in the rapidly developing, interdisciplinary field of sustainable energy.An essential guide to the development and application of functional materials in sustainable energy productionReviews functional materials for solar powerFocuses on functional materials for hydrogen production and storage, fuel cells, demand reduction and energy storage

Biodiesel is one of the main biofuels capable of substituting fossil fuel usage in compression ignition vehicles, and is used in a variety of fuel blends worldwide. First-generation biodiesel has been used in national markets for some time, with fuel quality standards in place for this purpose. There remain, however, several restrictions to sustainable and long term market development, which is influenced by many factors, including food vs. fuel pressures. The development of new generations of biodiesel, aimed at more sustainable and effective feedstock utilisation alongside improved production efficiency and fuel quality, is critical to the future both of this industry and of the continuing use of biodiesel fuels in transportation.This book provides a timely reference on the advances in the development of biodiesel fuels, production processes and technologies. Part one reviews the life cycle sustainability assessment and socio-economic and environmental policy issues associated with advanced biodiesel production, as well as feedstocks and fuel quality standards. This coverage is extended in Part two, with chapters focussing on the development of methods and catalysts essential to the improvement and optimisation of biodiesel production processes and technologies.With its distinguished editors and international team of contributors, Advances in biodiesel production a standard reference for chemical, biochemical and industrial process engineers, as well as scientists and researchers in this important field.Provides a timely reference on the advances in the development of biodiesel fuels, production processes and technologiesReviews the life cycle sustainability assessment and socio-economic and environmental policy issues associated with advanced biodiesel production, as well as feedstocks and fuel quality standardsDiscusses the development of methods and catalysts essential to the improvement and optimisation of biodiesel production processes and technologies

Conventional coal, oil and gas resources used worldwide for power production and transportation are limited and unsustainable. Research and development into clean, alternative hydrocarbon fuels is therefore aimed at improving fuel security through exploring new feedstock conversion techniques, improving production efficiency and reducing environmental impacts.Advances in clean hydrocarbon fuel processing provides a comprehensive and systematic reference on the range of alternative conversion processes and technologies.Following introductory overviews of the feedstocks, environmental issues and life cycle assessment for alternative hydrocarbon fuel processing, sections go on to review solid, liquid and gaseous fuel conversion. Solid fuel coverage includes reviews of liquefaction, gasification, pyrolysis and biomass catalysis. Liquid fuel coverage includes reviews of sulfur removal, partial oxidation and hydroconversion. Gaseous fuel coverage includes reviews of Fischer-Tropsch synthesis, methanol and dimethyl ether production, water-gas shift technology and natural gas hydrate conversion. The final section examines environmental degradation issues in fuel processing plants as well as automation, advanced process control and process modelling techniques for plant optimisationWritten by an international team of expert contributors, Advances in clean hydrocarbon fuel processing provides a valuable reference for fuel processing engineers, industrial petrochemists and energy professionals, as well as for researchers and academics in this field.A comprehensive reference on the range of alternative conversion processes and technologiesProvides an overview of the feedstocks, environmental issues and life cycle assessments for alternative hydrocarbon fuel processing, including a review of the key issues in solid, liquid and gaseous fuel conversionExamines automation, advanced process control and process modelling techniques for plant optimisation

Membrane materials allow for the selective separation of gas and vapour and for ion transport. Materials research and development continues to drive improvements in the design, manufacture and integration of membrane technologies as critical components in both sustainable energy and clean industry applications. Membrane utilisation offers process simplification and intensification in industry, providing low-cost, and efficient and reliable operation, and contributing towards emissions reductions and energy security. Advanced membrane science and technology for sustainable energy and environmental applications presents a comprehensive review of membrane utilisation and integration within energy and environmental industries.Part one introduces the topic of membrane science and engineering, from the fundamentals of membrane processes and separation to membrane characterization and economic analysis. Part two focuses on membrane utilisation for carbon dioxide (CO2) capture in coal and gas power plants, including pre- and post-combustion and oxygen transport technologies. Part three reviews membranes for the petrochemical industry, with chapters covering hydrocarbon fuel, natural gas and synthesis gas processing, as well as advanced biofuels production. Part four covers membranes for alternative energy applications and energy storage, such as membrane technology for redox and lithium batteries, fuel cells and hydrogen production. Finally, part five discusses membranes utilisation in industrial and environmental applications, including microfiltration, ultrafiltration, and forward osmosis, as well as water, wastewater and nuclear power applications.With its distinguished editors and team of expert contributors, Advanced membrane science and technology for sustainable energy and environmental applications is an essential reference for membrane and materials engineers and manufacturers, as well as researchers and academics interested in this field.Presents a comprehensive review of membrane science and technology, focusing on developments and applications in sustainable energy and clean-industryDiscusses the fundamentals of membrane processes and separation and membrane characterization and economic analysisAddresses the key issues of membrane utilisation in coal and gas power plants and the petrochemical industry, the use of membranes for alternative energy applications and membrane utilisation in industrial and environmental applications

Oxy-fuel combustion is currently considered to be one of the major technologies for carbon dioxide (CO2) capture in power plants. The advantages of using oxygen (O2) instead of air for combustion include a CO2-enriched flue gas that is ready for sequestration following purification and low NOx emissions. This simple and elegant technology has attracted considerable attention since the late 1990s, rapidly developing from pilot-scale testing to industrial demonstration. Challenges remain, as O2 supply and CO2 capture create significant energy penalties that must be reduced through overall system optimisation and the development of new processes.Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers. Following a foreword by Professor J�nos M. Be�r, the book opens with an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment. Part one introduces oxy-fuel combustion further, with a chapter comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture, followed by chapters on plant operation, industrial scale demonstrations, and circulating fluidized bed combustion. Part two critically reviews oxy-fuel combustion fundamentals, such as ignition and flame stability, burner design, emissions and heat transfer characteristics, concluding with chapters on O2 production and CO2 compression and purification technologies. Finally, part three explores advanced concepts and developments, such as near-zero flue gas recycle and high-pressure systems, as well as chemical looping combustion and utilisation of gaseous fuel.With its distinguished editor and internationally renowned contributors, Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture provides a rich resource for power plant designers, operators, and engineers, as well as academics and researchers in the field.Comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilersProvides an overview of oxy-fuel combustion technology and its role in a carbon-constrained environmentIntroduces oxy-fuel combustion comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture

Advanced separations technology is key to closing the nuclear fuel cycle and relieving future generations from the burden of radioactive waste produced by the nuclear power industry. Nuclear fuel reprocessing techniques not only allow for recycling of useful fuel components for further power generation, but by also separating out the actinides, lanthanides and other fission products produced by the nuclear reaction, the residual radioactive waste can be minimised. Indeed, the future of the industry relies on the advancement of separation and transmutation technology to ensure environmental protection, criticality-safety and non-proliferation (i.e., security) of radioactive materials by reducing their long-term radiological hazard.Advanced separation techniques for nuclear fuel reprocessing and radioactive waste treatment provides a comprehensive and timely reference on nuclear fuel reprocessing and radioactive waste treatment. Part one covers the fundamental chemistry, engineering and safety of radioactive materials separations processes in the nuclear fuel cycle, including coverage of advanced aqueous separations engineering, as well as on-line monitoring for process control and safeguards technology. Part two critically reviews the development and application of separation and extraction processes for nuclear fuel reprocessing and radioactive waste treatment. The section includes discussions of advanced PUREX processes, the UREX+ concept, fission product separations, and combined systems for simultaneous radionuclide extraction. Part three details emerging and innovative treatment techniques, initially reviewing pyrochemical processes and engineering, highly selective compounds for solvent extraction, and developments in partitioning and transmutation processes that aim to close the nuclear fuel cycle. The book concludes with other advanced techniques such as solid phase extraction, supercritical fluid and ionic liquid extraction, and biological treatment processes.With its distinguished international team of contributors, Advanced separation techniques for nuclear fuel reprocessing and radioactive waste treatment is a standard reference for all nuclear waste management and nuclear safety professionals, radiochemists, academics and researchers in this field.A comprehensive and timely reference on nuclear fuel reprocessing and radioactive waste treatmentDetails emerging and innovative treatment techniques, reviewing pyrochemical processes and engineering, as well as highly selective compounds for solvent extractionDiscusses the development and application of separation and extraction processes for nuclear fuel reprocessing and radioactive waste treatment

The Energy Internet: An Open Energy Platform to Transform Legacy Power Systems into Open Innovation and Global Economic Engines is an innovative concept that changes the way people generate, distribute and consume electrical energy. With the potential to transform the infrastructure of the electric grid, the book challenges existing power systems, presenting innovative and pioneering theories and technologies that will challenge existing norms on generation and consumption. Researchers, academics, engineers, consultants and policymakers will gain a thorough understanding of the Energy Internet that includes a thorough dissemination of case studies from the USA, China, Japan, Germany and the U.K.

The book's editors provide analysis of various enabling technologies and technical solutions, such as control theory, communication, and the social and economic aspects that are central to obtaining a clear appreciation of the potential of this complex infrastructure.

Presents the first complete resource on the innovative concept of the Energy Internet Provides a clear analysis of the architecture of the Energy Internet to ensure an understanding of the technologies behind generating, distributing and consuming electricity in this way Includes a variety of global case studies of real-world implementation and pilot projects to thoroughly demonstrate the theoretical, technological and economic considerations

Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment presents the latest computational fluid dynamic technologies. It includes an evaluation of safety systems for reactors using CFD and their design, the modeling of Severe Accident Phenomena Using CFD, Model Development for Two-phase Flows, and Applications for Sodium and Molten Salt Reactor Designs. Editors Joshi and Nayak have an invaluable wealth of experience that enables them to comment on the development of CFD models, the technologies currently in practice, and the future of CFD in nuclear reactors.

Readers will find a thematic discussion on each aspect of CFD applications for the design and safety assessment of Gen II to Gen IV reactor concepts that will help them develop cost reduction strategies for nuclear power plants.

Presents a thematic and comprehensive discussion on each aspect of CFD applications for the design and safety assessment of nuclear reactors Provides an historical review of the development of CFD models, discusses state-of-the-art concepts, and takes an applied and analytic look toward the future Includes CFD tools and simulations to advise and guide the reader through enhancing cost effectiveness, safety and performance optimization

Advances in Ultra-low Emission Control Technologies for Coal-Fired Power Plants discusses the emissions standards of dust, SO2, NOx and mercury pollution, also presenting the key technologies available to control emissions in coal-fired power plants. The practical effects of ultra-low emissions projects included help the reader understand related implications in plants. Emphasis is placed on 300MW subcritical, 600MW subcritical, 660MW supercritical and 1000MW ultra-supercritical coal-fired units. The influence of different pollutant control units, such as wet electrostatic precipitator, desulfurization equipment and the electrostatic precipitator are also analyzed, and the pollutant levels before and after retrofitted ultra-low emissions are compared throughout. Provides a unique analysis of advanced technologies, such as dust-removal, desulfurization and denitrification used for ultra-low emissions in coal-fired power plants Introduces emission standards for dust, SO2, NOx and Mercury pollution from coal-fired power plants in China, the US and Europe Provides solutions to reducing emissions based on technological advances in China Analyzes the environmental and economic effects of these technologies

Linear and Non-Linear Stability Analysis in Boiling Water Reactors: The Design of Real-Time Stability Monitors presents a thorough analysis of the most innovative BWR reactors and stability phenomena in one accessible resource. The book presents a summary of existing literature on BWRs to give early career engineers and researchers a solid background in the field, as well as the latest research on stability phenomena (propagation phenomena in BWRs), nuclear power monitors, and advanced computer systems used to for the prediction of stability. It also emphasizes the importance of BWR technology and embedded neutron monitoring systems (APRMs and LPRMs), and introduces non-linear stability parameters that can be used for the onset detection of instabilities in BWRs.

Additionally, the book details the scope, advantages, and disadvantages of multiple advanced linear and non linear signal processing methods, and includes analytical case studies of existing plants. This combination makes Linear and Non-Linear Stability Analysis in Boiling Water Reactors a valuable resource for nuclear engineering students focusing on linear and non-linear analysis, as well as for those working and researching in a nuclear power capacity looking to implement stability methods and estimate decay ratios using non-linear techniques.

Explores the nuclear stability of Boiling Water Reactors based on linear and non-linear models Evaluates linear signal processing methods such as autoregressive models, Fourier-based methods, and wavelets to calculate decay ratios Proposes novel non-linear signal analysis techniques linked to non-linear stability indicators Includes case studies of various existing nuclear power plants as well as mathematical models and simulations